MV-1 Series
Miniature Vaporizing Pressure Regulator
Introduction
The MV-1 Series Miniature Vaporizing Regulator
is one of the smallest envelopes in the industry.
Weighing in at a scant 0.86 pounds, the MV-1
is designed to supply heat to samples entering
instrumentation systems where space is at a
premium and quality cannot be compromised.
It can be used to preheat liquids, to prevent
condensation of gases or to vaporize liquids
prior to gas analysis.
Typical Applications
Features & Benefits
Analytical process sample conditioning systems:
• Petrochemical refineries
• Chemical production facilities
• Pilot plants (chemical & petrochemical)
• Portable low voltage analyzers
• Electro polished body with better than 25 Ra finish
in diaphragm cavity for an optimal sealing surface
• Bubble-tight shutoff
• Unique Spiro-Wind heating element provides
exceptionally even heating
• Available in 12 VDC and 24 VDC
• Optional TCO heating cartridge and proportional
controller
Technical Data
CONSTRUCTION
OUTLET PRESSURES
OPERATING TEMPERATURE
HEATING CAPACITY
RANGES (IN WATTS)
316L stainless steel
0–10, 0–25, 0–50, 0–100, 0–250, and
0–500 psig
up to 380° F (193° C)
40 and 100
GO Regulator
405 Centura Court • PO Box 4866 (29305) • Spartanburg, SC 29303
Phone (864) 574-7966 Fax (864) 574-5608
www.goreg.com • sales@goreg.com
pressure regulators
The pressure control section of the MV-1 is
patterned after the time-tested design of our
CPR-1 and provides the same excellent outlet
pressure stability. The heating plate utilizes
GO Regulator’s unique heating element and
incorporates an optional Thermal Cutout
Device (TCO). This device prevents any exposed
surface of the unit from exceeding 200° C under
normal or fault conditions and is exclusive to
GO Regulator’s line of electrically heated
vaporizing regulators. Offered in both 12 VDC
and 24 VDC, the MV-1 Series offers the utmost
in unequalled system safety and performance.
MV-1 Series
How to Order
Standard items in bold
MV – 1 A B 2 3 B 3 E H D 1
BODY MATERIAL
1 316L stainless steel
4 Monel®
CAP STYLE
1 Tamper-proof, stainless steel
4 Tamper-proof, panel mount, stainless steel
PORT CONFIGURATION
A Standard
For more configurations, see page 33
CAVITY O-RING MATERIAL
D Viton®
I
PTFE
PORT TYPE
0 1⁄8˝ FNPT (all ports)
A 1⁄16˝ FNPT (all ports)
B 1⁄8˝ FNPT inlets; 1⁄16˝ FNPT outlets
SEAT MATERIAL
A Tefzel®
B CF PTFE
C Polyimide
H PCTFE (formerly Kel-F® 81)
Q PEEK™
TEMPERATURE RANGE
1 55° F to 85° F
2 75° F to 175° F
3 130° F to 300° F
4 260° F to 380° F (Non TCO units only)
OUTPUT RANGE
C 0–10 psig
D 0–25 psig
E 0–50 psig
G 0–100 psig
I
0–250 psig
J
0–500 psig
HEATER WATTAGE
1 40W
2 40W with thermal cutout (TCO)
3 100W
4 100W with thermal cutout (TCO)
FLOW COEFFICIENT (Cv)
3 0.06
C 0.025
HEATER VOLTAGE
B 12 VDC
C 24 VDC
NOTE: The choices above represent an abbreviated list of the more commonly
ordered options. For a complete listing of all available options, please
see the Selection Wizard on the GO website at www.goreg.com or
contact the factory.
Maximum Temperature & Operating Inlet Pressures
SEAT MATERIAL
Tefzel®
High density PTFE
PCTFE
(formerly Kel-F®)
Polyimide
PEEK™
MAXIMUM PRESSURE
Up to 175° F (80° C)
176° F to 300° F
(80° C to 148° C)
301° F to 380° F
(148° C to 193° C)
Up to 175° F (80° C)
176° F to 300° F
(80° C to 148° C)
301° F to 380° F
(148° C to 193° C)
@
@
MAXIMUM OPERATING INLET PRESSURE
3600 psig (24.82 MPa)
@
1000 psig (6.90 MPa)
@
400 psig (2.76 MPa)
@
3600 psig (24.82 MPa)
@
1000 psig (6.90 MPa)
@
400 psig (2.76 MPa)
Up to 380° F (193° C)
@
3600 psig (24.82 MPa)
Up to 380° F (193° C)
Up to 380° F (193° C)
@
@
3600 psig (24.82 MPa)
3600 psig (24.82 MPa)
GO Regulator Vaporizing Pressure Regulators
25
MV-1 Series
Outline and Mounting Dimensions
4
6
2
7
1
1234-
GO REGULATOR
P/N 110930
12 VDC-RANGE B
5
3
75°F / 24°C
80°F / 27°C
85°F / 29°C
95°F / 35°C
1
567-
2
110°F / 43°C
130°F / 54°C
175°F / 79°C
D.C. IN
+
3
4
3.34"
Ø 1.50
4
3
2
1
0.85"
6 ± 0.25
Ø 1.62
Outlet
Weight = 0.86lbs
Inlet
0.06 Cv and Panel Mount Options
Panel mount option requires
1.39 (35.3mm) minimum
diameter panel cut out
26 GO Regulator Vaporizing Pressure Regulators