FINA Bidirectional
LED Bidirectional 48” Architectural Round /
Pendant Mount
Regress Convex (CR)
Regress Satine (AR)
Convex (C)
Satine (A)
Drop Convex (CL)
Drop Satine (AL)
Project Name
Date
Catalog Number
Type
Daylight
Sensor
CONSTRUCTION Alumimum housing is rolled
and welded for seamless finish with 1/4” (6.4mm) trim.
Aluminum top
cover conceals
components. Highly reflective die-formed white painted steel reflector.
MR16 all electrical
Corners
ELECTRICAL Electronic, 120 to 277 volt input and 36V output. 0-10 volt dimming. Direct and Indirect are separate
sources. Must specify 1D for dimming in the circuiting options of the part number.
4-1/2”tested in accordance with IES LM-80.
LED White LED configurations tested in accordance with IES LM-79. Diodes
R9≥20, 2700K = CRI≥90; 3000K, 3500K and 4000K = CRI≥82. Minimum(114.3mm)
lifetime greater than 60,000 hours.
LENS White virgin acrylic lens with matte finish, removable for LED access. Select from flat, concave or convex design.
Lens (VR)
available in 3 positions: flush, regressed,
or (862mm)
dropped. Specify in the shielding section of part number. Indirect
33-15/16”
Regress Concave
Staggered
portion has frosted lens for Staggered
white light and clear lens for RGB only.
Lamps
Lamps
MOUNTING Pendant pipe mount available. Fixture mounts directly to a standard junction box. Refer to installation
instructions for appropriate ceiling detail. Canopies and pendants are white unless otherwise specified.
ConcaveFINISH
(V)
Standard powder-coat textured white, metallic silver, textured black or bronze painted finish, consult factory
for chip of standard paint finishes.
Pendants and canopies painted white unless specified differently in the options
Staggered
Staggered
Lamps
section of the part number. Lamps
Contact factory for additional custom color and finish options.
WARRANTY Fina offered with a 5-year limited warranty. Covers LED, driver and fixture.
Drop Concave (VL)
LABELS UL and cUL Listed, approved for dry/damp location unless otherwise noted.
Year LED
Warranty
Year LED
Warranty
Staggered
Lamps
Regress Convex (CR)
LFL
LED
Regress Satine Convertible
(AR)
LFL
Convertible
Convertible
LED
LFL
Convex (C)
Satine (A)
Concave (V)
Lowered Convex (CL)
Lowered Satine (AL)
Lowered Concave (VL)
LED
LED
Regress Concave (VR)
Convertible
LFL
Staggered
Lamps
4-1/2”
(114.3mm)
45-15/16” (1166.8mm)
Year LED
Warranty
L U M I N A I R E S P E C I F I C AT I O N
F48B-
__-
____-
____-
HOUSING
SHIELDING
DIRECT
PACKAGE1
INDIRECT
PACKAGE1
F48B- Fina 48” diameter, Bidirectional
AARALVVLCCRCL-
_______LFL
Convertible
Sample Catalog #: F48B-A-35HO-35-PP12JB-120-1C-W
___-
MOUNTING LED VOLTAGE
Pendant Pipe (12”, 18”, 24”)4
PP__JB- Pendant Pipe to J-Box
PP__ST- Pendant Pipe to Structure
PS__JB- Pendant Swivel to J-Box
PS__ST- Pendant Swivel to Structure
Satine Lens
Regress Satine Lens
Lowered Satine Lens
Concave Lens
Lowered Concave Lens
Convex Lens
27K Color Temperature Lumen Options
Regress Convex Lens
Direct, 8,475 lumens, 135.3 watts
Lowered Convex Lens 2730K Color Temperature Lumen Options
30Direct, 10,309 lumens, 135.3 watts
35K Color Temperature Lumen Options
35Direct, 10,773 lumens, 135.3 watts
40K Color Temperature Lumen Options
40Direct, 11,049 lumens, 135.3 watts
RGB LED Options2
RGBX- RGB LED with DMX Module
Dual LED Options (Consult factory for available options)3
D____X- Dual LED with RGB-DMX Module
(Dual LED options require 2 circuits)
Custom Output (Consult factory for available options)
CL_____- Specify color temp. and lumens
CW____- Specify color temp. and wattage
__-
__-
____
CIRCUITING
FINISH
OPTIONS
LED
Convertible
LFL
120- 120 V
277- 277 V
347- 347 V5
UNV- UNV (120-277)
27K Color Temperature Lumen Options
27Indirect, 7,613 lumens, 133.5 watts
30K Color Temperature Lumen Options
30Indirect, 9,261 lumens, 133.5 watts
35K Color Temperature Lumen Options
35Indirect, 9,677 lumens, 133.5 watts
40K Color Temperature Lumen Options
40Indirect, 9,925 lumens, 133.5 watts
RGB LED Options2
RGBX- RGB LED with DMX Module
Dual LED Options (Consult factory for available options)3
D____X- Dual LED with RGB-DMX Module
(Dual LED options require 2 circuits)
Custom Output (Consult factory for available options)
CL_____- Specify color temp. and lumens
CW____- Specify color temp. and wattage
W- Matte White
S- Metallic Silver6
BL- Textured Black6
BR- Bronze6
CC- Custom Color6
GLR- Fusing
AM- Antimicrobial Paint
SW- Step Switching
Consult Factory
CC-C- Custom Color Canopy6
CC-P- Custom Color Pendant7
See back page for circuiting descriptions.
1C2C1D2D1B2B-
Single Circuit
Dual Circuit
Single Circuit Dimming
Dual Circuit Dimming
Single Circuit with Battery Pack5
Dual Circuit with Batter Pack5
Lumen numbers reflect delivered lumens. 2Osram/Sylvania Color Changing RGB LED and components are for accent or decorative lighting and does not provide room illumination. See back page for more information. 3Dual LED option is
both white LED and RGB LED. White LED and RGB to be on separate circuits. Use “____” in the part number to specify the lumen package for the “white” LEDs only, i.e. D35HOX. See back page for more information. 4Must specify pendant
length, i.e. PP12JB. Consult factory for additional pendant lengths. 5Battery not available with 347v. 6If canopy is to match fixture housing, must specify in option section using CC-C. If not specified canopy will be standard matte white. 7If
pendant is to match fixture housing, must specify in option section using CC-P. If not specified pendant will be standard matte white.
1
®
Pinnacle Architectural Lighting 12655 East 42nd Avenue, Suite 50 Denver, CO 80239
Phone 303.322.5570
Fax 303.322.5568 www.pinnacle-ltg.com
© 2015 Pinnacle Architectural Lighting®
October 2015
Specifications and dimensions subject to change without notice. Specification sheets that appear on pinnacle-ltg.com are the most recent version and supersede all other previously printed or electronic versions.
s: 12,953
Exposed Flanged: Metal Pan or Millwork: Drywall, Flangeless:
Specify FL in part # Specify NF in part #
Specify SF in part #
PHOTOMETRY
FINA SUSPENDED PP
3798
2849
1889
950
Test#: ITL82291-RevB
AC3
AH4
(3Part
Aircraft
Cables Angled to Fixture) (4 Aircraft Cables with Hub to Fixture)
#: F48B-40-40
Lumens per watt: 78
Must specify 48” or 120” adjustable aircraft cable length (i.e, AC348JB)
Total
Delivered Lumens: 20,974
Test data reflects efficacy improvements since initial test.
MOUNTING DETAILS
TOP VIEW
CANOPY INSTALLATION
STANDARD CANOPY
FLUSH CANOPY
The canopy can be installed either
below the ceiling plane or semirecessed into the ceiling for a flush
mount installation. No specification
required. Standard kit can be installed
either way. (Flush canopy installation is not
available for fixtures installed below a grid
rail.)
PP
(Pendant Pipe)
Must specify overall pendant length of 12”,
18” or 24” (i.e, PP18JB)
CIRCUITING
INFORMATION
3/8”
Fina is provided with either 3 or
6 wire power drops depending
on specified circuiting. In some
S
instances, 2 power drops may be
required (additional charges may
apply). Following are the standard
circuiting options and the required
number of power drops. Consult
factory for any circuiting option not
listed below for details on required
number of drops.
DIRECT
INDIRECT
CIRCUIT
DESCRIPTION
AVAILABLE
White LED
White LED
White LED
White LED
White LED
White LED
White LED
White LED
White LED
RGB
RGB
RGB
RGB
RGB
White LED
White LED
White LED
White LED
White LED
White LED
RGB
RGB
RGB
White LED
White LED
White LED
RGB
RGB
1C
2C
1D
2D
1B
2B
2C
2D
2B
2C
2D
2B
1C
2C
Direct & Indirect on same circuit
Direct & Indirect on separate circuits
Direct dimmed & Indirect dimmed, same circuit
Direct dimmed & Indirect dimmed, separate circuits
Direct & Indirect on same circuit, one battery
Direct & Indirect on separate circuits, one battery
Direct & Indirect on separate circuits
Direct dimmed & Indirect on separate circuits
Direct & Indirect on separate circuits, one battery
Direct and Indirect on separate circuits
Direct & Indirect dimmed on separate circuits
Direct & Indirect on separate circuits, one battery
Direct & Indirect on same circuit
Direct & Indirect on separate circuits
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Please consult factory for all Dual LED Options (White LED and RGB) as well as configurations with Step Switching.
R G B
COLOR CHANGING LED
APPLICATION: RGB LED is ideal for accent or decorative lighting and uses a Red, Green and Blue LED multi chip for color mixing.
TECHNICAL: RGB LED flexible linear strips are installed on the perimeter of the fixture housing and wired to a DMX interface
that leaves factory with 3 bare wires for field connection. (DMX+, DMX-, and DMX GND.)
ELECTRICAL: 75w max wattage electronic driver. Wattage output is 64.8w.
LABELS: UL and cUL Listed, approved for dry/damp location unless otherwise noted.
ORDERING INFORMATION: Specify RGBX in the color/lumens section of the part number.
Sample Catalog #: F48B-A-40-RGBX-PP12JB-120-1C-W.
RGB with DMX: Provides digital compatibility for integrating RGB color with 3 channel dimming and control with a DMX
system or controller using DMX-512 or DMX-512A protocol.
®
Pinnacle Architectural Lighting 12655 East 42nd Avenue, Suite 50 Denver, CO 80239
Phone 303.322.5570
Fax 303.322.5568
www.pinnacle-ltg.com
© 2015 Pinnacle Architectural Lighting®
October 2015
Specifications and dimensions subject to change without notice. Specification sheets that appear on pinnacle-ltg.com are the most recent version and supersede all other previously printed or electronic versions.