grEAsE gUns 4 years worldwide guarantee* on the function of all UMETA TWIN-LOCK * Subject to our guarantee terms and conditions which can be found at www.umeta.com ® grease guns UMETA grease guns stand for highest quality and reliability. We are certain of the quality of UMETA products and have a guaranty of four years for all UMETA TWINLOCK® grease guns with respect to function. Accurate manufacturing, high quality materials and intelligent product features turn our guns into effective precision tools that effortlessly reach high lubricating pressures. UMETA TWIN-LOCK® grease guns will be delivered with a user's manual, either in a polybag, or in a coloured cardboard box. All UMETA TWIN-LOCK® grease guns for 400g (14.0 oz.) grease cartridges comply with DIN 1283 as regards physical dimensions and performance and are suitable for grease cartridges according to DIN 1284. Our grease guns 75/PK und 75/PL are DLg-certified Of course, our quality management is IsO 9001-2008-certified UMETA grE AsE gUns – A DvA N TAgEs AT A gL A NCE · UMETA TWIN-LOCK® system · rolled coarse thread for high stability and easy dissassembly · special pressure stability by cast aluminium head and thick-walled barrel · easy insertion of the plunger into the cartridge by a bulge in the barrel · inner cartridge stopper · stable hand lever with security handle · ergonomic T-grip with jam protection · knurled barrel for better hold and grip · separate air release valve or filler valve · special constructions available · colours and imprints as per customer's request · individual packaging · high wearing security · even after 30,000 strokes no wear is detectable · available according to DIN 1283 · wide range of accessories 6 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com email: sales@mdmetric.com ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 RFQ form: http://mdmetric.com/rfq.htm grease guns UMETA T WIn - LO CK ® -sysTEM – T hE L IFE INsUR A NCE FOR YOUR M AChINEs A ND EqUIPMEN T When maintaining your high quality machines and equipment, you should absolutely avoid quasi-lubrication! What does quasi-lubrication mean? Upon continuous operation, abrasion can easily take place between the metal piston and the metal cylinder of the grease gun. For this reason, the grease at the top of the piston can be pressed back into the cartridge at a low operating pressure without being noticed. In spite of all efforts, no grease will be transported to the lubrication spot. In order not to expose your machines to this risk, we developed the UMETA TWIN-LOCK® system. In connection with two special sealing elements, it protects the precision piston from wear upon continuous operation. By the special arrangement of the sealing elements, the UMETA TWIN-LOCK® system avoids quasi- without UMETA TWIN-LOCK® system with UMETA TWIN-LOCK® system lubrication and grease escaping the piston. The sealing elements are designed in a way that they adjust themselves to the corresponding operating pressure with respect to their sealing effect. For this unique advantage UMETA grease guns are worldwide renowned. UMETA EvEr- FLOW sysTEM The patented EvER-FLOW system invented by UMETA ensures perfect functioning of the UMETA TWIN-LOCK® gun, even with thick grease and at the lowest temperatures. This is ensured by an outlet valve equipped with a special ball stopper. Even semifluid biological grease will easily be transported by the vacuum developing during the pumping process. This is another advantage of UMETA's, where many other competitors' products fail. UMETA grE AsE gUn KITs The well-established UMETA accessories for grease guns offer you the optimal solution for any application. We assembled the most common grease gun kits, which consist of the UMETA grease gun of your choice and the following standard accessory parts. Basically, you can equip any grease gun with the accessory parts of your choice. You will find our complete accessories list in our chapter ”UMETA Accessories for grease guns“. Our most common standard kits: 110/g – nozzle tube with hydraulic coupling grease gun equipped with standard air release valve 340/gLN – hose 300 mm (12") with hydraulic coupling grease gun equipped with standard filler valve grease gun equipped with standard filler valve and nozzle tube Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com email: sales@mdmetric.com ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 RFQ form: http://mdmetric.com/rfq.htm 7 HAnd LEvEr grE AsE gUns 75/PK silver Hand Lever grease gun with high quality silver painted steel barrel · for 400 g (14.0 oz.) grease cartridges or 500 ccm (16.0 oz.) bulk grease · with UMETA TWIN-LOCK® system and patented EvER-Flow system · standard air release valve, alternatively with filler valve according to DIN 1283 barrel version silver painted steel barrel – DIN 1283 special colours available Ø 56 mm (2.2") 296 mm (11.6") grease up to NLgI 3 400 g (14.0 oz.) grease cartridge / 500 ccm (16.0 oz.) bulk grease M 10 x 1 oder g 1/8 upon request 1/8 NPT barrel length suitable for filling capacity connection thread Connection M 10 x 1 M 10 x 1 M 10 x 1 M 10 x 1 M 10 x 1 M 10 x 1 M 10 x 1 M 10 x 1 M 10 x 1 M 10 x 1 Packed in polybag polybag polybag polybag polybag cardboard box cardboard box cardboard box cardboard box cardboard box Scope of delivery without accessories with 340/gLN with 110/g with 110/g + 340/gLN with filler valve without accessories with 340/gLN with 110/g with 110/g + 340/gLN with filler valve Ref. No.: v000286 v000281 v000333 v000524 v000342 v000306 v000308 v000378 v000717 v000319 operating pressure output testing pressure gun dimension packed in weight 400 bar / 5,800 PsI approx. 1.9 ccm (0.06 oz.)/stroke 800 bar / 11,600 PsI 400 x 128 x 60 mm (15.7 x 5.0 x 2.36") printed UMETA polybag or printed UMETA cardboard box net 1,250 g (44.1 oz.) + accessories and packaging * special version USA Connection g 1/8 g 1/8 g 1/8 g 1/8 g 1/8 g 1/8 g 1/8 g 1/8 g 1/8 g 1/8 1/8 NPT 1/8 NPT 1/8 NPT Packed in polybag polybag polybag polybag polybag cardboard box cardboard box cardboard box cardboard box cardboard box polybag polybag cardboard box Scope of delivery without accessories with 340/gLN with 110/g with 110/g + 340/gLN with filler valve without accessories with 340/gLN with 110/g with 110/g + 340/gLN with filler valve with 95/g with filler valve* and 95/g with filler valve* and 95/g Ref. No.: v000287 v000276 v000456 v001174 v001045 v000402 v000449 v000535 v001176 v000495 v000667 v000616 v000403 75/PK Zinc Hand Lever grease gun with high quality zinc-plated steel barrel · for 400 g (14.0 oz.) grease cartridges or 500 ccm (16.0 oz.) bulk grease · with UMETA TWIN-LOCK® system and patented EvER-Flow-system · standard air release valve, alternatively with filler valve according to DIN 1283 barrel version barrel length suitable for filling capacity connection thread Connection M 10 x 1 M 10 x 1 M 10 x 1 M 10 x 1 M 10 x 1 M 10 x 1 M 10 x 1 M 10 x 1 M 10 x 1 M 10 x 1 8 made of zinc-plated steel – DIN 1283 special colours available Ø 56 mm (2.2") 296 mm (11.6") grease up to NLgI 3 400 g (14.0 oz.) grease cartridge / 500 ccm (16.0 oz.) bulk grease M 10 x 1 or g 1/8 upon request 1/8 NPT Packed in polybag polybag polybag polybag polybag cardboard box cardboard box cardboard box cardboard box cardboard box Scope of delivery without accessories with 340/gLN with 110/g with 110/g + 340/gLN with filler valve without accessories with 340/gLN with 110/g with 110/g + 340/gLN with filler valve Ref. No.: v000301 v000309 v000860 v001167 v000432 v000310 v000573 v000567 v001166 v000358 operating pressure output testing pressure gun dimension packed in weight Connection g 1/8 g 1/8 g 1/8 g 1/8 g 1/8 g 1/8 g 1/8 g 1/8 g 1/8 g 1/8 400 bar / 5,800 PsI approx. 1.9 ccm (0.06 oz.)/stroke 800 bar / 11,600 PsI 400 x 128 x 60 mm (15.7 x 5.0 x 2.36") printed UMETA polybag or printed UMETA cardboard box net 1,250 g (44.1 oz.) + accessories and packaging Packed in polybag polybag polybag polybag polybag cardboard box cardboard box cardboard box cardboard box cardboard box Scope of delivery without accessories with 340/gLN with 110/g with 110/g + 340/gLN with filler valve without accessories with 340/gLN with 110/g with 110/g + 340/gLN with filler valve Ref. No.: v000349 v001408 v001182 v001181 v001249 v001172 v001409 v001185 v001184 v001250 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com email: sales@mdmetric.com ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 RFQ form: http://mdmetric.com/rfq.htm grease guns 75/PL Zinc Hand Lever grease gun with extended zinc-plated steel barrel · for 500 g (17.5 oz.) grease cartridges or 600 ccm (20 oz.) bulk grease · with UMETA TWIN-LOCK® system and patented EvER-Flow system · standard air release valve, alternatively with filler valve according to DIN 1283 barrel version made of zinc-plated steel Ø 56 mm (2.2") 370 mm (14.6") grease up to NLgI 3 500 g (17.5 oz.) grease cartridge/600 ccm (20 oz.) bulk grease M 10 x 1 or g 1/8 upon request 1/8 NPT barrel length suitable for filling capacity connection thread Connection M 10 x 1 M 10 x 1 M 10 x 1 M 10 x 1 M 10 x 1 M 10 x 1 M 10 x 1 M 10 x 1 M 10 x 1 M 10 x 1 Packed in polybag polybag polybag polybag polybag cardboard box cardboard box cardboard box cardboard box cardboard box Scope of delivery without accessories with 340/gLN with 110/g with 110/g + 340/gLN with filler valve without accessories with 340/gLN with 110/g with 110/g + 340/gLN with filler valve Ref. No.: v000662 v000810 v000803 v001199 v001197 v000439 v001422 v001460 v000525 v000486 75/LL Zinc operating pressure output testing pressure gun dimension packed in 400 bar / 5,800 PsI approx. 1.9 ccm (0.06 oz.)/stroke 800 bar / 11,600 PsI 475 x 128 x 60 mm (18.7 x 5.0 x 2.36") printed UMETA polybag or printed UMETA cardboard box net 1,450 g (51.5 oz.) + accessories and packaging weight Connection g 1/8 g 1/8 g 1/8 g 1/8 g 1/8 g 1/8 g 1/8 g 1/8 g 1/8 g 1/8 Packed in polybag polybag polybag polybag polybag cardboard box cardboard box cardboard box cardboard box cardboard box Scope of delivery without accessories with 340/gLN with 110/g with 110/g + 340/gLN with filler valve without accessories with 340/gLN with 110/g with 110/g + 340/gLN with filler valve Ref. No.: v001093 v001201 v001129 v001200 v001198 v001461 v001462 v001463 v001464 v001465 Hand Lever grease gun with extra long zinc-plated steel barrel · for 1,000 ccm (32.0 oz.) bulk grease · with UMETA TWIN-LOCK® system and patented EvER-Flow system · standard air release valve, alternatively with filler valve according to DIN 1283 barrel version barrel length suitable for filling capacity connection thread Connection M 10 x 1 M 10 x 1 M 10 x 1 M 10 x 1 M 10 x 1 operating pressure output testing pressure gun dimension packed in weight made of zinc-plated steel Ø 56 mm (2.2") 445 mm (17.5") grease up to NLgI 3 1,000 ccm (32 oz.) bulk grease M 10 x 1 or g 1/8 upon request 1/8 NPT Packed in polybag polybag polybag polybag polybag Scope of delivery without accessories with 340/gLN with 110/g with 110/g + 340/gLN with filler valve Ref. No.: v000647 v000941 v001213 v001212 v000938 Connection g 1/8 g 1/8 g 1/8 g 1/8 g 1/8 400 bar / 5,800 PsI approx. 1.9 ccm (0.06 oz.)/stroke 800 bar / 11,600 PsI 552 x 128 x 60 mm (21.7 x 5.0 x 2.36") printed UMETA polybag net 1,660 g (58.5 oz.) + accessories and packaging Packed in polybag polybag polybag polybag polybag Scope of delivery without accessories with 340/gLN with 110/g with 110/g + 340/gLN with filler valve Ref. No.: v000648 v001233 v001232 v001229 v001214 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com email: sales@mdmetric.com ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 RFQ form: http://mdmetric.com/rfq.htm 9 75/PKU UMETA TWIn-LOCK® Ultra gun top model, which combines quality, function and design · for 400 g (14.0 oz.) grease cartridges or 500 ccm (16.0 oz.) bulk grease · ergonomic grips made of anti-slip material · with UMETA TWIN-LOCK® system and patented EvER-Flow system · filler valve, DIN 1283 included · UMETA multi colour cardboard box barrel version barrel length suitable for filling capacity connection thread Connection M 10 x 1 M 10 x 1 M 10 x 1 M 10 x 1 made of zinc-plated steel Ø 56 mm (2.2") 295 mm (11.6") grease up to NLgI 3 400 g (14.0 oz.) grease cartridge / 500 ccm (16.0 oz.) bulk grease M 10 x 1 or g 1/8 upon request 1/8 NPT Packed in cardboard box cardboard box cardboard box cardboard box Scope of delivery without accessories with 340/gLN with 110/g with 110/g + 340/gLN Ref. No.: 7021312 6800130 7751511 6800140 operating pressure output testing pressure gun dimension packed in 400 bar / 5,800 PsI approx. 1.9 ccm (0.06 oz.)/stroke 800 bar / 11,600 PsI 400 x 135 x 75 mm (15.7 x 5.3 x 3.0") printed UMETA cardboard box portable carrying case 1,300 g (45.8 oz.) + accessories and packaging weight Connection g 1/8 g 1/8 g 1/8 g 1/8 Packed in cardboard box cardboard box cardboard box cardboard box Scope of delivery without accessories with 340/gLN with 110/g with 110/g + 340/gLN Ref. No.: 7021411 7752611 7751611 7759611 UMETA TWIn-LOCK® Ultra Case Kit The complete lubricating equipment in a handy carrying case. The carrying case contains everything you need for lubricating anything, especially our UMETA TWIn-LOCK® Ultra grease gun 75/PKU according to dIn 1283. The carrying case kit comes with the practical UMETA hose parking unit. The grease gun can be hung up on the wall by the provided wall bracket, and is thus always at hand. With the many accessories, you will be prepared for any needed application. Accessories kit, consisting of: · hydraulic hose 340/gLN · nozzle tube 110/g · hydraulic coupling 515/g-4 · quick-adapter, short version 200/M 4, 200/M 1, 200/M 22, 200/s, 200/Xs · grease nipple assortment 60s, each 5 pcs. h1/h2/h3 6 x 1, 8 x 1, 10 x 1, R 1/8 · grease cartridge 400 g (14.0 oz.) · hose parking unit at hand lever · wall bracket Connection M 10 x 1 g 1/8 10 Packaging carrying case carrying case Scope of delivery complete accessories complete accessories Ref. No.: 6900096 6900098 case without content Ref. No.: 6900095 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com email: sales@mdmetric.com ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 RFQ form: http://mdmetric.com/rfq.htm grease guns 70/PK Hand Lever grease gun with shock-resistant polyamide barrel · for 400 g (14.0 oz.) grease cartridges or 500 ccm (16.0 oz.) bulk grease · with UMETA TWIN-LOCK® system and patented EvER-Flow system · standard air release valve, alternatively with filler valve according to DIN 1283 The extremely light polyamide barrel with the extra band knurls ensures optimal and comfortable handling, even with cold temperatures. The robust material combines the advantages of rust-resistancy and form stability, even with crashes and other impacts. barrel version barrel length suitable for filling capacity connection thread Connection M 10 x 1 M 10 x 1 M 10 x 1 M 10 x 1 M 10 x 1 M 10 x 1 M 10 x 1 M 10 x 1 M 10 x 1 M 10 x 1 shock-resistand polyamide barrel Ø 60 mm (2 1/3") 292 mm (11 ½") grease up to NLgI 3 400 g (14.0 oz.) grease cartridge/500 ccm (16.0 oz.) bulk grease M 10 x 1 or g 1/8 upon request 1/8 NPT Packed in polybag polybag polybag polybag polybag cardboard box cardboard box cardboard box cardboard box cardboard box Scope of delivery without accessories with 340/gLN with 110/g with 110/g + 340/gLN with filler valve without accessories with 340/gLN with 110/g with 110/g + 340/gLN with filler valve Ref. No.: v000354 v000472 v000550 v001002 v000790 v000350 v000952 v000881 v001118 v001466 73/PK operating pressure delivery capacity testing pressure gun dimension packed in weight Connection g 1/8 g 1/8 g 1/8 g 1/8 g 1/8 g 1/8 g 1/8 g 1/8 g 1/8 g 1/8 400 bar / 5,800 PsI approx. 1.9 ccm (0.06 oz.)/stroke 800 bar / 11,600 PsI 400 x 128 x 60 mm (15.7 x 5.0 x 2.36") printed UMETA polybag or printed UMETA cardboard box 1,000 g (35.3 oz.) + accessories and packaging Packed in polybag polybag polybag polybag polybag cardboard box cardboard box cardboard box cardboard box cardboard box Scope of delivery without accessories with 340/gLN with 110/g with 110/g + 340/gLN with filler valve without accessories with 340/gLN with 110/g with 110/g + 340/gLN with filler valve Ref. No.: v000443 v000637 v001095 v001211 v001251 v000645 v000842 v001094 v001467 v001468 Hand Lever grease gun wirth shortened zinc-plated steel barrel · for 300 ccm (10.0 oz.) bulk grease · with UMETA TWIN-LOCK® system and patented EvER-Flow system · standard air release valve, alternatively with filler valve according to DIN 1283 barrel version barrel length suitable for filling capacity connection thread Connection M 10 x 1 M 10 x 1 M 10 x 1 M 10 x 1 M 10 x 1 M 10 x 1 M 10 x 1 M 10 x 1 M 10 x 1 M 10 x 1 operating pressure delivery capacity testing pressure gun dimension packed in made of zinc-plated steel Ø 56 mm (2.2") 200 mm (7.87") grease up to NLgI 3 300 ccm (10.0 oz.) bulk grease M 10 x 1 or g 1/8 upon request 1/8 NPT Packed in polybag polybag polybag polybag polybag cardboard box cardboard box cardboard box cardboard box cardboard box Scope of delivery without accessories with 340/gLN with 110/g with 110/g + 340/gLN with filler valve without accessories with 340/gLN with 110/g with 110/g + 340/gLN with filler valve weight Ref. No.: v000211 v000549 v000773 v001220 v001218 v000479 v001479 v001096 v001480 v000457 Connection g 1/8 g 1/8 g 1/8 g 1/8 g 1/8 g 1/8 g 1/8 g 1/8 g 1/8 g 1/8 400 bar / 5,800 PsI approx. 1.9 ccm (0.06 oz.)/stroke 400 bar / 5,800 PsI 345 x 128 x 60 mm (13.6 x 5.0 x 2.36") printed UMETA polybag or cardboard box 1,075 g (37.9 oz.) + accessories and packaging Packed in polybag polybag polybag polybag polybag cardboard box cardboard box cardboard box cardboard box cardboard box Scope of delivery without accessories with 340/gLN with 110/g with 110/g + 340/gLN with filler valve without accessories with 340/gLN with 110/g with 110/g + 340/gLN with filler valve Ref. No.: v000993 v001227 v001054 v001224 v001219 v001481 v001024 v001097 v001482 v000458 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com email: sales@mdmetric.com ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 RFQ form: http://mdmetric.com/rfq.htm 11 75/PKM Hand Lever grease gun with pressure gauge · pressure gauge grease gun for the exact control of the lubricating pressure in order to protect pressure-sensitive components, bearings and gaskets · for 400 g (14.0 oz.) grease cartridges or 500 ccm (16.0 oz.) bulk grease · with high quality zinc-plated steel barrel · with UMETA TWIN-LOCK® system und patented EvER-Flow system · standard air release valve, alternatively with filler valve according to DIN 1283 optionally available: gun head with pressure release pressure gauge barrel length suitable for filling capacity connection thread pressure range up to 400 bar / 5,800 PsI alternatively with pressure range up to 1,000 bar / 14,500 PsI available with or without pressure release device made of zinc-plated steel special colours available Ø 56 mm (2.2") barrel version pressure gauge up to 400 bar Connection M 10 x 1 M 10 x 1 g 1/8 g 1/8 Packed in polybag polybag polybag polybag 296 mm (11.6") grease up to NLgI 3 400 g (14.0 oz.) grease cartridge / 500 ccm (16.0 oz.) bulk grease M 10 x 1 or g 1/8 upon request 1/8 NPT 400 bar / 5,800 PsI approx. 1.9 ccm (0.06 oz.)/stroke 800 bar / 11,600 PsI 480 x 130 x 60 mm (18.9 x 5.1 x 2.36") printed UMETA polybag 1,555 g (54.8 oz.) + accessories and packaging operating pressure output testing pressure gun dimension packed in weight pressure gauge up to 1,000 bar Pressure release without with without with Ref. No.: v000485 v000712 v000859 v000391 EcoLube Connection M 10 x 1 M 10 x 1 g 1/8 g 1/8 Packed in polybag polybag polybag polybag Pressure release without with without with Ref. No.: v000978 v000545 v000499 v000392 Hand Lever grease gun · for 400 g (14.0 oz.) grease cartridges or 500 ccm (16.0 oz.) bulk grease · according to DIN 1283 · comes with filler valve The light steel body, the ergonomically formed hand lever, and extra band knurls on the barrel ensure optimal handling. barrel version blue painted steel barrel RAL 5026 Ø 56 mm (2.2") 287 mm (11.3") grease up to NLgI 3 400 g (14.0 oz.) grease cartridge / 500 ccm (16.0 oz.) bulk grease M 10 x 1 or g 1/8 barrel length suitable for filling capacity connection thread Connection M 10 x 1 M 10 x 1 12 Packed in polybag polybag Scope of delivery without accessories with extension tube and hydraulic coupler Ref. No.: 7000000 7000002 opperating pressure output testing pressure gun dimension packed in weight Connection g 1/8 g 1/8 Packed in polybag polybag 400 bar / 5,800 PsI approx. 1.4 ccm/stroke 600 bar / 8,700 PsI 390 x 120 x 55 mm (15.3 x 4.7 x 2.2") polybag 1,200 g (42.3 oz.) + accessories and packaging Scope of delivery without accessories with extension tube and hydraulic coupler Ref. No.: 7000003 7000005 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com email: sales@mdmetric.com ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 RFQ form: http://mdmetric.com/rfq.htm grease guns OnE- HAnd grE AsE gUns 85/PK Zinc One-Hand grease gun with high quality zinc-plated steel barrel · for 400 g (14.0 oz.) grease cartridges or 500 ccm (16.0 oz.) bulk grease · with UMETA TWIN-LOCK® system und patented EvER-Flow system · standard air release valve, alternatively with filler valve according to DIN 1283 This UMETA TWIN-LOCK® One-hand grease gun offers you many possibilities. The one-hand operation allows for lubricating even hard to reach spots. Our proven powerswitch system provides the opportunity to adjust the grease supply from high volume to high pressure. Just press the button on the handle, and you will obtain optimal performance. barrel version barrel length suitable for filling capacity connection thread made of zinc-plated steel, special colours available Ø 56 mm (2.2") 296 mm (11.6") grease up to NLgI 3 400 g (14.0 oz.) grease cartridge / 500 ccm (16.0 oz.) bulk grease M 10 x 1 or g 1/8, upon request 1/8 NPT upon adjustment to: operating pressure output volume approx. 150 bar / 2,175 PsI approc. 1.1 ccm/stroke Connection M 10 x 1 M 10 x 1 M 10 x 1 M 10 x 1 M 10 x 1 M 10 x 1 M 10 x 1 M 10 x 1 M 10 x 1 M 10 x 1 Packed in polybag polybag polybag polybag polybag cardboard box cardboard box cardboard box cardboard box cardboard box testing pressure gun dimension packed in weight dimensions (L x W x h) 200 bar / 2,900 PsI 403 x 170 x 60 mm (15.8 x 6.7 x 2.36") polybag or printed UMETA cardboard box 1,220 g (43.0 oz.) + accessories and packaging 405 x 172 x 77 mm pressure approx. 180 bar / 2,600 PsI approx. 0.7 ccm/stroke Scope of delivery without accessories with 340/gLN with 110/g with 110/g + 340/gLN with filler valve without accessories with 340/gLN with 110/g with 110/g + 340/gLN with filler valve Ref. No.: v000715 v000676 v001190 v001189 v000721 v000730 v000431 v001028 v001192 v000961 85/PK silver Connection g 1/8 g 1/8 g 1/8 g 1/8 g 1/8 g 1/8 g 1/8 g 1/8 g 1/8 g 1/8 Packed in polybag polybag polybag polybag polybag cardboard box cardboard box cardboard box cardboard box cardboard box Scope of delivery without accessories with 340/gLN with 110/g with 110/g + 340/gLN with filler valve without accessories with 340/gLN with 110/g with 110/g + 340/gLN with filler valve Ref. No.: v000369 v000809 v001195 v001194 v001187 v000548 v000858 v001157 v001196 v001188 One-Hand grease gun with high quality silver painted steel barrel · for 400 g (14.0 oz.) grease cartridges or 500 ccm (16.0 oz.) bulk grease · with UMETA TWIN-LOCK® system und patented EvER-Flow system · standard air release valve, alternatively with filler valve according to DIN 1283 Technical details above. Connection M 10 x 1 M 10 x 1 M 10 x 1 M 10 x 1 M 10 x 1 M 10 x 1 M 10 x 1 M 10 x 1 M 10 x 1 M 10 x 1 Packed in polybag polybag polybag polybag polybag cardboard box cardboard box cardboard box cardboard box cardboard box * special version USA Scope of delivery without accessories with 340/gLN with 110/g with 110/g + 340/gLN with filler valve without accessories with 340/gLN with 110/g with 110/g + 340/gLN with filler valve Ref. No.: v000382 v000538 v000997 v001469 v000772 v000210 v000507 v001136 v001470 v000454 Connection g 1/8 g 1/8 g 1/8 g 1/8 g 1/8 g 1/8 g 1/8 g 1/8 g 1/8 g 1/8 1/8 NPT 1/8 NPT Packed in polybag polybag polybag polybag polybag cardboard box cardboard box cardboard box cardboard box cardboard box polybag cardboard box Scope of delivery without accessories with 340/gLN with 110/g with 110/g + 340/gLN with filler valve without accessories with 340/gLN with 110/g with 110/g + 340/gLN with filler valve without accessories with filler valve* Ref. No.: v000371 v001471 v000768 v001472 v000704 v000420 v001473 v000771 v001474 v000421 v000617 v000640 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com email: sales@mdmetric.com ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 RFQ form: http://mdmetric.com/rfq.htm 13 AIr- OPEr ATEd grE AsE gUns drP 30 Air-operated grease gun · for 400 g (14.0 oz.) grease cartridges or 500 ccm (16.0 oz.) bulk grease · continuous grease flow · extra light and handy due to aluminium body with ergonomic handle · compressed air connection for quick coupling · comes with nozzle tube and hP hose according to DIN 1283 · comes with air release valve and separate filler valve (DIN standard) Inclusive extension tube and hose with hydraulic coupler barrel version barrel length suitable for filling capacity standard valve connection thread pressure ratio air pressure Connection g 1/8 14 made of zinc-plated steel DIN 1283 special colours available Ø 56 mm (2.2") 296 mm (11.6") grease up to NLgI 3 400 g (14.0 oz.) grease cartridge / 500 ccm (16.0 oz.) bulk grease air release valve and separate filler valve (DIN standard) g 1/8 40:1 3 – 7 bar, 43.5 – 100 PsI; recommended air pressure 6 bar/90 PsI Packed in cardboard box Scope of delievery complete with accessories: - hP hose Ø 13 (½") mm, 300 mm (12") length - nozzle tube 110/g each with hydraulic coupler operating pressure output testing pressure gun dimension packed in weight dimensions (L x Wx h) 280 bar / 4,060 PsI max. approx. 500 ccm/3 min. or 160 ccm (5.1 oz.)/min. 320 bar (4,640 PsI) 405 x 260 x 60 mm (15.9 x 10.2 x 2.36") printed UMETA multi colour cardboard box 1,385 g (48.8 oz.) + packaging 425 x 185 x 80 mm (16.7 x 7.3 x 3.15") Ref. No.: 7437505 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com email: sales@mdmetric.com ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 RFQ form: http://mdmetric.com/rfq.htm p u s h -t y p e a n d s c r e w-t y p e grease guns PUsH -T yPE And sCrEW-T yPE grE AsE gUns The UMETA programme offers the optimal solution for all lubricating needs. Either with shock-resistant polyamide bodies, or made of high quality zinc-plated steel, with or without telescopic tube: you will find the right push-type grease guns for all sizes and requirements. Push-type grease guns stand out for their handiness and easy operability. Light pressure suffices to allow for the effective lubrication of hydraulic nipples, ball-type and flush-type nipples. The UMETA telescopic push-type grease guns are equipped with a telescopic tube and are therefore suitable for harder to reach applications. With our nozzles, you will find the optimal connection to any lubricating nipple according to DIN. UMETA push-type grease guns are equipped with special nozzles M 9 x 1. Just choose the desired push-type grease gun with the suitable nozzle for your lubricating nipple type from the list! 500 500/s 500/h 500/Ns 500/K Model 30 – 34 Push-Type grease gun made of shock-resistant polyamide · form B according to DIN 1282 · suitable for hydraulic, ball-type, and flush-type nipples barrel version suitable for connection thread packaging shock-resistant polyamide gun body grease up to NLgI2 M9x1 bulk filling capacity operating pressure (approx.) output per stroke total length tube measurements (Ø x L) weight Type 30 30/s 30/h 30/Ns 30/K Connection M 9 x 1 hollow-type nozzle 500 pointed nozzle 500/s hydraulic nozzle 500/h pin pointed nozzle 500/Ns combi nozzle 500/K Ref. No.: 7130433 7130133 7130233 7130533 7133933 Type 34 34/s 34/h 34/Ns 34/K Type 30 60 ccm (2.0 oz.) 80 – 120 bar 0.6 ccm (0.02 oz.) 165 mm (6 1/2“) 30 x 105 mm (1.18“ x 4.13“) 62 g (2.2 oz.) Connection M 9 x 1 hollow-type nozzle 500 pointed nozzle 500/s hydraulic nozzle 500/h pin pointed nozzle 500/Ns combi nozzle 500/K Type 34 150 ccm (4.8 oz.) 80 – 120 bar 0,6 ccm (0.02 oz.) 200 mm (7 7/8“) 42 x 140 mm (1.66“ x 5.5“) 100 g (3.5 oz.) Ref. No.: 7134433 7134133 7134233 7134533 7135933 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com email: sales@mdmetric.com ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 RFQ form: http://mdmetric.com/rfq.htm 15 Model 36 Push-Type grease gun made of zinc-plated steel · form B according to DIN 1282 · suitable for hydraulic, ball-type, and flush-type nipples barrel version suitable for filling capacity connection thread opperating pressure Type 36 36/s 36/h output tube measurements barrel length packaging weight zinc-plated body grease up to NLgI2 300 ccm (10.0 oz.) bulk grease M9x1 approx. 120 – 200 bar / 1,740 – 2,900 PsI Connection M 9 x 1 hollow-type nozzle 500 pointed nozzle 500/s hydraulic nozzle 500/h Ref. No.: 7136413 7136113 7136213 Model 40 – 44 Type 36/Ns 36/K 0.7 ccm (0.02 oz.)/stroke Ø 50 mm x L 155 mm (Ø 1.97" x L 6.1") 240 mm (9 ½") bulk 300 g (10.5 oz.) Connection M 9 x 1 pin pointed nozzle 500/Ns combi nozzle 500/K Ref. No.: 7136313 7136513 Telescopic Push-Type grease gun made of polyamide · form A according to DIN 1282 · with telescopic tube · suitable for hydraulic, ball-type, and flush-type nipples barrel version suitable for connection thread packaging filling capacity bulk grease operating pressure (approx.) output per stroke shock-resistant polyamide gun body grease up to NLgI2 M9x1 bulk total length tube measurements (Ø x L) weight 16 Type 40 40/s 40/h 40/Ns 40/K Connection M 9 x 1 hollow-type nozzle 500 pointed nozzle 500/s hydraulic nozzle 500/h pin pointed nozzle 500/Ns combi nozzle 500/K Ref. No.: 7140433 7140133 7140233 7140333 7140533 Type 42 42/s 42/h 42/Ns 42/K Connection M 9 x 1 hollow-type nozzle 500 pointed nozzle 500/s hydraulic nozzle 500/h pin pointed nozzle 500/Ns combi nozzle 500/K Ref. No.: 7142433 7142133 7142233 7142533 7142733 Type 44 44/s 44/h 44/Ns 44/K Type 40 70 ccm (2.4 oz.) 140 bar / 2,030 PsI 0.8 – 1.2 ccm (0.03 – 0.04 oz.) 240 mm (9 1/2“) 36 x 100 mm (0.42“ x 3.94“) 100 g (3.5 oz.) Connection M 9 x 1 hollow-type nozzle 500 pointed nozzle 500/s hydraulic nozzle 500/h pin pointed nozzle 500/Ns combi nozzle 500/K Type 42 110 ccm (3.5 oz.) 180 bar / 2,610 PsI 0.8 – 1.2 ccm (0.03 – 0.04 oz.) 270 mm (10 1/2“) 41 x 110 mm (1.62“ x 4.33“) 120 g (4.25 oz.) Type 44 180 ccm (5.8 oz.) 200 bar / 2,900 PsI 0.8 – 1.2 ccm (0.03 – 0.04 oz.) 335 mm (13 1/2“) 45 x 135 mm (1.78“ x 5.31“) 150 g (5.3 oz.) Ref. No.: 7144433 7144133 7144233 7144533 7144753 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com email: sales@mdmetric.com ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 RFQ form: http://mdmetric.com/rfq.htm p u s h -t y p e a n d s c r e w-t y p e grease guns Model 46 Telescopic Push-Type grease gun made of zinc-plated steel · form A according to DIN 1282 · with telescopic tube · suitable for hydraulic, ball-type, and flush type nipples barrel version suitable for filling capacity connection thread operating pressure Type 46 46/s 46/h output tube measurements total length packaging weight zinc-plated body grease up to NLgI2 335 ccm (10.7 oz.) bulk grease M9x1 approx. 200 bar / 2,900 PsI Connection M 9 x 1 hollow-type nozzle 500 pointed nozzle 500/s hydraulic nozzle 500/h Ref. No.: 7146413 7146113 7146213 Model 21 Type 46/Ns 46/K approx. 1.2 ccm (0.04 oz.)/stroke Ø 45 mm x L 250 mm (Ø 1.8" x L 9.8") 565 mm (22 ¼") bulk 600 g (21 oz.) Connection M 9 x 1 pin pointed nozzle 500/Ns combi nozzle 500/K Ref. No.: 7146313 7146753 screw-Type grease gun made of zinc-plated steel · metering gun for greases barrel version suitable for filling capacity connection thread operating pressure Connection M 10 x 1 output tube measurements total length packaging weight zinc-plated body grease up to NLgI2 150 ccm (4.8 oz.) M 10 x 1 or R 1/8 approx. 8 – 20 bar / 116 – 290 PsI Scope of delivery without accessories Ref. No.: 7611113 Connection R 1/8 approx. 1.8 ccm (0.06 oz.)/turn Ø 40 mm x L 130 mm (Ø 1.6" x L 5.1") 180 mm (7") bulk 365 g (12.9 oz.) Scope of delivery without accessories Ref. No.: 7611213 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com email: sales@mdmetric.com ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 RFQ form: http://mdmetric.com/rfq.htm 17 OIL gUns UMETA oil guns are specially designed for operation with oils and high-viscosity grease, and they are manufactured with the same high quality as the well-established UMETA grease guns. sealing elements and accessory parts specially desgined for this purpose allow for optimal leakproof oil fittings. 70/PKO Hand Lever Oil guns with shock-resistant polyamide barrel · for 500 ccm (16.0 oz.) oil barrel version shock-resistant polyamide barrel Ø 60 mm (2 1/3") 292 mm (11 ½") oils and high-viscosity grease 500 ccm (16.0 oz.) bulk grease and oil M 10 x 1 or g 1/8 upon request 1/8 NPT 400 bar / 5,800 PsI barrel length suitable for filling capacity connection thread operating pressure Connection M 10 x 1 M 10 x 1 Packed in polybag polybag M 10 x 1 M 10 x 1 M 10 x 1 polybag cardboard box cardboard box M 10 x 1 cardboard box Scope of delivery without accessories with 340/gLN, incl. oil hydraulic coupling with 110/gO without accessories with 340/gLN, incl. oil hydraulic coupling with 110/gO output testing pressure packed in weight Ref. No.: v001549 v001502 Connection R 1/8 R 1/8 Packed in polybag polybag v001550 v001554 v001555 R 1/8 R 1/8 R 1/8 polybag cardboard box cardboard box v001557 R 1/8 cardboard box 43/s and 43/H Ref. No.: v001551 v001553 v001552 v001558 v001559 v001560 · form A according to DIN 1282 · suitable for oils and high-viscosity grease · comes with pointed nozzle or hydraulic nozzle The UMETA telescopic push-type oil guns are equipped with a telescopic tube and are therefore suitable for a precise lubrication. Light pressure suffices to allow for the effective lubrication of hydraulic nipples, ball-type and flush-type nipples. 43/H barrel version tube measurements (Ø x L) total length suitable for filling capacity connection thread 18 Scope of delivery without accessories with 340/gLN, incl. oil hydraulic coupling with 110/gO without accessories with 340/gLN, incl. oil hydraulic coupling with 110/gO Telescopic Push Type Oil guns 43/s Type 43/s approx. 1.9 ccm (0.06 oz.)/stroke 800 bar / 11,600 PsI printed UMETA polybag or printed UMETA cardboard box 1,075 g (37.9 oz.) + accessories and packaging operating pressure output packaging weight shock-resistant polyamide barrel 41 x 110 mm (1 5/8" x 4 1/3") 270 mm (10 5/8") oils and high-viscosity grease 110 ccm (3.5 oz.) M9x1 Scope of delivery pointed nozzle 500/s Ref. No.: 7143133 Type 43/h 180 bar (2,610 PsI) 0.6 ccm (0.02 oz.)/stroke bulk 120 g (4.2 oz.) + accessories and packaging Scope of delivery hydraulic nozzle 500/h Ref. No.: 7143233 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com email: sales@mdmetric.com ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 RFQ form: http://mdmetric.com/rfq.htm ac c e s s o r i e s f o r g r e a s e g u n s accessories for grease guns UMETA original accessories for grease guns offer a wide range of application possibilities. Therefore, you will be able to solve any lubricating needs with our accessories. If not, we as an experienced manufacturer, will find a solution together with you. Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com email: sales@mdmetric.com ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 RFQ form: http://mdmetric.com/rfq.htm 19 nozzle tubes UMETA nozzle tubes in a straight or bent version allow for most simple, tool-free assembly by a polyamide butterfly nut, which guarantees an optimal sealing effect and which makes it possible to stabilize the bent nozzle in any desired position. nozzle tubes with connection G 1/8 are marked by a blue butterfly nut nozzle tubes with connection thread 1/8-NPT upon request 110/g 100/g 110/s 100/s 110/H 100/H · nozzle tube, bent · with hydraulic coupler · length 170 mm Type 110/G 110/G Connection M 10 x 1 G 1/8 Ref. No.: V000279 V000337 · nozzle tube, straight · with hydraulic coupler · length 170 mm Type 100/G 100/G Connection M 10 x 1 G 1/8 Ref. No.: V000044 V000155 · nozzle tube, bent · with pointed nozzle · length 154 mm Type 110/S 110/S Connection M 10 x 1 G 1/8 Ref. No.: V000316 V000285 · nozzle tube, straight · with pointed nozzle · length 154 mm Type 100/S 100/S Connection M 10 x 1 G 1/8 Ref. No.: V000247 V000253 · nozzle tube, bent · with hydraulic nozzle · length 150 mm Type 110/H 110/H Connection M 10 x 1 G 1/8 Ref. No.: V000103 V000375 · nozzle tube, straight · with hydraulic nozzle · length 150 mm Type 100/H 100/H Connection M 10 x 1 G 1/8 Ref. No.: V000076 V000055 · nozzle tube, bent · with hydraulic coupler · without butterfly nut · length 170 mm (6 ½") Type 95/G 95/G 95/G Connection M 10 x 1 G 1/8 1/8 NPT Ref. No.: V000398 V000154 V000101 · nozzle tube, straight · with hydraulic coupler · without butterfly nut · length 170 mm (6 ½") Type 90/G 90/G 90/G Connection M 10 x 1 G 1/8 1/8 NPT Ref. No.: V000074 V000054 V000072 95/g 90/g 20 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com email: sales@mdmetric.com ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 RFQ form: http://mdmetric.com/rfq.htm ac c e s s o r i e s f o r g r e a s e g u n s nozzles and Hydr aulic couPlers Hollow-type nozzle · suitable for ball-type and hydraulic-type nipples acc. to DIN 71412 outer Ø height 12 mm 8.5 mm Type 500 501 502 Connection M9x1 M 10 x 1 G 1/8 Ref. No.: 7351461 V000100 V000227 Pointed nozzle · suitable for flush-type nipples acc. to DIN 3405 outer Ø height 12 mm 18 mm Type 500/S 501/S 502/S Connection M9x1 M 10 x 1 G 1/8 Ref. No.: 7351161 V000248 V000254 Pin pointed nozzle · suitable for flush-type nipples acc. to DIN 3405 height spanner size 16 mm 11 Type 500/NS 501/NS 502/NS Connection M9x1 M 10 x 1 G 1/8 Ref. No.: 7351561 V000246 V000252 Hydraulic nozzle · suitable for ball-type and hydraulic-type nipples acc. to DIN 71412 outer Ø height 12 mm 15 mm Type 500/H 501/H 502/H Connection M9x1 M 10 x 1 G 1/8 Ref. No.: 7351261 V000104 V000250 combo-nozzle hollow/pointed · suitable for two different applications by just unscrewing/ screwing the desired nozzle outer Ø height spanner size 12 mm 28 mm 11 Type 500/K 501/K 502/K Connection M9x1 M 10 x 1 G 1/8 Ref. No.: 7351061 7351031 7351041 Hydraulic coupler · standard with 4 punched jaws · suitable for hydraulictype nipples acc. to DIN 71412 outer Ø height spanner size 15 mm 36 mm 13 Type 515/G 515/G 515/G 515/G Connection M9x1 M 10 x 1 G 1/8 1/8 NPT Ref. No.: 7353361 V000077 V000106 V000102 angled hydraulic coupler · standard with 4 punched jaws · suitable for hydraulic-type nipples acc. to DIN 71412 outer Ø height width spanner size 15 mm 36 mm 27 mm 14 Type 515/G-S 515/G-S 515/G-S Connection M 10 x 1 G 1/8 1/8 NPT Ref. No.: 7351314 7351315 7351317 Hydraulic coupler, heavy-duty hexagon · standard with 4 punched jaws · suitable for hydraulic-type nipples acc. to DIN 71412 · with ball valve outer Ø height spanner size 15 mm 48 mm 17 Type 512/G 512/G 512/G Connection M 10 x 1 G 1/8 1/8 NPT Ref. No.: 7351316 7351326 7351376 bayonet coupler · suitable for bayonet nipples outer Ø height spanner size 16.5 mm 37 mm 17 Type 517/B 517/B 517/B Connection M 10 x 1 G 1/8 1/8 NPT Ref. No.: 9140215 9140216 9140217 also available with turned jaws upon request Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com email: sales@mdmetric.com ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 RFQ form: http://mdmetric.com/rfq.htm 21 button-head coupler The UMETA slide coupler is equipped with the hose connection either at the top, or at the side – and it is made of aluminium or steel for optimal handling – according to each application. You achieve additional flexibility by using a swivel joint. · according to DIN 1283 sidewise connection Type 520 521 522 520 521 522 520 521 522 Connection M 10 x 1 M 10 x 1 M 10 x 1 G 1/8 G 1/8 G 1/8 1/8 NPT 1/8 NPT 1/8 NPT Dimensions outer Ø height width M4 18.0 mm 28.5 mm 31.0 mm Sidewise M 4, Ø 10 mm M 1 + T 1, Ø 16 mm M 22, Ø 22 mm M 4, Ø 10 mm M 1 + T 1, Ø 16 mm M 22, Ø 22 mm M 4, Ø 10 mm M 1 + T 1, Ø 16 mm M 22, Ø 22 mm M1+T1 24.0 mm 28.0 mm 36.0 mm Aluminium — V000097 V000095 — V000331 V000098 — V000325 V000666 M 22 32.0 mm 38.5 mm 42.0 mm Steel V000088 V000084 V000096 V000085 V000224 V000321 V001625 V001425 V001426 top connection Type 520 521 522 520 521 522 Dimensions outer Ø height Connection M 10 x 1 M 10 x 1 M 10 x 1 G 1/8 G 1/8 G 1/8 M1+T1 24.0 mm 28.0 mm Top M 4, Ø 10 mm M 1 + T 1, Ø 16 mm M 22, Ø 22 mm M 4, Ø 10 mm M 1 + T 1, Ø 16 mm M 22, Ø 22 mm M 22 32.0 mm 38.5 mm Aluminium — — — — — 7368011 Steel — 7368015 — — — 7368012 Sealing kits for slide coupler, consisting of sealing, spring, and metal ring, are available in different versions and sizes. Further special versions upon request, e. g. those for using resins. Button-head coupler with connection possibility on both sides upon request. swivel joint For a flexible assembly between hose and coupler, we recommend using a UMETA swivel joint. With a UMETA swivel joint, the coupler can be turned to any desired position without having to hold the grease gun in an inappropriate position. length weight outer Ø spanner size 30 mm 11 g 14 mm 14 Type 140/G20 140/G20 140/G20 140/G20 Connection M 10 x 1 G 1/8 G 1/4 1/8 NPT Ref. No.: 7331911 7331921 7331941 7331925 Type 515/GO 515/GO 515/GO Connection M 10 x 1 G 1/8 1/8 NPT Ref. No.: V000330 V000361 V000239 Type 512/G 512/G 512/G Connection M 10 x 1 G 1/8 1/8 NPT Ref. No.: 7351316 7351326 7351376 oil- Proof Hydr aulic couPler Hydraulic coupler Hydraulic coupler, heavy-duty hexagon 22 · with ball valve – therefore, absolutely oil-proof · suitable for hydraulictype nipples acc. to DIN 71412 · standard with 4 punched jaws · with ball valve – therefore, absolutely oil-proof · suitable for hydraulictype nipples acc. to DIN 71412 · standard with 4 punched jaws outer Ø height spanner size outer Ø height spanner size 15 mm 36 mm 13 15 mm 48 mm 17 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com email: sales@mdmetric.com ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 RFQ form: http://mdmetric.com/rfq.htm ac c e s s o r i e s f o r g r e a s e g u n s HigH Pressure Hoses With UMETA‘s hoses, you establish an optimal connection between your grease gun and the lubricating spot. Available in two versions and lengths, either without nozzle, or already assembled with the UMETA nozzle of your choice. Please be aware of smallest allowable bending radius. 360/ln High pressure hose Ø 11 mm (0.43") attention: neVer fold! · DIN 1283 inner Ø outer Ø burst pressure testing pressure operating pressure max. Type 360/LN 340/GLN 330/LN 350/LN 354/LN 360/LN 340/GLN 330/LN 350/LN 354/LN 360/LN 340/GLN 330/LN 350/LN 354/LN Connection M 10 x 1 M 10 x 1 M 10 x 1 M 10 x 1 M 10 x 1 G 1/8 G 1/8 G 1/8 G 1/8 G 1/8 1/8" NPT 1/8" NPT 1/8" NPT 1/8" NPT 1/8" NPT temperature range allowed bending radius max. inner layer reinforcement outer layer 4.0 mm (0.16") 10.2 mm (0.4") 1,000 bar / 14,500 PSI 800 bar / 11,600 PSI 400 bar / 5,800 PSI Connector without nozzle hydraulic coupler H button head coupler M 4 button head coupler M 1 + T 1 button head coupler M 22 without nozzle hydraulic coupler H button head coupler M 4 button head coupler M 1 + T 1 button head coupler M 22 without nozzle hydraulic coupler H button head coupler M 4 button head coupler M 1 + T 1 button head coupler M 22 Length 300 mm (12") 300 mm (12") 300 mm (12") 300 mm (12") 300 mm (12") 300 mm (12") 300 mm (12") 300 mm (12") 300 mm (12") 300 mm (12") 300 mm (12") 300 mm (12") 300 mm (12") 300 mm (12") 300 mm (12") Ref. No.: V000145 V000039 V000366 V000283 V000318 V000130 V000108 V001048 V000223 V000650 V000109 V000326 V001662 V000682 V000683 360/l Type 362/LN 342/GLN 332/LN 352/LN 356/LN 362/LN 342/GLN 332/LN 352/LN 356/LN 362/LN 342/GLN 332/LN 352/LN 356/LN Connection M 10 x 1 M 10 x 1 M 10 x 1 M 10 x 1 M 10 x 1 G 1/8 G 1/8 G 1/8 G 1/8 G 1/8 1/8" NPT 1/8" NPT 1/8" NPT 1/8" NPT 1/8" NPT -20°C – +60°C (-4 °F - +140 °F) 35 mm (1.37") polyethylene 1 polyester insert polyamide Connector without nozzle hydraulic coupler H button head coupler M 4 button head coupler M 1 + T 1 button head coupler M 22 without nozzle hydraulic coupler H button head coupler M 4 button head coupler M 1 + T 1 button head coupler M 22 without nozzle hydraulic coupler H button head coupler M4 button head coupler M 1 + T 1 button head coupler M 22 Length 500 mm (20") 500 mm (20") 500 mm (20") 500 mm (20") 500 mm (20") 500 mm (20") 500 mm (20") 500 mm (20") 500 mm (20") 500 mm (20") 500 mm (20") 500 mm (20") 500 mm (20") 500 mm (20") 500 mm (20") Ref. No.: V000312 V000041 V000940 V000298 V000394 V000323 V000288 V001049 V000651 V000652 V000328 V000327 V001663 V000684 V000685 high pressure hose 2 sn Ø 13 mm (½") · DIN 1283 inner Ø outer Ø burst pressure testing pressure operating pressure max. Type 360/L 340/GL 330/L 350/L 354/L 360/L 340/GL 330/L 350/L 354/L 360/L 340/GL 330/L 350/L 354/L Connection M 10 x 1 M 10 x 1 M 10 x 1 M 10 x 1 M 10 x 1 G 1/8 G 1/8 G 1/8 G 1/8 G 1/8 1/8" NPT 1/8" NPT 1/8" NPT 1/8" NPT 1/8" NPT temperature range: allowed bending radius max.: inner layer reinforcement outer layer 4.8 mm (0.19") 12.5 mm (0.5") 1,650 bar / 23,925 PSI 800 bar / 11,600 PSI 415 bar / 6,000 PSI Connector without nozzle hydraulic coupler H slide coupler M 4 slide coupler M 1 + T 1 slide coupler M 22 without nozzle hydraulic coupler H slide coupler M 4 slide coupler M 1 + T 1 slide coupler M 22 without nozzle hydraulic coupler H slide coupler M 4 slide coupler M 1 + T 1 slide coupler M 22 Length 300 mm (12") 300 mm (12") 300 mm (12") 300 mm (12") 300 mm (12") 300 mm (12") 300 mm (12") 300 mm (12") 300 mm (12") 300 mm (12") 300 mm (12") 300 mm (12") 300 mm (12") 300 mm (12") 300 mm (12") Ref. No.: V000282 V000200 V001206 V000311 V000653 V000410 V000042 V001208 V000741 V000761 V000521 V000686 V001672 V000687 V000688 Type 362/L 342/GL 332/L 352/L 356/L 362/L 342/GL 332/L 352/L 356/L 362/L 342/GL 332/L 352/L 356/L Connection M 10 x 1 M 10 x 1 M 10 x 1 M 10 x 1 M 10 x 1 G 1/8 G 1/8 G 1/8 G 1/8 G 1/8 1/8" NPT 1/8" NPT 1/8" NPT 1/8" NPT 1/8" NPT -40°C – +100°C (-40 °F - +212 °F) 90 mm (3.5") polyethylene double steel wire braid synth. rubber Connector without nozzle hydraulic coupler H slide coupler M 4 slide coupler M 1 + T 1 slide coupler M 22 without nozzle hydraulic coupler H slide coupler M 4 slide coupler M 1 + T 1 slide coupler M 22 without nozzle hydraulic coupler H slide coupler M 4 slide coupler M 1 + T 1 slide coupler M 22 Length 500 mm (20") 500 mm (20") 500 mm (20") 500 mm (20") 500 mm (20") 500 mm (20") 500 mm (20") 500 mm (20") 500 mm (20") 500 mm (20") 500 mm (20") 500 mm (20") 500 mm (20") 500 mm (20") 500 mm (20") Ref. No.: V000297 V000294 V001207 V000475 V000332 V000471 V000496 V001209 V001210 V001020 V000465 V000689 V001673 V000490 V000691 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com email: sales@mdmetric.com ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 RFQ form: http://mdmetric.com/rfq.htm 23 QuicK-adaP ters - for high pressure hoses and nozzle tubes with hydraulic coupler Quick-adapter, short · allows for the flexible combination with various UMETA accessory parts length weight outer Ø 32 mm 45 g 20 mm Connection M8x1 M 10 x 1 R 1/8 Ref. No.: 9907126 9907127 9907128 200/M 1 · for button-head nipples M 1 (Ø 16) acc. to DIN 3404 · button-head coupler made of aluminium length height weight outer Ø 105 mm 28 mm 110 g 24 mm Type 200/M 1 Ref. No.: 7321651 200/M 4 · for button-head nipples M 4 (Ø 10) acc. to DIN 3404 · button-head coupler made of steel length height weight outer Ø 107 mm 28.5 mm 100 g 18 mm Type 200/M 4 Ref. No.: 7321851 200/M 22 · for button-head nipples M 22 (Ø 22) acc. to DIN 3404 · button-head coupler made of aluminium length height weight outer Ø 114 mm 38.5 mm 160 g 32 mm Type 200/M 22 Ref. No.: 7321751 200/K · for cardan shafts, with hollow nozzle length weight 133 mm 80 g Type 200/K Ref. No.: 7322451 200/s · for flush-type nipples acc. to DIN 3405 length weight 92 mm 65 g Type 200/S Ref. No.: 7321151 200/Xs · hard to reach areas, for cardan shafts and smallest nipples of any kind length weight 95 mm 60 g Type 200/XS Ref. No.: 7321551 Quick-adapters in a handy carrying case 24 pin point tube outer Ø 4 mm inner Ø 0.8 mm length 55 mm consisting of: each 1 x 200/M 1 200/M 4 200/M 22 200/K 200/S 200/XS swivel joint Ref. No.: 9230004 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com email: sales@mdmetric.com ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 RFQ form: http://mdmetric.com/rfq.htm ac c e s s o r i e s f o r g r e a s e g u n s Wall br acKets - Wall bracket for UMETA TWIN-LOCK® Grease Guns open version closed version clamping collar wall hook With the robust wall bracket made of zinc plated steel you obtain a steady-state greasing station for your UMETA grease gun. After having mounted the bracket to the wall, the grease gun will be fixed with the clamping collar. Now, the grease nipple has to be connected with hose and nozzle and can be lubricated very comfortable directly from the wall station. For changing the grease cartridge the gun tube can be removed while the grease gun remains in the bracket. Type Wall bracket (open version), cpl. set Wall bracket (closed version), cpl. set Wall hook gre ase c artridges Ref. No.: 7092100 7092110 6900099 super lithium multipurpose grease uMeta grease cartridges according to din 1284 · cartridge according to DIN 1284 · suitable for lubricating normally strained bearings · suitable for all grease guns according to DIN 1283 · universally applicable filling quantity thaw point NLGI class packing unit Packing unit 24 pcs. application temperature upon permanent operation 400 g (14.0 oz.) 180 °C/356 °F 2 24 pcs. temporarily -30 °C/ -22 °F up to +120 °C/ 248 °F up to +130 °C/266 °F Ref. No.: 7371953 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com email: sales@mdmetric.com ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 RFQ form: http://mdmetric.com/rfq.htm 25 GaraGe equipment Get the practical devices for daily works in the garage from UMETA as well! We offer you the complete programme of handling systems, such as suction and filling devices, or fully equipped grease gun carrying cases, e. g. 26 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com email: sales@mdmetric.com ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 RFQ form: http://mdmetric.com/rfq.htm Ga r aG e eq u i pm en t Suc tion GunS Suction Guns are practical and reliable devices for suction and delivery of oils and highviscosity grease. They stand out by their ergonomic handle, robust design, and they are easy to operate. For an optimal sealing effect, they are always equipped with a double sleeve. Here, too, we carry a complete accessories programme, e. g. connection nozzle tubes and flexible hoses. type 2 Suction Gun · for a 250 ccm content barrel version barrel length suitable filling capacity connection thread packed in made of zinc-plated steel Ø 42 mm (1.65“) 260 mm (10.2“) for oil and high-viscosity grease 250 ccm (8.75 oz.) M 10 x 1 Connection M 10 x 1 weight dimensions polybag or bulk 440 g (15.5 oz.) + accessories and packaging 42 x 290 mm (1.65“ x 11.4“) Ref. No.: 7222143 type 3 Suction Gun · for a 500 ccm content barrel version barrel length suitable filling capacity connection thread Connection M 10 x 1 packed in zinc-plated steel, yellow passivated Ø 50 mm (2.0“) 295 mm (11.6“) for oil and high-viscosity grease 500 ccm (17.5 oz.) M 10 x 1 weight dimensions polybag or bulk 560 g (19.8 oz.) + accessories and packaging 56 x 350 mm (2.2“ x 13.8“) Ref. No.: 7233113 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com email: sales@mdmetric.com ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 RFQ form: http://mdmetric.com/rfq.htm 27 type 4 Suction Gun · for a 1,000 ccm content barrel version barrel length suitable filling capacity connection thread packed in zinc-plated steel, yellow passivated Ø 56 mm (2.2“) 446 mm (17.6“) for oil and high-viscosity grease 1,000 ccm (35.0 oz.) M 13 x 1 Connection M 13 x 1 weight dimensions polybag or bulk 1,065 g (37.6 oz.) + accessories and packaging 61 x 530 mm (2.4“ x 20.9“) Ref. No.: 7244313 Suction Gun with reversing valve type 2/V · for a 250 ccm content The reversing valve of type 2/V allows for most simple transfer of liquids from one container to another. barrel version barrel length suitable filling capacity packed in made of zinc-plated steel Ø 42 mm (1.65“) 270 mm (10.6“) for oil and high-viscosity grease 250 ccm (8.75 oz.) weight dimensions polybag or bulk 580 g (20.5 oz.) + packaging 42 x 360 mm (1.65“ x 14.2“) Ref. No.: 7212443 Filling cylinder for central lubrication systems · for fast filling of central lubrication systems with grease and high-viscosity grease · suitable for bulk grease and for grease cartridges of 400 g barrel version barrel length suitable filling capacity made of zinc-plated steel Ø 56 mm (2.2“) 370 mm (14.6“) for grease and high-viscosity grease 400 g (14.0 oz.) grease cartridge / 500 ccm (17.5 oz.) bulk grease packed in weight dimensions polybag or bulk 960 g (33.9 oz.) + packaging 64 x 460 mm (2.5“ x 18.1“) Ref. No.: 5556010 28 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com email: sales@mdmetric.com ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 RFQ form: http://mdmetric.com/rfq.htm Ga r aG e eq u i pm en t acceSSorieS For Suc tion GunS UMETA's high quality suction gun accessories let you handle any job easily! SDF transparent, flexible hose SDF 10 · for decanting fluid contents SDF 13 Type SDF 10 Connection M 10 x 1 Total length 300 mm (11.8“) Ref. No.: 7277113 Type SDF 13 SDK nozzle tube SDK 10 · bent Connection M 13 x 1 Total length 300 mm (11.8“) Ref. No.: 7277313 Connection M 13 x 1 Total length 250 mm (9.8“) Ref. No.: 7266313 Connection M 13 x 1 Total length 250 mm (9.8“) Ref. No.: 7256313 SDK 13 Type SDK 10 Connection M 10 x 1 Total length 190 mm (7.5“) Ref. No.: 7265113 Type SDK 13 nozzle tube SDG · straight SDG 10 SDG 13 Type SDG 10 Connection M 10 x 1 Total length 190 mm (7.5“) Ref. No.: 7255113 Type SDG 13 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com email: sales@mdmetric.com ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 RFQ form: http://mdmetric.com/rfq.htm 29 other Gar aGe equipment umeta tWin-LocK® ultra case Kit The complete lubricating equipment in a handy carrying case, which contains everything you need for any application, especially our umeta tWin-LocK® ultra Grease Gun 75/pKu according to Din 1283. The carrying case kit comes with the practical UMETA hose parking unit. The grease gun can be hung up by the provided wall bracket, and is thus always at hand. umeta tWin-LocK® ultra Grease Gun 75/pKu top model, which combines quality, function and design. · for 400 g (14.0 oz.) grease cartridge / 500 ccm (17.5 oz.) bulk grease · ergonomic grips made of anti-slip material · filler valve, DIN 1283 included · with TWIN-LOCK system and patented EVER-Flow system accessories kit, consisting of: · high pressure hose 340/GLN · nozzle tube 110/G · hydraulic coupler 515/G-4 · quick-adapter, as short version 200/M 4, 200/M 1, 200/M 22, 200/S, 200/XS · grease nipple assortment 60s, each 5 pcs. H1/H2/H3 6 x 1, 8 x 1, 10 x 1, R 1/8 · grease cartridge 400 g · hose parking unit at hand lever · wall bracket Connection M 10 x 1 G 1/8 Packaging carrying case carrying case Scope of delivery complete accessories complete accessories portable Lubrication System carrY-LuBe Ref. No.: 6900096 6900098 · hand- or foot operated high pressure equipment · for 2.5 kg grease bucket (diameter 160 mm) · adjustable for greasing with high volume or high pressure · with high-pressure grease gun up to 690 bar / 10,000 PSI · connected with 1.5 m hose · capable for approx. 30 high pressure shots suitable for length of suction tube output operating pressure Packaging cardboard box 30 Ref. No.: 6900095 case without content grease up to NLGI 2 150 mm (5.9“) max. 1.25 g (0.044 oz.) per shot (approximately 30 shots per loading) max. 690 bar (10,000 PSI) packed in gross weight net weight dimensions (L x W x H) single carton box 4,330 g 4,030 g 200 x 215 x 460 mm Ref. No.: 9626825 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com email: sales@mdmetric.com ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 RFQ form: http://mdmetric.com/rfq.htm Ga r aG e eq u i pm en t umeta Filling Device for Grease Guns All grease guns with a DIN filler valve can be filled from the bucket easily and safely by the inclined filling coupler. With variable screw-on features, the filling devices work with all common bucket sizes. The loose lid protects against dirt and grime and serves for simple control of filling height at the same time. delivery capacity operating pressure Content grease bucket 5 kg 10 kg 15 kg 20 kg 25 kg 50 kg 30 ccm (1.1 oz.)/stroke 8 bar / 1.2 PSI Grease Bucket Ø 180 – 210 mm 210 – 240 mm 240 – 270 mm 270 – 310 mm 310 – 335 mm 335 – 385 mm packed in weight Bucket height max. in mm (inches) 510 (20“) 510 (20“) 510 (20“) 510 (20“) 680 (26.8“) 680 (26.8“) Weight in kgs 3.8 3.9 4.3 4.8 5.4 6.5 cardboard box in kgs, incl. packaging Dimensions (L x W x H) in mm 670 x 420 x 100 670 x 420 x 100 670 x 420 x 100 670 x 420 x 100 670 x 420 x 100 800 x 420 x 100 Ref. No.: 7591783 7591883 7591483 7591983 7591583 7591683 umeta handlever oil Barrel pump (steel tube) · with telescopic tube and steel discharge elbow · for 60/200/220 ltr. drums · suitable for motor, hydraulic, and gear oil, diesel, petroleum, heating oil, waste oil suitable for tube type length/dip depth tube Ø drum thread delivery capacity motor, hydraulic, and gear oils up to SAE 50 made of zinc-plated steel 440 – 860 mm (17.3“ - 33.9“) 25 – 35 mm (1.0“ x 1.4“) 2" 16 ltr. (541 oz.)/min. 300 ccm (10.1 oz.)/stroke total height total width net weight packed in gross weight dimensions (L x W x H) 1,250 mm (49.2“) 520 mm (20.5“) 1,800 g (63.5 oz.) cardboard box 1,900 g (67 oz.) 460 x 140 x 70 mm (18.1 x 5.5 x 2.75“) Packaging cardboard box Ref. No.: 9626830 umeta rotary oil Barrel pump · with steel tube and steel discharge elbow · for 60/200/220 ltr. drums · comes with: 1 m PVC hose with fold protection spring, 2 hose clamps tube type length/dip depth tube Ø drum thread delivery capacity total heigth Packaging cardboard box made of zinc-plated steel 980 mm (38.6“) 25 – 35 mm (1.0“ x 1.4“) 2" 35 ltr. (1,183 oz.)/min. 1,250 mm (49.2“) total width net weight packed in weight dimensions (L x W x H) 210 mm (8.3“) 4,800 g (169 oz.) cardboard box 4,900 g (173 oz.) 360 x 160 x 130 mm (14.2 x 6.3 x 5.1“) Ref. No.: 9626820 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com email: sales@mdmetric.com ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 RFQ form: http://mdmetric.com/rfq.htm 31 umeta oil cans * Stand out for the following advantages: · precision double-pumping system made of brass · high pressure performance · large filling hole · red stove enamelling · easy to disassemble, therefore, easy to clean · enormously stable due to large bottom · packed: 12 pcs. per size in cardboard box Type K 200 flex K 300 flex K 500 flex Nominal content 200 ml 300 ml 500 ml Connection flexible hose flexible hose flexible hose Net weight 195 g 215 g 235 g Ref. No.: 7522224 7523224 7525224 oil measuring cans * · made of especially stable red/ecru polyamide · available in different sizes Please note our packing units! Size 0.5 ltr. 1.0 ltr. 2.0 ltr. 5.0 ltr. Packing unit 15 pcs. 15 pcs. 10 pcs. 4 pcs. Ref. No.: 9626700 9626701 9626702 9626705 The flexible spout is available for all different can sizes and facilitates filling without additional funnel use. Size 0.5, 1.0 + 2.0 ltr. Packing unit loose packaging Ref. No.: 9626706 measuring cups * · made of transparent polyamide · available in different sizes · embossed labelling Please note our packing units! Size 0.25 ltr. 0.5 ltr. 1.0 ltr. 2.0 ltr. 3.0 ltr. 5.0 ltr. Packing unit 25 pcs. 16 pcs. 12 pcs. 12 pcs. 10 pcs. 5 pcs. Ref. No.: 9626725 9626800 9626801 9626802 9626803 9626805 * We reserve to modify colour and form. 32 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com email: sales@mdmetric.com ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 RFQ form: http://mdmetric.com/rfq.htm Ga r aG e eq u i pm en t Funnels * Funnels made of especially stable red polyamide, available in different sizes and kits. The funnels are available both with and without filter screen, partially equipped with flexible plastics or brass hose, or a bent plastics tube, respectively. Please note our packing units! Type kit of 4 one size one size Size (in mm) Ø 60/80/100/120 Ø 100 Ø 140 Packing unit 6 pcs. 12 pcs. 12 pcs. Ref. No.: 9626103 9626109 9626140 Type Size (in mm) with filter and flex hose, polyamide Ø 210 Packing unit 12 pcs. Ref. No.: 9626396 Other versions upon request. Washing tub, 6.0 ltr. * · made of especially stable red polyamide Packing unit 6 pcs. Ref. No.: 9626810 umeta grease cartridges according to Din 1284 * Super lithium multipurpose grease · cartridge according to DIN 1284 · suitable for lubricating normally strained bearings · suitable for all grease guns according to DIN 1283 · universally applicable filling quantity thaw point NLGI class packing unit Packing unit 24 pcs. application temperature upon permanent operation 400 g/14.0 oz. 180 °C/356 °F 2 24 pcs. temporarily -30 °C/ -22 °F up to +120 °C/ 248 °F up to +130 °C/266 °F Ref. No.: 7371953 * We reserve to modify colour and form. Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com email: sales@mdmetric.com ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 RFQ form: http://mdmetric.com/rfq.htm 33 Injec tIon guns UMETA Hand lever injection guns for sealing and pressing works, specially well for building reconstruction. Viton-sealings allow for cleaning with solvents and for multi-use. The different tube lengths make the filling volume up to 1,100 ccm (35.0 oz.) possible. 75/PKI Zinc Injection gun · for 550 ccm (17.5 oz.) filling material · with rolled, zinc-plated steel cap barrel version barrel length suitable filling capacity connection thread Connection M 10 x 1 34 operating pressure output testing pressure packed in weight made of zinc-plated steel Ø 56 mm (2.2") 295 mm for resin 550 ccm (17.5 Oz.) bulk grease M 10 x 1 or G 1/8 upon request 1/8 NPT Packed in polybag Scope of delivery without accessories dimensions (L x W x H) Ref. No.: 7091156 Connection G 1/8 Packed in polybag 400 bar / 5,800 PSI approx. 1.9 ccm (0.06 oz.)/stroke 800 bar / 11,600 PSI polybag 960 g (33.9 oz.) + accessories and packaging 356 x 125 x 67.5 mm (14.0 x 4.9 x 2.6") Scope of delivery without accessories Ref. No.: 7091157 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com email: sales@mdmetric.com ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 RFQ form: http://mdmetric.com/rfq.htm injection guns 75/PKI Zinc Injection gun · für 550 ccm (17.5 oz.) filling material · with orange polyamide cap barrel version barrel length suitable filling capacity connection thread Connection M 10 x 1 operating pressure output testing pressure packed in weight dimensions (L x W x H) made of zinc-plated steel Ø 56 mm (2.2") 296 mm for resin 550 ccm (17.5 Oz.) bulk grease M 10 x 1 or G 1/8, upon request 1/8 NPT Packed in polybag Scope of delivery without accessories Ref. No.: V000334 75/LLI Zinc Connection G 1/8 Packed in polybag 400 bar / 5,800 PSI approx. 1.9 ccm (0.06 Oz.)/stroke 800 bar / 11,600 PSI polybag 960 g (33.9 oz.) + accessories and packaging 356 x 125 x 67.5 mm (14.0 x 4.9 x 2.6") Scope of delivery without accessories Ref. No.: V001440 Injection gun · long version for 1,100 ccm (35 oz.) filling material · with orange polyamide cap barrel version barrel length suitable filling capacity connection thread Connection M 10 x 1 operating pressure output testing pressure packed in weight dimensions (L x W x H) made of zinc-plated steel Ø 56 mm (2.2") 485 mm for resin 1,100 ccm (35 oz.) bulk material M 10 x 1 or G 1/8, upon request 1/8 NPT Packed in polybag Scope of delivery without accessories Ref. No.: V000340 75/LLI Zinc Connection G 1/8 Packed in polybag 400 bar / 5,800 PSI approx. 1.9 ccm (0.06 Oz.)/stroke 800 bar / 11,600 PSI polybag 1,230 g (43.4 oz.) + accessories and packaging 545 x 125 x 67.5 mm (21.5 x 4.9 x 2.6") Scope of delivery without accessories Ref. No.: V001478 Injection gun · long version for 1,000 ccm (32 oz.) filling material · with zinc-plated steel screw cap barrel version barrel length suitable filling capacity connection thread Connection M 10 x 1 operating pressure output testing pressure packed in weight dimensions (L x W x H) made of zinc-plated steel Ø 56 mm (2.2") 453 mm for resin 1,000 ccm (32 oz.) bulk grease M 10 x 1 or G 1/8, upon request 1/8 NPT Packed in polybag Scope of delivery without accessories Ref. No.: 7091312 Connection G 1/8 Packed in polybag 400 bar / 5,800 PSI approx. 1.9 ccm (0.06 Oz.)/stroke 800 bar / 11,600 PSI polybag 1,260 g (44.4 oz.) + accessories and packaging 513 x 125 x 67.5 mm (20.2 x 4.9 x 2.6") Scope of delivery without accessories Ref. No.: upon request Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com email: sales@mdmetric.com ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 RFQ form: http://mdmetric.com/rfq.htm 35