SPRAYING EQUIPMENT
PRODUCT CATALOGUE
QUALITY • INNOVATION • RELIABILITY
Index
4
20
29
2
AIR ASSIST SPRAYERS
Suntuff series 200/400/500L linkage
5
Compact Supaflo 1000L trailed
6
Supaflo series 2000L trailed
7
Stiletto series 2000L trailed
8
Stiletto Powerhead 2000L trailed
9
G2 Supaflo series 2000L trailed
10
Orchard Sprayer 3000L trailed
11
Supaflo series 3500L trailed
12
Supaflo Powerhead 2000/3500 trailed
13
G2 Supaflo series 4000L trailed
14
Supaflo series 4200L trailed
15
Powerhead conveyor
16
Radak conveyor
17
Conveyors, Deflectors & Wheel Equipment
18
High Pressure pumps
19
TURBOMISER SPRAYERS
P42E/P45E 400L linkage
21
P50E 600L linkage
22
P55DS 600L linkage
23
P50E 600L Two Row linkage
24
P55DS 600L Row crop Airboom linkage
25
P50E 1500/2000L trailed
26
P55DS 2000L trailed
27
Optional Turbomiser heads
28
OVER ROW VINEYARD SPRAYERS
TGS series 2000/3500L trailed
30
TGS series 3000L trailed
31
G2 TGS series 2000/4000L trailed
32
Turbowrap & Tri Wrap 2000/3500L trailed
33
G2 Turbowrap & Tri Wrap 2000/4000L trailed
34
Turbowrap & Tri Wrap 3000L trailed
35
1300 745 826
www.silvan.com.au
Index
LINKAGE SPRAYERS
300/400 Econopak linkage
37
400/600/800L Pasturepak linkage
38
400/600L Super series linkage
39
800/1100L Super series linkage
40
200/300/400L Slimline series linkage
41
800/1000L Slimline series linkage
42
Cane boom 600/800/1100L linkage
43
Casotti sprayer 600/800/1100L linkage
44
Rowmaster 800/1100L linkage
45
BOOMS & ACCESSORIES
Vineyard & Orchard booms
47
Field & Cane booms
48
Devil & Rowmaster booms
49
Silmix, Foam Marker & Hosereels
50
TRAILED AND SLED MOUNT SPRAYERS
Pasture Sprayer 2000L trailed
52
Row King 2500L trailed
53
Turf sprayer 1000/2000L trailed
54
Turf sprayer 400L tray mount
55
Herbicide sprayer 2000L
56
Herbicide sprayer 3 Row 2000L
57
GUIDANCE AND CONTROLLERS
Guidance systems
59
Bravo tree sensor kits
60
Bravo spray rate controllers
61
Electric control kits
62
INFORMATION
Air Assist & Turbomiser Ordering Checklist
Spraying specifications & information
Terms and Conditions
1300 745 826
www.silvan.com.au
63
64-66
67
36
46
51
58
63
3
Air Assist
Sprayers
4
Silvan’s range of Air Assist Sprayers have been
developed to meet the needs of growers for
greater efficiency, safety and spray performance.
1300 745 826
www.silvan.com.au
Linkage Suntuff
Pictured: 400L Suntuff
MODEL SPECIFICATIONS
TANK
PUMP
Silvan oil-backed diaphragm type with nitrile diaphragms
and corrosion resistant, cast anodised aluminium body.
APS71: 71L/min. capacity 4000kPa pressure
APS96: 95L/min. capacity 4000kPa pressure.
Polytuff, impact resistant, polyethylene construction with
litre calibrations, non-spill screw-down lid.
FRAME
Galvanised steel, suit cat I & II linkage
(200L cat 1 linkage only)
AGITATION
200L: bypass. 400L / 500L: dual bypass
FAN SIZE
Axial flow type, fan with curved nylon reinforced blades,
galvanised cowling and protective mesh cover.
600mm with 8 blades on 200L unit
700mm with 8 blades on 400L unit
800mm with 10 blades on 500L unit
PRESSURE
GAUGE
Glycerine filled gauge, located on the control valve.
FILTRATION
Lid strainer, suction line strainer and stainless steel
nozzle filters.
PTO
DRIVESHAFT
Quality driveshaft with quick release pins & safety cover.
HP REQUIRED
200/400L: Minimum 25 PTO HP 500L: Minimum 40 PTO HP
DIMENSIONS
L (mm)
W (mm)
H (mm)
Kg (dry)
DO26-71
1070
1000
1060
90
DO47-71
1330
1190
1200
134
DO58-96
1400
1190
1325
140
NOZZLES
Flip-over type for dilute/concentrate spraying, ceramic
jets, stainless steel swirl-plates.
200L unit: 10 nozzles (5 per side) twist on/off
400L unit: 12 flip over nozzles (6 per side) twist on/off
500L unit: 14 flip over nozzles (7 per side) twist on/off
GEARBOX
Single-speed with neutral position, oil-bath type.
CONTROLS
3 outlet with pressure regulator
400/500L models come standard with extra length hoses
- for tractor control mount.
MODEL DESCRIPTION
SUNTUFF 200L: APS71 Pump, 600mm fan
SUNTUFF 400L: APS71 Pump, 700mm Fan
SUNTUFF 500L: APS96 Pump, 800mm Fan
SUNTUFF 500L: APS96 Pump, 800mm Fan, Electric Controls
DEALER FITMENT OPTIONS
One - sided conveyor
CODE
D026-71
D047-71
D058-96
D058-96E
FAN SIZE (MM)
800
CODE
D99-99
Two - sided deflector
600
D99-98
Two - sided deflector
700
D99-92B
Two - sided deflector
800
D99-100
Bottom air deflectors
600/700/800
D99-63
Note: Not all options will fit all models. Extra charges may apply to fitment of some options.
1300 745 826
www.silvan.com.au
5
Trailed Compact Supaflo 1000L
Pictured: 1000L Compact Supaflo
MODEL SPECIFICATIONS
PUMP
Silvan oil-backed diaphragm type with nitrile
diaphragms and corrosion resistant, cast anodised
aluminium body with brass heads and manifold.
IDS960:93L/min. capacity, 5000kPa pressure.
IDS1401:135L/min. capacity, 5000kPa pressure.
FAN SIZE
700mm axial flow type, 8 bladed fan with curved
nylon reinforced blades and protective mesh cover.
NOZZLES
Flip-over type for dilute/concentrate spraying.
Ceramic HCC nozzles. 12 double sided nozzles
(6 per side) twist on/off.
GEARBOX
Single speed with neutral position, oil-bath type.
CONTROLS
FRAME
Galvanised steel with jockey wheel
and adjustable drawbar.
AGITATION
Pump bypass plus venturi agitator.
PRESSURE GAUGE
100mm, 0-60 bar glycerine filled gauge
with bar increments.
FILTRATION
Lid strainer and suction line filter.
WHEEL
EQUIPMENT
50mm Duraflex axle. 2 x 15” tubeless tyres on
painted rims (speed rating 30 km/h).
40 Bar electric section valves, master valve, electric
pressure regulator and in-cab controls
PTO DRIVESHAFT
Quality driveshaft with quick release pins and
safety cover.
Polytuff impact resistant polyethylene construction,
calibrated sight line, flip-top easy open lid,
40mm drain valve.
HP REQUIRED
Minimum 40 PTO HP
MAIN TANK
DIMENSIONS
L (mm)
W (mm)
H (mm)
KG (dry)
80L flush tank with top fill. Used to flush pump, filter,
spray lines and nozzles.
AB11AF8R
2860
1100
1500
300
FLUSH TANK
MODEL DESCRIPTION
SUPAFLO 1000L: IDS960 pump, 700mm fan & electric valve controls
FACTORY OPTIONS
6
HAND WASH TANK 15L fresh water hand wash tank.
Length measured with drawbar in shortest position
CODE
AB11AF8R
CODE
IDS1401 pump, 135L/min. capacity, 5000kPa pressure
D99-175
Two-sided deflector
D99-92B
Bravo 180S automatic rate controller
Bottom air deflectors
Extra charges may apply to fitment of some options.
D99-143
D99-63
1300 745 826
www.silvan.com.au
Trailed Supaflo 2000L
Pictured: 2000L Supaflo with
optional vineyard conveyor
MODEL SPECIFICATIONS
PUMP
FAN SIZE
Silvan oil-backed diaphragm type with nitrile diaphragms
and corrosion resistant, cast anodised aluminium body
with brass heads and manifold.
IDS1701:161L/min. capacity, 5000kPa pressure.
900mm axial flow type, 10 bladed fan with curved nylon
reinforced blades, air straightening vanes and protective
mesh cover.
NOZZLES
Flip-over type for dilute/concentrate spraying. Ceramic
jets, stainless steel swirl-plates. 16 double sided nozzles
(8 per side) twist on/off.
GEARBOX
2-speed with neutral position, oil-bath type.
A
Cable type with 2 x individual on/off, 1 x main on/off.
0-50 Bar pressure regulator.
B
40 bar electric section valves, master valve, electric
pressure regulator and in cab controls
CONTROLS
TANK
FRAME
Polytuff impact resistant polyethylene construction,
calibrated sight line, flip-top easy open lid, 40mm drain
valve and built-in chemical mixer. 40L fresh water hand
wash tank.
Galvanised steel with jockey wheel & adjustable drawbar.
AGITATION
Pump bypass plus venturi agitator.
PRESSURE
GAUGE
100mm, 0-60 bar glycerine filled gauge with bar
increments.
FILTRATION
Lid strainer, suction line strainer & stainless steel
nozzle filters.
50mm Duraflex axle with 50mm drop & sliding
A adjustment. 2 x 15” tubeless tyres on galvanised
rims (speed rating 30 km/h).
WHEEL
EQUIPMENT
Glideflex suspension axle, 2 x 15”
B tubeless tyres on galvanised rims
(max speed rating 30 km/h).
PTO
DRIVESHAFT
Quality Bondioli & Pavesi constant velocity driveshaft
with quick release pins & safety cover.
HP REQUIRED
Minimum 60 PTO HP
DIMENSIONS
L (mm) W (mm)
H (mm)
KG (dry)
3750
1530
640
DAB23AG8D
1500
Length measured with drawbar in shortest position
MODEL DESCRIPTION
CODE
A SUPAFLO 2000L: IDS1701 pump, 900mm fan
B SUPAFLO 2000L: IDS1701 pump, 900mm fan, electric valves, wide angle shaft & glideflex axle
FACTORY OPTIONS
DAB23AG8D
DAB23AF8G
CODE
Radak Conveyor - Manual adjustment of top and bottom wings (In lieu of standard fan cowling)
D99-135
Hydraulic kit for Radak Conveyor (top wings)
One sided conveyor
Two-sided poly vineyard conveyor
D99-155B
D99-41
11.00 x 16” multi-rib tyres
Bravo 180S automatic rate controller (Includes electric valves) to suit A
Bravo 180S automatic rate controller to suit B
Note: Not all options will fit all models. Extra charges may apply to fitting of some options.
Fitting of Radak includes upgrade to 920mm fan and uprated gearbox
D99-52
D99-142
D99-143
1300 745 826
www.silvan.com.au
D99-111
7
Trailed Stiletto 2000L
Pictured: 2000L Stiletto
MODEL SPECIFICATIONS
PUMP
Silvan oil-backed diaphragm type with nitrile diaphragms
and corrosion resistant, cast anodised aluminium body
with brass heads and manifolds.
IDS1701: 161L/min. capacity 5000kPa pressure.
FAN SIZE
900mm axial flow type, 10 bladed fan with curved nylon
reinforced blades, air straightening vanes and protective
mesh cover.
NOZZLES
GEARBOX
CONTROLS
TANK
Flip-over type for dilute/concentrate spraying.
Ceramic jets, stainless steel swirl-plates,
16 nozzles (8 per side) with twist on/off.
Oil-bath type, 2-speed with neutral position.
Cable type with 2 x individual on/off, 1 x main
A
on/off. 0-50 Bar pressure regulator.
40 bar electric section valves, master valve, electric
B
pressure regulator and in cab controls
Polytuff impact resistant polyethylene construction,
calibrated sight line, easy open lid, 40mm drain valve and
built-in 15L fresh water tank.
FRAME
AGITATION
PRESSURE
GAUGE
Galvanised steel with jockey wheel & adjustable drawbar.
Pump bypass plus venturi agitator.
100mm, 0-60 bar glycerine filled gauge with bar
increments.
Lid strainer, suction line strainer and stainless steel nozzle
FILTRATION
filters.
50mm Duraflex axle with 50mm drop & sliding
A adjustment. 2 x 15” tubeless tyres on galvanised rims
WHEEL
(speed rating 30 km/h).
EQUIPMENT
Glideflex suspension axle, 2 x 15” tubeless tyres on
B
galvanised rims (max speed rating 30 km/h).
Quality
Bondioli & Pavesi driveshaft with quick release pins
PTO
DRIVESHAFT & safety cover.
HP REQUIRED Minimum 60 PTO HP
DIMENSIONS L (mm)
DST23AG8D
W (mm)
H (mm)
Kg (dry)
3800
1500
1500
640
Length measured with drawbar in shortest position
MODEL DESCRIPTION
A STILETTO 2000L: IDS1701 pump, 900mm fan
CODE
DST23AG8D
B STILETTO 2000L: IDS1701 pump, 900mm fan, electrics, glideflex axle, wide angle shaft
DST23AF8G
STILETTO 2000L: IDS1701 pump, 900mm fan, glidefex axle, wide angle shaft,
B Bravo 180S automatic rate controller
DST23AB8G
Note: Not all options will fit all models.Extra charges may apply to fitment of some options.
8
1300 745 826
www.silvan.com.au
Trailed Stiletto Powerhead 2000L
See page 16
Pictured: 2000L Stiletto Powerhead
MODEL SPECIFICATIONS
PUMP
FAN SIZE
NOZZLES
GEARBOX
CONTROLS
TANK
MODEL SPECIFICATIONS
Silvan oil-backed diaphragm type with nitrile
diaphragms and corrosion resistant, cast anodised
aluminium body with brass heads and manifolds.
IDS1701: 161L/min. capacity 5000kPa pressure.
920mm axial flow type, 10 bladed fan with curved
nylon reinforced blades, centrifugal clutch for soft
engagement/disengagement and protective mesh cover.
24 flip-over nozzle bodies for dilute/concentrate
spraying with on/off. 12 ceramic hollow cone nozzles
per side and 12 ceramic jets with stainless steel
swirl-plates per side.
Oil-bath type, 2-speed with neutral position.
Electric section valves, master valve, electric pressure
adjustment and in cab control box
Polytuff impact resistant polyethylene construction,
calibrated sight line, easy open lid, 40mm drain valve,
built-in 15L fresh water tank and chemical mixer
FRAME
Galvanised steel with jockey wheel and
adjustable drawbar.
AGITATION
Pump bypass plus venturi agitator.
PRESSURE
GAUGE
100mm, 0-60 bar glycerine filled gauge with bar
increments.
FILTRATION
Lid strainer, suction line strainer and stainless steel
nozzle filters.
WHEEL
EQUIPMENT
PTO
DRIVESHAFT
Glideflex suspension axle with 15” tubeless tyres on
galvanised rims (max speed rating 30 km/h).
HP REQUIRED
Minimum 60 PTO HP
DIMENSIONS
L (mm)
W (mm)
H (mm)
Kg (dry)
4100
1700
1500
680
DST25PF8G
MODEL DESCRIPTION
STILETTO 2000L: IDS1701 pump, 920mm fan, electric valve controls, Powerhead, Glideflex axle,
wide angle shaft
STILETTO 2000L: IDS1701 pump, 920mm fan, Powerhead, Glideflex axle, wide angle shaft,
Bravo 180S automatic rate controller
Quality Bondioli & Pavesi constant velocity driveshaft
with quick release pins & safety cover.
Length measured with drawbar in shortest position
CODE
DST23PF8G
DST23PB8G
Note: Not all options will fit all models.Extra charges may apply to fitment of some options.
1300 745 826
www.silvan.com.au
9
Trailed G2 Supaflo 2000L
See page 17
Pictured: 2000L G2 Supaflo
with Powerhead conveyor
MODELSPECIFICATIONS
SPECIFICATIONS
MODEL
PUMP
Silvan oil-backed diaphragm type with nitrile
diaphragms and corrosion resistant, cast aluminium
body with brass heads and manifolds.
IDS1701: 161L/min. capacity 5000kPa pressure.
FAN SIZE
920mm axial flow type, 10 bladed fan with curved
nylon reinforced blades, centrifugal clutch for soft
engagement/disengagement and protective mesh
cover.
NOZZLES
24 flip-over nozzle bodies for dilute/concentrate
spraying with on/off. 12 Ceramic hollow cone nozzles
per side and 12 ceramic jets with stainless steel swirlplates per side. (16 per side with the Radak conveyor).
GEARBOX
2-speed with neutral position, oil-bath type.
CONTROLS
HAND WASH
TANK
30L polytuff tank with top fill. Tap located next to
chemical mixer tank drawer.
MIXER TANK
Chemical mixer drawer with tap controls for rinse,
transfer and main tank rinse. Venturi transfer back to
main tank.
FRAME
Galvanised steel, heavy duty stand & adjustable drawbar.
AGITATION
Pump bypass plus venturi agitator.
PRESSURE GAUGE Glycerine filled gauge located on valve bank.
FILTRATION
Suction line filter, pressure filter, nozzle cup strainers.
WHEEL
EQUIPMENT
Glideflex axle with 15” implement tyres
(speed rating 30km/h).
40 Bar electric section valves with master valve,
electric pressure regulator and in cab controls
PTO DRIVESHAFT
Quality Bondioli & Pavesi constant velocity driveshaft
with quick release pins & safety cover.
Polytuff impact resistant polyethylene construction
with LED tank level indicator. 50mm camlock top &
bottom fill.
HP REQUIRED
Minimum 60 PTO HP
MAIN TANK
DIMENSIONS
L (mm)
W (mm)
H (mm)
Kg (dry)
FLUSH TANK
135L polytuff tank with top fill. Used to flush pump,
filter, spray lines and nozzles.
AB23PE4G
4390
1600
1710
905
Length measured with drawbar in shortest position
MODEL DESCRIPTION
SUPAFLO G2 2000L: IDS1701 pump, 920mm fan, electric valve controls, Powerhead, Glideflex axle
AB23PE4G
SUPAFLO G2 2000L: IDS1701 pump, 920mm fan, electric valve controls, Radak, Glideflex axle
AB23RE4G
FACTORY OPTIONS
CODE
CODE
Hydraulic kit for Radak Conveyor (top wings)
D99-155B
Bravo 180S automatic rate controller
D99-143
Tandem suspension axle with 10 x 15” tyres
D99-75
BKT flotation tyres - 558-400/55 - 22.5 (in lieu of standard singles)
D99-79
Note: Not all options will fit all models. Extra charges may apply to fitment of some options.
10
1300 745 826
www.silvan.com.au
Trailed 3000L Orchard Sprayer
See page 16
Pictured: 3000L unit with Powerhead
conveyor and optional flotation tyres
MODEL
MODELSPECIFICATIONS
SPECIFICATIONS
HAND WASH TANK 55L polytuff tank with top fill.
PUMP
Silvan oil-backed diaphragm type with nitrile
diaphragms and corrosion resistant, cast aluminium
body with brass heads and manifolds.
IDS2001: 182L/min. capacity 5000kPa pressure.
CHEMICAL
INDUCTION
Venturi suction probe.
920mm axial flow type, 10 bladed fan with curved
nylon reinforced blades, centrifugal clutch for soft
engagement/disengagement and protective mesh cover.
FRAME
Galvanised steel, heavy duty stand & adjustable drawbar.
FAN SIZE
AGITATION
Pump bypass plus venturi agitator.
PRESSURE GAUGE Glycerine filled gauge located on valve bank.
NOZZLES
24 flip-over nozzle bodies for dilute/concentrate
spraying with on/off. 12 ceramic hollow cone nozzles
per side and 12 ceramic jets with stainless steel swirlplates per side. (16 per side with Radak conveyor)
GEARBOX
2-speed with neutral position, oil-bath type.
CONTROLS
40 Bar electric section valves with master valve,
electric pressure regulator and in cab controls
MAIN TANK
3400L polytuff impact resistant polyethylene
construction, calibrated sightline, flip top lid, 50mm
camlock bottom fill.
FLUSH TANK
205L polytuff tank with top fill. Used to flush pump,
filter, spray lines and nozzles.
FILTRATION
Suction line filter, pressure filter, nozzle cup strainers.
WHEEL EQUIP
Glideflex axle with 16” implement tyres
(speed rating 30km/h).
PTO DRIVESHAFT
Quality Bondioli & Pavesi constant velocity driveshaft
with quick release pins & safety cover.
HP REQUIRED
Minimum 60 PTO HP
DIMENSIONS
L (mm)
W (mm)
H (mm)
Kg (dry)
3995
1755
1800
1000 (approx)
AB63PE4G
Length measured with drawbar in shortest position
MODEL DESCRIPTION
SUPAFLO 3000L: IDS2001 pump, 920mm fan, electric valve controls, Powerhead, Glideflex axle
AB64PF7G
SUPAFLO 3000L: IDS2001 pump, 920mm fan, electric valve controls, Radak, Glideflex axle
AB64RF7G
FACTORY OPTIONS
CODE
CODE
Hydraulic kit for Radak Conveyor (top wings)
D99-155B
Bravo 180S automatic rate controller
D99-143
Tandem suspension axle with 10 x 15” tyres
D99-75
BKT flotation tyres - 558-400/55 - 22.5 (in lieu of standard singles)
D99-79
IDS2600 pump,249L/min. capacity, 5000kPa pressure.
D99-149
Quick turn hitch
D99-170
Note: Not all options will fit all models. Extra charges may apply to fitment of some options.
1300 745 826
www.silvan.com.au
11
Trailed Supaflo 3500L
See page 17
Pictured: 3500L Supaflo
MODEL SPECIFICATIONS
PUMP
Silvan oil-backed diaphragm type with nitrile
diaphragms and corrosion resistant, anodised cast
aluminium body with brass heads and manifolds.
IDS1701: 161L/min. capacity, 5000kPa pressure.
IDS2600: 249L/min. capacity, 5000kPa pressure.
FAN SIZE
900mm axial flow type, 10 bladed fan with curved
nylon reinforced blades with air straightening vanes
and protective mesh cover.
NOZZLES
Flip-over type for dilute/concentrate spraying. Ceramic
jets, stainless steel swirl-plates. 16 double sided
nozzles (8 per side) twist on/off.
GEARBOX
2-speed with neutral position, oil-bath type.
CONTROLS
40 Bar electric section valves with master valve,
electric pressure regulator and in cab controls
TANK
Polytuff impact resistant polyethylene construction,
calibrated sight line, built-in chemical mixer and
40L fresh water hand wash tank.
FRAME
Galvanised steel with jockey wheel and
adjustable drawbar.
AGITATION
Pump bypass plus venturi agitator.
PRESSURE
GAUGE
Glycerine filled gauge located on valve bank.
FILTRATION
Lid strainer, suction line filter and nozzle cup strainers.
WHEEL
EQUIPMENT
Glideflex suspension axle fitted with 16” tyres and
galvanised rims (speed rating 30km/h).
PTO DRIVESHAFT
Quality Bondioli & Pavesi constant velocity driveshaft
with quick release pins & safety cover.
HP REQUIRED
Minimum 80 PTO HP
DIMENSIONS
L (mm)
W (mm)
H (mm)
Kg (dry)
4755
1830
1800
800
Length measured with drawbar in shortest position
MODEL DESCRIPTION
CODE
SUPAFLO 3500L: IDS1701 pump, 900mm fan, electric valve controls
DAB33AF7G
SUPAFLO 3500L: IDS2600 pump, 900mm fan, electric valve controls
DAB36AF7G
FACTORY OPTIONS
CODE
Radak Conveyor - Manual adjustment of top and bottom wings (In lieu of standard fan cowling)
D99-135
Hydraulic kit for Radak Conveyor (top wings)
D99-155B
One sided conveyor
D99-41
Two-sided poly vineyard conveyor
D99-111
Bravo 180S automatic rate controller
D99-143
Tandem suspension axle with 10 x 15” wheels
D99-75
BKT flotation tyres 558-400/55 - 22.5 (in lieu of standard singles)
D99-79
Note: Not all options will fit all models. Extra charges may apply to fitment of some options.
Fitment of Radak includes upgrade to 920mm fan and uprated gearbox
-
12
1300 745 826
www.silvan.com.au
Trailed Supaflo Powerhead
See page 16
Pictured: 3500L Supaflo Powerhead
MODEL SPECIFICATIONS
PUMP
Silvan oil-backed diaphragm type with nitrile diaphragms
and corrosion resistant, cast anodised aluminium body
with brass heads and manifolds.
IDS1701: 161L/min. capacity 5000kPa pressure.
AGITATION
PRESSURE
GAUGE
920mm axial flow type, 10 bladed fan with curved nylon
reinforced blades, centrifugal clutch for soft engagement/
disengagement and protective mesh cover.
FILTRATION
FAN SIZE
NOZZLES
24 flip-over nozzle bodies for dilute/concentrate spraying
with on/off. 12 ceramic hollow cone nozzles per side and
12 ceramic jets with stainless steel swirl-plates per side.
GEARBOX
Oil-bath type, 2-speed with neutral position.
CONTROLS
40 Bar electric section valves, master valve, electric
pressure adjustment and in cab controls.
Polytuff impact resistant polyethylene construction,
calibrated sight line, easy open lid, 40mm drain valve, 40
litre fresh water tank and 50mm bottom fill.
TANK
FRAME
WHEEL
EQUIPMENT
PTO
DRIVESHAFT
HP REQUIRED
DIMENSIONS
2000L unit
3500L unit
Galvanised steel with jockey wheel & adjustable drawbar.
Pump bypass plus venturi agitator.
100mm, 0-60 bar glycerine filled gauge with bar
increments.
Lid strainer, suction line strainer and stainless steel nozzle
filters.
Glideflex suspension axle with 15” tubeless tyres on
A
galvanised rims (max speed rating 30 km/h).
Glideflex suspension axle with 16” tubeless tyres on
B
galvanised rims (max speed rating 30 km/h).
Quality Bondioli & Pavesi constant velocity driveshaft with
quick release pins and safety cover.
Minimum 60 PTO HP
L (mm)
W (mm)
H (mm)
Kg (dry)
4600
5200
1700
1830
1530
1800
680
640
Length measured with drawbar in shortest position
MODEL DESCRIPTION
SUPAFLO 2000 LITRE: IDS1701 pump, 920mm fan, electric valve controls, Powerhead, Glideflex axle,
A
wide angle shaft
B
SUPAFLO 3500 LITRE: IDS1701 pump, 920mm fan, Powerhead, Electric valve controls, Glideflex axle,
Wide angle shaft.
FACTORY OPTIONS
CODE
DAB23PF7G
DAB33PF7G
CODE
Bravo 180S automatic rate controller
Tandem suspension axle with 10 x 15” tyres
IDS2600 pump, 249L/min. capacity, 5000kPa pressure.
D99-143
D99-75
D99-149
Note: Not all options will fit all models. Extra charges may apply to fitment of some options.
1300 745 826
www.silvan.com.au
13
Trailed G2 Supaflo 4000L
See page 16
Pictured: 4000L G2 Supaflo
with Powerhead
MODEL SPECIFICATIONS
PUMP
FAN SIZE
NOZZLES
Silvan oil-backed diaphragm type with nitrile diaphragms
and corrosion resistant, cast aluminium body with brass
heads and manifolds.
IDS 1701:161L/min. capacity, 5000kPa pressure.
HAND WASH
TANK
60L polytuff tank filled through cap. Tap located next to
chemical mixer tank drawer.
MIXER TANK
Chemical mixer drawer with tap controls for rinse, transfer
and main tank rinse. Venturi transfer back to main tank.
920mm axial flow type,10 bladed fan with curved nylon
reinforced blades, centrifugal clutch for soft engagement/
disengagement and protective mesh cover.
FRAME
Galvanised steel, heavy duty stand & adjustable drawbar.
AGITATION
Pump bypass plus venturi agitator.
PRESSURE
GAUGE
Glycerine filled gauge located on valve bank.
FILTRATION
Suction line filter, pressure filter, nozzle cup strainers.
WHEEL
EQUIPMENT
Glideflex axle with 13.0/65 - 18” implement tyres
(speed rating 30km/h).
PTO
DRIVESHAFT
Quality Bondioli & Pavesi constant velocity driveshaft with
quick release pins & safety cover.
24 flip-over nozzle bodies for dilute/concentrate spraying
with on/off. 12 Ceramic hollow cone nozzles per side and
12 ceramic jets with stainless steel swirl plates per side.
(16 per side with the Radak conveyor).
GEARBOX
2-speed with neutral position, oil-bath type.
CONTROLS
40 Bar electric section valves with master valve, electric
pressure regulator and in cab controls.
MAIN TANK
Polytuff impact resistant polyethylene construction with
LED tank level indicator. 50mm camlock top & bottom fill.
FLUSH TANK
330L polytuff tank with top fill. Used to flush pump, filter,
spray lines and nozzles.
HP REQUIRED Minimum 80 PTO HP
DIMENSIONS
AB43PE2G
L (mm)
W (mm)
H (mm)
Kg (dry)
5550
1880
2020
1400
Length measured with drawbar in shortest position
MODEL DESCRIPTION
SUPAFLO G2 4000L: IDS1701 pump, 920mm fan, electric valve controls, Powerhead, Glideflex axle
SUPAFLO G2 4000L: IDS1701 pump, 920mm fan, electric valve controls, Radak, Glideflex axle
FACTORY OPTIONS
AB43PE2G
AB43RE2G
CODE
Hydraulic kit for Radak Conveyor (top wings)
D99-155B
Bravo 180S automatic rate controller
D99-143
Tandem suspension axle with 11.5/80 - 15.3 tyres
D99-78
BKT flotation tyres - 558-400/55 - 22.5 (in lieu of singles)
D99-79
IDS2001 pump,182L/min. capacity, 5000kPa pressure.
D99-148
IDS2600 pump,249L/min. capacity, 5000kPa pressure.
D99-149
CODE
Note: Not all options will fit all models. Extra charges may apply to fitment of some options.
14
1300 745 826
www.silvan.com.au
Trailed Supaflo 4200L
See page 17
Pictured: 4200L Supaflo
MODELSPECIFICATIONS
SPECIFICATIONS
MODEL
PUMP
FAN SIZE
NOZZLES
Silvan oil-backed diaphragm type with nitrile diaphragms
and corrosion resistant, anodised cast aluminium body
with brass heads and manifolds.
IDS1701: 161L/min. capacity, 5000kPa pressure.
IDS2600: 249L/min. capacity, 5000kPa pressure.
AGITATION
Pump bypass plus venturi agitator.
PRESSURE
GAUGE
Glycerine filled gauge located on valve bank.
FILTRATION
Lid strainer, suction line filter, nozzle cup strainers.
900mm axial flow type, 10 bladed fan with curved nylon
reinforced blades, air straightening vanes and protective
mesh cover.
Flip-over type for dilute/concentrate spraying. Ceramic
jets, stainless steel swirl-plates. 16 double sided nozzles
(8 per side) twist on/off.
CHEMICAL
INDUCTION
Venturi suction probe with detachable hose.
WHEEL
EQUIPMENT
Glideflex suspension axle fitted with 18” implement tyres
and galvanised rims (speed rating 30km/h).
PTO
DRIVESHAFT
Quality Bondioli & Pavesi constant velocity driveshaft with
quick release pins & safety cover.
GEARBOX
2-speed with neutral position, oil-bath type.
CONTROLS
40 Bar electric section valves with master valve, electric
pressure regulator and in cab controls
Polytuff impact resistant polyethylene construction,
calibrated sight line.
TANK
FRAME
Galvanised steel with jockey wheel & adjustable drawbar.
HP REQUIRED Minimum 90 PTO HP
DIMENSIONS
DAB53AF2G
MODEL DESCRIPTION
SUPAFLO 4200L: IDS1701 pump, 900mm fan, electric controls
SUPAFLO 4200L: IDS2600 pump, 900mm fan, electric controls
FACTORY OPTIONS
L (mm)
W (mm)
H (mm)
Kg (dry)
4830
1950
2050
1000 (approx.)
Length measured with drawbar in shortest position
CODE
DAB53AF2G
DAB56AF2G
CODE
Radak Conveyor - Manual adjustment of top and bottom wings (In lieu of standard cowling)
D99-135
Hydraulic kit for Radak Conveyor (top wings)
D99-155B
Bravo 180S automatic rate controller
D99-143
Two sided vineyard conveyor
D99-111
One sided conveyor 900mm
D99-41
Tandem suspension axle with 11.5/80 - 15.3 tyres
D99-78
BKT flotation tyres - 558-400/55 - 22.5 (in lieu of standard singles)
D99-79
Note: Not all options will fit all models. Extra charges may apply to fitment of some options.
Fitment of Radak includes upgrade to 920mm fan and uprated gearbox
1300 745 826
www.silvan.com.au
15
Powerhead Conveyor
Adjustable top deflectors
Non-drip flip over nozzles for 2
application rates and off position
Poly cowl to suit 920mm fan
Stainless steel spray lines
920mm axial flow fan with curved
reinforced nylon blades
Mesh guarding
for safety
Multi adjustable
lower wings
Silvan’s Powerhead® air delivery system is a revolutionary and efficient
conveyor that helps produce an adjustable spray-laden air stream to
match the shape and height of the canopy.
It has been designed specifically for tree crops and will suit crops such
as apples, pears, almonds and stone fruit which have low canopies.
The new design features internal vanes which direct the airstream
into the canopy and maximise the fan’s output without the need for
straightening vanes in the fan’s cowling. The result is a quieter operation
with less tractor horsepower required.
The small top wings direct air from the fan into the canopy rather than
allowing it to escape into the atmosphere. This aids in reducing the risk
of spray drift from the sprayer.
The lower wings direct airflow from the Powerhead® into the canopy
from underneath, opening up the interior for efficient spray penetration
and when combined with up to 24 nozzles per side, make almost any
application rate achievable.
16
By directing airflow into both the upper and lower regions of the target
canopy the spray laden air is drawn into the centre through a venturi
effect. The result is deeper and more even canopy penetration on both
sides of the leaves while avoiding damage to fruit or flowers.
MODEL SPECIFICATIONS
CONVEYOR
Aluminium construction, double-sided
conveyor. Top sections are manually
adjustable for tree height, bottom wings
adjustable for coverage on lower branches.
Patented Air Volute delivery system.
NOZZLES
Flip-over type for dilute/concentrate spraying.
Ceramic hollow cone jets with 24 twist on/off
nozzles (12 per side).
SUITED ROW WIDTH
Up to 6 metres
SUITED TREE HEIGHT Up to 5 metres
1300 745 826
www.silvan.com.au
Radak Conveyor
Growers with taller crop canopies may prefer the Radak® conveyor which
comes in three options to suit different canopy shapes and sizes.
The patented air volute design maximises the use of the airflow generated
by the 920mm fan, the Radak ensures thorough coverage of the targeted
canopy by directing airflow into the foliage from underneath via the
bottom wings. The venturi effect opens up the tree canopy to aid spray
penetration and coverage.
Radak®
Silvan’s
conveyor is ideal for tall tree crops throughout Australia
such as macadamias, avocados, mangoes, olives, citrus and lychees.
STANDARD RADAK
Code: D99-135
Row width: Up to 10ms
Tree height: 5 - 6ms
1300 745 826
MODEL SPECIFICATIONS
CONVEYOR
Aluminium construction, double-sided conveyor.
Top sections via manual or hydraulic operation
adjustable for tree height, bottom wings lift for
transport. Patented Air Volute delivery system.
NOZZLES
Flip-over type for dilute/concentrate spraying.
Ceramic hollow cone jets with 32 twist on/off
nozzles (16 per side).
TALL TOP RADAK STD BOTTOM WINGS
TALL TOP RADAK WIDE BOTTOM WINGS
Code: D99-135T
Row width: Up to 10ms
Tree height: Up to 10ms
Code: D99-135TW
Row width: Up to 12ms
Tree height: Up to 10ms
www.silvan.com.au
17
Sprayer Options
CONSTANT VELOCITY PTO.
DOUBLE SIDED VINEYARD CONVEYOR
The Double sided vineyard conveyor is designed to
maximise the air output of the 900mm axial flow fan
when spraying a vertical canopy such as vines or trellis
grown tree crops.
There is no air lost from the top of the fan as it is all
directed outwards and into the canopy. The adjustable
double sided conveyor includes the following features:
• Brings the air stream closer to the canopy
• Maximises the air capacity of the fan for larger,
denser canopies
• Stainless steel and poly construction
• 12 flip over nozzles each side allows accurate spray
placement to canopy
• Ceramic hollow cone jets on one side of flip over
nozzles for low pressure spraying
• Adjustable vane in top of conveyor for smaller canopies
or early season growth
The constant velocity (wide angle drive) PTO provides
reliable performance with a smoother and sharper
turning radius on tight headlands.
WHEELS & TYRES
Many of Silvan’s horticulture/viticulture sprayers can
be fitted with a range of tyres and rims including ‘All
Terrain’ tyres on 10.5 x 15” galvanised rims, ‘Multi-Rib’
tyres on 11 x 16” galvanised rims or ‘Gripster’ tyres on
12.5 x 18” galvanised rims (to suit boggy conditions
such as those in Banana plantations). Note: Optional
axles may be required to fit Gripster style tyres.
GLIDEFLEX SUSPENSION SYSTEM
The patented Glideflex suspension system ensures
a smooth ride whether the tank is full or empty. This
minimises wear and tear on the sprayer and tractor,
and improves the ride comfort for the operator.
SNORKEL - HELPS TO REDUCE DOWNTIME AND
DAMAGE TO FRUIT
The Snorkel has been designed to help prevent
damage to fruit caused by the delivery of air that
includes sand and debris. It also helps to minimise
downtime by avoiding blocked fan guards. The
Silvan Snorkel is made from polytuff impact resistant
polyethylene which is lightweight and robust and can
be easily fitted to the fan cowl of most Silvan 900mm
air assist units.
TANDEM SUSPENSION AXLE
ONE SIDED VINEYARD CONVEYOR
Ideal for use in tree crops, the conveyor directs the
air outwards and into the canopy increasing spray
efficiency.
• A vane at the top of the conveyor can be adjusted to
suit smaller canopies or early season growth.
• Fibreglass construction with stainless
steel spray lines.
• Flip-over Ceramic hollow cone nozzles on one side
provides accurate spray coverage
and easy changeover for spraying at
lower pressure.
18
The rugged durability of the Australian designed
Simplicity tandem suspension axle gives a smoother
ride over rough or uneven terrain. This optional axle
assembly is designed to share the load over both
wheels, reducing impact to the frame and spray heads
and virtually eliminating body roll for faster travel and
effective spray application.
1300 745 826
www.silvan.com.au
High Pressure Pumps
APS71
APS121
APS96
MODEL SPECIFICATIONS
PUMP
L/MIN @50 BAR
MAX PRESSURE
kPA
KG
SHAFT
APS71
71
4000
16.5
Male - Female
APS71
71
4000
16.5
Male - Male
APS96
95
4000
21.5
Male - Female
APS96
95
4000
21.5
Male - Male
CAPS096
APS121
115
5000
36.0
Male - Male
CAPS121
APS145
145
5000
51.0
Male - Male
CAPS145
APS166
163
5000
51.0
Male - Male
CAPS166
IDS960
93
5000
30.3
Male - Male
ZZCDS960
IDS1401
135
5000
45
Male - Male
ZZCDS1401
IDS1701
161
5000
76.0
Male - Male
CDS1701
IDS2001
182
5000
76.0
Male - Male
CDS2001
IDS2200
208
5000
60.0
Male - Male
CDS2200-1
IDS2600
249
5000
60.0
Male - Male
CDS2600-1
BRASS MANUAL
CONTROL VALVE
Suitable for APS series, IDS1701 & IDS2001 pumps
CODE
CAPS071
CAPS071S
ZZCAPS96MF
BRA-17020623
Brass Manual
Control Valve
IDS1701 / IDS2001
APS145
1300 745 826
APS166
www.silvan.com.au
IDS2200 / IDS2600
19
Turbomisers
20
The Turbomiser utilises the best air shear
technology to achieve optimum spray coverage
using less water. A range of spray heads are
available to suit the application.
1300 745 826
www.silvan.com.au
Linkage P42E & P45E Turbomiser
Pictured: P42E, 400L with
optional double sided
diffuser head
Pictured: P45E, 400L
with optional Super
Cannon head
MODEL SPECIFICATIONS
PUMP
FAN SIZE
NOZZLES
CONTROLS
GEARBOX
FRAME
CD32 centrifugal pump 140L/min constructed from
toughened nylon. Stainless steel shaft & viton/ceramic seal.
P42E: 420 mm dia. turbine fan, 3900 rpm.
Air speed 228 m/s, 820 km/h Air volume 4000 m3h.
Power consumed 18 kw / 35HP.
P45E: 450 mm dia. turbine fan, 4500 rpm.
Air speed 188 m/s, 675 km/h. Air volume 5400 m3h.
Power consumed 28 kw / 40HP.
Air shear
Two sided electric on/off control with control box mounted
in cabin. Rotary plate distribution regulators with 15
settings and manual pressure adjustment.
Multiplication type through multi-grip, multi-vee belt and
pulley, over-run free wheeling hub
Galvanised RHS steel construction, cat II linkage
MODEL DESCRIPTION
400L P42E LINKAGE TURBOMISER: P42E Fan (spray head not included)
400L P45E LINKAGE TURBOMISER: P45E Fan (spray head not included)
FACTORY OPTIONS
AGITATION
Polytuff impact resistant polyethylene construction,
calibrated sight line, non-spill lids, hydro chemical mixer
in larger basket, lids with basket strainers, separate inbuilt 18L fresh water hand wash tank.
Bypass and pneumatic
PRESSURE
GAUGE
Protected 100 mm glycerine gauge fitted at front of
sprayer
FILTRATION
Lid strainer and suction line strainer
PTO
DRIVESHAFT
Quality Bondioli & Pavesi driveshaft with quick release
pins & safety cover
TANK
HP REQUIRED Minimum 35 PTO HP
DIMENSIONS
GTM-P45N
(LESS HEAD)
L (mm)
W (mm)
H (mm)
Kg (dry)
1000
1100
1150
207
CODE
GTM-P42N
GTM-P45N
CODE
Super cannon for P42E
GT42-1
Super cannon for P45E
GT45-1
Manual turntable for Super Cannon
GT55-4
Electric turntable for Super Cannon
GT55-9
Double sided diffuser head (5 outlets per side) for P42E
GT40-2
Double sided diffuser head (5 outlets per side) for P45E
GT45-2
Vineyard/skiprow head 4 heads 4x4 (plus 2 extra cannons) for P45E
GT45-16
Note: Not all options will fit all models. Extra charges may apply to fitment of some options. Sprayers depicted with optional sprayhead
1300 745 826
www.silvan.com.au
21
Linkage P50E Turbomiser
See page 28
Pictured: P50E 600L with
optional vineyard head
MODEL SPECIFICATIONS
PUMP
CD32 centrifugal pump, 140L/min. constructed from
toughened nylon. Stainless steel shaft & viton/ceramic seal.
FAN SIZE
P50E: 500mm dia. turbine fan, 4000 rpm. Air speed 175
m/s. 640 km/h. Air volume 7550 m3h.
Power consumed 40 kw / 55HP.
NOZZLES
GEARBOX
Air shear.
Multiplication type through multi-grip, multi-vee belt and
pulley, over-run free wheeling hub.
CONTROLS
Two sided electric on/off control with control box mounted
in cabin. Rotary plate distribution regulators with 15
settings and manual pressure adjustment.
PRESSURE
GAUGE
Protected 100mm glycerine gauge fitted at front
of sprayer.
MODEL DESCRIPTION
600L P50E LINKAGE TURBOMISER: P50E fan (spray head not included)
FACTORY OPTIONS
TANK
Polytuff impact resistant polyethylene construction,
calibrated sight line, non-spill lids, hydro chemical mixer
in larger basket, lids with basket strainers,
separate in-built 18L fresh water hand wash tank.
Galvanised RHS steel construction, cat II linkage.
Bypass and pneumatic.
Lid strainer and suction line strainer.
Quality Bondioli & Pavesi driveshaft with quick release
pins & safety cover.
Minimum 55 PTO HP.
FRAME
AGITATION
FILTRATION
PTO
DRIVESHAFT
HP REQUIRED
DIMENSIONS L (mm)
GTM-P50N
1100
(LESS HEAD)
W (mm)
H (mm)
Kg (dry)
1450
1150
220
CODE
GTM-P50N
CODE
Vineyard/skiprow head, 4 heads 4 x 4 (plus 2 extra cannons)
Bravo 180S automatic rate controller
Orchard head
Super Cannon head
Electric turntable for Super Cannon
GT55-11
GT-24
GT55-12
GT55-1
GT55-9
Manual turntable for Super Cannon
GT55-4
Note: Not all options will fit all models. Extra charges may apply to fitment of some options.Sprayer depicted with optional sprayhead.
22
1300 745 826
www.silvan.com.au
Linkage
LinkageP55DS
P55DSTurbomiser
Turbomiser
See page 28
Pictured: P55DS 600L with
optional Super Cannon head
MODEL SPECIFICATIONS
PUMP
FAN SIZE
NOZZLES
GEARBOX
CONTROLS
PRESSURE
GAUGE
CD32 centrifugal pump, 140L/min. constructed from
toughened nylon. Stainless steel shaft & viton/
ceramic seal.
P55DS:550mm dia. turbine fan, 3700 rpm.
Air speed 170 m/s. 610 km/h. Air volume 14000 m3h.
Power consumed 50 kw / 70HP.
Air shear.
Multiplication type through multi-grip, multi-vee belt and
pulley, over-run free wheeling hub.
Two sided electric on/off control with control box mounted
in cabin. Rotary plate distribution regulators with 15
settings and manual pressure adjustment.
Protected 100mm glycerine gauge fitted at front
of sprayer
MODEL DESCRIPTION
TANK
Polytuff impact resistant polyethylene construction,
calibrated sight line, non-spill lids, hydro chemical mixer
in larger basket, lids with basket strainers, separate inbuilt 18L fresh water hand wash tank.
Galvanised RHS steel construction, cat II linkage.
Bypass and pneumatic.
Lid strainer and suction line strainer.
Quality Bondioli & Pavesi driveshaft with quick release
pins & safety cover.
Minimum 70 PTO HP.
FRAME
AGITATION
FILTRATION
PTO
DRIVESHAFT
HP REQUIRED
DIMENSIONS L (mm)
GTM-P55DS
1100
(LESS HEAD)
W (mm)
H (mm)
Kg (dry)
1450
1150
250
CODE
600L P55DS LINKAGE TURBOMISER: P55DS fan (Spray head not included)
FACTORY OPTIONS
GTM-P55DS
CODE
Vineyard head - 4 Heads - 4 x 5 (plus 2 extra cannons)
GT55D-40
Orchard Cannon head
GT55-13
Bravo 180S automatic rate controller
Super Cannon head
GT-24
GT55D-1
Hydraulic turntable for Super Cannon
GT55D-9
Note: Not all options will fit all models. Extra charges may apply to fitment of some options. Sprayer depicted with optional sprayhead.
1300 745 826
www.silvan.com.au
23
Linkage P50E Two Row Turbomiser
Pictured: P50E 600L Two Row Turbomiser
MODEL SPECIFICATIONS
PUMP
CD32 centrifugal pump, 140L/min. constructed from
toughened nylon. Stainless steel shaft and viton/
ceramic seal.
BOOM
Two row spray head, 4 heads 4 x 4. Independent left/
right hydraulic fold with hydraulic lift
(3 sets of tractor remotes required).
FAN SIZE
NOZZLES
P50E: 500mm dia. turbine fan, 4000 rpm.
Air speed 175 m/s. 640 km/h. Air volume 7550 m3h.
Power consumed 40 kw / 55HP.
Air shear.
GEARBOX
Multiplication type through multi-grip, multi-vee belt
and pulley, over-run free wheeling hub.
CONTROLS
Two sided electric on/off control with control box
mounted in cabin. Rotary plate distribution regulators
with 15 settings.
TANK
FRAME
AGITATION
PRESSURE
GAUGE
FILTRATION
PTO
DRIVESHAFT
HP REQUIRED
DIMENSIONS
GTM-P50N
(LESS HEAD)
MODEL DESCRIPTION
600 LITRE P50E LINKAGE TWO ROW TURBOMISER: P50E fan, two row spray head
FACTORY OPTIONS
Bravo 180S automatic rate controller
Polytuff impact resistant polyethylene construction,
calibrated sight line, non-spill lids, hydro chemical
mixer in larger basket, lids with basket strainers,
separate in-built 18 litre fresh water hand wash tank.
Galvanised RHS steel construction, cat II linkage.
Bypass and pneumatic.
Protected 100mm glycerine gauge fitted at front
of sprayer.
Lid strainer and suction line strainer.
Quality Bondioli & Pavesi driveshaft with quick release
pins & safety cover.
Minimum 55 PTO HP.
L (mm)
W (mm)
H (mm)
Kg (dry)
1100
1450
1150
220
CODE
GTM-P50NP
CODE
GT-24
--
24
1300 745 826
www.silvan.com.au
Linkage Airboom Turbomiser
Pictured: P55DS 600L with 7m Airboom
MODEL SPECIFICATIONS
PUMP
BOOM OPTIONS
BOOM ARM
CD32 centrifugal pump 140L/min. constructed
from toughened nylon. Stainless steel shaft and
Viton/ceramic seal.
7m hydraulic fold - 15 fish tail air shear spray outlets.
TANK
12m hydraulic fold - 18 fish tail air shear spray outlets.
Each arm can be independently folded for turning at
row end, 640 mm height adjustment to boom with
hydraulic ram, safety break away action.
NOZZLES
P55DS: 550mm dia. turbine fan, 3700 rpm.
Air speed 170 m/s, 610 km/h. Air volume 14000 m3h.
Power consumed 50 kw / 70HP.
Low volume fishtail or twin air shear spray outlets, spacings
and angle fully adjustable, ideal for row crops.
CONTROLS
Electric 3 section valves with on/off, in cab control box
and manual pressure adjustment.
FAN SIZES
TRANSMISSION
FRAME
AGITATION
FILTRATION
PTO
DRIVESHAFT
HP REQUIRED
L (mm)
GTMP55N07
(WHEN FOLDED) 5400
MODEL DESCRIPTION
600L P55DS LINKAGE AIRBOOM SPRAYER: P55DS fan, 7m hydraulic fold Airboom,
fish tail air shear spray outlets
600L P55DS LINKAGE AIRBOOM SPRAYER: P55DS fan, 12m hydraulic fold Airboom,
fish tail air shear spray outlets
Multiplication type through multi-grip, multi-vee belt
and pulley, over-run free wheeling hub
Polytuff impact resistant polyethylene construction,
calibrated sight line, non-spill lids, hydro chemical
mixer in larger basket, lids with basket strainers,
separate in-built 18L fresh water hand wash tank.
Galvanised RHS steel construction, cat II lift pins with
two positions.
Bypass and pneumatic.
Lid Strainer and suction line strainer and nozzles
Quality Bondioli & Pavesi driveshaft with quick release
pins & safety cover.
Minimum 70 PTO HP
W (mm)
H (mm)
Kg (dry)
1700
1500
400
CODE
GTMP55N07
GTMP55N12
FACTORY OPTIONS
CODE
Bravo 180S automatic rate controller
GT-24
1300 745 826
www.silvan.com.au
25
Trailed P50E 1500/2000L Turbomiser
See page 28
Pictured: 2000L with
optional Vineyard head
MODEL SPECIFICATIONS
PUMP
FAN SIZE
NOZZLES
GEARBOX
CONTROLS
TANK
CD32 centrifugal pump, 140L/min., constructed
from toughened nylon. Stainless steel shaft and
viton/ceramic seal.
P50E: 500mm dia. turbine fan, 4000 rpm. Air speed 175
m/s, 640 km/h. Air volume 7550 m3h.
Power consumed 40 kw / 55HP.
Air shear.
Multiplication type through multi-grip, multi-vee belt and
pulley, over-run free wheeling hub.
Two sided electric on/off control with pressure
regulation operated from control box mounted in cabin.
Rotary plate distribution regulators with 15 settings.
Large 100 mm pressure gauge.
1500/2000 - Polytuff impact resistant polyethylene
construction, calibrated sight line, large non-spill flip top
lid, built-in chemical mixer and 40L fresh water tank.
FRAME
Galvanised steel chassis, adjustable drawbar with jockey
wheel.
Pump bypass plus venturi agitator.
Lid strainer and large capacity suction filter.
Glideflex suspension axle, 2 x 15” tubeless tyres on
galvanised rims (max speed rating 30 km/h).
Quality Bondioli & Pavesi driveshaft with quick release
pins & safety cover.
Minimum 55 PTO HP.
AGITATION
FILTRATION
WHEEL
EQUIPMENT
PTO
DRIVESHAFT
HP REQUIRED
DIMENSIONS
L (mm)
GTM15P-P50N
3860
(LESS HEAD)
GTM20P-P50NGL
3970
(LESS HEAD)
W (mm)
H (mm)
Kg (dry)
1500
1350
550
1540
1350
650
Length measured with drawbar in shortest position
MODEL DESCRIPTION
1500L P50E TRAILED TURBOMISER: P50E fan, glideflex axle, wide angle PTO. shaft (Spray head not incl.)
CODE
GTM15P-P50NGL
2000L P50E TRAILED TURBOMISER: P50E fan, glideflex axle, wide angle PTO. shaft (Spray head not incl.)
GTM20P-P50NGL
FACTORY OPTIONS
CODE
Vineyard/skiprow 4 head (2 cannons, 4 diffusers)
GT55-11
Orchard head
GT55-12
Bravo 180S automatic rate controller
GT-24
Hypro hydraulic drive pump
GT55-24
11.00 x 16” multi-rib tyres
D99-52
When ordering hydraulic drive pumps, tractor hydraulic capacity and system must be written on order. Note: Not all options will fit all models.
Extra charges may apply to fitment of some options. Sprayer depicted with optional sprayhead.
26
1300 745 826
www.silvan.com.au
Trailed P55DS 2000L Turbomiser
See page 28
Pictured: 2000L with
optional Turbo Tower
MODEL
MODELSPECIFICATIONS
SPECIFICATIONS
CD32 centrifugal pump, 140L/min constructed
from toughened nylon. Stainless steel shaft and
PUMP
viton/ceramic seal.
P55DS: 550mm dia. turbine fan, 3700 rpm.
Air speed 170 m/s, 610 km/h. Air volume
FAN SIZE
14000 m3h. Power consumed 50 kw / 70HP.
Air shear.
NOZZLES
Multiplication type through multi-grip, multi-vee belt and
GEARBOX
pulley, over-run free wheeling hub & oil bath fan housing.
Two sided electric on/off control with pressure regulation
operated from control box mounted in cabin. Rotary
CONTROLS
plate distribution regulators with 15 settings. Large
100mm pressure gauge.
Galvanised steel chassis, adjustable drawbar with
FRAME
jockey wheel.
TANK
Polytuff impact resistant polyethylene construction,
calibrated sight line, large non-spill flip top lid, built-in
Chemical mixer and 40L fresh water hand wash tank.
AGITATION
Pump bypass plus venturi agitator.
FILTRATION
WHEEL
EQUIPMENT
PTO
DRIVESHAFT
HP REQUIRED
Lid strainer and large capacity suction filter.
DIMENSIONS
L (mm)
Glideflex suspension axle, 2 x 15” tubeless tyres on
galvanised rims (max speed rating 30 km/h).
Quality Bondioli & Pavesi driveshaft with quick release
pins & safety cover.
Minimum 70 PTO HP.
W (mm)
H (mm)
Kg (dry)
1540
1350
650
GTM20P-P55DSGL 3970
(LESS HEAD)
Length measured with drawbar in shortest position
MODEL DESCRIPTION
CODE
2000L P55DS TRAILED TURBOMISER: P55DS fan, glideflex axle, wide angle PTO shaft (spray head not included)
2000L P55DS TRAILED TURBOMISER: P55DS fan, glideflex axle, wide angle PTO shaft, automatic rate controller,
Hypro hydraulic pump (spray head not included)
FACTORY OPTIONS
GTM20P-P55DSGL
GTM20P-P55DSGHLP
CODE
Vineyard head - 4 head (4x5)
GT55D-40
Hi Lo Orchard Head (4 outlets)
GT55D-6
Turbo Tower head (6 outlets)
GT55D-7
Orchard Cannon head
GT55-13
Bravo 180S automatic rate controller
GT-24
Hypro hydraulic pump drive
GT55-24
11.00 x 16” multi-rib tyres
D99-52
Tandem suspension axle
D99-76
When ordering hydraulic drive pumps, tractor hydraulic capacity and system must be written on order. Note: Not all options will fit all models. Extra charges may apply to
fitment of some options. Sprayer depicted with optional sprayhead.
1300 745 826
www.silvan.com.au
27
Turbomiser Heads
Skip row option
VINEYARD HEAD / P50-P55DS
Specifically designed for spraying
trellis trained crops targeting the
crop from both the top and bottom
via multi-directional spray heads
i.e. height, tilt, angle, etc.
BANANA HEAD / P55DS
Suited to the largest Turbomiser.
Designed for spraying banana crops,
the spray tower includes four air
shear fishtail outlets for above and
below canopy penetration.
28
ORCHARD HEAD / P50
ORCHARD CANNON / P55DS
TURBO TOWER / P55DS
Designed for double sided
applications, the orchard head
utilises two multi directional air
shear spray heads for effective
coverage in orchards with low
canopies such as apples & cherries
Suited to the largest Turbomiser fan,
the Orchard Cannon utilises double
sided orchard heads with two
cannons per side for effective
coverage in medium to tall tree crops
like citrus, macadamia & olives
Suited to the largest Turbomiser
fan, the tower utilises six
multidirectional spray heads to
ensure accurate and complete
coverage of tall tree crops.
HI LO ORCHARD HEAD / P55DS
SUPER CANNON / P42-P45
SUPER CANNON / P50-P55DS
Designed for tree crops. The spray
tower includes four air shear fishtail
outlets providing an air stream top
and bottom that converges in the
middle for a full canopy coverage.
Designed for single side
applications to ground crops and
vegetables via multi-directional
sprayheads i.e. height, tilt, angle,
etc. (left and right).
Designed for single side
applications to ground crops and
vegetables via multi-directional
sprayheads i.e. height, tilt, angle,
etc. (left and right).
1300 745 826
www.silvan.com.au
With improved performance from multiple spray outlets
and precise control, Silvan’s over row sprayers are the
next generation in vineyard spraying.
1300 745 826
www.silvan.com.au
Over Row
Sprayers
29
Trailed TGS Vineyard Sprayer
Pictured: 2 Row 2000L TGS
MODEL
MODEL SPECIFICATIONS
SPECIFICATIONS
HEAD
Multi row spraying head with air assist diffusers and
twin spray nozzles. Each air diffuser features swivel
adjustment and air deflector. Poly air tubes shaped to
surround canopy. Left and right arms have independent
hydraulic fold with manual width and height adjustment
(2 sets of tractor remotes required).
PUMP
Silvan oil-backed diaphragm type with nitrile diaphragms
and corrosion resistant, cast anodised aluminium body
with brass heads and manifolds.
IDS1701: 161L/min. capacity 5000kPa pressure.
FAN SIZE
450mm turbine fan, power consumed 35 kw (47HP)
NOZZLES
Twin hollow cone ceramic nozzles per outlet with
individual on/off non-drip taps
GEARBOX
2-speed with neutral position, oil-bath type
CONTROLS
40 Bar electric section valves, master valve, electric
pressure regulator and in cab controls
TANK
Polytuff impact resistant polyethylene construction,
calibrated sight line, flip top easy open lid, 50mm camlock
bottom fill and 40L fresh water hand wash tank
MODEL DESCRIPTION
FRAME
CHEMICAL
INDUCTION
AGITATION
Galvanised steel chassis, adjustable drawbar & jockey wheel
Suction probe with detachable hose.
Pump bypass plus venturi agitator
PRESSURE GAUGE 0-60 bar glycerine filled gauge fitted to pump
Lid strainer and suction line strainer
FILTRATION
WHEEL EQUIP.
Tandem simplicity suspension with 10 x 15” wheels & tyres
PTO DRIVESHAFT
Quality Bondioli & Pavesi constant velocity (wide angle)
driveshaft with quick release pins & safety cover
HP REQUIRED
Minimum 75 PTO HP
DIMENSIONS
L (mm)
W (mm)
less head 1800
folded
2600
less head 1800
5075
D35TGS-1712R
folded
2800
Length measured with drawbar in shortest position
D20TGS-1712R
4300
DTG33NM5S3
2 ROW 3500L TGS: IDS1701 pump, electric on/off
DTG33NF5S2
2 ROW 2000L TGS: IDS1701 pump, electric on/off
DTG23NF5S2
3300
980
3300
1020
CODE
500mm twin fan
D99-153
IDS2600 Pump
D99-149
Bravo 180S automatic rate controller
D99-143
Vertical lift head assembly (1 extra set of tractor remotes required)
Quick turning hitch
Rear galvanised snorkel
TGS-LIFT
D99-170
D99-169
Twin galvanised snorkel
D99-172
Hydraulic row width adjustment
30
Kg (dry)
CODE
3 ROW 3500L TGS: IDS1701 pump, electric on/off
FACTORY OPTIONS
H (mm)
-
1300 745 826
www.silvan.com.au
3000L TGS Vineyard Sprayer
Pictured: 2 Row 3000L TGS with
optional twin galvanised snorkel
MODEL SPECIFICATIONS
HEAD
PUMP
FAN SIZE
NOZZLES
Multi row spraying head with air assist diffusers and twin
spray nozzles. Each air diffuser features swivel adjustment
and air deflector. Poly air tubes shaped to surround canopy.
Left and right arms have independent hydraulic fold with
manual width and height adjustment
(2 sets of tractor remotes required).
Silvan oil-backed diaphragm type with nitrile
diaphragms with brass heads and manifolds.
IDS2001: 182L/min. capacity 5000kPa pressure.
500mm twin impeller turbine fan, power
consumed 48 kw (64HP).
Twin hollow cone ceramic nozzles per outlet with
individual metering on/off non-drip taps.
GEARBOX
2-speed with neutral position, oil-bath type.
CONTROLS
40 Bar electric section valves, master valve, electric
pressure regulator and in cab controls
3400L Polytuff impact resistant polyethylene construction,
calibrated sightline, flip top lid,
50mm camlock bottom fill.
MAIN TANK
FLUSH TANK
205L polytuff tank with top fill. Used to flush pump,
filter, spray lines and nozzles.
MODEL DESCRIPTION
HAND WASH
TANK
CHEMICAL
INDUCTION
15L polytuff tank with top fill.
Venturi suction probe.
FRAME
Galvanised steel chassis, heavy duty stand and
adjustable drawbar.
AGITATION
PRESSURE
GAUGE
FILTRATION
WHEEL
EQUIPMENT
PTO
DRIVESHAFT
HP REQUIRED
Pump bypass plus venturi agitator.
DIMENSIONS
L (mm)
Glycerine filled gauge located on the valve bank.
Suction line filter and pressure filter.
Tandem independent suspension with 10 x 15” tyres.
Quality Bondioli & Pavesi constant velocity (wide angle)
driveshaft with quick release pins & safety cover.
Minimum 75 PTO HP
W (mm)
Kg (dry)
1500
CODE
3 ROW 3000L TGS: IDS2001 pump, electric on/off
TG64NM5I3
2 ROW 3000L TGS: IDS2001 pump, electric on/off
TG64NF5I2
FACTORY OPTIONS
CODE
IDS2600 Pump
D99-149
Bravo 180S automatic rate controller
D99-143
Vertical lift head assembly (1 extra set of tractor remotes required)
TGS-LIFT
Quick turning hitch
D99-170
Twin galvanised snorkel
D99-172
Hydraulic row width adjustment
-
Road kit
D99-151
Over row work lights
D99-152
1300 745 826
H (mm)
less head 1755
3995
3300
TG64NF512
folded 2470
Length measured with drawbar in shortest position
www.silvan.com.au
31
Trailed G2 TGS Vineyard Sprayer
Pictured: 3 Row 4000L G2 TGS
MODEL SPECIFICATIONS
SPECIFICATIONS
MODEL
HEAD
PUMP
Multi row spraying head with air assist diffusers and twin
spray nozzles. Each air diffuser features swivel adjustment
and air deflector. Poly air tubes shaped to surround canopy.
Left and right arms have independent hydraulic fold with
manual width and height adjustment.
(2 sets of tractor remotes required)
Silvan oil-backed diaphragm type with nitrile diaphragms
with brass heads and manifolds.
IDS1701: 161L/min. capacity 5000kPa pressure.
IDS2001: 182L/min. capacity 5000kPa pressure.
FAN SIZE
500mm twin impeller turbine fan, power consumed
48 kw (64HP)
NOZZLES
Twin hollow cone ceramic nozzles per outlet with
individual metering on/off non-drip taps
GEARBOX
2-speed with neutral position, oil-bath type
CONTROLS
40 Bar electric section valves, master valve, electric
pressure regulator and in cab controls
MAIN TANK
Polytuff impact resistant polyethylene construction with
LED tank level indicator and 50mm camlock top and
bottom fill.
FLUSH TANK
Polytuff tank with top fill. Used to flush pump, filter, spray
lines and outlets.
HAND WASH
TANK
Polytuff tank filled through cap. Tap located next to
chemical mixer tank drawer.
MIXER TANK
Chemical mixer drawer with tap controls for rinse, venturi
and main tank rinse. Venturi transfer back to main tank.
FRAME
AGITATION
PRESSURE
GAUGE
FILTRATION
WHEEL
EQUIPMENT
PTO
DRIVESHAFT
HP REQUIRED
Galvanised steel chassis, adjustable drawbar & heavy duty stand
DIMENSIONS
L (mm)
Pump bypass and twin venturi agitators
Glycerine filled gauge located on the valve bank
Suction line filter and pressure filter
2000L: Tandem simplicity suspension with 10 x 15” tyres
4000L: Tandem simplicity suspension with 11.5 x 15.3” tyres
Quality Bondioli & Pavesi constant velocity (wide angle)
driveshaft with quick release pins & safety cover
Minimum 75 PTO HP
4000L
5100
2000L
4840
W (mm)
less head
folded
less head
folded
TG44NM6S3
2 ROW 4000L G2 TGS: IDS2001 pump, electric on/off
TG44NF6S2
2 ROW 2000L G2 TGS: IDS1701 pump, electric on/off
TG23NF5S2
FACTORY OPTIONS
3300
2000
3300
1800
CODE
D99-149
Bravo 180S automatic rate controller
D99-143
Vertical lift head assembly (1 extra set of tractor remotes required)
TGS-LIFT
Quick turning hitch
Twin galvanised snorkel
D99-170
D99-172
Hydraulic row width adjustment
Road kit
Over row work lights
Kg(dry)
CODE
3 ROW 4000L G2 TGS: IDS2001 pump, electric on/off
IDS2600 Pump
H (mm)
Length measured with drawbar in shortest position
MODEL DESCRIPTION
32
1950
2600
1820
2600
D99-151
D99-152
1300 745 826
www.silvan.com.au
Turbowrap & Tri Wrap Turbomiser
Pictured: 3500L Tri-Wrap
MODELSPECIFICATIONS
SPECIFICATIONS
MODEL
HEAD
Two row spraying head: 28 venturi air shear adjustable
nozzles with individual metering and on/off taps.
Three row spraying head: 42 venturi air shear adjustable
nozzles with individual metering and on/off taps. Left
& right arms are independent hydraulic folding with
adjustable width & centre frame. Boom frame is galvanised.
PUMP
Hypro stainless steel, hydraulic drive centrifugal pump,
350 L/min. Stainless steel shaft and Viton/ceramic seal.
FAN SIZE
P55DSE: 550mm dia. turbine fan, 3700 rpm. Air speed 170
m/s, 610 km/h. Air volume 14000 m3h.
Power consumed 50 kw / 67HP.
NOZZLES
Air shear.
GEARBOX
Multiplication type through multi-grip, multi-vee belt and
pulley, over-run free wheeling hub and oil bath fan housing.
CONTROLS
Electric section valves with Bravo 180S automatic
rate controller. Large 100mm pressure gauge.
TANK
Polytuff impact resistant polyethylene construction,
calibrated sight line, flip top easy open lid, 50mm camlock
bottom fill and 40L fresh water tank
FRAME
Galvanised steel chassis, adjustable drawbar with
jockey wheel.
AGITATION
Pump bypass plus venturi agitator.
FILTRATION
Lid strainer and large capacity suction filter.
WHEEL
EQUIPMENT
Tandem simplicity suspension with 10 x 15” tyres
PTO
DRIVESHAFT
Quality Bondioli & Pavesi constant velocity (wide angle)
driveshaft with quick release pins & safety cover
HP REQUIRED 70 PTO HP (2 row), 90 PTO HP (3 row)
DIMENSIONS L (mm)
2000L unit
4600
3500L unit
4975
W (mm)
less head 1800
folded
2600
less head 1800
folded
2800
H (mm)
Kg (dry)
3300
990
3300
1100
Length measured with drawbar in shortest position
MODEL DESCRIPTION
CODE
2000L P55DSE TRAILED 2 ROW TURBOWRAP: Includes sprayheads P55DSE fan, Hypro hydraulic drive
stainless steel pump, automatic spray rate controller, wide angle shaft, tandem suspension axle
GTU28CB5S2
3500L P55DSE TRAILED 2 ROW TURBOWRAP: Includes sprayheads P55DSE fan, Hypro hydraulic drive
stainless steel pump, automatic spray rate controller, wide angle shaft, tandem suspension axle
GTU38CB5S2
2000L P55DSE TRAILED 3 ROW TRI-WRAP: Includes sprayheads P55DSE fan, Hypro hydraulic drive
stainless steel pump, automatic spray rate controller, wide angle shaft, tandem suspension axle
3500L P55DSE TRAILED 3 ROW TRI-WRAP: Includes sprayheads P55DSE fan, Hypro hydraulic drive
stainless steel pump, automatic spray rate controller, wide angle shaft, tandem suspension axle
GTU28CB5S3
GTU38CB5S3
FACTORY OPTIONS
CODE
Quick turning hitch
D99-170
Hydraulic row width/height adjustment
-
Bravo 300S RCU spray rate controller
J99-180
When ordering hydraulic drive pumps, tractor hydraulic capacity and system must be written on order. Note: Not all options will fit all models.
Extra charges may apply to fitment of some options.
1300 745 826
www.silvan.com.au
33
G2 Turbowrap & Tri Wrap Turbomiser
Pictured: 4000L G2 Tri Wrap
MODEL SPECIFICATIONS
SPECIFICATIONS
MODEL
HEAD
PUMP
FAN SIZE
NOZZLES
GEARBOX
CONTROLS
MAIN TANK
FLUSH TANK
HAND WASH
TANK
Two row spraying head: 28 venturi air shear nozzles with
individual metering and on/off taps. Three row spraying
head: 42 venturi air shear adjustable nozzles with
individual metering and on/off taps. Left & right arms have
independent hydraulic folding with adjustable width &
centre frame. Boom frame is fully galvanised.
Hypro stainless steel, hydraulic drive centrifugal pump,
350 L/min. Stainless steel shaft and Viton/ceramic seal.
500mm Dm. twin impeller turbine fan.
Power consumed 48 kw (64HP).
Air shear.
2-speed with neutral position, oil-bath type
Electric section valves with Bravo 180S automatic rate
controller. Large 100mm pressure gauge.
Polytuff impact resistant polyethylene construction with LED
tank level indicator and 50mm camlock top and bottom fill.
Polytuff tank with top fill. Used to flush pump, filter, spray
lines and nozzles.
Polytuff tank filled through cap. Tap located next to
Chemical mixer tank drawer.
Chemical mixer drawer with tap controls for rinse, venturi
and main tank rinse. Venturi transfer to main tank.
Galvanised steel chassis, adjustable drawbar & heavy duty
FRAME
stand.
Pump bypass and twin venturi agitators.
AGITATION
PRESSURE GAUGE Glycerine filled gauge located on valve bank.
Suction line filter and pressure filter.
FILTRATION
2000L: Tandem simplicity suspension with 10 x 15” tyres
WHEEL
4000L: Tandem simplicity suspension with 11.5 x 15.3” tyres
EQUIPMENT
Quality Bondioli & Pavesi constant velocity (wide angle)
PTO
driveshaft with quick release pins & safety cover
DRIVESHAFT
75 PTO HP (2 row Turbowrap), 90 PTO HP (3 row Tri-Wrap)
HP REQUIRED
L (mm)
W (mm)
H (mm)
KG (dry)
DIMENSIONS
less head 1820
5205
3300
1800
2000L
folded 2600
less head 1950
5730
3300
2000
4000L
folded 2800
MIXER TANK
Length measured with drawbar in shortest position
MODEL DESCRIPTION
CODE
4000L G2 TRAILED TURBOWRAP - 2 ROW: Includes sprayheads, twin fan, Hypro hydraulic stainless steel pump,
automatic rate controller, wide angle shaft, tandem suspension axle
TU48NB6S2
2000L G2 TRAILED TURBOWRAP - 2 ROW: Includes sprayheads, twin fan, Hypro hydraulic stainless steel pump,
automatic rate controller, wide angle shaft, tandem suspension axle
TU28NB5S2
4000L G2 TRAILED TRI-WRAP - 3 ROW: Includes sprayheads, twin fan, Hypro hydraulic stainless steel pump,
automatic spray rate controller, wide angle shaft, tandem suspension axle
TU48NB6S3
2000L G2 TRAILED TRI-WRAP - 3 ROW: Includes sprayheads, twin fan, Hypro hydraulic stainless steel pump,
automatic rate controller, wide angle shaft, tandem suspension axle
TU28NB5S3
FACTORY OPTION
CODE
Quick turning hitch
D99-170
Hydraulic row width/height adjustment
Bravo 300S RCU spray rate controller
J99-180
Twin galvanised snorkel
D99-172
Road kit
D99-151
Over row work lights
D99-152
When ordering hydraulic drive pumps, tractor hydraulic capacity and system must be written on order. Note: Not all options will fit all models. Extra charges
may apply to fitment of some options.
34
1300 745 826
www.silvan.com.au
3000L Turbowrap & Tri Wrap Turbomiser
Pictured: 3000L Tri Wrap
MODEL SPECIFICATIONS
HEAD
PUMP
FAN SIZE
NOZZLES
GEARBOX
CONTROLS
MAIN TANK
FLUSH TANK
Two row spraying head: 28 venturi air shear nozzles
with individual metering and on/off taps. Three row
spraying head: 42 venturi air shear adjustable nozzles
with individual metering and on/off taps. Left & right
arms have independent hydraulic folding with adjustable
width & centre frame. Boom frame is fully galvanised.
Hypro hydraulic centrifugal pump, 350 L/min. Stainless
steel shaft and Viton/ceramic seal.
500mm Dm. twin impeller turbine fan.
Power consumed 48 kw (64HP).
Air shear.
2-speed with neutral position, oil-bath type
Electric section valves with Bravo 180S automatic
rate controller. Large 100mm pressure gauge.
3400L Polytuff impact resistant polyethylene
construction, calibrated sightline, flip top lid,
50mm camlock bottom fill.
205L polytuff tank with top fill. Used to flush pump,
filter, spray lines and nozzles.
HAND WASH TANK 15L polytuff tank with top fill.
CHEMICAL
Venturi suction probe.
INDUCTION
Galvanised steel chassis, heavy duty stand & adjustable
drawbar.
Pump bypass plus venturi agitator.
AGITATION
PRESSURE GAUGE Glycerine filled gauge located on the valve bank.
Suction line filter and pressure filter.
FILTRATION
FRAME
WHEEL
EQUIPMENT
PTO DRIVESHAFT
HP REQUIRED
DIMENSIONS
TU48NB6S2
Tandem independent suspension with 10 x 15” tyres.
Quality Bondioli & Pavesi constant velocity (wide angle)
driveshaft with quick release pins & safety cover.
Minimum 75 PTO HP
L (mm)
W (mm)
H (mm)
3995
less head 1755
folded 2470
3300
Kg (dry)
1500
Length measured with drawbar in shortest position
MODEL DESCRIPTION
CODE
3000L TRAILED TURBOWRAP - 2 ROW: Includes sprayheads, twin fan, Hypro hydraulic pump, automatic rate
controller, wide angle shaft, tandem suspension axle
3000L TRAILED TRI WRAP - 3 ROW: Includes sprayheads, twin fan, Hypro hydraulic pump, automatic rate controller,
wide angle shaft, tandem suspension axle
FACTORY OPTION
TU68NB5I2
TU68NB5I3
CODE
Quick turning hitch
D99-170
Hydraulic row width/height adjustment
Bravo 300S RCU spray rate controller
J99-180
Twin galvanised snorkel
D99-172
Road kit
D99-151
Over row work lights
D99-152
When ordering hydraulic drive pumps, tractor hydraulic capacity and system must be written on order. Note: Not all options will fit all models. Extra charges
may apply to fitment of some options.
1300 745 826
www.silvan.com.au
35
Linkage
Sprayers
36
Silvan linkage sprayers can be tailored to suit herbicide
and fungicide applications in a range of crops including
orchards, vineyards, sugar cane and pasture production.
They are ideal for the management and long-term control
of troublesome pests that can reduce productivity.
1300 745 826
www.silvan.com.au
Econopak - Linkage Sprayer
Pictured: 400L with 6m Econopak boom
MODEL
MODELSPECIFICATIONS
SPECIFICATIONS
PUMP
BOOM
NOZZLES
CONTROLS
TANK
Silvan self-priming oil-backed diaphragm type with
nitrile diaphragms and corrosion resistant, cast
anodised aluminium body.
BP60/20: 58 L/min. capacity 2000kPa pressure
Econopak boom: 6m with stainless steel spray lines,
non-drip nozzle holders, fully galvanised frame and
spring loaded safety break back/forward.
Air induction nozzles with strainer in bayonet fit nondrip nozzle holders at 50cm spacings.
3 outlet manual control valve with pressure regulator.
Mounted forward for easy access.
Polytuff impact resistant polyethylene construction,
mouldedL calibrations and non-spill screw-down lid
with single breather.
FRAME
AGITATION
PRESSURE GAUGE
FILTRATION
HOSE REEL
PTO DRIVESHAFT
Quality driveshaft with quick release pins & safety cover.
DIMENSIONS
L (mm)
W (mm)
H (mm)
Kg (dry)
KBC300
(WITH BOOM)
1105
2067
1070
116
KBC400
(WITH BOOM)
1105
2067
1310
121
MODEL DESCRIPTION
300L ECONOPAK LINKAGE SPRAYER: BP60/20, reel, hose & gun, 6m Econopak boom
400L ECONOPAK LINKAGE SPRAYER: BP60/20, reel, hose & gun, 6m Econopak boom
OPTIONS
14L foam marker (single side)
Note: Boom and hose reel are fully assembled.
1300 745 826
www.silvan.com.au
Fully galvanised steel, cat I & II linkage.
Bypass agitation.
0-25 Bar dual stage glycerine filled gauge.
Lid strainer, suction line strainer and nozzle strainers.
Fitted with rear-mounted Eco hosereel, 30m of 10mm
hose and Spotjet spraygun with adjustable spray nozzle.
CODE
KBC300
KBC400
CODE
K99-31
37
Pasturepak - Linkage Sprayer
Pictured: 600L Pasturepak with 6m boom
MODEL
MODELSPECIFICATIONS
SPECIFICATIONS
PUMP
BOOM
NOZZLES
CONTROLS
TANK
FRAME
Silvan self-priming oil-backed diaphragm type with
nitrile diaphragms and corrosion resistant, cast anodised
aluminium body with raised pump mount.
BP60/20: 58 L/min. capacity 2000kPa pressure
BP75/15: 71 L/min. capacity 1500kPa pressure
Field boom: 6m or 8m with stainless steel spray lines,
non-drip nozzle holders, fully galvanised frame, nozzle
protection and spring loaded safety break back/forward.
Air induction nozzles with strainer in bayonet fit non-drip
nozzle holders at 50cm spacings.
3 outlet manual control valve with pressure regulator.
Mounted forward for easy access.
Low profile, 400/600/800L polytuff impact resistant
polyethylene construction, external sightline with floating
ball and non-spill offset screw-down lid with single
breather. 15L fresh water tank with closed lid and easy
to handle tap. 4L toolbox with polyethylene lid
Fully galvanised steel, cat I & II linkage on 400L,
cat II linkage on 600L and 800L.
AGITATION
PRESSURE
GAUGE
FILTRATION
HOSE REEL
Bypass agitation.
0-25 Bar dual stage glycerine filled gauge.
Lid strainer, suction line strainer (with stop valve fitted
at side of tank to enable ease of filter maintenance), and
nozzle cup strainers.
Fitted with rear-mounted hosereel, including 20m of
12mm I.D. quality pressure hose and Silvan Triam 49
spraygun with convenient trigger action and spray
pattern adjustment.
Quality driveshaft with quick release pins & safety cover.
PTO DRIVESHAFT
DIMENSIONS
L (mm)
KBE400
(WITH BOOM)
KBE600
(WITH BOOM)
KBE800
(WITH BOOM)
MODEL DESCRIPTION
400L PASTUREPAK LINKAGE SPRAYER: BP60/20, reel, hose & gun, 6m Field boom
400L PASTUREPAK LINKAGE SPRAYER: BP60/20, reel, hose & gun, 8m Field boom
600L PASTUREPAK LINKAGE SPRAYER: BP60/20, reel, hose & gun, 6m Field boom
600L PASTUREPAK LINKAGE SPRAYER: BP60/20, reel, hose & gun, 8m Field boom
800L PASTUREPAK LINKAGE SPRAYER: BP75/15, reel, hose & gun, 6m Field boom
800L PASTUREPAK LINKAGE SPRAYER: BP75/15, reel, hose & gun, 8m Field boom
W (mm)
H (mm)
Kg (dry)
1050
2067
1200
150
1350
2067
1300
180
1460
2067
1315
210
CODE
KBE400
KBF400
KBE600
KBF600
KBE800
KBF800
ASSEMBLY CHARGES APPLY
OPTIONS*
14L foam marker (single side)
*Note: Not all options will fit all models. Extra charges may apply to fitment of some options.
38
CODE
K99-31
1300 745 826
www.silvan.com.au
Super 400/600L - Linkage Sprayer
46
50
Pictured: 600L with BP60/20 pump
MODEL SPECIFICATIONS
PUMP
MODEL DESCRIPTION
Silvan self-priming oil-backed diaphragm
type with nitrile diaphragms and corrosion
resistant, cast anodised aluminium body with
raised pump mount.
BP60/20: 58L/min. capacity 2000kPa pressure
BP125/20: 121L/min. capacity 2000kPa pressure
CONTROLS
3 outlet manual control valve with
pressure regulator.
TANK
Low profile, 400 and 600L Polytuff impact
resistant polyethylene construction, external
sightline with floating ball and non-spill offset
screw-down lid with single breather. 15L
freshwater tank with screw-down lid and on/
off tap. 4L toolbox with polythylene lid.
FRAME
Galvanised steel with adjustable cat I & II
hitch on 400L and cat II hitch on 600L to suit
a wider range of TPL mounting points. Vertical
boom channel for positioning the boom at the
optimum spray height
AGITATION
Bypass agitation.
PRESSURE GAUGE
0-25 Bar dual stage glycerine filled gauge.
FILTRATION
Lid strainer, suction line strainer with stop
valve fitted at the side of the tank to enable
ease of filter maintenance.
PTO DRIVESHAFT
Quality driveshaft with quick release pins &
safety cover.
DIMENSIONS
L (mm)
W (mm)
H (mm)
Kg (dry)
K04N-60 (LESS BOOM) 930
1020
1200
K06N-60 (LESS BOOM) 1025
1150
K08N-75 (LESS BOOM) 1135
1335
1300 745 826
CODE
400L LINKAGE: BP60/20 pump, no boom
K04N-60
400L LINKAGE: BP125/20 pump, no boom
K04N-105
600L LINKAGE: BP60/20 pump, no boom
K06N-60
600L LINKAGE: BP125/20 pump, no boom
FACTORY OPTIONS*
K06N-105
6m Field boom
8m Field boom
10m Field boom
6m Devil boom with hydraulic fold
8m Devil boom with hydraulic fold
10m Devil boom with hydraulic fold
Hydraulic lift, galvanised single hydraulic system 6, 8 & 10m devil booms
8 Jet vine boom
10 Jet vine boom
Olive boom (Used with BP125/20 pump only)
Undervine and mid row boom
70L flush tank kit to flush the filter, spraylines
and nozzles (600 only)
14L foam marker (single side)
30L Paddock marker foam marker
Economy hosereel, 20m hose
(10mm ID) with Triam spraygun
Electric on/off control 3 section
CODE
032-044-6
032-044-8
032-044-10
032-19D
032-25D
032-32D
032-19DL
032-G
032-H
032-R
032-HERB
K99-47
K99-31
042U-2
180E02012CT
K99-34
90
Electric control 3 section with in cab pressure
adjustment
K99-29
1300
105
Bravo 180S automatic rate controller
J99-151
1315
145
Note: Not all options will fit all models. Extra charges may apply to fitment
www.silvan.com.au
39
Super 800/1100L - Linkage Sprayer
Pictured: 1100L
with BP125/20 pump
and optional flush tank
Pictured: 800L
with BP125/20 pump
MODEL SPECIFICATIONS
Silvan self-priming oil-backed diaphragm type
with nitrile diaphragms and corrosion resistant,
cast anodised aluminium body with raised
PUMP
pump mount.
BP75/15: 71L/min. capacity 1500kPa pressure
BP125/20: 121L/min. capacity 2000kPa pressure
3 outlet manual control valve with
CONTROLS
pressure regulator.
Low profile, 800 and 1100L Polytuff impact
resistant polyethylene construction, external
sightline with floating ball and non-spill offset
screw-down lid with single breather. 15L
TANK
freshwater tank with screw-down lid and on/off
tap. 4L toolbox with polythylene lid.
50mm Camlock bottom fill (1100L only)
Galvanised steel,with adjustable cat II hitch
to suit a wider range of TPL mounting points.
FRAME
Vertical boom channel for positioning the boom
at the optimum spray height
Bypass agitation.
AGITATION
Venturi suction probe with detachable hose
CHEMICAL
(1100L only).
INDUCTION
0-25 Bar dual stage glycerine filled gauge.
PRESSURE GAUGE
Lid strainer, suction line strainer with stop valve
fitted at the side of the tank to enable ease of
FILTRATION
filter maintenance.
Quality driveshaft with quick release pins &
PTO DRIVESHAFT
safety cover.
L (mm) W (mm) H (mm)
KG (dry)
DIMENSIONS
1395
1315
145
K08N-75 (LESS BOOM) 1350
1395
1610
160
K11NH-75 (LESS BOOM) 1350
46
50
MODEL DESCRIPTION
800L LINKAGE: BP75/15 pump, no boom
800L LINKAGE: BP125/20 pump, no boom
1100L LINKAGE: BP75/15 pump, no boom
1100L LINKAGE: BP125/20 pump, no boom
FACTORY OPTIONS*
CODE
K08N-75
K08N-125
K11NH-75
K11NH-125
CODE
6m Field boom
8m Field boom
10m Field boom
6m Devil boom with hydraulic fold
8m Devil boom with hydraulic fold
10m Devil boom with hydraulic fold
12m Devil boom with hydraulic fold**
14m Devil boom with hydraulic fold**
15m Devil boom with hydraulic fold**
Hydraulic lift, galvanised single hydraulic system 6, 8 & 10m devil booms
Hydraulic lift, galvanised single hydraulic system 12, 14 & 15m devil booms
8 Jet vine boom
10 Jet vine boom
Olive boom (Use with BP125/20 pump only)
Undervine and mid row boom
70L flush tank kit to flush the filter,
spraylines and nozzles
14L foam marker (single side)
30L Paddock marker foam marker
Economy hosereel, 20m hose (10mm ID) with
Triam spraygun
Electric on/off control 3 section
032-044-6
032-044-8
032-044-10
032-19D
032-25D
032-32D
032-40D
032-48D
032-50D
032-19DL
032-40DL
032-G
032-H
032-R
032-HERB
K99-47
K99-31
042U-2
180E02012CT
K99-34
Electric control 3 section with in cab pressure
adjustment
K99-29
Bravo 180S automatic rate controller
J99-151
Silmix chemical hopper
K99-21
Note: Not all options will fit all models. Extra charges may apply to fitment
** If fitting 12, 14, & 15m Devil boom to a 800L TPL add $800 for heavier frame
40
1300 745 826
www.silvan.com.au
Slimline 200/300/400L - Linkage Sprayer
Pictured: 400L
with BP60/20 pump
Pictured: 300L with
BP20/15 pump
46
50
Pictured: 200L with
BP20/15 pump
MODEL SPECIFICATIONS
PUMP
CONTROLS
TANK
FRAME
AGITATION
PRESSURE
GAUGE
FILTRATION
PTO
DRIVESHAFT
DIMENSIONS
K02S-20
K03-20
K04-60
Silvan self-priming oil-backed diaphragm type with
nitrile diaphragms and corrosion resistant, cast
anodised aluminium body.
BP20/15: 20L/min. capacity 1500kPa pressure
BP60/20: 58L/min. capacity 2000kPa pressure
BP20/15: 2 outlet control valve with pressure regulation.
BP60/20: 3 outlet control valve with pressure regulation.
Polytuff impact resistant polyethylene construction,
moulded litre calibrations and non-spill screw-down lid
with single breather.
Fully galvanised steel, cat. I & II linkage.
Bypass agitation.
0-25 Bar dual stage glycerine filled gauge.
Lid strainer, suction line strainer.
Quality driveshaft with quick release pins and
safety cover.
L (mm) W (mm) H (mm)
Kg (dry)
920
1105
1105
60
70
75
1300 745 826
740
740
740
920
1070
1310
www.silvan.com.au
MODEL DESCRIPTION
200L LINKAGE SPRAYER:
BP20/15 pump, no boom
300L LINKAGE SPRAYER:
BP20/15 pump, no boom
300L LINKAGE SPRAYER:
BP60/20 pump, no boom
400L LINKAGE SPRAYER:
BP60/20 pump, no boom
DEALER FITTED OPTIONS
CODE
K02S-20
K03-20
K03-60
K04-60
CODE
6m Field boom
032-044-6
8m Field boom
032-044-8
8 Jet vine boom
10 Jet vine boom
Undervine & mid row boom
14L foam marker (single side)
032-G
032-H
032-HERB
K99-31
Economy hosereel, 30m hose (10mm ID),
180E03010C
PA spray gun & extension lance
Electric on/off control-3 valves (GOYEN solenoids)
M99-14
Note: Not all options will fit all models.
Extra charges may apply to factory fitment of some options.
41
Slimline 800/1000L - Linkage Sprayer
Pictured: 1000L unit with
BP125/20 pump and one
lever control valve
MODEL SPECIFICATIONS
PUMP
CONTROLS
TANK
Silvan self-priming oil-backed diaphragm type
with nitrile diaphragms and corrosion resistant,
cast anodised aluminium body with raised pump
mount (1000L only)
BP60/20: 58L/min. capacity 2000kPa pressure.
BP125/20: 121L/min. capacity 2000kPa pressure.
BP60/20: 3 outlet control valve with pressure
regulation. BP125/20: 1 lever, 4 outlet control
valve with pressure regulation.
Polytuff impact resistant polyethylene
construction, mouldedL calibrations and
non-spill screw-down lid with single breather.
800L model: Galvanised steel, cat. 1 & II linkage
FRAME
AGITATION
PRESSURE
GAUGE
FILTRATION
PTO
DRIVESHAFT
DIMENSIONS
K08-60
(LESS BOOM)
K10-60
(LESS BOOM)
46
1000L model: Galvanised steel with
adjustable cat II hitch system to suit a wider
range of TPL mounting points. Vertical boom
channel for positioning the boom
at the optimum spray height
Bypass agitation.
0-25 Bar dual stage glycerine filled gauge.
Lid strainer, suction line strainer.
Quality driveshaft with quick release pins &
safety cover.
L (mm)
W (mm)
H (mm)
Kg (dry)
1330
980
1370
120
1650
50
1250
1370
170
MODEL DESCRIPTION
800L LINKAGE
CODE
BP60/20 pump, no boom
K08-60
800L LINKAGE
BP125/20 pump, no boom
K08-105
1000L LINKAGE
BP60/20 pump, no boom
K10-60
1000L LINKAGE
K10-105
BP125/20 pump, no boom
FACTORY OPTIONS*
CODE
6m Field boom
8m Field boom
10m Field boom
6m Devil boom with hydraulic fold
8m Devil boom with hydraulic fold
032-044-6
032-044-8
032-044-10
032-19D
032-25D
10m Devil boom with hydraulic fold
032-32D
12m Devil boom with hydraulic fold**
14m Devil boom with hydraulic fold**
15m Devil boom with hydraulic fold**
Hydraulic lift, galvanised single hydraulic system 6, 8 & 10m devil booms
Hydraulic lift, galvanised single hydraulic system 12, 14 & 15m devil booms
8 Jet vine boom
032-40D
032-48D
032-50D
10 Jet vine boom
032-19DL
032-40DL
032-G
032-H
Olive boom(Used with BP125/20 pump only)
032-R
Undervine and mid row boom
70L flush tank kit to flush the filter, spraylines
and nozzles (1000L only )
14L foam marker (single side)
30L Paddock marker foam marker
Economy hosereel, 20m hose
(10mm ID) with Triam spraygun
Electric control 3 section with in cab
pressure adjustment
Bravo 180S automatic rate controller
Silmix chemical hopper
032-HERB
K99-47
K99-31
042U-2
180E02012CT
K99-29
J99-151
K99-21
Note: Not all options will fit all models. Extra charges may apply to fitment.
** If fitting 12, 14, & 15m Devil boom to a 800L TPL add $800 for heavier frame
42
1300 745 826
www.silvan.com.au
Cane Boom - Linkage Sprayer
Pictured: 1100L with
6 row cane boom
MODEL SPECIFICATIONS
PUMP
BOOM
NOZZLES
CONTROLS
TANK
FRAME
AGITATION
PRESSURE
GAUGE
FILTRATION
PTO
DRIVESHAFT
DIMENSIONS
K06N-60C
K08N-75C
K11NH-75C
Silvan self-priming oil-backed diaphragm type with
nitrile diaphragms and corrosion resistant, cast anodised
aluminium body.
BP60/20: 58 L/min. capacity 2000kPa pressure.
BP75/15: 71 L/min. capacity 1500kPa pressure.
BP125/20: 121 L/min. capacity 2000kPa pressure.
Cane boom: 4 row or 6 row. Fully galvanised
construction, to suit row widths from 1.5 - 1.8m with
500-900mm shield spray head and brush skirts. Spray
heads have heavy duty hinges to withstand drag,
parallelogram tracking system.
2 x twin nozzle bodies per spray head and
air induction nozzles.
4 outlet single lever control valve with pressure
regulation and gauge.
Low profile 600/800/1100L Polytuff impact resistant
polyethylene construction, external sightline with floating
ball and non-spill offset screw-down lid with single breather.
15L freshwater tank with screw-down lid and on/off tap. 4L
toolbox with polythylene lid. 50mm Camlock bottom fill and
venturi Chemical suction probe (1100L only).
Fully galvanised steel, cat II adjustable hitch
Bypass agitation.
0-25 Bar dual stage glycerine filled gauge.
Lid strainer and suction line strainer with stop valve fitted
at side of tank to enable ease of filter maintenance.
Quality driveshaft with quick release pins &
safety cover.
L (mm)
W (mm)
H (mm)
Kg (dry)
1025
1350
1350
1150
1395
1395
1300
1315
1610
105
145
160
1300 745 826
www.silvan.com.au
MODEL DESCRIPTION
600L LINKAGE SPRAYER
BP60/20 pump, no boom
600L LINKAGE SPRAYER
BP125/20 pump, no boom
800L LINKAGE SPRAYER
BP75/15 pump, no boom
800L LINKAGE SPRAYER
BP125/20 pump, no boom
1100L LINKAGE SPRAYER
BP75/15 pump, no boom
1100L LINKAGE SPRAYER
BP125/20 pump, no boom
BOOM OPTIONS
4 ROW CANE BOOM
6 ROW CANE BOOM
Broadacre boom attachment (To suit 4 row)
Broadacre boom attachment (To suit 6 row)
Hydraulic lift, galvanised single
hydraulic system
FACTORY OPTIONS
CODE
K06N-60C
K06N-125C
K08N-75C
K08N-125C
K11NH-75C
K11NH-125C
CODE
035-4N
035-6N
035-4B
035-6B
032-40DL
CODE
70L flush tank kit to flush the filter,
K99-47
spraylines and nozzles
Electric on/off control 4 section
K99-48
Electric control 4 section with
K99-49
in cab pressure adjustment
Electric control 5 section with
K99-50
in cab pressure adjustment
Bravo 180S automatic rate controller
J99-151
Silmix chemical hopper
K99-21
Note: Not all options will fit all models.
Extra charges may apply to fitment of some options.
43
Casotti - Linkage Sprayer
Pictured: 600L Casotti
MODEL
MODELSPECIFICATIONS
SPECIFICATIONS
PUMP
CASOTTI MOTOR
CONTROLS
TANK
FRAME
Silvan oil-backed diaphragm type with nitrile
diaphragms and corrosion resistant, cast anodised
aluminium body.
APS71: 71L/min. capacity 4000kPa pressure
An electric 12 volt motor is connected to the tractor
battery which powers the oscillating movement of the
nozzle arms. The arms swing 180º. This movement is
symmetrical to the tractor’s passage.
2 outlet brass manual control valve with pressure
regulator. Mounted forward for easy access.
Low profile 600/800/1100L Polytuff impact resistant
polyethylene construction, external sightline with
floating ball and non-spill offset screw-down lid with
single breather. 15L freshwater tank with screw-down
lid and on/off tap. 4L toolbox with polythylene lid. 50mm
Camlock bottom fill (1100L only)
Fully galvanised steel, cat II linkage.
MODEL DESCRIPTION
600L LINKAGE CASOTTI SPRAYER: APS71 pump, Casotti kit
800L LINKAGE CASOTTI SPRAYER: APS71 pump, Casotti kit
1100L LINKAGE CASOTTI SPRAYER: APS71 pump, Casotti kit
CASOTTI KIT: With mounting brackets and hydraulic hoses
44
AGITATION
Bypass agitation.
3 oscillating high pressure jets (20 bar) Up to 12ms
SPRAY JETS
spray coverage.
PRESSURE GAUGE 0-60 Bar dual stage glycerine filled gauge.
Lid strainer, suction line strainer with stop valve fitted
FILTRATION
at side of tank to enable ease of filter maintenance.
Quality driveshaft with quick release pins &
PTO DRIVESHAFT
safety cover.
DIMENSIONS
K06N-71WG
(LESS KIT)
K08N-71WG
(LESS KIT)
K11N-71WG
(LESS KIT)
L (mm)
W (mm)
H (mm)
Kg (dry)
1025
1150
1300
105
1350
1395
1315
145
1350
1395
1610
160
CODE
K06N-71WG
K08N-71WG
K11N-71WG
K99-36
1300 745 826
www.silvan.com.au
Rowmaster - Linkage Sprayer
46
50
Pictured: 1100L linkage
with 15m Rowmaster
MODEL
MODELSPECIFICATIONS
SPECIFICATIONS
PUMP
Silvan self-priming oil-backed diaphragm type with
nitrile diaphragms and corrosion resistant, cast
anodised aluminium body. BP125/20: 121 L/min.
capacity 2000kPa pressure.
BOOM
12m/15m fully galvanised truss section boom with
hydraulic vertical lift (1.2m height adjustment) and
hydraulic fold. Outer arm hydraulic breakback.
CONTROLS
3 section Silvamatic electric controls with pressure
compensating direct acting valves. On/off and
pressure adjustment in cab.
TANK
Low profile, 800 and 1100L Polytuff impact resistant
polyethylene construction, external sightline with floating
ball and non-spill offset screw-down lid with single
breather. 15L freshwater tank with screw-down lid and
on/off tap. 4L toolbox with polythylene lid.
50mm Camlock bottom fill (1100L only)
FRAME
Fully galvanised steel, cat II linkage.
NOZZLES
Air induction nozzles with strainer in bayonet fit nondrip nozzle holders at 50cm spacings.
AGITATION
Constant bypass agitation.
PRESSURE GAUGE 0-25 Bar dual stage glycerine filled gauge on control unit.
FILTRATION
PTO DRIVESHAFT
DIMENSIONS
K08N12V-125S
(LESS BOOM)
K11N12V-125S
(LESS BOOM)
MODEL DESCRIPTION
800L HYDRAULIC LINKAGE SPRAYER: BP125/20 pump, 12m hydraulic boom
800L HYDRAULIC LINKAGE SPRAYER: BP125/20 pump, 15m hydraulic boom
1100L HYDRAULIC LINKAGE SPRAYER: BP125/20 pump, 12m hydraulic boom
1100L HYDRAULIC LINKAGE SPRAYER: BP125/20 pump, 15m hydraulic boom
FACTORY OPTIONS
Fenceline nozzle kit (electric)
70L flush tank kit to flush filter, spraylines & nozzles
30L paddock foam marker
Bravo 180S automatic rate controller
Wing tilt
Electric over hydraulic solenoids (3 bank)
Electric over hydraulic solenoids (5 bank for wing tilt)
Note: Not all options will fit all models.Extra charges may apply to fitment of some options.
1300 745 826
www.silvan.com.au
Lid strainer, suction line strainer with shut-off valve for
ease of filter maintenance and nozzle cup strainers.
Quality driveshaft with quick release pins & safety
cover.
L (mm)
W (mm)
H (mm)
Kg (dry)
1350
1395
1315
145
1350
1395
1610
160
CODE
K08N12V-125S
K08N15V-125S
K11N12V-125S
K11N15V-125S
CODE
J99-72E
K99-47
042U-2
J99-146
J99-170
J99-117
J99-143
45
Booms &
Accessories
46
Silvan’s three point linkage and trailed sprayers
can be fitted with various booms, hose reels and
foam marker options depending on the specific
requirements of the application.
1300 745 826
www.silvan.com.au
Vineyard & Orchard Booms
UNDER VINE SHIELDED BOOM SPECIFICATIONS
Plated RHS frame with spring loaded
breakaways to protect the boom if an obstacle
is struck
Durable poly boom shields with optional
brush skirts to minimise spray drift and avoid
snagging
CONSTRUCTION
SHIELD
Under vine shielded boom
Double swivel nozzle holders can be fitted with
flat fan or off-centre nozzles
NOZZLES
DESCRIPTION
UNDER VINE SHIELDED BOOM
CODE
PF000040
480mm long
Under vine and mid row boom
UNDER VINE SHIELDED BOOM
PF000039
600mm long
UNDER VINE AND MID ROW BOOM
(includes brush skirts)
BRUSH SKIRT
032-HERB
GP00600010
Note: Not all options will fit all models.
Extra charges may apply to fitment of some options.
ADJUSTABLE VINE BOOM SPECIFICATIONS
8 jet and 10 jet.
SIZE
Plated RHS frame with stainless steel spraylines.
CONSTRUCTION
BOOM ADJUSTMENT
NOZZLES
CAPACITY
Two telescopic arms for width adjustment with
pivoting spraybars to adjust spray angle.
High pressure adjustable brass nozzle holder with
ceramic tips. Nozzles can be adjusted from cone
to straight jet. Nozzle body angle also variable.
Recommended 60L/min pump for 8 jet and 90L/
min pump for 10 jet vine boom.
DESCRIPTION
ADJUSTABLE VINE BOOM
10 Jet Vine boom
CODE
032-G
8 Jet vine boom
10 Jet vine boom
032-H
Note: Not all options will fit all models.
Extra charges may apply to fitment of some options.
OLIVE BOOM SPECIFICATIONS
9 jet.
SIZE
CONSTRUCTION
BOOM ADJUSTMENT
NOZZLES
CAPACITY
DESCRIPTION
OLIVE BOOM
Fully galvanised all steel construction with
stainless steel spraylines.
Telescopic arm for width adjustment together with
pivoting spraybars to adjust spray angle.
High pressure adjustable brass nozzle holder with
ceramic tips. Nozzles can be adjusted from cone to
straight jet. Nozzle body angle also variable.
Recommended 120L/min pump.
Olive boom
CODE
032-R
Note: Not all options will fit all models.
Extra charges may apply to fitment of some options.
1300 745 826
www.silvan.com.au
47
Field & Cane Booms
6m Field boom
FIELD
FIELDBOOM
BOOMSPECIFICATIONS
SPECIFICATIONS
6, 8 and 10m.
SIZE
CONSTRUCTION Fully galvanised all steel construction.
Booms fold horizontally at rear of sprayer. Break back
BOOM
device that protects boom if obstruction is hit.
ADJUSTMENT
SPRAYLINES
Stainless steel spraylines with 50cm nozzle spacings
and nozzle protection
NOZZLES
Non-drip nozzle holders, supplied with air induction
nozzles and nozzle strainers.
DESCRIPTION
FIELD BOOM: 6m Field boom
FIELD BOOM: 8m Field boom
FIELD BOOM: 10m Field boom
CODE
032-044-6
032-044-8
032-044-10
Note: Not all options will fit all models. Extra charges may apply to fitment of some options.
4 Row Cane boom
BOOM SPECIFICATIONS
SPECIFICATIONS
CANE BOOM
4 row or 6 row to suit row widths from 1.5m to 1.8
SIZE
CONSTRUCTION Robust fully galvanised construction.
SPRAYHEADS
Fitted with heavy duty hinges to withstand drag and
parallelogram tracking system. Shielded spray head
available standard as 900mm with fitted with brush skirts.
500-1800mm width sprayhead options are available.
BOOM FOLDING
SPRAYLINES
NOZZLES
MODEL DESCRIPTION
4 ROW CANE BOOM WITH HYDRAULIC FOLD
6 ROW CANE BOOM WITH HYDRAULIC FOLD
FACTORY OPTIONS
Broadacre boom attachment (to suit 4 row)
Broadacre boom attachment (to suit 6 row)
Hydraulic lift
Hydraulic twin folding ram mechanism (folding requires
one set of tractor remotes) with automatic cable fold
mechanism for spray heads.
Stainless steel spraylines.
Two twin swivel nozzle bodies per spray head with air
induction nozzles and nozzle strainers.
CODE
035-4N
035-6N
CODE
035-4B
035-6B
032-40DL
ACCESSORIES
Cane Boom Shield Assembly (pair)
Cane Boom Parallelogram Arm - Inner (pair)
Cane Boom Parallelogram Arm - Outer (pair)
Note: Not all options will fit all models. Extra charges may apply to fitment of some options.
48
K99-40
K99-41
K99-42
1300 745 826
www.silvan.com.au
Devil & Rowmaster Booms
6m Devil boom
8m Devil boom
10m Devil boom
12m Devil boom
14m & 15m Devil boom
DEVIL BOOM SPECIFICATIONS
SIZE
6, 8, 10, 12, 14 & 15m
BOOM
ADJUSTMENT
Two independent hydraulic rams. (Folding needs 2 sets of
tractor remotes). Spring loaded breakback of entire arm.
Hydraulic boom tilt adjustment available
(Requires an extra set of tractor remotes)
CONSTRUCTION
Fully galvanised high-tensile steel truss-section frame.
SPRAYLINES
Stainless steel spraylines with 50cm nozzle spacings and
air induction nozzles.
MODEL DESCRIPTION
6M DEVIL BOOM WITH HYDRAULIC FOLD
8M DEVIL BOOM WITH HYDRAULIC FOLD
10M DEVIL BOOM WITH HYDRAULIC FOLD
12M DEVIL BOOM WITH HYDRAULIC FOLD
14M DEVIL BOOM WITH HYDRAULIC FOLD
15M DEVIL BOOM WITH HYDRAULIC FOLD
FACTORY OPTIONS
CODE
032-19D
032-25D
032-32D
032-40D
032-48D
032-50D
CODE
Hydraulic lift, galvanised single hydraulic system for 6, 8 & 10m Devil booms
Hydraulic lift, galvanised single hydraulic system for 12, 14 & 15m Devil booms
Note: Extra charges may apply to fitment of some options.
032-19DL
032-40DL
12m Rowmaster boom
HYDRAULIC ROWMASTER
BOOM SPECIFICATIONS
ROWMASTER
BOOM SPECIFICATIONS
12m and 15m
SIZE
CONSTRUCTION Fully galvanised high-tensile steel truss-section frame.
BOOM
SUSPENSION
Coil spring over shock absorber parallelogram suspension.
Self levelling boom with spring, shock absorber roll
suspension and polyurethane yaw damping.
SPRAYLINES
Stainless steel spraylines with 50cm nozzle spacing.
Air induction nozzles in bayonet fit non-drip nozzle holders
with nozzle strainers.
Hydraulic lift and fold requiring one set of remotes for lift
and one set for fold. Optional wing tilt requires 4/6 sets of
BOOM FOLDING remotes or electric-over-hydraulic controls. Single acting
vertical lift features 1.2m stroke with the outer boom fold
with a unique hydraulic breakback of the entire outer arm.
NOZZLES
MODEL DESCRIPTION
12M HYDRAULIC BOOM
15M HYDRAULIC BOOM
FACTORY OPTIONS
48
CODE
TD-012V
TD-015V
CODE
Wing tilt.
J99-170
Fenceline nozzle kit (electric).
J99-72E
Electric over hydraulic solenoids (3 bank)
J99-117
Electric over hydraulic solenoids (5 bank for wing tilt)
Note: Not all options will fit all models. Extra charges may apply to fitment of some options.
J99-143
1300 745 826
www.silvan.com.au
49
Accessories
FREE STANDING SILMIX
60L polyethylene tank with hinged lid and
TANK
FUNCTION
FRAME
CONTROLS
DIMENSIONS
moulded calibration marks. Mesh grate in bottom.
Uses external water supply to activate venturi inductor at
the base of the unit to transfer chemicals from hopper to
sprayer tank. The same water supply operates the wash
bar and drum rinse nozzle in the hopper. Transfer system
requires minimum 4 bar (60 psi) water pressure to operate.
Galvanised steel support frame.
3 on/off taps to control:
1. Powder washer bar inside hopper.
2. Push activated drum rinse nozzle.
3. C
hemical transfer venturi. Also has valve at base of unit
to isolate the tank from the induction venturi.
L (mm)
W (mm)
H (mm)
Kg (dry)
420
750
778
32 (Approx)
MODEL DESCRIPTION
SILVAN 60L SILMIX ON FRAME
CODE
042J-05ST
30L PADDOCK FOAM MARKER
TANK
30L polyethylene tank with moulded litre
calibration indicators.
PUMP
Fully sealed, dust free compressor and
electrics box with air breather
FRAME
Hot dip galvanised steel support frame.
Double sided operation with electric cab control.
Needle valve for foam output adjustment.
2 foam droppers
60m of reinforced delivery hose
CONTROLS
DROPPERS
HOSE
MODEL DESCRIPTION
CODE
30L PADDOCK FOAM MARKER
042U-2
Pictured: Economy reel
kit with 30m of 10mm ag
hose & PA spray gun
Pictured: Pitarm reel kit with
100m of 12mm nylon tube
hose & Triam 49 spray gun
FACTORY OPTIONS
CODE
Economy reel, 20m x 12mm ag hose & Triam 49 spray gun
180E02012CT
Economy reel, 30m x 10mm ag hose & PA spray gun with stainless steel extension
180E03010C
Pitarm reel, 100m x 12mm ag hose & Triam 49 spray gun
180P10012C
Pitarm reel, 100m x 12mm nylon tube & Triam 49 spray gun
180P10012T
Pitarm reel bracket (for sled units)
454-44
Note: Not all options will fit all models. Extra charges may apply to fitment of some options.
50
1300 745 826
www.silvan.com.au
Silvan offer sprayers for specific
applications which can be customised
with an extensive range of options.
Designed for use in vineyards, pasture,
turf and vegetable production.
1300 745 826
www.silvan.com.au
Trailed & Sled
Mount Sprayers
51
Trailed Pasture Sprayer
Pictured: Trailed Pasture Sprayer with optional
8m Devil boom and Paddock foam marker
MODEL SPECIFICATIONS
PUMP
CONTROLS
TANK
FRAME
Silvan self-priming oil-backed diaphragm type
with nitrile diaphragms and corrosion resistant,
cast anodised aluminium body. BP125/20:
121L/min. capacity 2000kPa pressure
One lever 3 outlet control with pressure
regulator mounted on adjustable arm.
Polytuff impact resistant polyethylene
construction, calibrated sight line, non-spill
screw-down lid with dual breathers.
Galvanised RHS steel construction, jockey
wheel & height adjustable tow hitch.
J20-S105
BP125/20 pump, single axle
FACTORY OPTIONS
CODE
6m Devil boom with hydraulic fold
032-19D
6m Field boom
032-044-6
8m Devil boom with hydraulic fold
032-25D
8m Field boom
032-044-8
10m Devil boom with hydraulic fold
032-32D
10m Field boom
032-044-10
AGITATION
Bypass action.
PRESSURE
GAUGE
0-25 Bar dual stage glycerine filled gauge
mounted on adjustable arm.
FILTRATION
Lid strainer and suction line strainer
30L Paddock foam marker
WHEEL
EQUIPMENT
2000L: 60mm straight single axle fitted with 15”
tubeless tyres on galvanised rims (max speed
rating 30km/h).
Quality Bondioli & Pavesi driveshaft with quick
release pins & safety cover.
3 section electric control with pressure adjusted
K99-29
11.00 x 16” Multi-rib tyres
D99-52
6.5HP Honda engine drive BP125/20 diaphragm pump
(In lieu of PTO drive BP125/20)
J99-158
PTO
DRIVESHAFT
DIMENSIONS L (mm)
W (mm)
H (mm)
Kg (dry)
J20-S105
3500
2100
440
1550
46
52
MODEL DESCRIPTION
STANDARD 2000L TRAILED
50
6, 8 and 10m Devil boom hydraulic lift
032-19DL
12m Devil boom hydraulic lift
032-40DL
042U-2
Note: Not all options will fit all models. Extra charges may apply to fitment of some
options. Disclaimer: Above unit shown with options..
Note: When a Devil boom is fitted
to these units, only Devil booms up
to 12M are recommended
1300 745 826
www.silvan.com.au
Row King 2500L
Pictured: 2500L Row King with
12m Rowmaster boom
MODEL SPECIFICATIONS
PUMP
CONTROLS
TANK
Silvan self-priming oil backed diaphragm pump
with nitrile diaphragms and corrosion resistant,
anodised cast aluminium body. BP 151/20
142 L/min. capacity 2000kPa pressure.
Silvamatic electric controls with pressure
compensating direct acting valves. In cab on/off
and pressure adjustment with pressure gauge.
2500L Polytuff impact resistant polyethylene
construction calibrated sight line, non-spill
screw-down lid with dual breathers and bottom
fill connection.
TANK RINSING 360 degree tank rinsing nozzle.
FLUSH TANK
200L
FRESH WATER
14L fresh water tank for hand wash.
FRAME
Galvanised RHS steel construction, TPL turning
hitch with adjustable height/length, parking leg
and operator platform with ladder.
AGITATION
Supermix venturi agitator.
FILTRATION
4 stage: Lid strainer, bottom fill filter, suction line
filter, pressure line filter and nozzle cup strainers.
Adjustable width single axle wheels with 11.2” x
44” lugged tyres. 60” c/c minimum width.
WHEEL
EQUIPMENT
CHEMICAL
INDUCTION
BOTTOM FILL
PRESSURE
GAUGE
DIMENSIONS
(WITH BOOM)
Silmix hopper on drop down frame.
Bottom fill with filter, non-return valve &
camlock coupling.
At operator work station and in-cabin control box.
L (mm)
W (mm)
H (mm)
Kg (dry)
5300
2400
3000
2000
1300 745 826
www.silvan.com.au
MODEL DESCRIPTION
2500L ROW KING
(REAR MOUNT, EXCLUDES BOOM)
JV25-R
2500L ROW KING
(FRONT MOUNT, EXCLUDES BOOM)
JV25-F
FACTORY OPTIONS
12M FRONT MOUNT ROWMASTER BOOM
Vertical lift, parallel arm suspension with boom rest cradle
15M FRONT MOUNT ROWMASTER BOOM
CODE
CODE
TD-012V
Vertical lift, parallel arm suspension with boom rest cradle
TD-015V
12M DEVIL BOOM
with hydraulic fold (rear mount only)
032-40D
15M DEVIL BOOM
with hydraulic fold (rear mount only)
032-50D
Hydraulic lift, galvanised hydraulic system
- 12 & 15m Devil booms
Fenceline nozzle kit (electric)
032-40DL
J99-72E
Bravo 180S spray rate controller
J99-146
50mm fill flow meter
J99-145
Hydraulically driven, self-priming Hypro centrifugal
pump (In lieu of PTO driven BP151/20)
Wing tilt for 12 and 15m Rowmaster booms
J99-126
J99-170
Electric over hydraulic solenoids (3 bank)
J99-117
Electric over hydraulic solenoids (5 Bank for wing tilt)
J99-143
When ordering hydraulic drive pumps, tractor hydraulic capacity and system must
be written on order. Note: Not all options will fit all models. Extra charges may
apply to fitment of some options. Some pricing in lieu.
53
Trailed Turf Sprayer
Pictured above: Turf sprayer with
optional Devil boom, Paddock foam marker,
electric controls and extra Pitarm hose reel
Pictured: 1000L turf sprayer
MODEL SPECIFICATIONS
Silvan self-priming, oil-backed diaphragm type with
nitrile diaphragms and corrosion resistant, cast
anodised body. Direct coupled to 6.5HP Honda motor.
BP 125/20:121L/min. capacity 2000 kPa.
PRESSURE GAUGE 0-25 Bar dual stage glycerine filled gauge.
FILTRATION
Suction line filter & lid strainer.
CONTROLS
3 outlet control with pressure regulator mounted on
pump. Pressure gauge on control unit.
WHEELS
Tubeless 29x13.5 - 15” turf tyres with galvanised
rims on 1000L unit.
Tubeless 31x13.5 - 15” turf tyres with galvanised
rims on 2000L unit.
TANK
1000/2000L polytuff impact resistant polyethylene
construction. Calibrated sight line. Non-spill
screw-down lid with breather.
HOSEREEL
30m of 19mm PVC hose and fish mouth
fertiliser nozzle.
FRAME
Galvanised RHS steel construction with jockey wheel.
L (mm)
W (mm)
H (mm)
Kg (dry)
AGITATION
Bypass action and venturi agitators.
DIMENSIONS
PR10-01
PR20-2
3400
3500
1870
2600
1825
2100
275
400
PUMP
MODEL DESCRIPTION
1000L TURF SPRAYER: BP125/20 diaphragm pump, direct coupled to 6.5HP Honda motor,
manual controls on pump and Pitarm hosereel with fish mouth nozzle.
CODE
PR10-01
2000L TURF SPRAYER: BP125/20 diaphragm pump, direct coupled to 6.5HP Honda motor,
PR20-2
manual controls on pump and Pitarm hosereel with fish mouth nozzle.
FACTORY OPTIONS
CODE
6m Field boom
032-044-6
6m Devil boom with hydraulic fold
032-19D
8m Field boom
032-044-8
8m Devil boom with hydraulic fold
032-25D
10m Field boom
032-014-10
10m Devil boom with hydraulic fold
032-32D
6, 8 and 10m Devil boom hydraulic lift
032-19DL
30L Paddock marker foam marker
042U-2
Electric valve controls with pressure regulator and in cab pressure adjustment
K99-29
Bravo 180S automatic rate controller
J99-151
Note: Not all options will fit all models. Extra charges may apply to fitment of some options.
54
1300 745 826
www.silvan.com.au
Tray Mount Turf Sprayer
Pictured: 400L tray demountable sled sprayer with
optional hydraulic 6m Devil boom and foam marker.
(Vehicle shown for illustrative purposes only)
MODEL SPECIFICATIONS
PUMP
CONTROLS
TANK
Silvan self-priming oil-backed diaphragm type with
nitrile diaphragms and corrosion resistant, cast
anodised aluminium body. BP60/20: 58L/min capacity,
2000kPa pressure, direct driven by 5.5HP Honda with
6.1 reduction gear box.
3 section electric valves. Control box with pressure
adjustment and on/off switches mounted on arm close
to operator.
400L, Polytuff impact resistant polyethylene
construction with calibratrated external sightline, nonspill screw‑down lid, internal baffle and sump.
FRAME
Fully galvanised RHS steel sled frame for fitment into
standard Cushman tray body. Removable stand legs
when not in use.
AGITATION
Bypass action and venturi jet.
PRESSURE
GAUGE
0-25 Bar dual stage glycerine filled gauge.
FILTRATION
Lid strainer and suction line strainer.
HOSEREEL
Economy hose reel with 20m x 12mm ag hose and
Triam 99 spray gun.
MODEL DESCRIPTION
400L TRAY DE-MOUNTABLE SLED SPRAYER: Sled mounted with BP60/20 pump, 5.5HP Honda,
electric controls, economy reel, 20m hose and gun (no boom)
FACTORY OPTIONS
CODE
CUSH-07
CODE
6m Field boom
032-044-6
6m Devil boom with hydraulic fold
30L Paddock foam marker
032-19D
042U-2
Bavo 180S automatic rate controller (includes BP125/20 pump upgrade)
CUSH-12
Note: Not all options will fit all models. Extra charges may apply to fitment of some options.
1300 745 826
www.silvan.com.au
55
Trailed Herbicide
Pictured above: 2000L
herbicide unit with optional
11.00 x 16 multirib tyres
Pictured: Optional Undervine
and mid row boom
MODEL SPECIFICATIONS
PUMP
Silvan self-priming oil-backed diaphragm type with
nitrile diaphragms and corrosion resistant, cast
anodised aluminium body. BP125/20: 121L/min.
capacity 2000 kPa pressure
PRESSURE
GAUGE
FILTRATION
CONTROLS
Silvamatic 3 section electric valve on/off with in-cab
electric pressure adjustment from control box.
WHEEL
EQUIPMENT
TANK
Polytuff impact resistant polyethylene construction,
calibrated sight line & flip-top easy open lid.
FRAME
Galvanised RHS steel construction, jockey wheel
& adjustable tow hitch.
AGITATION
Bypass action.
PTO
DRIVESHAFT
DIMENSIONS
(WITH BOOM)
JB2000-125
MODEL DESCRIPTION
2000L TRAILED HERBICIDE SPRAYER: Electrics, BP125/20 Pump
Lid strainer & suction line strainer.
50mm Duraflex axle with 50mm drop and sliding
adjustment. 15” tyres on galvanised rims (max. speed
rating 30 km/h).
Quality Bondioli & Pavesi driveshaft with quick release
pins & safety cover.
L (mm)
W (mm)
H (mm)
Kg (dry)
3000
1800
1530
400
CODE
JB2000-125
FACTORY OPTION
CODE
11.00 x 16” Multirib tyres
Undervine and mid row boom
Note: Not all options will fit all models. Extra charges may apply to fitment of some options.
56
0-25 Bar dual stage glycerine filled gauge.
D99-52
032-HERB
1300 745 826
www.silvan.com.au
Trailed 3 Row Herbicide
Pictured: Trailed herbicide sprayer
with under-vine & mid row booms.
MODEL SPECIFICATIONS
BOOM FRAME
Heavy duty over row boom frame designed for spraying
three rows in one pass (row widths from 2.5 to 3.5ms).
Left and right arms have independent hydraulic fold with
manual width and height adjustment.
PUMP
Silvan self-priming oil-backed diaphragm type with
nitrile diaphragms and corrosion resistant, cast anodised
aluminium body.
BP125/20: 121L/min. capacity 2000 kPa pressure
CONTROLS
4 section electric valve on/off with electric pressure
adjustment from cab mounted control box.
TANK
Polytuff impact resistant polyethylene construction,
calibrated sight line, non-spill flip top lid and 40L fresh
water tank.
FRAME
AGITATION
PRESSURE
GAUGE
FILTRATION
WHEEL
EQUIPMENT
PTO
DRIVESHAFT
DIMENSIONS
(BOOM FOLDED)
Galvanised RHS heavy duty steel construction, jockey wheel
and adjustable tow hitch.
Bypass action.
0-25 Bar dual stage glycerine filled gauge.
Lid strainer, suction line strainer & nozzle strainers
Tandem suspension axle with 10 x 15” wheels and tyres
Quality Bondioli & Pavesi driveshaft with quick release
pins & safety cover.
L (mm)
W (mm)
H (mm)
Kg (dry)
4600
1800
3300
990
MODEL DESCRIPTION
CODE
2000L TRAILED 3 ROW HERBICIDE SPRAYER: BP125/20 Pump (with under-vine and mid row booms)
FACTORY FITTED OPTIONS
JB2000-1253RT
CODE
Bravo 180S automatic spray rate controller
J99-146
Hypro hydraulically driven centrifugal pump
J99-126
Hydraulic row width and height adjustment
-
When ordering hydraulic drive pumps, tractor hydraulic capacity and system must be on order. Note: Extra charges may apply to fitment of some options.
1300 745 826
www.silvan.com.au
57
Guidance Systems
and Controllers
58
For increased spraying efficiency, various
technology options such as automatic
spray rate controllers, in-cab electric
controls and GPS guidance systems are
available to suit the user’s specific needs.
1300 745 826
www.silvan.com.au
Guidance Systems
-1
Swath
8.96
acres
3.2
MATRIX GUIDANCE FUNCTIONS
Straight A-B Guidance
Curved A-B Guidance
Circle Pivot Guidance
Last Pass Guidance
Return to Point
MATRIX 570 GPS
Complete GPS system designed to provide enhanced visual guidance on screen (plus lightbar) for day or night operations. Enhance your accuracy with
D-GPS (where available), USB connectivity for generating reports that can show you where you have sprayed, area covered and time spent. Connect a
camera for a useful Heads-up-Display and visually see your accuracy (or position to monitor hard to see machine parts or booms).
FEATURES
5.7” display, touch screen, USB port, external antenna
DESCRIPTION
MATRIX 570 GPS
90-02605
CODE
MATRIX 570 GPS & CAMERA
90-02556
External Antenna
CENTERLINE 220
GUIDANCE FUNCTIONS
Straight A-B Guidance
Centerline 220
Curved A-B Guidance
Return to Point
CENTERLINE 220 GPS
This guidance system is designed to let you take advantage of GPS lightbar guidance for any field operation. Inside the conveniently sized guidance system
is a high-quality GPS receiver with easy to operate controls.
FEATURES
DESCRIPTION
CENTERLINE 220 GPS
1300 745 826
Traditional lightbar guidance with graphical display, internal GPS engine, external antenna
CODE
90-02401
www.silvan.com.au
59
Bravo Tree Sensor Kits
Ultrasonic
Sensor
Bravo140
For illustrative purposes only
BRAVO 140 KIT SPECIFICATIONS
The Bravo 140 tree sensor detects tree canopies, trunks or stakes via ultrasonic sensors mounted at the front of the sprayer. The sprayer then only sprays
the tree, not the spaces in between. You not only use significantly less Chemical, your tank refills are reduced saving you time and money.
DISPLAY
Speed, sprayed tree, number of trees, sensor status
CONTROL
Up to 2 ultrasonic sensors and 2 sections
KIT CONTENTS
Kit includes control box, tractor loom, sprayer loom, ultrasonic sensors, speed sensor and solenoids
DESCRIPTION
ARAG BRAVO 140
CODE
D99-165
Controllers
Note: Extra components may be needed
For illustrative purposes only
Bravo130
Ultrasonic
Sensor
BRAVO 130 KIT SPECIFICATIONS
The Bravo 130 tree sensor detects tree canopies, trunks or stakes via ultrasonic sensors mounted at the front of the sprayer. The sprayer then only sprays
the tree, not the spaces in between. You not only use significantly less Chemical, your tank refills are reduced saving you time and money. As well as tree
detection, this model also enables spray rate monitoring and up to 4 section target sensing control
DISPLAY
Speed, sprayed tree, number of trees, sensor status, flow rate
CONTROL
Up to 4 ultrasonic sensors and 4 sections
KIT CONTENTS
Kit includes control box, tractor loom, sprayer loom, 2 ultrasonic sensors, speed sensor and 2 section valve bank with flow meter
DESCRIPTION
ARAG BRAVO 130
CODE
D99-167
Note: Extra components may be needed
60
1300 745 826
www.silvan.com.au
Bravo Rate Controller Kits
BRAVO 180S SPRAY RATE CONTROLLER KIT SPECIFICATIONS
A compact and easy to use spray controller that ensures constant and precise rate control.
DISTRIBUTION CONTROL
Automatic adjustment of spray application rate by measuring flow and speed.
SECTIONS
Control of up to 5 sections
KIT CONTENTS
Kit includes control box, tractor loom, sprayer loom and speed sensor
DISPLAY
Simultaneous display of application rate (l/ha) and: speed, area, sprayed quantity, tank
level, flow rate (l/min), field number, operating time and distance
DESCRIPTION
CODE
ARAG Bravo 180S 4 sections (For horticultural applications)
BRAVO180HKIT
ARAG Bravo 180S 5 sections (For broadacre applications)
BRAVO180BAKIT
Note: Extra components including electric valves and flow meter may be needed
TECHNOLOGY
Bravo300S
Bravo300S RCU
BRAVO 300S AND 300S RCU SPRAY RATE CONTROLLER SPECIFICATIONS
The Bravo 300S and 300S RCU take top spot for spray rate control, ensuring constant and precise rate control and a full range of software options making
spraying safer and more efficient. Used for broadacre, viticulture and horticulture.
DISTRIBUTION CONTROL
Automatic adjustment of spray application rate by measuring flow and speed.
SECTIONS
Control of up to 5 sections (300S)
Control of up to 5 sections & 7 hydraulic functions (300S RCU)
KIT CONTENTS
Control box, tractor loom, sprayer loom and speed sensor
MEMORY
SD memory card to store working reports; path and treatment data for each area
DISPLAY
Simultaneous display application rate (l/ha) and speed, area, sprayed quantity, tank level,
flow rate (l/min), field number, operating time and distance
DESCRIPTION
CODE
ARAG BRAVO 300S - 4 sections
BRAVO300SHKIT
ARAG BRAVO 300S - 5 sections
BRAVO300SBAKIT
ARAG BRAVO 300S RCU - 5 sections, 7 hydraulic functions
BRAVO300SRCUBAKIT
Note: Extra components including electric valves and flow meter may be needed
1300 745 826
www.silvan.com.au
61
Electric Control Kits
SILVAMATIC ELECTRIC SPRAY CONTROL KIT
Features an in-cab control box with proportional pressure compensating valves
designed to maintain constant pressure and output even after one or more boom
sections are closed.
• Direct acting valves
• Stainless steel components and viton seals
• 3 boom section outlet with 12mm tails
• On/off and pressure adjustment switch
• Individual valves have own compensating device
KIT CONTENTS
Kit includes control box, tractor loom, sprayer loom
and valves
DESCRIPTION
SILVAMATIC CONTROL KIT
CODE
461530A
Note: Extra components may be needed
HIGH PRESSURE ELECTRIC BALL VALVE KIT
Modular 12 volt DC electric control kit ideal for use on high pressure orchard
sprayers. Supplied complete with 2 on/off electric ball valves for left or right side
spraying and 1 bypass electric valve, manual pressure regulator with 100mm face
glycerine filled pressure gauge. Control switch box suitable for mounting in tractor
cabin with electric wiring loom.
KIT CONTENTS
Kit includes control box, tractor loom, sprayer loom
and valves
DESCRIPTION
HIGH PRESSURE ELECTRIC
BALL VALVE KIT
CODE
BRA98
Note: Extra components may be needed
MEDIUM PRESSURE ELECTRIC SOLENOID KIT
Medium pressure control kit is ideal for boom spray applications and is available
in three section on/off with control box suitable for mounting in tractor cabin and
electric wiring loom. Maximum operating pressure 10BAR
Note: Pressure regulator and hose not included.
KIT CONTENTS
Kit includes control box, tractor loom, sprayer loom
and solenoids
DESCRIPTION
MEDIUM PRESSURE
ELECTRIC SOLENOID KIT
CODE
M99-14
Note: Extra components may be needed. Pressure regulator and hoses not included.
62
1300 745 826
www.silvan.com.au
Air Assist/Turbomiser Ordering Checklist
PRODUCT CODE (SILVAN USE
ONLY)
W/O NUMBER (SILVAN USE ONLY)
DELIVERY DATE
DEALER ORDER NO
Dealership / Customer Name:
Order Date:
Dealership / Customer Address:
Postcode:
Other Instructions:
Dealer Sign-off:
Customer Sign-off:
1. MODEL
SUNTUFF
3000L
TURBOMISER 1 ROW
G2 TGS 3 ROW
SUPAFLO
STD TGS 2 ROW
TURBOWRAP
G2 TURBOWRAP
STILETTO
STD TGS 3 ROW
TRIWRAP
G2 TRIWRAP
G2 SUPAFLO
TURBOMISER TPL
G2 TGS 2 ROW
OTHER
500L
3500L
600L
4000L
APS145
IDS2200
OTHER
APS166
IDS2600
800MM
STD RADAK
HYD BOTTOM WINGS
TURBO P55
TWIN SNORKEL
900MM
TALL TOP ‐ STD BOTTOMS
TURBO P42
TGS SINGLE FAN
GEOLINE ELEC
BRAVO 300S RCU
GEOATOM WIRELESS
ELEC/HYD
31 x 10.5 RIB
11.5/80 X 15.3
400/55‐22.5
50mm LAP
STRAIGHT
Note: All units except 3000L use Simplicity tandem axle
GLIDEFLEX
2. TANK SIZE
200L
2000L
4200L
400L
3000L
3. PUMPS
APS71
IDS1701
HYDRAULIC
APS96
IDS2001
STD
4. FAN
600MM
POWERHEAD
TALL TOP ‐ WIDE BOTTOMS
TURBO P45
TGS TWIN FAN
700MM
POWER RADAK
HYD TOP WINGS
TURBO P50
SINGLE SNORKEL
5. CONTROLS
MANUAL
BRAVO 180S
CABLE
BRAVO 300S
6. WHEELS
11.00 x 16
12.4 x 18
31 x 10.5 M/T
12.4 x 24
7. AXLES
100mm DROP
TANDEM AXLE
8. OPTIONS
ONE‐SIDED CONVEYOR
TWO‐SIDED DEFLECTOR
BOTTOM AIR DEFLECTORS
VINEYARD CONVEYOR
SUPER CANNON (TURBO)
VINEYARD HEAD (TURBO)
ORCHARD HEAD (TURBO)
ORCHARD CANNON (TURBO)
HI‐LO ORCHARD (TURBO)
QUICK TURN HITCH
TURBO TOWER
ROAD KIT
HYDRAULIC LIFT
WORK LIGHTS
HYDRAULIC ROW WIDTH
OTHER
9. NOZZLE/RATE CONTROLLER SETUP
SPEED =
CROP =
APPL / RATE # 1 =
APPL / RATE # 2 =
ROW WIDTH # 1 =
ROW WIDTH # 2 =
NOZZLES =
CANOPY HEIGHT =
Note: failure to complete the nozzle/rate controller section will result in standard nozzles being fitted and any other nozzles supplied at dealer/customer cost
Conditions: (1) Sprayer Specification Checklist must be signed by dealer or authorised representative and faxed with purchase order to 1800 745 826
(2) Purchase order will not be processed without a completed Sprayer Specification Checklist.
(3) Silvan will not commence building or purchasing components for machine orders placed by dealers without the checklist being filled out to accompany their order.
(4) Silvan reserves the right not to accept for return any machine that has been manufactured and supplied according to the dealer checklist specifications.
1300 745 826
www.silvan.com.au
63
Spraying Information
HCC CERAMIC HOLLOW CONE NOZZLES
CAPACITY (L/min)
3
BAR
4
BAR
5
BAR
7
BAR
8
BAR
9
BAR
10
BAR
11
BAR
12
BAR
13
BAR
14
BAR
15
BAR
16
BAR
17
BAR
18
BAR
19
BAR
20
BAR
HCC005
0.19
0.22
0.25
0.27
0.29
0.31
0.33
0.35
0.36
0.38
0.40
0.41
0.42
0.44
0.45
0.47
0.48
0.49
HCC0075
0.30
0.35
0.39
0.42
0.46
0.49
0.52
0.55
0.57
0.60
0.62
0.65
0.67
0.69
0.71
0.73
0.75
0.77
HCC01
0.40
0.46
0.52
0.57
0.61
0.65
0.69
0.73
0.77
0.80
0.83
0.86
0.89
0.92
0.95
0.98
1.01
1.03
HCC015
0.60
0.69
0.77
0.85
0.92
0.98
1.04
1.10
1.15
1.20
1.25
1.30
1.34
1.39
1.43
1.47
1.51
1.55
HCC02
0.80
0.92
1.03
1.13
1.22
1.31
1.39
1.46
1.53
1.60
1.67
1.73
1.79
1.85
1.90
1.96
2.01
2.07
HCC025
1.00
1.15
1.29
1.41
1.53
1.63
1.73
1.83
1.91
2.00
2.08
2.16
2.24
2.31
2.38
2.45
2.52
2.58
HCC03
1.20
1.39
1.55
1.70
1.83
1.96
2.08
2.19
2.30
2.40
2.50
2.59
2.68
2.77
2.86
2.94
3.02
3.10
HCC035
1.40
1.62
1.81
1.98
2.14
2.29
2.42
2.56
2.68
2.80
2.91
3.02
3.13
3.23
3.33
3.43
3.52
3.61
HCC04
1.60
1.85
2.07
2.26
2.44
2.61
2.77
2.92
3.06
3.20
3.33
3.46
3.58
3.70
3.81
3.92
4.03
4.13
HCC05
2.00
2.31
2.58
2.83
3.06
3.27
3.46
3.65
3.83
4.00
4.16
4.32
4.47
4.62
4.76
4.90
5.03
5.16
PUMP
MODEL
CAPACITY
(FULL PRESS)
MAX
PRESURE
BP20/15
19 L/min.
15 bar
BP60/20
58 L/min.
20 bar
BP75/15
71 L/min.
15 bar
BP125/20
121 L/min.
20 bar
BP151/20
138 L/min.
20 bar
BP171/20
162 L/min.
20 bar
BP265/20
252 L/min.
20 bar
Example:
Application rate:
Tractor speed:
Boom width:
Tank capacity:
Pump output required = PUMP
MODEL
100 l/ha
12 km/h
10 m
800Ls
100 x 12 x 10
600
= 20 L/min
CAPACITY
(FULL PRESS)
MAX
PRESURE
APS 71
71L/min.
40 bar
APS 96
95 L/min.
40 bar
APS 121
115 L/min.
50 bar
APS 145
145 L/min.
50 bar
APS 166
163 L/min.
50 bar
IDS 1701
161 L/min.
50 bar
IDS 2001
182 L/min.
50 bar
IDS 2200
208 L/min.
50 bar
IDS 2600
249 L/min.
50 bar
Example:
Application rate:
Tractor speed:
Tree spacing:
Tank capacity:
Pump output required = 64
6
BAR
2000 l/ha
5 km/h
5m
2000Ls
2000 x 5 x 5
600
= 83.3 l/min
FINDING THE RIGHT PUMP
SILVAN LINKAGE OR TRAILED SPRAYER
STEP 1 Determine the application rate, boom width (inms)
and the tractor speed for the job.
STEP 2 Allow between 2% and 5% of the tank volume to be recirculated
every minute to provide agitation. If venturi agitators are used, allow for the volume
of liquid used by the venturi jet. When venturi’s are used they usually become the
primary method of agitation so the allowance for the percentage of tank volume
to be recirculated can be disregarded. There is always agitation from the pump
(diaphragm or piston type) when it is in bypass mode.
STEP 3 Use the following formula to calculate the pump output required by the boom.
Pump output required (l/min) = Application rate (l/ha) x Speed (km/h) x Boom width (m)
600
STEP 4 Allow 2% tank volume for agitation (example 800 x 2% =16L/min.) Add this amount
to required pump output for spraying to find total volume required from pump
(example 20 + 16 = 36L/min).
STEP 5 Select a pump from the table at right to match required total output.
SILVAN AIR ASSIST SPRAYER
STEP 1 Determine the application rate (l/ha), the tractor speed and the row width of the crop
being sprayed. STEP 2 Allow between 2% and 5% of the tank capacity to be recirculated every minute for
agitation. The lower percentage can be used where mechanical agitation is fitted.
STEP 3 Use the following formula to calculate the pump output required by the sprayer.
Pump output (l/min) = Application rate (l/ha) x Speed (km/h) x Row width (m)
600
STEP 4 Allow 2% tank volume for agitation (eg 2000 x 2% = 40L/min). Add this amount to
required pump output for spraying to find the total volume required from the pump
(example 83.3L/min + 40L/min = 123.3L/min).
STEP 5 Select a pump from the table above to match required total output.
NOTE: From the above table either the APS 145 or APS 166 would be suitable, but the
APS 166 will give more flexibility if larger application rates are needed.
1300 745 826
www.silvan.com.au
Spraying Information
Nozzle selection is often based upon droplet size. The droplet size from a nozzle becomes very important when the efficacy of a particular plant protection
Chemical is dependent on coverage, or the prevention of spray leaving the target area is a priority.
The majority of the nozzles used in agriculture can be classified as producing either fine, medium, coarse, or very coarse droplets. Nozzles that produce fine
droplets are usually recommended for post-emergence applications,which require excellent coverage on the intended target area. The most common nozzles
used in agriculture are those that produce medium sized droplets. Nozzles producing medium and coarse-sized droplets can be used for contact and systemic
herbicides, pre-emergence surface-applied herbicides, insecticides and fungicides.
An important point to remember when choosing a spray nozzle that produces a droplet size in one of the six categories is that one nozzle can produce different droplet size classifications at different pressures. A nozzle might produce medium droplets at low pressures, while producing fine droplets as the pressure is
increased. Droplet size classes are shown in the following tables to assist in choosing an appropriate spray tip.
XR Teejet and XRC Teejet
TP Teejet
2
F
F
M
M
M
C
C
C
F
F
F
F
M
M
M
C
TP8001
TP80015
TP8002
TP8003
TP8004
TP8005
TP8006
TP8008
TP11001
TP110015
TP11002
TP11003
TP11004
TP11005
TP11006
TP11008
BAR
3
F
F
F
M
M
M
C
C
F
F
F
F
M
M
M
M
2.5
F
F
M
M
M
M
C
C
F
F
F
F
M
M
M
C
3.5
F
F
F
M
M
M
C
C
VF
F
F
F
F
M
M
M
4
F
F
F
M
M
M
C
C
VF
F
F
F
F
M
M
M
XR8001
XR80015
XR8002
XR8003
XR8004
XR8005
XR8006
XR8008
XR11001
XR110015
XR11002
XR110025
XR11003
XR11004
XR11005
XR11006
XR11008
1
M
M
M
M
C
C
C
VC
F
F
M
M
M
M
C
C
C
1.5
F
M
M
M
M
C
C
VC
F
F
F
M
M
M
M
C
C
BAR
2.5
F
F
M
M
M
M
C
C
F
F
F
F
F
M
M
M
C
2
F
F
M
M
M
C
C
C
F
F
F
F
F
M
M
M
C
2
2.5
3
3.5
4
4.5
5
5.5
6
7
TTI110015
UC UC UC UC UC UC XC XC XC XC XC XC
TTI11002
UC UC UC UC UC UC UC UC XC XC XC XC
TTI110025
UC UC UC UC UC UC UC UC XC XC XC XC
TTI11003
UC UC UC UC UC UC UC UC XC XC XC XC
TTI11004
UC UC UC UC UC UC UC UC XC XC XC XC
1.5
2
2.5
3
3.5
4
4.5
5
5.5
6
TTJ60-11002
C
C
C
C
M
M
M
M
M
M
VC
C
C
C
C
C
C
M
M
M
TTJ60-11003
VC
C
C
C
C
C
C
C
M
M
TTJ60-11004
VC
C
C
C
C
C
C
C
C
M
VC
C
C
C
C
C
C
C
C
C
XC
VC
C
C
C
C
C
C
C
C
TTI11005
UC UC UC UC UC UC UC UC XC XC XC XC
TTI11006
UC UC UC UC UC UC UC UC XC XC XC XC
TTJ60-11006
BAR
2
2.5
3
AIXR110015
XC
VC
VC
C
C
AIXR11002
XC XC
VC
VC
C
3.5
4
4.5
5
5.5
6
C
C
M
M
M
M
C
C
C
C
M
M
C
AIXR110025
XC XC XC
VC
VC
C
C
C
C
C
AIXR11003
XC XC XC
VC
VC
C
C
C
C
C
C
AIXR11004
UC XC XC XC
VC
VC
VC
C
C
C
C
AIXR11005
UC XC XC XC XC
VC
VC
VC
C
C
C
AIXR11006
UC XC XC XC XC
VC
VC
VC
C
C
C
2
2.5
HCC005
HCC0075
HCC01
HCC015
HCC02
HCC025
HCC03
HCC035
HCC04
HCC05
3
VF
F
F
F
F
F
F
F
F
F
4
VF
VF
VF
F
F
F
F
F
F
F
BAR
6
VF
VF
VF
VF
VF
VF
VF
VF
F
F
5
VF
VF
VF
VF
F
F
F
F
F
F
8
VF
VF
VF
VF
VF
VF
VF
VF
F
F
10
VF
VF
VF
VF
VF
VF
VF
VF
VF
F
15
VF
VF
VF
VF
VF
VF
VF
VF
VF
VF
Turbo Teejet and Turbo Teejet Duo
BAR
BAR
3.5
4
4.5
5
5.5
6
6.5
7
8
AI110015
UC XC XC XC XC VC VC VC VC
C
C
C
AI11002
UC XC XC XC XC VC VC VC VC
C
C
C
AI110025
UC UC XC XC XC XC VC VC VC VC
C
C
AI11003
UC UC XC XC XC XC VC VC VC VC
C
C
AI11004
UC UC XC XC XC XC VC VC VC VC
C
C
AI11005
UC UC XC XC XC XC VC VC VC VC
C
C
AI11006
UC UC XC XC XC XC XC VC VC VC VC
C
AI11008
UC UC UC XC XC XC XC VC VC VC VC
C
AI11010
UC UC UC XC XC XC XC XC VC VC VC
C
1300 745 826
VF
FINE
F
MEDIUM
M
COARSE
C
VERY COARSE
VC
EXTRA COARSE
XC
ULTRA COARSE
UC
Droplet size classifications are
based on BCPC specifications and
in accordance with ASAE Standard
S-572 at the date of printing.
Classifications are subject to change.
DG Teejet
AI Teejet and AIC Teejet
3
VERY FINE
HCC Spray-Jet
AIXR Teejet
1.5
DROPLET SIZE COLOUR REFERENCE
TTJ60-110025
TTJ60-11005
1
KEY
4
F
F
F
M
M
M
C
C
VF
F
F
F
F
F
M
M
M
BAR
BAR
1.5
3.5
F
F
F
M
M
M
C
C
VF
F
F
F
F
F
M
M
M
Turbo Twinjet (TTJ60)
Turbo Teejet Induction (TTI)
1
3
F
F
F
M
M
M
C
C
F
F
F
F
F
M
M
M
M
1
TT11001
QJ90-2XTT11001
TT110015
QJ90-2XTT110015
TT11002
QJ90-2XTT11002
TT110025
QJ90-2XTT110025
TT11003
QJ90-2XTT11003
TT11004
QJ90-2XTT11004
TT11005
QJ90-2XTT11005
TT11006
QJ90-2XTT11006
TT11008
QJ90-2XTT11008
www.silvan.com.au
1.5
2
2.5
3
3.5
DG80015
DG8002
DG8003
DG8004
DG8005
DG110015
DG11002
DG11003
DG11004
DG11005
2
M
C
C
C
C
M
M
C
C
C
BAR
3
M
M
M
M
C
F
M
M
M
C
2.5
M
M
M
C
C
F
M
M
C
C
3.5
M
M
M
M
M
F
M
M
M
M
4
F
M
M
M
M
F
M
M
M
M
IDK Lechler
BAR
4
4.5
5
5.5
6
1.5
2
2.5
3
4
5
6
C
C
C
M
M
M
F
C
M
M
M
F
F
F
F
F
F
F
IDK12001
IDKS8001
C
C
M
M
M
M
M
F
F
F
F
C
C
C
M
M
F
C
C
M
M
M
M
M
M
M
F
IDK120015
IDKS80015
C
C
VC
C
C
M
M
M
M
M
M
M
M
IDK12002
IDKS8002
C
C
C
C
M
M
F
VC
C
C
C
C
M
M
M
M
M
M
IDK120025
IDKS80025
VC
VC
C
C
C
M
M
XC
VC
C
C
C
C
C
C
M
M
M
IDK12003
IDKS8003
VC
VC
VC
C
C
M
M
XC
VC
VC
VC
C
C
C
C
C
M
M
XC
VC
VC
VC
C
C
C
C
C
C
M
IDK12004
IDKS8004
VC
VC
VC
VC
C
C
M
XC
XC
VC
VC
C
C
C
C
C
C
M
IDK12005
IDKS8005
VC
VC
VC
VC
C
C
M
65
Spraying Information
ISO STANDARD NOZZLE OUTPUT CHART FOR 80˚/110˚ NOZZLES
ISO
COLOUR
CODE
LIQ
PRES
BAR
CAPACITY
L/MIN.
FAN TIP
ORANGE
80-01
110-01
100 MESH
2.0
2.5
3.0
3.5
4.0
2.0
2.5
3.0
3.5
4.0
2.0
2.5
3.0
3.5
4.0
2.0
2.5
3.0
3.5
4.0
2.0
2.5
3.0
3.5
4.0
2.0
2.5
3.0
3.5
4.0
2.0
2.5
3.0
3.5
4.0
2.0
2.5
3.0
3.5
4.0
0.33
0.37
0.40
0.43
0.46
0.49
0.55
0.60
0.65
0.69
0.65
0.73
0.80
0.86
0.92
0.98
1.10
1.20
1.30
1.39
1.31
1.46
1.60
1.73
1.85
1.63
1.82
2.00
2.16
2.31
1.96
2.19
2.40
2.59
2.77
2.61
2.92
3.20
3.46
3.70
FAN TIP
GREEN
80-015
110-015
100 MESH
FAN TIP
YELLOW
80-02
110-02
50 MESH
FAN TIP
BLUE
80-03
110-SF-03
50 MESH
FAN TIP
RED
80-04
110-04
50 MESH
FAN TIP
BROWN
80-05
110-05
50 MESH
FAN TIP
GREY
80-06
110-06
50 MESH
FAN TIP
WHITE
80-08
110-08
50 MESH
APPLICATION RATE:LS PER HECTARE AT KM/H.
6
km/h
65
73
80
86
92
98
110
120
130
139
131
146
160
173
185
196
219
240
259
277
261
292
320
346
369
326
364
400
432
462
392
438
480
518
554
522
584
640
692
740
8
km/h
49
55
60
65
69
74
82
90
97
104
98
110
120
130
139
147
164
180
194
208
196
219
240
259
277
245
273
300
324
346
294
329
360
389
416
392
438
480
519
555
10
km/h
39
44
48
52
55
59
66
72
78
83
78
88
96
104
111
118
131
144
156
166
157
175
192
207
222
196
218
240
259
277
235
263
288
311
333
313
350
384
415
444
12
km/h
33
37
40
43
46
49
55
60
65
69
65
73
80
86
92
98
110
120
130
139
131
146
160
173
185
163
182
200
216
231
196
219
240
259
277
261
292
320
346
370
14
km/h
28
31
34
37
39
42
47
51
56
59
56
63
69
74
79
84
94
103
111
119
112
125
137
148
158
140
156
171
185
198
168
188
206
222
238
224
250
274
297
317
16
km/h
24
27
30
32
35
37
41
45
49
52
49
55
60
65
69
74
82
90
97
104
98
110
120
130
139
122
137
150
162
173
147
164
180
194
208
196
219
240
260
278
18
km/h
22
24
27
29
31
33
37
40
43
46
44
49
53
58
62
65
73
80
86
92
87
97
107
115
123
109
121
133
144
154
131
146
160
173
185
174
195
213
231
247
20
km/h
20
22
24
26
28
29
33
36
39
42
39
44
48
52
55
59
66
72
78
83
78
88
96
104
111
98
109
120
130
139
118
131
144
156
166
157
175
192
208
222
22
km/h
18
20
22
23
25
27
30
33
35
38
36
40
44
47
50
53
60
65
71
76
71
80
87
94
101
89
99
109
118
126
107
120
131
141
151
142
159
175
189
202
24
km/h
16
18
20
22
23
25
27
30
32
35
33
37
40
43
46
49
55
60
65
69
65
73
80
86
92
82
91
100
108
115
98
110
120
130
139
131
146
160
173
185
26
km/h
15
17
18
20
21
23
25
28
30
32
30
34
37
40
43
45
51
55
60
64
60
67
74
80
85
75
84
92
100
107
90
101
111
120
128
120
135
148
160
171
28
km/h
14
16
17
18
20
21
23
26
28
30
28
31
34
37
40
42
47
51
56
59
56
63
69
74
79
70
78
86
93
99
84
94
103
111
119
112
125
137
148
159
30
km/h
13
15
16
17
18
20
22
24
26
28
26
29
32
35
37
39
44
48
52
55
52
58
64
69
74
65
73
80
86
92
78
88
96
104
111
104
117
128
138
148
NOZZLE INTERCHANGE CHART
Nozzle Type
Teejet
Hardi
Croplands
Standard Flat Fan Nozzle
TP
-
-
Extended Range Flat Fan Nozzle
XR
-
-
Low Drift Flat Fan Nozzle
DG
-
-
Delavan
Lechler
Spray Int.
Albuz
F
LF
VP
LFR
ST
SF
API
LU
UF
LD
RF
AXI
AD
LD
ADI
Twinjet Flat Fan / *Inducted
TTJ60
-
-
-
-
-
-
*AVI-T
Air Inducted Flat Fan Nozzle
AI
INJET
DTDXL
DB, TD
-
ID
PNEUJET
AVI
Air Inducted low pressure
TTI
MINIDRIFT
AIRMIX
-
-
IDK
-
-
AIUB
-
AIRAIAIRMIX OCMIX
-
-
-
-
AVI-OC
Air Inducted Off Centre Nozzle
Extended Range Flat Fan in FC
-
-
TCP,TCC
-
-
-
-
-
OC
G150,B-JET
-
OC
LX
OC
-
OCI
Hollow Cone Nozzle
TX
1229
-
JCX
HB, HC
TR
HC
ATR
Wide Angle Flat Fan Nozzle
TK
4598
-
AN, DT
D
FT
DEF
APM
Off Centre Nozzle
66
Lurmak
Ferliser nozzle < 5 jets
SJ3
-
-
-
-
-
-
EXA
Ferliser nozzle > 5 jets
SJ7
-
-
-
-
-
-
ESI
1300 745 826
www.silvan.com.au
Terms and Conditions
Effective: 25/05/2012
AVAILABILITY
WARRANTY
Products within the Silvan Price List are available through authorised Silvan
dealers. Products within the Selecta Price List are available through authorised
Silvan and Selecta dealers.
The only warranty provided by Silvan is set out on the forms accompanying the
goods (for a copy please contact the Silvan Customer Service Centre). No other
warranty or representation is made by Silvan. The terms of Silvan’s warranties
are subject to the operation of any law including the Australian Consumer Law.
TERMS
Will be the Silvan terms and conditions set out in your individual trading terms
and as posted on our website www.silvan.com.au/terms from time to time.
CANCELLATIONS
PRICES
b.If the stock has been dispatched a restocking fee will apply.
All prices are suggested list prices in Australian dollars. Prices are subject to
change without prior notice. For stocking incentive programmes refer to your
individual trading terms, or contact our customer services staff on 1300 745 826.
2.Cancellations made after the day the order was placed, a restocking fee
will apply.
1.Cancellations made on the same day the order was placed:
a. If the stock has not been dispatched, no handling fee will apply;
RETURNS POLICY
GST
All prices are inclusive of GST unless otherwise stated. If GST is payable by you,
you will pay GST in addition to any invoiced amount or price unless the invoice or
price is stated to be GST inclusive.
1.Before returning any product to Silvan, a Return Authorisation (RA) Number
and approval form must be obtained from Silvan Customer Service by phoning
1300 745 826. Goods WILL NOT be accepted without an RA number and form.
2.All returns must be requested within 14 days of the invoice date.
FREIGHT CHARGES
3.Goods will only be accepted for credit if they are returned undamaged and in
saleable condition.
Prices are ex Silvan Distribution Centres in Melbourne, Brisbane, Perth. Check
with Silvan Customer Service for freight charges into your area. Freight and
handling charges will be added to the invoice amount.
4.Return freight will be paid by the Customer if the goods are returned at the
Customer’s volition, unless authorised by the Company in writing prior to
return of the goods.
5.All written claims must reference Silvan invoice numbers, and must be dated
and state the reason for the claim.
TITLE AND RISK
PPSA
Silvan may register a security interest over the goods as security for any
payment. You will need to provide Silvan with all information, documents and
consents as Silvan requires to register and maintain this security interest.
6.A restocking fee will be applied if the goods have been dispatched according
to the order.
7.Return of products valued under $50 nett inc GST will not be accepted if they
have been dispatched according to the order.
Returns may be requested on the Customer Claim Form on page 163 of the
Selecta Price List.
Silvan
Silvan retains title to all goods until paid for in full in clear funds. Risk in respect
of goods passes to you as soon as the goods leave the Silvan Distribution Centre.
CLAIMS
Pricing & Freight Claims need to be made within 14 days of the invoice date.
Any claims after this for pricing discrepancies will not be accepted.
MINIMUM ORDER VALUE
A $50 dealer (net GST) Minimum Order Value is required for standard orders.
Orders under the required minimum values will attract a $22 inc GST handling
charge. A $250 dealer (net GST) Minimum Order Value is required for orders of
Hardware products.
Urgent/breakdown orders do not have a required Minimum Order Value, and
attract a $22 inc GST priority fee.
Claims for Freight Damage need to be made within 14 days of the invoice date.
Please notify Silvan Customer Service by sending a Customer Claim Form
(page 163). Claims received after this will not be accepted.
DISCOUNT CODES
Please refer to individual Trading Terms for specific discounts.
FOR A FULL LIST OF TERMS & CONDITIONS, PLEASE VISIT WWW.SILVAN.COM.AU/TERMS
1300 745 826
www.silvan.com.au
67
The company reserves the right to change recommended prices and
specifications without notice. All items in this catalogue have been
included in good faith on the basis that the goods described were available
at the time this book was published. Failure of suppliers to deliver in
accordance with samples, descriptions, or at all, or other unintentional
causes may result in some lines being unavailable. Space may prevent
some dealers from stocking all items. All brand names and product names
used in this publication are trade names, registered trade marks, or
pending trade marks of their respective owners.
SILVAN AUSTRALIA PTY. LTD. ABN 48 099 851 144
Head Office: 244-264 Greens Road, Dandenong South, Victoria, Australia 3175
QLD. Office: Warehouse 2, 30 Gow Street, Moorooka, Queensland 4105
W.A. Office: 12 Cressall Road, Balcatta, Western Australia 6021
Freecall: 1300 SILVAN | Fax: 1800 SILVAN
Email: info@silvanaust.com | Web: www.silvan.com.au
COPYRIGHT © SILVAN AUSTRALIA PTY. LTD. 2014
For more information call 1300 745 826 or visit www.silvan.com.au
Reference No: 070-SIL-PL-14