REVISED JUNE 2013
SUPPLEMENTAL CATALOG
BULLETIN 5-53.36
APRIL 2013
Bracket, Cutout or Arrester
Assembled – Ready to install
Bracket mounts single cutout, arrester or cable terminator on crossarm
• Easy installation - Assembled bracket installs directly out of the box and onto crossarm
• Safety enhancement - Can be installed by crews with rubber gloves
• Improved fit - Bottom adjustment slot aids in snugging bolts to fit crossarm height
Features
• Direct replacement for NEMA B bracket applications
• No nuts to remove and reinstall
• No bracket to assemble
Material
Galvanized steel per ASTM A153
Catalog No.
PSC2060887
PSC2060937
Range of
Crossarm
Heights
Range of
Crossarm
Widths
Crossarm
Bolt
Length
4 1/8" to
5 5/32"
2 3/4" to 4"
5 1/2"
3 1/4" to 5 1/2"
7"
Extension
(Face of Arm to Center
of Mounting Bolt)
Material
Size
2.6"
1 3/4" x 1/4"
Approx.
Ship Wt.
per Each
2.9 lb.
3.1 lb.
Quick and easy three-step installation
Assembled bracket
removed from box
Bracket placed over the crossarm
Carriage bolt snugged up to
crossarm and nuts tightened
NOTE: Hubbell has a policy of continuous product improvement.
We reserve the right to change design and specifications without notice.
210 N. Allen St. • Centralia, MO 65240
©2013
Hubbell Incorporated                           Printed in USA
www.hubbellpowersystems.com