CUBICLES The easiest solution Impey cubicles can be quickly and easily installed with very little site preparation required. They are also the ideal solution for non-permanent adaptations. Each cubicle is purpose built to exact requirements with compact designs to accommodate a shower, hand rails and a shower seat, or larger sizes that contain a complete washroom, including a W/C and handbasin. Shower Toilet Cubicle with W/C and hand basin. 28 29 Cubicle planning and speciļ¬cations Step 1: Choose your cubicle Impey cubicles are available in 2 sided, 3 sided and Shower/Toilet Cubicle (STC) formats and in left or right hand configurations (left hand shown). Two sided cubicles Three sided cubicles Shower/Toilet Cubicle Particularly suitable for wheelchair access. Ideally suited for enclosed spaces which may not be suitable for side opening doors. • With option ‘H’ doors code: CUB2H (state left or right hand option) • With option ‘J’ doors code: CUB2J (state left or right hand option) • With option ‘K’ doors code: CUB3K • With option ‘G’ doors code: CUB3G For Shower/Toilet Cubicles, a 1500mm shower tray is required. You need to allow an additional 350mm width for the W/C support frame and cistern, which is mounted on the outside of the cubicle, behind an inspection panel. Can be supplied either left or right hand (left hand shown). • With option ‘K’ doors code: STC3K • With option ‘G’ doors code: STC3G Shower/Toilet Cubicles are supplied with a support frame to mount the wall hung w/c. A handbasin with mono block mixer tap is supplied as standard with Shower/Toilet Cubicles. Step 2: Choice of shower door Door options for two sided cubicles (left hand shown) 30 Door options for three sided cubicles (left hand shown) Option H Option J Option G Option K Two half height bi-fold doors meeting on the corner One bi-fold and single door meeting on the corner Two half bi-fold doors meeting in the middle Pair of doors meeting in the middle Step 3: Optional extras As optional extras, Impey cubicles can be specified with a roof panel, ceiling light/extractor fan and 3-sided cubicles can be specified with a half glazed side panel if required (please see options below). Cubicles are supplied with a white hand rail as standard (not shown). Trays, seats, shower and additional hand rails are not included and will need to be specified at the time of ordering. • Roof with light and fan code: STC/EXROOF • Roof only code: STC/ROOF • Half glazed side panel code: no additional cost. Specify when ordering. Step 4: Choice of shower tray There are two styles of shower tray to choose from. For full details please see pages 14-17. Slimline 35 Shower trays Mendip Shower trays with above the floor drainage Only 35mm high to provide easy access and there is also a sloping ramp kit available which is ideal for wheelchairs. For full details please see page 16. For situations where the drainage cannot be recessed into the floor we offer the Mendip range of trays. The drainage is housed in the base of the tray. These are also available with a sloping ramp, or half height step for easier access. For full details please see page 17. Sizes: 1200 x 750mm 1200 x 900mm 1300 x 750mm 1500 x 750mm* Sizes: 1250 x 710mm 1250 x 830mm 1500 x 710mm* 1500 x 830mm* * required for Shower/Toilet Cubicles If you have any questions regarding which cubicle and sizes are most suitable for your needs please call our sales team on 01460 256 090 Guaranteed quality and durability The cubicles are manufactured from durable waterproof panelling to provide a tough, easy clean finish. Each cubicle construction, including the doors and shower tray, is covered by our lifetime guarantee* (excludes door seals which are guaranteed for 5 years). All other fixtures and fittings are subject to manufacturers guarantees. *For full details of lifetime guarantee see back cover. 31