Contact the Nicholson Service Department for proper selection of inserts for your application.
Fiberguard is patented. Fiberguard is a registered Nicholson trademark.
INSERT TYPE: A
INSERT TYPE: SPIKE
INSERT TYPE: D
INSERT TYPE: DIMPLED
SPIKE AND SPIKELESS INSERT APPLICATION
INSERT TYPE: SPIKELESS
EXPERT NICHOLSON SALES SUPPORT NEAR YOU:
NICHOLSON MANUFACTURING LTD. 9896 GALARAN ROAD, P.O. BOX 2128 SIDNEY, BC CANADA V8L 3S6
TEL: 250-656-3131 FAX: 250-656-3111 SEND WORLD WIDE EMAIL TO: forestsales@nmbc.com SEE OUR WEBSITE AT: www.debarking.com
The manufacturer reserves the right to make changes or add improvements at any time without incurring any obligation to make changes on machines manufactured previously.
Actual product may vary from photograph, illustration and description.
File: Fiberguard Sales Broch 22MAR2007.p65
Send Worldwide Email to: forestsales@nmwa.com
See Our Website at: http://www.debarking.com
“I can’t believe how much smoother the debarker runs!”
“Logs feed much better and without slippage.”
“Log centering is much more reliable and smooth.”
“No more spinning logs!”
“We are using less air, this saves us $125.00 (US)
per month on electricity”
“16 hours to resurface, or 29 hours to replace flutes;
now we change all 24 inserts in 2 hours!”
“We have been using Fiberguard rolls since January,
and won’t replace inserts until September!”
“A full 1 percent improvement in reduced defects
gives us $280,000.00 (US) more revenue per year”
“OUR FIBERGUARD SYSTEM IS REPAYING THE
ORIGINAL INVESTMENT 12 TIMES EVERY YEAR!”
TYPE ‘D’ FIBERGUARD FEEDROLL INSERTS AFTER 7.5 MONTHS OF 2 AND 3 SHIFT HARDWOOD SAWMILL OPERATION: NICHOLSON 27 INCH DEBARKER.
TYPE ‘B’ INSERTS
SAVE VALUABLE WOOD FIBER ON EVERY LOG WITH
NICHOLSON FIBERGUARD FEEDROLLS!
REBUILD YOUR FEEDROLLS DURING NORMAL MAINTENANCE.
INSTALL INSERTS SAFELY WITHOUT REMOVING THE FEEDROLLS.
UP TO 35% PROVEN REDUCTION IN CLAMPING FORCES.
LOWER CLAMPING FORCES SAVE FIBER, AIR AND ELECTRICITY.
GET MORE HIGH VALUE SURFACE FIBER FROM EACH LOG.
QUICKLY CHANGE INSERTS FOR FROZEN WOOD.
QUICKLY CHANGE INSERTS AS YOUR LOG SUPPLY CHANGES.
REBUILD FEEDROLLS UP TO 8 TIMES FASTER.
REBUILD YOUR FEEDROLLS WITH A WRENCH.
NO CUTTING, WELDING OR ALIGNMENT JIGS EVER AGAIN!
AVAILABLE FOR 12, 17, 22, 27, 31, 35 AND 44 INCH DEBARKERS.
CALL US TODAY AND DISCUSS YOUR APPLICATION!