Verge Wall Row Configurations RC-7608 Module Lengths T5/T5HO lamp versions Row Configurations Verge wall systems are available in nominal 4ft and 8ft modules. Exact overall module lengths are shown to the right (without endcaps). 4ft The tables below indicates how nominal 4ft and 8ft modules can be combined to create continuous rows of various lengths. Modules can be combined in any order. 3' 10-1/2" 8ft 7' 9" Note:T5/T5HO and T8 lamp versions are different lengths. See Table A for T5/T5HO versions and Table B for T8 lamp versions. Table A: T5/T5HO lamp versions Indicates overall nominal length of module. Module lengths do not include endcaps. Endcap dimensions are shown below. T8 lamp versions Nominal Row Length 4ft 4' 0" 4' 8ft 4' 8'-1/2" 20' Overall row lengths do not include endcaps. Add two endcaps to the overall length of each row. 8' 1x 1x 11' 7-1/2" 12' 2x 15' 6" 16' 1x 2x 19' 4-1/2" 20' 3x 23' 3" 24' 1x 3x 27' 1-1/2" 28' 4x 31' 0" 32' 4x 34' 10-1/2" 36' 5x 38' 9" 40' 1x 44' • Variable wall mount brackets can be positioned within 2”-4” of fixture end or joint. 1x 5x 42' 7-1/2" 44' 6x 46' 6" 48' 6x 50' 4-1/2" 52' 7x 54' 3" 56' 1x 7x 58' 1-1/2" 60' 8x 62' 0" 64' 1x 8x 65' 10-1/2" 68' 9x 69' 9" 72' 9x 73' 7-1/2" 76' 10x 77' 6" 80' 10x 81' 4-1/2" 84' 11x 85' 3" 88' 48' 52' • Maximum distance between mounts is 48” 1x 56' 60' 64' 68' 72' 76' 1x 80' 84' 88' ! 1x ATTENTION: Install in accordance with national and local building and electrical codes. © 2013 Philips Ledalite Phone: 604.888.6811 Fax: 800.665.5332 ledalite.com Number of Modules Required 4' 4' 40' Mount Spacing endcaps) 3' 10-1/2" 32' 36' Nominal Row Length 7' 9" 24' 28' Installed Row Length ( not including 1x 16' 2-3/16" 8' 1x 8' 12' Endcaps Number of Modules Required Table B: T8 lamp versions 8' 1x 1x 1x 1x 1x 1x 1x 1x 1x 1x 1x Installed Row Length ( not including endcaps) 4' 0" 1x 8'-1/2" 1x 12'-1/2" 2x 16' 1" 2x 20' 1" 3x 24' 1-1/2" 3x 28' 1-1/2" 4x 32' 2" 4x 36' 2" 5x 40' 2-1/2" 5x 44' 2-1/2" 6x 48' 3" 6x 52' 3" 7x 56' 3-1/2" 7x 60' 3-1/2" 8x 64' 4" 8x 68' 4" 9x 72' 4-1/2" 9x 76' 4-1/2" 10x 80' 5" 10x 84' 5" 11x 88' 5-1/2" Page 1 RC_Wall_76.pdf 0313 Verge Wall Row Configurations RC-7608 Power Feed Emergency Circuit (EM), Night Light (NL) and Battery Pack (BP) placement in rows Power for the entire row can be placed at either end or any joint. See examples below. Placement of EM/NL/BP modules is variable throughout a row. See examples below of EM/NL/BP installed in 20ft rows. = Power mount Example A 4' 8' EM/NL/BP = Non-power mount Example A 4' 8' IMPORTANT: Whenever longer rows are made up of both 4' and 8' modules, EM/NL/BP sections will always be installed in 8' modules. If specific site restrictions require EM/NL/BP sections to be installed in 4' sections, please contact the factory. 8' -ORExample B 4' 8' NOTE: Each row will be supplied standard with a power mount and a 4 conductor power cord*. 18/4 conductor AWM power cord: Example C 4' 8' EM/NL/BP Example B 8' 8' EM/NL/BP Example C 8' 8' Max. 10 amps Max. 600V Good for 2 circuit feeds or a 1 circuit feed with a NL/BP hot lead. 4' -OR- 4' Power feeds for rows installed with Night Light (NL) or Battery Pack (BP) Every NL/BP module will be supplied with an additional 4 conductor power cord and power mount to enable variable power locations, as shown in the examples below. For NL and BP installation, power can be installed adjacent to normal power or in a separate location. Emergency Circuit (EM), Night Light (NL) or Battery Pack (BP) Option Modules are available with optional EM/NL circuit or BP. EM/NL/BP each power one 4ft end section of a module. EM/NL/BP sections will always be installed on the right side (when facing wall). See examples A and B below. Example A 2 power drops 8' 8' 8' = Power mount, normal -ORExample B 1 power drop 4ft module NL/BP 4' = Power mount, NL/BP NL/BP 4' 8' 8' = Non-power mount 8' EM/NL/BP Power feeds for rows installed with Emergency Circuit (EM) Every EM module will be supplied with an additional 4 conductor power cord and power mount to enable variable power locations, as shown in the example below. 8ft module For EM installation, in all instances, code restrictions require two separate power drops, one for normal power and one for EM power. EM power must be installed adjacent to the EM module. See example A below. EM/NL/BP Example A 2 power drops = Power mount, normal EM 4' 8' 8' Thru-wiring for EM circuit is not permitted. ! ATTENTION: Install in accordance with national and local building and electrical codes. © 2013 Philips Ledalite Phone: 604.888.6811 Fax: 800.665.5332 ledalite.com 8' = Power mount, EM = Non-power mount Page 2 RC_Wall_76.pdf 0313