Verge
Row Configurations
Suspended
Module Lengths
Verge suspended systems are available in nominal
4ft and 8ft modules. Exact overall module lengths
are shown to the right (without endcaps).
RC-7606
Row Configurations
4ft
4'-3/16"
Indicates overall nominal length of module.
Module lengths do not include endcaps.
Endcap dimensions are shown below.
8ft
The table below indicates how nominal 4ft and 8ft modules can be
combined to create continuous rows of various lengths. Modules can be
combined in any order.
8'-3/8"
Nominal
Row Length
Endcaps
Number
of Modules
Required
4'
2-3/16"
4'
Overall row lengths do not include endcaps. Add
two endcaps to the overall length
of each row.
1x
8'
12'
1x
16'
20'
Mount Spacing
24'
For on-grid T-bar ceiling installations, mounts attach directly to Tee. For non-accessible ceilings
and off-grid T-bar installations, the graphic below indicates mount spacing for typical row lengths.
Mounting options are also available for a wide variety of other ceiling types. See Suspended
Mounting Options document for more detailed information.
28'
1x
1x
32'
36'
1x
40'
44'
3' 11"
4ft
8ft
7' 11-3/16"
12ft
Indicates mounting location
7' 11-3/16"
20ft
24ft
28ft
32ft
52'
1x
56'
4'-3/16"
60'
8'-3/8"
7' 11-3/16"
16ft
1x
48'
7' 11-3/16"
4'-3/16"
1x
64'
68'
8'-3/8"
7' 11-3/16"
8'-3/8"
8'-3/8"
7' 11-3/16"
8'-3/8"
8'-3/8"
7' 11-3/16"
8'-3/8"
8'-3/8"
1x
72'
76'
1x
80'
4'-3/16"
8'-3/8"
84'
1x
88'
92'
1x
96'
100'
!
ATTENTION: Install in accordance with national and local building and electrical codes.
© 2013 Philips Ledalite
Phone: 604.888.6811
Fax: 800.665.5332
ledalite.com
8'
1x
Installed Row
Length
( not including
endcaps)
4'-3/16"
1x
8'-3/8"
1x
12'-9/16"
2x
16'-3/4"
2x
20'-15/16"
3x
24' 1-1/8"
3x
28' 1-5/16"
4x
32' 1-1/2"
4x
36' 1-11/16"
5x
40' 1-7/8"
5x
44' 2-1/16"
6x
48' 2-1/4"
6x
52' 2-7/16"
7x
56' 2-5/8"
7x
60' 2-13/16"
8x
64' 3"
8x
68' 3-3/16"
9x
72' 3-3/8"
9x
76' 3-9/16"
10x
80' 3-3/4"
10x
84' 3-15/16"
11x
88' 4-1/8"
11x
92' 4-5/16"
12x
96' 4-1/2"
12x
100' 4-11/16"
Page 1
RC_Suspended_76.pdf
0313
Verge
Suspended
Row Configurations
RC-7606
Power Feed
Emergency Circuit (EM), Night Light (NL) and Battery Pack (BP) placement in rows
Power for the entire row can be placed at either end or any joint. See examples below.
Placement of EM/NL/BP modules is variable throughout a row. See examples below of EM/NL/BP installed in 20ft rows.
= Power mount
Example A
4'
8'
EM/NL/BP
= Non-power mount
Example A
4'
8'
IMPORTANT: Whenever longer
rows are made up of both 4' and
8' modules, EM/NL/BP sections
will always be installed in 8'
modules. If specific site restrictions
require EM/NL/BP sections to
be installed in 4' sections, please
contact the factory.
8'
-ORExample B
4'
8'
NOTE: Each row will be supplied standard
with a power mount and a 4 conductor
power cord*.
18/4 conductor AWM power
cord:
Example C
8'
Max. 600V
Good for 2 circuit feeds or a
1 circuit feed with a NL/BP
hot lead.
Emergency Circuit (EM), Night Light (NL) or Battery Pack (BP)
Option
Modules are available with optional EM/NL circuit or BP. EM/NL/BP each power one 4ft end
section of a module. To vary placement in a row, modules installed with EM/NL/BP can be
reversed 180º as shown below in the 4ft and 8ft modules.
8'
EM/NL/BP
Example C
8'
8'
4'
Power feeds for rows installed with Night Light (NL) or Battery Pack (BP)
Every NL/BP module will be supplied with an additional 4 conductor power cord and power mount to enable variable
power locations, as shown in the examples below.
For NL and BP installation, power can be installed adjacent to normal power or in a separate location.
See examples A and B below.
Example A 2 power drops
NL/BP
4'
8'
8'
8'
= Power mount, normal
-ORExample B 1 power drop
4ft module
4'
-OR-
Max. 10 amps
4'
8'
EM/NL/BP
Example B
= Power mount, NL/BP
NL/BP
4'
8'
8'
= Non-power mount
8'
EM/NL/BP
Power feeds for rows installed with Emergency Circuit (EM)
Every EM module will be supplied with an additional 4 conductor power cord and power mount to enable
variable power locations, as shown in the example below.
8ft module
-OREM/NL/BP
EM/NL/BP
For EM installation, in all instances, code restrictions require two separate power drops, one for normal power and
one for EM power. EM power must be installed adjacent to the EM module. See example A below.
Example A 2 power drops
= Power mount, normal
EM
4'
8'
8'
Thru-wiring for EM circuit is not permitted.
!
ATTENTION: Install in accordance with national and local building and electrical codes.
© 2013 Philips Ledalite
Phone: 604.888.6811
Fax: 800.665.5332
ledalite.com
8'
= Power mount, EM
= Non-power mount
Page 2
RC_Suspended_76.pdf
0313