TSI BravO HC
2.5kVA / 230Vac
The TSI Bravo HC inverter system is specially designed to cater to air conditioning unit, typically in telecom shelters, or
motor loads.
The TSI Bravo HC is a single phase Inverter with two operational modes called Online mode (DC to AC) and EPC mode
(AC to AC), providing conditioned power with very high efficiency.
System Description
„„ The TSI Bravo HC is a 48VDC/230VAC inverter built in 19” reggudized sub-rack as per telecom standard
„„ Its massive power density provides up to 5KVA in a 2U package, or up to 10 kVA in two racks (4U).
„„ The use of the TSI technology* allows the systems to operate at up to 96% efficiency and to have a seamless
transfer between the primary and secondary sources.
„„ The TSI Bravo HC is able to provide 330% overload for a period of 900ms
„„ The Inverter has dual (AC & DC) inputs, and has a Static Transfer Switch Function built-in.
„„ Terminal Blocks for ACin, ACout & DCin located in Front.
„„ Rack mounting option with additional fixing bracket and back end support for 19” Rack
„„ Wall mountable without additional kits.
„„ The TSI Bravo HC system is CE marked according to IEC/EN 60950:1, IEC/EN62040 and also complies with
EMC Class A.
* for more information about the TSI Technology, please visit http://www.cet-power.com/en/tsi or scan this
TSI Bravo HC – Datasheet – v1.0
www.cet-power.com
TSI BravO HC
2.5kVA / 230Vac
GENERAL
DC INPUT SPECIFICATIONS
„„
EMC (immunity)
EN 61000-4-3,6
„„
Nominal voltage (DC)
48 V
„„
EMC (emission)
EN 55022 (Class A)
„„
Voltage range (DC)
40 - 60 V
„„
Safety
EN 60950-1 EN 62040-1,2
„„
Nominal current (at 40Vdc)
n x 56 A
„„
Cooling
Forced
„„
Maximum input current (for 15 second) n x 84 A
„„
Isolation
Doubled
„„
Voltage ripple
„„
MTBF
240000 hrs
„„
Input voltage boundaries user selectable
„„
Efficiency (Typical)
„„
Enhanced Power Conversion
96%
„„
On Line91%
< 2mV
AC INPUT SPECIFICATIONS
„„
Nominal voltage (AC)
True Redundant Systems
Compliant
3 disconnection levels on ACout and DCin power ports
4 disconnection levels on ACin port
„„
Voltage range (AC) 150 – 265 V
Brownout150 to 185 V
1784 W @150V
„„
RoHSCompliant
„„
Conformity rangeAdjustable
„„
Connection I/O
Terminal block
Protected against inversion of polarity
„„
Power Factor>99%
„„
Frequency range (selectable)
Self adaptive to wide operating conditions and
comprehensive table of troubleshooting codes
„„
Synchronization range
47 – 53 Hz
57 – 63 Hz
„„
Dielectric strength DC/AC
„„
„„
4300Vdc
AC OUTPUT POWER
„„
Nominal Output power n x 2500 VA
„„
Output power (resistive load) n x 2000 W
„„
Short time overload capacity 150% 15 second
300% 900msec
„„
Permanent overload capacity 110%
„„
Admissible load power factor
Full power rating from 0 inductive to 0 capacitive
„„
Internal temperature management and switch off
TSI Bravo HC – Datasheet – v1.0
www.cet-power.com
230 V
50 - 60 Hz
TSI BravO HC
2.5kVA / 230Vac
AC OUTPUT SPECIFICATIONS
SIGNALING & SUPERVISION
„„
Nominal voltage (AC) (*)
230 V
„„
DisplaySynoptic LED
„„
Voltage range (AC)
200 – 240 V
„„
Alarms output
Dry contacts on shelf
„„
Voltage accuracy
2%
„„
Supervision Use optional devices
„„
Frequency
50 - 60 Hz
„„
Frequency accuracy
0.03 %
„„
Total harmonic distortion
(resistive load)
<1.5 %
„„
Width19inch
„„
Load impact recovery time
0.4 ms
„„
Depth510mm
„„
Turn on delay
40 s
„„
Height
„„
Nominal current
Protected against reverse current
n x 10.9 A
„„
Weight
„„
Crest factor at nominal power
3.1 In
Short circuit clear up capacity 10 x In for 20msec
Available while Mains is available at AC input port
With magnitude control and management
„„
Short circuit current after clear up capacity 2.1 In
„„
Short circuit current after 15 sec
WEIGHT & DIMENSIONS
„„
„„
Module (Max 4) 4.5Kg
„„
Shelf W/O Modules 7.0Kg
Material (casing)
1.5 In
TRANSFER PERFORMANCES
„„
Maximum voltage interruption
0s
„„
Total transient voltage duration (max)
0s
ENVIRONMENT
„„
Altitude above sea without derating „„
Derating slope upper than 1500m 0,8% by 100m
„„
Ambient temperature-
20 to 50 °C
„„
Storage temperature-
40 to 70 °C
„„
Relative humidity
2U & 4U
<1500 m
95% , non condensing
TSI Bravo HC – Datasheet – v1.0
www.cet-power.com
Coated steel
TSI BravO HC
2.5kVA / 230Vac
TSI Bravo HC – Datasheet – v1.0
www.cet-power.com
TSI BravO HC
2.5kVA / 230Vac
How to order
Each inverter module provides 2500VA/2000W running power and 330% short term overload for a period of 900ms (start up)
followed by a 150% overload for 14 seconds.
Max two (2) inverters per shelf & Max two (2) shelves per system
Product Code description:
Product Code
Model Name
Description
Nom. Output Power
Startup (900ms)
Overload (15s)
S32H73E0102S
TSI Bravo HC 2500VA
1 shelf + 1 Module
- no T2S - Alarm
Contact
2.5kVA / 2kW
8.25kVA / 6.6kW
3.75kVA / 3kW
S32H73E0202S
TSI Bravo HC 5000VA
1 shelf + 2 Module
- no T2S - Alarm
Contact
5kVA / 4kW
16.5kVA / 13.2kW
7.5kVA / 6kW
S32H73E0304S
TSI Bravo HC 7500VA
1 shelf + 3 Module
- no T2S - Alarm
Contact
7.5kVA / 6kW
24.75kVA / 19.8kW
11.25kVA / 9kW
S32H73E0404S
TSI Bravo HC
10000VA
1 shelf + 4 Module
- no T2S - Alarm
Contact
10kVA / 8kW
33kVA / 26.4kW
15kVa / 12kW
S32G73E0102S
TSI Bravo HC 2500VA
1 shelf + 1 Module
+ 1 T2S
2.5kVA / 2kW
8.25kVA / 6.6kW
3.75kVA / 3kW
S32G73E0202S
TSI Bravo HC 5000VA
1 shelf + 1 Module
+ 1 T2S
5kVA / 4kW
16.5kVA / 13.2kW
7.5kVA / 6kW
S32G73E0304S
TSI Bravo HC 7500VA
1 shelf + 1 Module
+ 1 T2S
7.5kVA / 6kW
24.75kVA / 19.8kW
11.25kVA / 9kW
S32G73E0404S
TSI Bravo HC
10000VA
1 shelf + 1 Module
+ 1 T2S
10kVA / 8kW
33kVA / 26.4kW
15kVa / 12kW
„„
„„
Warranty options: change the position 7 “E” to
„„
“F” for 3 years warranty
„„
“G” for 4 years warranty
„„
“H” for 5 years warranty
To have “Soft-Start” inrush on DC (not CE marked!) change the ending “S” to “C”
TSI Bravo HC – Datasheet – v1.0
www.cet-power.com