DX8210 IDENTIFICATION DX8210 is Datalogic’s new high performance laser bar code reader purpose built to offer to offer top reading performance combined and ease of use to End User and System Integrators specialized in the Transport and Logistics market. Thanks to its unique design, DX8210 offers an ALL-IN-ONE solution for omnidirectional reading stations. This single device is capable of reading codes at any orientation on the conveyor. With the benefits of state-of-the-art technology and innovative optic design, DX8210 can cover a wide conveyor and large depth of field to satisfy demanding applications. A high scan rate (2000 scans/sec) allows DX8210 to work perfectly on high speed conveyors for mass production. Thanks to its ALL-IN-ONE architecture, DX8210 offers unmatchable ease of installation and ease of use. In just a few minutes, readers can be installed above the conveyor and the onmi-station is ready to work. The innovative DST (Digital Signal Technology) drastically increases optic performance even in cases where code quality is unpredictable. DST offers stable and constant performance under any working conditions to ensure logistic operators maintain timely deliveries. Multi-headed tunnel configurations are perfectly managed with EBC (Ethernet Bus Connection), allowing high speed data transmission and real time signal synchronization inside the system. EBC allows redundant configuration, assuring no system deadlock in case of component failure. all-inONE X pattern Ease of use, automatic setup and system diagnostics are perfectly satisfied thanks to e-GENIUS, the web browser configuration tool that allows you to access the system with a standard web-browser program with no need for specific configuration software. HIGHLIGHTS •ALL-IN-ONE architecture offering outstanding ease of use and ease of installation •Single device offering 900x900 mm (36x36 in) omnidirectional reading area •High scan rate (2000 scans/sec) provides top results on high speed conveyors and in mass production environments •Excellent performance on low quality code and unpredictable reading conditions •Unmatchable ease of use and ease of installation •DST (Digital Signal Technology) offering stable and constant performance under any operative conditions •ASTRA G3 technology offering superior DoF and FoV without mechanical autofocus •Ethernet Bus Connections (EBC) for high speed data transmission and real time synchronization •Fully redundant configuration and no single point of failure •e-GENIUS web browser programming tools •Ease of maintenance and automatic replacement GENIUS TARGET MARKETS AND APPLICATIONS 1.Airport Baggage Handling 2. Parcel Sorting 3.Retail Distribution Center 4. Loading/Unloading System 5.Shop Floor and Manufacturing 6.Automatic Warehousing Management www.datalogic.com DX8210 TECHNICAL SPECIFICATIONS 8 8 7 Reading Distance (Min/Max) 600-1850 mm (23-72 in) Max Resolution Min:0.25mm (10mils)/Max: 1.0mm (40mils) Scan Rate Typ: 1000scans/s/ Max Scan Pattern Type X-Pattern Aperture Angle 60 degrees Multilabel Reading Up to 10 different symbologies during the same reading phase Optic Architecture/Technology ASTRA G3 Bar Code Assignment Technology PackTrack™ G2 Reconstruction Code Technology ACR G5 Readable Codes 22 symbologies including 2/5 family, Code39,Code93,Code128,EAN/UPC,EAN128,ISBN128 Case Material Aluminum alloy Dimensions (Typical Value) 381 x 328 x 92.5 mm [15 x 13 x 3.6 in] Weight 7.7 kg (17 lb) Temperature Range 0° - 50° C Power Supply / Consumption 20 to 30 VDC; 20 W IP rating IP65 Ethernet 2 x Ethernet TCP/IP Serial Interfaces Main Port: RS232 / RS422 up to 115.2 Kbit/s Auxiliary Port: RS232 up to 115.2 Kbit/s Internal Communication System EBC Technology Fieldbus Embedded EtherNet/IP; PROFINET-IO and PROFIBUS-DP supported 7 Digital Inputs 3 x Inputs (2 + 1 x “Encoder”), optocoupled, NPN/PNP Digital Outputs 2 x Outputs SW programmable, optocoupled, event driven, NPN Device Programming 7 6 6 6 5 5 5 4Multilanguage, 4 browser-based, on board web server interface 4 3 3 HTML 3 2 2 TES: MATE APPROXIMATE S, 7.7KG WEIGHT: 17.0LBS, WEIGHT: 7.7KG 17.0LBS, 7.7KG SEE ER CHART COVERAGE READ FOR CHART SCANNER DIMENSIONS. FOR SCANNER COVERAGE COVERAGE DIMENSIONS. DIMENSIONS. REFERENCE CE DRAWINGS: DRAWINGS: 7400608 10 SY,SCANASY,SCAN HEAD,DX8210 HEAD,DX8210 DR0800106 DX8210 6 DIAGRAM,INSTALL,DX8210 DIAGRAM,INSTALL,DX8210 REV 01 RELEASE MECHANICAL DRAWINGS 384.00 15.118 2 1 REVISION BY CHANGE CHANGE AMG REV CHANGE REV 01 RELEASE 01 RELEASE 1 1 REVISIONREVISION BY D AMG 17D A DATE 17DEC2014 H 384.00 15.118 384.00 15.118 G 0 12.913 328.00 12.913 328.00 12.913 F 90.00 3.543 90.00 3.543 90.00 3.543 3X 3X 0.488 5.00 0.197 12.40 5.003X 0.1975.00 12.40 0.197 0.488 12.40 0 12.00 0.472 12.00 12.00 0.4 M6X1.0 - 6H M6X1.0 - 6H M6X1.0 - 6H0.472 READ DISTANCE REFERENCE READ DISTANCE POINT READ DISTANCE REFERENCE REFERENCE POINT POINT E 90 BEAM PATTERN SEE NOTE 2 90 90 BEAM PATTERN BEAM PATTERN SEE NOTESEE 2 NOTE 2 128.00 5.039 150.00 5.906 128.00 5.039 128.00 5.039 150.00 5.906 150.00 5.906 D MODELS MODEL DESCRIPTION PART NUMBER DX8210-2100 Standard Resolution 936300001 DX8210-4100 Standard Resolution Extended 936300003 DX8210-4200 High Resolution Extended 936300004 C B PART NO. METRIC METRIC METRIC DR0800105 PART NO.PARTDR0800105 NO. DR0800105 UNLESS OTHERWISE SPECIFIED ORUNLESS OTHERWISE UNLESS SPECIFIED OTHERWISE SPECIFIED DRAWN DRAWN DATE ALL MATERIALS IN THIS COMPONENT OR ALL MATERIALS INALL THIS MATERIALS COMPONENT IN THIS ORCOMPONENT DIMENSIONS ARE MILLIMETERS DIMENSIONS ARE DIMENSIONS IN MILLIMETERS ARE IN [INCHES] MILLIMETERS [INCHES] ASSEMBLY ARE TO BE COMPLIANT WITH ASSEMBLY ARE TO ASSEMBLY BE COMPLIANT ARE TO WITH BEIN COMPLIANT WITH[INCHES] ALL ANGLES ARE 2011/65/EU. 90° ALL ANGLES ARE ALL 90°ANGLES ARE 90° THE RoHS DIRECTIVE 2011/65/EU. THE RoHS DIRECTIVE THE 2011/65/EU. RoHS DIRECTIVE REMOVE BURRS AND SHARP EDGES REMOVE BURRS REMOVE AND SHARP BURRS EDGES AND SHARP EDGES DATE CHKD CHKD AMA DATE DATE 04SEP2013AMADRAWN 04SEP2013 04SEP2013 AMA THIS DOCUMENT IS PROVIDED FORTHIS A DOCUMENT THIS IS PROVIDED DOCUMENT FOR IS PROVIDED A FOR A TOLERANCES: TOLERANCES:ENGR TOLERANCES: SPECIFIC PURPOSE AND THE DISCLOSED SPECIFIC PURPOSE SPECIFIC AND PURPOSE THE DISCLOSED AND THE DISCLOSED DATE 12 MM PROPERTY. MM [INCHPROPERTY. [INCH [INCH ANGULAR MM ANGULAR AMA INFORMATION REMAINS OUR PROPERTY. INFORMATION INFORMATION REMAINS OUR REMAINS OUR X±2.500 X±2.500 [.X±.1000] [.X±.1000] [.X±.1000] X±1.00° IT MAY NOT BE DISCLOSED, COPIED, IT MAY NOT BE IT DISCLOSED, MAY X±2.500 NOT BE COPIED, DISCLOSED, COPIED, X±1.00° .X±0.500 .X±0.500 DEPT. .X±0.500 [.XX±.0200] [.XX±.0200] [.XX±.0200] .X±0.10° OR REPRODUCED, EXCEPT FOR THE OR REPRODUCED, OR REPRODUCED, EXCEPT FOR THE EXCEPT FOR THE .X±0.10° MECH[.XXX±.0050] ENG .XX±0.130 .XX±0.130 .XX±0.130 [.XXX±.0050] [.XXX±.0050] .XX±0.01° .XX±0.01° SPECIFIC PURPOSE, WITHOUT ACCU-SORT’S SPECIFIC PURPOSE, SPECIFIC WITHOUT PURPOSE, ACCU-SORT’S WITHOUT ACCU-SORT’S .XXX±0.013 .XXX±0.013 .XXX±0.013 [.XXXX±.0005] [.XXXX±.0005] [.XXXX±.0005] PRIOR APPROVAL. THIS NOTICE MUST PRIOR APPROVAL. PRIOR THIS APPROVAL. NOTICE MUST THIS NOTICE MUST APPEAR ON ANY COPY OR REPRODUCTION APPEAR ON ANY APPEAR COPYON OR ANY REPRODUCTION COPY OR REPRODUCTION EN/A OF THIS DOCUMENT. OF THIS DOCUMENT. OF THIS DOCUMENT. C C 2010 DATALOGIC AUTOMATIONC 2010 DATALOGIC 2010 AUTOMATION DATALOGIC AUTOMATION CUSTOMER The company endeavours to continuously improve and renew its products; for this reason the technical data and contents of this catalogue may undergo variations without prior notice. For correct installation and use, the company can guarantee only the data indicated in the instruction manual supplied with the products. Product and Company names and N/A logos referenced may be either trademarks or registered trademarks of their respective companies. We reserve the right to make modifications and improvements. CONTRACT # 8 8 7 7 7 6 6 6 5 5 5 4 4 4 3 3 3 N/A 2 DATE CHKD DATE Rev. 00, 03/2015 511 SCHOOLHOUSE RD TELFORD, PA 51118969 SCHOOLHOUSE 511 SCHOOLHOUSE RD TELFORD, PA RD 18969 TELFORD, PA 18 DATE DATE ENGR ENGR Nov 2012 12 Nov 2012 12 Nov 2012 ANGULAR AMA AMA X±1.00° DIAGRAM,MECH SPEC, DIAGRAM,MECH DIAGRAM,MECH SPEC, SPEC, .X±0.10° DEPT. DEPT. A MECH ENG .XX±0.01°MECH ENG DX8210 DX8210 DX8210 EEN/A N/A CUSTOMER www.datalogic.com CUSTOMERCAGE CODE SIZE N/A N/A D 53830 CONTRACT # CONTRACT # N/A NONE N/A SCALE 2 DWG SIZE NO. D CAD SCALE SYS. 2 CAGE SIZE CODE CAGE DWG CODE NO. DWG NO. 53830 D DR0800105 53830 DR0800105 DR080 SCALE NONE CAD SYS.1 SOLIDWORKS CAD SHEET SHEET SOLIDWORKS NONE OF SYS.1 SOLIDWORKS 1 1 1 1 SHE O