Overall Dimension
12-3/4"
(324mm)
1/4"
(6mm)
Cutout Dimension
12-1/4" ± 1/16"
(311mm ± 1.6mm)
3/4"
(19mm)
NEW YORK • JACKSON, TN • LOS ANGELES • TORONTO
Corners May Be
Rounded to 1/8"
(3mm) Radius
INSTALLATION TEMPLATE AND INSTRUCTIONS
MODEL B-526 PAPER TOWEL DISPENSER
Overall Dimension
6"
(152mm)
1. This unit was designed for countertops measuring 3/4" (19mm)
to 1-1/2" (38mm) mounting thicknesses.
Cutout Dimension
4-1/2" ± 1/16"
(114mm ± 1.6mm)
2. Minimum space requirement: 6" (152mm) x 12-3/4" (324mm).
17" (432mm) minimum clearance below mounting surface required
for paper towel dispenser.
3. Cut out countertop to the dimensions shown along the dotted line,
making certain to position cutout in the location desired.
4. Apply sealant or caulk to underside of flange all around.
5. Place Towel Dispenser unit into opening.
6. While holding unit down, snug against the countertop, bend
(4) tabs up against underside of countertop. Secure with (4)
screws provided.
EDGE OF CUTOUT
Form No. 526-69 (Revised 9/03)
© 2003 Bobrick Washroom Equipment, Inc
FLANGE
Printed in U.S.A.