2:
5:
SYS19: BASE2
PDFINFO
50:
95:
98:
100:
JOB: CRMAIN06-0557-6 Name: 2A-557
DATE: JAN 19 2006
Time: 5:35:22 PM Operator: RB
EDS and EFD Enclosures
with General Use Snap Switches Front
Operated Single Gang and Two Gang
Amperes§
Through
Feed
Cat. #
Style
120VAC
277VAC
3⁄4
1-pole
2-pole
3-pole
3-way
4-way
20
20
‡
20
20
20
20
‡
20
20
EDS2129
EDS218
EDS2123
EDS2130
EDS2140
EDSC2129†
EDSC218†
EDSC2123
EDSC2130
EDSC2140
1
1
1
1
1
1-pole
2-pole
3-pole
3-way
4-way
20
20
‡
20
20
20
20
‡
20
20
EDS3129
EDS318
EDS3123
EDS3130
EDS3140
EDSC3129†
EDSC318†
EDSC3123
EDSC3130
EDSC3140
1
1
1
1-pole
2-pole
3-way
30
30
30
30
30
30
EFD3591
EFD3593
EFD3594
EFDC3591†
EFDC3593†
EFDC3594
3⁄4
3⁄4
Explosionproof
Dust-Ignitionproof
Raintight
Wet Locations
2A
Two Gangɍ
Dead End
Cat. #
3⁄4
Typedriver Name: TS name csm no.: 100
Through feed
Single Gang
3⁄4
TCP: 15001
Cl. I, Div. 1 & 2, Groups B*,C,D
Cl. II, Div. 1, Groups E,F,G
Cl. II, Div. 2, Groups F,G
Cl. III
NEMA 3,7B*CD,9EFG,12
Dead end
Hub
Size
COLOR: CMYK
Dead End
Cat. #
EDS2229
EDS2230
EDS3229
EDS328
EDS3230
EDS3240
EFD3691
EFD3694
Through
Feed
Cat. #
EDSC2229†
EDSC228†
EDSC2223
EDSC2230
EDSC2240
EDSC3229†
EDSC328†
EDSC3223
EDSC3230
EDSC3240
EFDC3691†
EFDC3693†
EFDC3694
*Class I, Group B:
All units listed on this page can be modified
for Class I, Group B usage. Add suffix GB to
the Cat. No.. Example: EDS2129-GB. Seals
must be installed within 11⁄2⍯ of each conduit
opening for Group B usage.
§ See table on page 556 for AC-rated switch information.
† ON-OFF standard marking for 1-pole and 2-pole units
‡ 15A, 125 VAC; 10A, 250 VAC
ɍ Combinations of switches can be furnished.
US: 1-866-764-5454
STIBOINFO((CRH:66008com:2A:557))
CH0 0 2 A - 5
CAN: 1-800-265-0502
Copyright© 2006 Cooper Crouse-Hinds
557
Zoom: 100
2:
5:
SYS19: BASE2
PDFINFO
50:
95:
98:
JOB: CRMAIN06-0556-1 Name: 2A-556
2A
100:
DATE: JAN 19 2006
Time: 5:35:18 PM Operator: RB
with General Use Snap Switches
Front Operated
EDS and EFD enclosures are installed in a
rigid metallic conduit system for surface
mounting adjacent to or remote from
equipment being controlled and are used:
ɀ to prevent arcing of enclosed switch from
causing ignition of a specific hazardous
atmosphere or atmospheres external to the
enclosure
ɀ in industrial areas such as chemical plants,
oil and gas refineries, paint and varnish
manufacturing plants, gasoline bulk loading
terminals, grain elevators, grain processing
industries, coal processing or handling areas,
or metal handling or finishing areas where
atmosphere may contain hazardous gases
and/or dust
ɀ in non-hazardous areas where sturdy,
durable enclosures are required
Features:
ɀ Small and compact in design.
ɀ Used with snap switches.
ɀ Mounting lugs and taper tapped hubs with
integral bushings.
ɀ Large machine screws for fastening covers
to bodies.
ɀ Lockout hole for padlock having 1⁄4⍯ hasp is
provided.
ɀ Threaded type shafts and bushings are
used to insure flametightness.
Standard Materials:
ɀ Bodies and covers – Feraloy® iron alloy
ɀ Shafts – stainless steel
ɀ Shaft bushings – stainless steel
Standard Finishes:
TCP: 15001
Typedriver Name: TS name csm no.: 100
Cl. I, Div. 1 & 2, Groups B*C,D
Cl. II, Div. 1, Groups E,F,G
Cl. II, Div. 2, Groups F,G
Cl. III
NEMA 3,7B*CD,9EFG,12
EDS and EFD Enclosures
Application:
COLOR: CMYK
Explosionproof
Dust-Ignitionproof
Raintight
Wet Locations
Certifications and
Compliances:
ɀ NEC/CEC: Class I, Div. 1 & 2, Groups
B*,C,D
Class II, Div. 1, Groups E,F,G
Class II, Div. 2, Groups F,G
Class III
ɀ NEMA/EEMAC: 3,7B*CD,9EFG,12
ɀ UL Standard: 894
ɀ CSA Standard: C22.2 No. 30
EDS Enclosed
Snap Switch
Options:
Suffix to be
Added to Encl.
Cat. #
Description
ɀ Two or three gang bodies can be supplied with
combinations of devices listed for one gang enclosures . . . . Refer to modular listing, section 4C
ɀ Class I Group B, NEMA 7B – see listing pages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB
ɀ Flush wall mounting cover with 1⁄2⍯ overhang – single gang only –
dull black instrument finish . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S173
Complies with U.L. snap switch test requirements as follows:
Type of Test
Overload
Non-Inductive Endurance
Inductive Endurance
Tungsten Filament Lamp Endurance
Temperature Rise
Dielectric Withstand
AC-Rated (only) Switch
Rated Amp. +380%
Power Factor .40-.50
100 cycles, 6-10 cycles per minute
10,000 cycles, 18-24 cycles per minute at
rated current – .98 min. P.F.
10,000 cycles, 18-24 cycles per minute –
.75-.80 P.F.
10,000 cycles, 6-10 cycles per minute at
rated current and 120 volts
Not to exceed 30°C
1500 volts
ɀ Feraloy iron alloy – electrogalvanized and
aluminum acrylic paint
ɀ Stainless steel – natural
Dimensions† (in inches)
Hub
Size
3⁄4
1
† Dimensions are approximate, not for construction purposes.
* See suffix GB.
556
STIBOINFO((CRH:66008com:2A:556))
CH0 0 2 A - 4
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2006 Cooper Crouse-Hinds
Dim.
‘‘h’’
Dim.
‘‘l’’
7⁄8
13⁄16
1
15⁄16
Zoom: 100