MKP 24
Metallized Polypropylene-Film-Capacitor
with axial leads
for alternating current application
Characteristic

self-healing, small sizes

low dielectric losses, low self inductance

RoHS Compliant 2002/95/EC (recall of 2002/95/EC)
Dielectric: Polypropylene-Film
Electrodes: Vacuum deposited Aluminium with intern series
connection
Dissipation factor tan (at 20°C):  6 * 10-4 at 1 kHz
 10 * 10-4 at 10 kHz
Capacitance tolerance: 20%(M), 10%(K), 5%(J)
Coating: Plastic wrapped, epoxy resin sealed
Leads: Tinned wire
Test voltage (between terminations): 4,3 * UR (dc), 2 s
(Approval test: 1 Min.)
Temperature range: -40°C to +85°C
Test voltage (between terminations and case ): 2 050 Vac, 2 s.,
(Approval test: 1 Min.), foil method
IEC test classification: 40/085/21 acc. EN 60068-1
Pulse rise time dv/dt (max. working): 40 V/µs
Insulation values Ri resp. :
Ri  100 000 M for CR  0,33 µF
  30 000 s for CR > 0,33 µF
Measuring procedure: 100 Vdc, 1 Min., 20°C
Resistance to soldering heat: Bath temperature max. 260°C,
duration max. 10 s, method Tb acc. IEC 60068-2-20
General Data
Capacitance
CR
0,01 µF
0,015 µF
0,022 µF
0,033 µF
0,047 µF
0,068 µF
0,1 µF
0,15 µF
0,18 µF
0,22 µF
0,33 µF
0,47 µF
D
300 Vac
50 / 60 Hz
L
D1
6
6
7
8,5
8
9,5
11
10,5
11,5
14
16
19
19
19
19
26,5
26,5
26,5
31,5
31,5
31,5
31,5
0,6
0,6
0,6
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
D
6
7
8
9,5
9,5
10,5
11
13
14
15
Further values by request
Internal structure / Example
Preformed leads
Style „preformed“ available, specification for L1 and s1 by agreement. Packing loose in boxes.
UPDATE: 2013-11-08
-1/2-
400 Vac
50 / 60 Hz
L
19
19
19
19
26,5
26,5
31,5
31,5
31,5
31,5
D1
0,6
0,6
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
MKP 24
Ordering Code
In the case of different body sizes for same electrical value (in preparation) the code for series with length is requested, otherwise the series
description MKP 24 is sufficient.
All inquiries and orders we accept in usually text or by code. The following table contains the codes, further values by request:
Series and body length
Length L
19 mm
26,5 mm
31,5 mm
+
Code
MKP242
MKP243
MKP244
Capacitance
Value
0,01 µF
0,015 µF
0,022 µF
0,033 µF
0,047 µF
0,068 µF
0,1 µF
0,15 µF
0,18 µF
0,22 µF
0,33 µF
0,47 µF
Tolerance
Code
410
415
422
433
447
468
510
515
518
522
533
547
Value
5%
10%
20%
Code
J
K
M
Voltage
Value
300 Vac
400 Vac
+
Code
Y
7
Packing
Style
loose, leads length 405 mm
taped on reel
loose, preformed
Code
(empty)
R
Px
x: internal Code
Codes for further values by request
The supplier reserved the right to use the description MKP 20 in all documents and will use other rules to distinguish different sizes if
necessary.
Example of code for capacitor MKP 24 – 0,18µF/20%/400vac, loose (untaped), sizes DxL = 14x31,5 mm:
MKP244+518M7
If the purchaser has taken no other agreement, the product description is made as usual text.
Capacitance values are given in Microfarad (µF).
Packing units, preferred quantities
Diameter of capacitor D
max.
mm
6
6,5 ... 7
7,5 ... 8
8,5
9
9,5 ... 10
10,5 ... 11
11,5 ... 12
12,5 ... 13
13,5 ... 15
15,5 ... 16
19 mm
2 000
2 000
1 250
1 250
1 250
1 000
-
loose (leads length 405 mm)
length of capacitor L
26,5 mm
1 000
1 000
1 000
800
600
-
taped / reel
31,5 mm
500
500
500
400
350
all lengths up to 31,5 mm
1 500
1 200
1 000
800
800
800
500
450
400
350
250
Packing units for capacitors with sizes out of above table or with different leads variations by request
Packing: Loose capacitors in boxes or taped and reeled
Additional information find as follow:
General and Principles: www.electel.de/files/general.pdf
Taping: www.electel.de/files/tape_ax.pdf
This specification must be read in conjunction with the data given in the “General technical information” chapter.
Deviations in the construction as opposed to the description in the drawings are possible. The dimension of lengths is mm.
We reserve the rights of delivery and technical alterations without prior notice.
The data indicated herein describe the type of component and shall not be considered as guaranteed characteristics.
In all cases the German version of this document shall be taken as authoritative.
Electronic-Bauteile Görlitz GmbH  Am Klinikum 7  02828 Görlitz  Germany
Tel.: +49(0)3581 76510  Fax: +49(0)3581 765113  E-mail: kontakt@electel.de  Website: www.electel.de
UPDATE: 2013-11-08
-2/2-