CONCEALED HINGES Concealed Hinges For added security or a sleek enclosure design, concealed hinges offer the solution, with mounting discreetly hidden away from view to avoid tampering. 536 WAC_sp_Dividers.indd 536 15/02/2012 10:51:32 WAC_A510.fm Page 537 Thursday, February 16, 2012 2:29 PM CONCEALED HINGES CONCEALED HINGES S2100 Concealed Pivot Hinges - 10 mm Bend weld and stud - zinc Material Body: die cast zinc. Hinge Plate: steel, copper plated for improved welding. Pin: steel. bend in sheet metal. Hinge plate welded to frame (copper plated for improved welding). Max. opening angle 110°. Technical Notes Suited to 2 mm sheet metal and machine enclosures with a 10 mm internal bend. Main body mounted via single M5 stud, supported by stepped Order No. Size S2100.AC0010 40 x 15,5 x 10,2 accesscomponents.co.uk info@accesscomponents.co.uk 01483 266 772 01483 266 773 537 WAC_A510.fm Page 538 Thursday, February 16, 2012 2:29 PM CONCEALED HINGES CONCEALED HINGES S2104 Concealed Pivot Hinges - Lift Off 18 & 18,5 mm door return - weld and stud - steel Material Body: steel, St 37, zinc plated. Hinge Plate: steel, copper plated for improved welding. Removable hinge pin enables easy installation and is held in place via rubber o-ring. Max. opening angle 120°. Technical Notes Suited to sheet metal and machine enclosures with door return. Main body mounted via two M6 screws. Hinge plate either welded or screwed to enclosure body. Order No. Type Door Return Size S2104.AC0018 S2104.AC0019 Type One - Bolt and weld Type Two - Bolt or Weld 18,0 mm off-set 18,5 mm off-set 60 x 22,5 x 18,0 65 x 23,5 x 18,5 538 accesscomponents.co.uk info@accesscomponents.co.uk 01483 266 772 01483 266 773 WAC_A510.fm Page 539 Thursday, February 16, 2012 2:29 PM CONCEALED HINGES CONCEALED HINGES S2106 Concealed Pivot Hinges - Lift Off 18 & 18,5 mm door return - weld and stud - stainless steel Material Body & Hinge Plate: stainless steel, AISI 303. Pin: stainless steel. Removable hinge pin enables easy installation and is held in place via rubber o-ring. Max. opening angle 120°. Technical Notes Suited to sheet metal and machine enclosures with door return. Main body mounted via two M6 screws. Hinge plate either bolted or welded to enclosure cover. Order No. Type Door Return Size S2106.AC0518 S2106.AC0519 Type One - Bolt or weld Type Two - Bolt or Weld 18,0 mm off-set 18,5 mm off-set 60 x 22,5 x 18,0 65 x 23,5 x 18,5 accesscomponents.co.uk info@accesscomponents.co.uk 01483 266 772 01483 266 773 539 WAC_A510.fm Page 540 Thursday, February 16, 2012 2:29 PM CONCEALED HINGES CONCEALED HINGES S2110 Concealed Pivot Hinges 18 & 20 mm door return - weld and stud - zinc & steel Material Body: die cast zinc, chrome plated. Hinge Plate: steel, copper plated for improved welding. Pin: steel. (copper plated for improved welding). Removable hinge pin enables easy installation, and is held in place via rubber o-ring. Max. opening angle 130°. Technical Notes Suited to sheet metal and machine enclosures with a 18 or 20 mm door return. Main body mounted via two M5 screws, hinge plate welded to frame Tips Three different welding piece options to accomodate varying installation requirements. Order No. Type Door Return Size S2110.AC0012 S2110.AC0013 S2110.AC0014 Type One Type Two Type Three 18 mm off-set 18 mm off-set 20 mm off-set 57 x 24,5 x 18 57 x 24,5 x 18 57 x 27,0 x 20 540 accesscomponents.co.uk info@accesscomponents.co.uk 01483 266 772 01483 266 773 Installation of hinge to enclose body is made via hole mounting. Installation of hinge to enclosure cover is made via welding of tab or roller to the sheet metal of the enclosure cover. Details of Hole Mount Fixings Mounting Dimension for Hinge Type One - Tab Mounting Dimension for Hinge Type Two - Roller Mounting Dimension for Hinge Type Three - Large Roller accesscomponents.co.uk WAC_sp_Series_S.indd 541 info@accesscomponents.co.uk 01483 266 772 01483 266 773 CONCEALED HINGES Mounting Options for Concealed Pivot Hinges S2110 541 15/02/2012 14:51:38 WAC_A510.fm Page 542 Thursday, February 16, 2012 2:29 PM CONCEALED HINGES CONCEALED HINGES S2114 Concealed Pivot Hinges - Lift Off 20 mm door return - weld and stud - steel Removable hinge pin enables easy installation and is held in place via rubber o-ring. Max. opening angle 135°. Material Body & Hinge Plate: steel, St 37, zinc plated. Pin: steel. Technical Notes Suited to sheet metal and machine enclosures with door return. Main body mounted via two M6 screws, hinge plate mounted via nut to welded stud on door. Order No. Door Return Size S2114.AC0020 20,0 mm off-set 65 x 32,5 x 20,0 542 accesscomponents.co.uk info@accesscomponents.co.uk 01483 266 772 01483 266 773 WAC_A510.fm Page 543 Thursday, February 16, 2012 2:29 PM CONCEALED HINGES CONCEALED HINGES S2116 Concealed Pivot Hinges - Lift Off 20 mm door return - weld and stud - stainless steel Removable hinge pin enables easy installation and is held in place via rubber o-ring. Max. opening angle 135°. Material Body & Hinge Plate: stainless steel, AISI 303. Pin: stainless steel. Technical Notes Suited to sheet metal and machine enclosures with door return. Main body mounted via two M6 screws, hinge plate mounted via nut to welded stud on door. Order No. Door Return Size S2116.AC0520 20,0 mm off-set 65 x 32,5 x 20,0 accesscomponents.co.uk info@accesscomponents.co.uk 01483 266 772 01483 266 773 543 WAC_A510.fm Page 544 Thursday, February 16, 2012 2:29 PM CONCEALED HINGES CONCEALED HINGES S2120 Concealed Pivot Hinges - Lift Off 20 & 24 mm door return - weld and stud - steel rubber o-ring. Max. opening angle 120°. Material Body & Hinge Plate: steel, St 37, zinc plated. Technical Notes Suited to sheet metal and machine enclosures with door return. Main body mounted via two M6 screws, hinge plate welded to frame. Removable hinge pin enables easy installation and is held in place via Order No. Door Return S2120.AC0020 20,0 mm off-set S2120.AC0024 24,0 mm off-set S2120.AC0120 20 mm off-set S2120.AC0124 24,0 mm off-set 544 accesscomponents.co.uk Size A B C D E 60 x 32,5 x 20 60 x 32,5 x 24 60 x 38,5 x 20 60 x 38,5 x 24 32,5 32,5 38,5 38,5 26,0 26,0 32,5 32,5 34,0 34,0 40,0 40,0 20,0 24,0 20,0 24,0 3 4 3 4 info@accesscomponents.co.uk 01483 266 772 01483 266 773 WAC_A510.fm Page 545 Thursday, February 16, 2012 2:29 PM CONCEALED HINGES CONCEALED HINGES S2122 Concealed Pivot Hinges - Lift Off 20 & 24 mm door return - weld and stud - stainless steel installation, and is held in place via rubber o-ring. Max. opening angle 120°. Material Body & Hinge Plate: stainless steel, AISI 303. Pin: stainless steel. Technical Notes Suited to sheet metal and machine enclosures with door return. Main body mounted via two M6 screws, hinge plate welded to frame. Removable hinge pin enables easy Order No. Door Return Size A B C D E S2122.AC0520 S2122.AC0524 S2122.AC0620 S2122.AC0624 20,0 mm off-set 24,0 mm off-set 20,0 mm off-set 24,0 mm off-set 60 x 32,5 x 20 60 x 32,5 x 24 60 x 38,5 x 20 60 x 38,5 x 24 32,5 32,5 38,5 38,5 25,5 25,5 32,0 32,0 34,0 34,0 40,0 40,0 20,0 24,0 20,0 24,0 3 4 3 4 accesscomponents.co.uk info@accesscomponents.co.uk 01483 266 772 01483 266 773 545 WAC_A510.fm Page 546 Thursday, February 16, 2012 2:29 PM CONCEALED HINGES CONCEALED HINGES S2124 Concealed Pivot Hinges - Lift Off 20 & 24 mm door return - weld and stud - steel installation, and is held in place via rubber o-ring. Max. opening angle 120°. Material Body & Hinge Plate: steel, St 37, zinc plated. Pin: steel. Technical Notes Suited to sheet metal and machine enclosures with door return. Main body mounted via two M6 screws, hinge plate welded to frame. Removable hinge pin enables easy Order No. Door Return Size A B C D E S2124.AC0020 S2124.AC0024 S2124.AC0120 S2124.AC0124 20,0 mm off-set 24,0 mm off-set 20,0 mm off-set 24,0 mm off-set 60 x 32,5 x 20 60 x 32,5 x 24 60 x 38,5 x 20 60 x 38,5 x 24 32,5 32,5 38,5 38,5 26,0 26,0 32,5 32,5 34,0 34,0 40,0 40,0 20,0 24,0 20,0 24,0 3 4 3 4 546 accesscomponents.co.uk info@accesscomponents.co.uk 01483 266 772 01483 266 773 WAC_A510.fm Page 547 Thursday, February 16, 2012 2:29 PM CONCEALED HINGES CONCEALED HINGES S2126 Concealed Pivot Hinges - Lift Off 20 & 24 mm door return - weld and stud - stainless steel installation, and is held in place via rubber o-ring. Max. opening angle 120°. Material Body & Hinge Plate: stainless steel, AISI 303. Pin: stainless steel. Technical Notes Suited to sheet metal and machine enclosures with door return. Main body mounted via two M6 screws, hinge plate welded to frame. Removable hinge pin enables easy Order No. Door Return Size A B C D E S2126.AC0520 S2126.AC0524 S2126.AC0620 S2126.AC0624 20,0 mm off-set 24,0 mm off-set 20,0 mm off-set 240 mm off-set 60 x 32,5 x 20 60 x 32,5 x 24 60 x 38,5 x 20 60 x 38,5 x 24 32,5 32,5 38,5 38,5 26,0 26,0 32,5 32,5 34,0 34,0 40,0 40,0 20,0 24,0 20,0 24,0 3 4 3 4 accesscomponents.co.uk info@accesscomponents.co.uk 01483 266 772 01483 266 773 547 WAC_A510.fm Page 548 Thursday, February 16, 2012 2:29 PM CONCEALED HINGES CONCEALED HINGES S2128 Concealed Pivot Hinges 21,5 & 24,5 mm door return - weld and stud - zinc & steel Material Body: die cast zinc, zinc plated. Hinge Plate: steel, copper plated for improved welding. Pin: steel. Technical Notes Suited to sheet metal and machine enclosures with a 21,5 to 24,5 mm door return. Main body mounted via two M6 x 10 screws, hinge plate welded to frame (copper plated for improved welding). Removable hinge pin enables easy installation, and is held in place via rubber o-ring. Max. opening angle 110°. Order No. Door Return Size h1 h2 S2128.AC0021 S2128.AC0024 21,5 mm off-set 24,5 mm off-set 50 x 35 x 21,5 50 x 35 x 24,5 21,5 24,5 23,5 26,5 548 accesscomponents.co.uk info@accesscomponents.co.uk 01483 266 772 01483 266 773 CONCEALED HINGES accesscomponents.co.uk WAC_sp_Blank_Filler.indd 549 info@accesscomponents.co.uk 01483 266 772 01483 266 773 549 15/02/2012 11:43:09 WAC_A510.fm Page 550 Thursday, February 16, 2012 2:29 PM CONCEALED HINGES CONCEALED HINGES S2130 Concealed Pivot Hinges 22,5 mm door return - weld and stud - steel Material Body: steel, St 37, zinc plated. Hinge Plate: steel, copper plated for improved welding. Pin: Steel. Technical Notes Suited to 2 mm sheet metal and machine enclosures with a 22,5 mm door return. Main body mounted either via two M5 screw holes, or two M5 x 10 Order No. Hole Mount Order No. Stud Mount studs, hinge plate welded to frame (copper plated for improved welding). Removable hinge pin enables easy installation, and is held in place via rubber o-ring. Max. opening angle 110°. Type S2130.AC0012 S2130.AC0312 Type One - Tab S2130.AC0013 S2130.AC0313 Type Two - Std Roller S2130.AC0014 S2130.AC0314 Type Three - Large Roller 550 accesscomponents.co.uk Door Return Size 22,5 mm off-set 22,5 mm off-set 22,5 mm off-set 56 x 24,5 x 22,5 56 x 24,5 x 22,5 56 x 24,5 x 22,5 info@accesscomponents.co.uk 01483 266 772 01483 266 773 Hinges are available as either hole mount or stud mount., see order table. Installation of hinge to enclosure body is made either via hole or stud mounting. Installation of hinge to Installation of Hole Mount Hinge Mounting Dimension for Hinge Type One Tab accesscomponents.co.uk WAC_sp_Series_S.indd 551 enclosure cover is made via welding of tab or roller to the sheet metal of the enclosure cover. Installation of Stud Mount Hinge Mounting Dimension for Hinge Type Two Standard Roller info@accesscomponents.co.uk 01483 266 772 01483 266 773 CONCEALED HINGES Mounting Options for Concealed Pivot Hinges S2130 Mounting Dimension for Hinge Type Three Large Roller 551 15/02/2012 14:52:40 WAC_A510.fm Page 552 Thursday, February 16, 2012 2:29 PM CONCEALED HINGES CONCEALED HINGES S2132 Concealed Pivot Hinges 22,5 mm door return - weld and stud - stainless steel rubber o-ring. Max. opening angle 110°. Material Body & Pin: stainless steel, AISI 303. Technical Notes Suited to 2 mm sheet metal and machine enclosures with a 22,5 mm door return. Main body mounted via two M5 screw holes, hinge plate welded to frame. Removable hinge pin enables easy installation and is held in place via Order No. Door Return Size S2132.AC0512 22,5 mm off-set 56 x 24,5 x 22,5 552 accesscomponents.co.uk info@accesscomponents.co.uk 01483 266 772 01483 266 773 CONCEALED HINGES accesscomponents.co.uk WAC_sp_Blank_Filler.indd 553 info@accesscomponents.co.uk 01483 266 772 01483 266 773 553 15/02/2012 11:43:54 WAC_A510.fm Page 554 Thursday, February 16, 2012 2:29 PM CONCEALED HINGES CONCEALED HINGES S2140 Concealed Pivot Hinges 23,5 & 25,5 mm door return - weld and stud - steel Material Body: steel, St 37, zinc plated. Pin: steel. Technical Notes Suited to 2 mm sheet metal and machine enclosures with a 22,5 mm door return. Main body has two mounting patterns of either two or three M5 screw holes for increased flexibility and easy mounting. Hinge plate welded to frame (copper plated for improved welding). See diagram for installation cut-out dimensions. Max. opening angle 110°. Order No. Type Door Return Size S2140.AC0012 S2140.AC0013 S2140.AC0014 Type One - Tab Type Two - Std Roller Type Three - Large Roller 23,5 mm off-set 23,5 mm off-set 25,5 mm off-set 80 x 20,5 x 23,5 80 x 20,0 x 22,5 80 x 23,0 x 25,5 554 accesscomponents.co.uk info@accesscomponents.co.uk 01483 266 772 01483 266 773 Each hinge has fixing holes on two available mounting edges - mounting edge ‘A’ or ‘B’. Installation of hinge to enclosure body is made via hole mounting on either mounting edge ‘A’ Installation on Mounting Edge ‘A’ Mounting Dimension for Hinge Type One - Tab when using Mounting Edge ‘A’ accesscomponents.co.uk WAC_sp_Series_S.indd 555 or ‘B’. Installation of hinge to enclosure cover is made via welding of tab or roller to the sheet metal of the enclosure cover. Two Mounting Edge Options Mounting Dimension for Hinge Type Two - Standard Roller when using Mounting Edge ‘A’ info@accesscomponents.co.uk 01483 266 772 Installation on Mounting Edge ‘B’ Mounting Dimension for Hinge Type Three - Large Roller when using Mounting Edge ‘A’ 01483 266 773 CONCEALED HINGES Mounting Options for Concealed Pivot Hinges S2140 Mounting Dimension for Hinge Types One, Two and Three when using Mounting Edge ‘B’ 555 15/02/2012 14:53:21 WAC_A510.fm Page 556 Thursday, February 16, 2012 2:29 PM CONCEALED HINGES CONCEALED HINGES S2150 Concealed Pivot Hinges 24,5 mm Door Return - weld and stud - zinc & steel (copper plated for improved welding). Removable hinge pin enables easy installation, and is held in place via rubber o-ring. Max. opening angle 110°. Material Body: die cast zinc, zinc plated. Hinge Plate: steel, copper plated for improved welding. Pin: steel. Technical Notes Suited to sheet metal and machine enclosures with a 24,5 mm door return. Main body mounted via two M6 x 10 screws, hinge plate welded to frame Order No. Door Return Size S2150.AC0024 24,5 off-set 74 x 24,5 x 24,5 556 accesscomponents.co.uk info@accesscomponents.co.uk 01483 266 772 01483 266 773 WAC_A510.fm Page 557 Thursday, February 16, 2012 2:29 PM CONCEALED HINGES CONCEALED HINGES S2152 Concealed Pivot Hinges 24,5 mm door return - weld and stud - steel Material Body: steel, zinc plated. Hinge Plate: steel, copper plated for improved welding. Pin: steel. (copper plated for improved welding). Removable hinge pin enables easy installation, and is held in place via rubber o-ring. Max. opening angle 110°. Technical Notes Suited to sheet metal and machine enclosures with a 24,5 mm door return. Main body mounted via two M5 x 12 screws, hinge plate welded to frame Tips Suitable for heavy duty applications. Order No. Door Return Size S2152.AC0010 S2152.AC0310 24,5 off-set 24,5 off-set 107 x 25 x 24,5 107 x 25 x 24,5 accesscomponents.co.uk info@accesscomponents.co.uk 01483 266 772 01483 266 773 557 WAC_A510.fm Page 558 Thursday, February 16, 2012 2:29 PM CONCEALED HINGES CONCEALED HINGES S2154 Concealed Pivot Hinges 24,5 mm door return - weld and stud - stainless steel Material Body: Stainless steel. Hinge Plate: Stainless steel, copper plated for improved welding. Removable hinge pin enables easy installation, and is held in place via rubber o-ring. Max. opening angle 110°. Technical Notes Suited to sheet metal and machine enclosures with a 24,5 mm door return. Main body mounted via two M5 screws, hinge plate welded to frame (copper plated for improved welding). Tips Suitable for heavy duty applications. Order No. Door Return Size S2154.AC0010 24,5 off-set 107 x 25 x 24,5 558 accesscomponents.co.uk info@accesscomponents.co.uk 01483 266 772 01483 266 773 WAC_A510.fm Page 559 Thursday, February 16, 2012 2:29 PM CONCEALED HINGES CONCEALED HINGES S2160 Concealed Pivot Hinges - Lift Off 25 mm door return - weld- and tud - steel or aluminium installation and is held in place via rubber o-ring. Max. opening angle 110°. Hinge Plate: steel, copper plated for improved welding. Pin: steel. Material Type One: Body: Aluminium, matt anodized. Hinge Plate: steel, copper plated for improved welding. Pin: steel. Type Two: Body: die cast zinc, chrome plated, with copper plated hinge plate for improved welding. Technical Notes Suited to sheet metal and machine enclosures with a 25mm door return. Main body mounted via two M5 screws, hinge plate welded to frame (copper plated for improved welding). Removable hinge pin enables easy Order No. Type Door Return Size S2160.AC0010 S2160.AC0210 Type One Type Two 25 mm off-set 25 mm off-set 40 x 21,5 x 25 40 x 21,5 x 25 accesscomponents.co.uk info@accesscomponents.co.uk 01483 266 772 01483 266 773 559 WAC_A510.fm Page 560 Thursday, February 16, 2012 2:29 PM CONCEALED HINGES CONCEALED HINGES S2164 Concealed Pivot Hinges 30,9 mm door return - weld and stud - steel plated for improved welding). Removable hinge pin enables easy installation and is held in place via rubber o-ring. Max. opening angle 110°. Material Body: Steel, zinc plated. Hinge Plate: steel, copper plated for improved welding. Pin: steel. Technical Notes Suited to sheet metal and machine enclosures with a 30,9 mm door return. Main body mounted via two M5 screws, hinge plate welded to frame (copper Order No. Door Return Size S2164.AC0010 30,9 off-set 98 x 23,4 x 30,9 560 accesscomponents.co.uk info@accesscomponents.co.uk 01483 266 772 01483 266 773 WAC_A510.fm Page 561 Thursday, February 16, 2012 6:33 PM CONCEALED HINGES CONCEALED HINGES S2200 End Mount Concealed Pivot Hinge spring loaded - weld-on - stainless steel Material Stainless steel, AISI 304. Technical Notes Spring loaded for self-closing. Lift pin for easy installation and removal. Torsion moment (hinge closed): 0.76 kgf/cm per piece. Max. opening angle 100°. Order No. Type S2200.AC0010 S2200.AC0110 Left Right accesscomponents.co.uk info@accesscomponents.co.uk X g 38 38 01483 266 772 01483 266 773 561 WAC_A510.fm Page 562 Thursday, February 16, 2012 2:29 PM CONCEALED HINGES CONCEALED HINGES S2204 End Mount Concealed Pivot Hinge spring loaded - screw or weld-on mount - steel Material Body & Pin: Steel, zinc plated. Technical Notes For sheet metal doors, cabinets and machinery covers. Spring body can be either welded, or screw mounted. Pull back pin lever, hinge pin is retracted. Release pin lever and hinge pin springs back. Max. opening angle 110°. Tips Spring loaded feature of hinge enables easy assembly and disassembly of panel/door, ideal for maintenance covers. Typical assembly utilises spring loaded hinge at top of door and corresponding hinge spigot at foot of door. Order No. Type Screw Size Size S2204.AC0031 S2204.AC0131 S2204.AC0060 S2204.AC0160 Right Hand Left Hand Right Hand Left Hand M3 M3 M5 M5 35 x 16 35 x 16 60 x 18 60 x 18 562 accesscomponents.co.uk info@accesscomponents.co.uk 01483 266 772 01483 266 773 WAC_A510.fm Page 563 Thursday, February 16, 2012 2:29 PM CONCEALED HINGES CONCEALED HINGES S2206 End Mount Concealed Pivot Hinge spring loaded - screw or weld-on mount - stainless steel Material Body & Pin: Stainless steel, AISI 303. Technical Notes For sheet metal doors, cabinets and machinery covers. Spring body can be either welded, or screw mounted. Pull back pin lever, hinge pin is retracted. Release pin lever and hinge pin springs back. Max. opening angle 110°. Tips Spring loaded feature of hinge enables easy assembly and disassembly of panel/door, ideal for maintenance covers. Typical assembly utilises spring loaded hinge at top of door and corresponding hinge spigot at foot of door. Order No. Type Screw Size Size S2206.AC0031 S2206.AC0131 S2206.AC0060 S2206.AC0160 Right Hand Left Hand Right Hand Left Hand M3 M3 M5 M5 35 x 16 35 x 16 60 x 18 60 x 18 accesscomponents.co.uk info@accesscomponents.co.uk 01483 266 772 01483 266 773 563 WAC_A510.fm Page 564 Thursday, February 16, 2012 2:29 PM CONCEALED HINGES CONCEALED HINGES S2210 End Mount Concealed Pivot Hinge spring loaded - weld-on - steel hinge spigot at foot of door. pin springs back. Max. opening angle 110°. Material Body: Steel, copper plated for improved welding. Pin: steel, zinc plated. Technical Notes For sheet metal doors, cabinets and machinery covers. Hinge body is welded in place. Pull back pin lever, hinge pin is retracted. Release pin lever and hinge Tips Spring loaded feature of hinge enables easy assembly and disassembly of panel/door, ideal for maintenance covers. Typical assembly utilises spring loaded hinge at top of door and corresponding Order No. Type D1 dia. D2 dia. D3 dia. L1 L2 L3 S2210.AC0009 S2210.AC0010 S2210.AC0012 S2210.AC0015 S2210.AC0192 Spring hinge Spring hinge Spring hinge Spring hinge Hinge spigot 10 10 12 15 - 8,5 8,5 9,0 12,0 - 6 6 6 9 - 26,5 38,0 38,0 47,0 - 3,5 3,5 3,5 6,0 - 10,0 10,0 10,0 14,5 - 564 accesscomponents.co.uk info@accesscomponents.co.uk 01483 266 772 01483 266 773 WAC_A510.fm Page 565 Thursday, February 16, 2012 2:29 PM CONCEALED HINGES CONCEALED HINGES S2250 Concealed Pivot Hinges - Integral Stay screw mount - stainless steel Material Stainless steel, AISI 304. Technical Notes Combined hinge and stay easily installed/removed via installation pin. Ideal for removal of machine/ equipment covers for maintenance. Order No. S2250.AC0010 accesscomponents.co.uk Tips Particularly suited to gaming industry. Nature of hinges movement enables machine cover and body to be fully sealed to prohibit tampering or interference. Important Notes Suitable for doors up to10Kg (as pair). Holding force: 30kgf/cm each. X g 190 info@accesscomponents.co.uk 01483 266 772 01483 266 773 565 WAC_A510.fm Page 566 Thursday, February 9, 2012 1:58 PM CONCEALED CONCEALED HINGES HINGES S2260 Recessed Fitting - Snap-On Easy Mount screw mount - steel Material Steel, Nickel plated. Technical Notes Snap-on feature allows easy installation and removal of door panel, especially suitable for maintenance. Max. opening angle 95°. Tips Hinge enables opening of doors without interference with side panels and hence ideal where two doors are mounted close together. Important Notes When correctly installed hinges require only a 3.9 mm opening clearance between units. Order No. Type S2260.AC0010 S2260.AC0050 Hinge Mounting Plate 566 accesscomponents.co.uk info@accesscomponents.co.uk X g 138 81 01483 266 772 01483 266 773 Wide Range of Hinge Solutions HINGES Left or Right Type – Which Do You Need? Hinges Throughout our catalogue we refer to parts as being of a “Left” or “Right” type or hand. Which type you need, is most easily explained as followed; Wixroyd have a diverse range of hinges to suit most industrial applications in a wide range of materials and finishes. Orientate your application so that when opened the door/panel comes towards you. With this orientation in mind, look to see on which side of the door/panel the hinges are mounted? External Hinges If the hinges are on the left side of the door/panel then you require “Left” type products. Off-set Mount Hinges External or surface mount hinges have a wide range of application on electrical panels, sheet metal enclosures, generators and heating and venting applications. Surface Mount Hinges If the hinges are on the right side of the door/panel then you require “Right” type products. The following diagram clearly indicates the layout and orientation of the door where a “left” or “right” product is used. Flush Mount Hinges Right Hand Door (Hinges on right hand side) Corner Hinges Left Hand Door (Hinges on left hand side) Example - IT Enclosures 486 accesscomponents.co.uk WAC_sp_Series_S.indd 486 info@accesscomponents.co.uk 01483 266 772 01483 266 773 15/02/2012 14:48:14 Door Removal Hinges Torque and Positioning Hinges For added security or a sleek enclosure design, concealed hinges offer the solution with mounting discreetly hidden away from view to avoid tampering. Door removal or lift-off hinges simplify removal of covers and panels to ease access for maintenance and repair, available in a selection of materials. Torque and positioning hinges offer positive location of panels, screens and displays using constant friction for a firm hold. Concealed Pivot Hinges Lift Off Hinges Constant Torque Hinges HINGES Concealed Hinges Detent Positioning Hinges End Mount Concealed Pivot Hinges 4 positions, 90° each Example - Generators and Compressors accesscomponents.co.uk WAC_sp_Series_S.indd 487 info@accesscomponents.co.uk 01483 266 772 01483 266 773 487 15/02/2012 14:48:38