FOR HEAVY DUTY JOBS – WELDER,
GENERATOR AND AIR COMPRESSOR
Air Vantage 800
®
KEY FEATURES
Choose the Air Vantage 800 for high output applications, including mining industry repair.
When necessary, arc gouge with up to 1/2 in. (12.7 mm) carbons. The Air Vantage 800 is
great for large diameter wire welding, including .120 in. (3.0 mm) Innershield® and most 3/32
in. (2.4 mm) Lincore® hardfacing wires.
®
• Rotary Screw Air Compressor powers arc gouging, plasma cutting and other air tools
• Select from one of five welding process modes
• Plenty of AC Generator power
• Stainless steel enclosure adds durability
Publication E6.235 | Issue Date 05/16
© Lincoln Global Inc. All Rights Reserved
www.lincolnelectric.com
Processes »
Stick, TIG, MIG, Flux-Cored,
Gouging
Output »
Input »
Product Number »
K2961-5
FEATURES
»» Rotary Screw Compressor
VMAC® brand rotary screw air compressor rated
at 60 SCFM, 100 PSI, 100% duty cycle, delivers
abundant air for arc gouging with up to 1/2 in.
(12.7 mm) carbons, plasma cutting and air tools
such as an impact gun.
PERFORMANCE
Arc Performance
• 650 amps at 100% duty cycle and capable of 800 amps at 100%
duty cycle using
Chopper Technology®. All ratings are at
temperatures of 104°F/40°C. Derated outputs for higher temperatures and
high altitude.
WHAT IS CHOPPER TECHNOLOGY®?
»» Multi-Process Welding, Separate Arc Gouge Mode
Select one of five process modes, including
CC-stick, downhill pipe (for stick), DC Touch
Start TIG®, CV-wire or arc gouging mode which
maximizes output with up to 1/2 in. (12.7 mm)
carbon rods.
»» Plenty of AC Generator Power
20 kW continuous 3-phase 240V AC generator
power will operate industrial equipment such as
plasma cutters, pumps, inverter welders
and grinders.
12 kW continuous 1-phase AC generator power
for common construction tools
and lights.
»» Stainless Steel Enclosure
Standard stainless steel roof, side panels and
engine-access door deliver added protection,
durability and corrosion-resistance. Eliminates
need to replace these items due to paint damage
or rust.
Traditional weld control is more
variable around the desired output.
Chopper Technology
delivers extremely fast response
for tighter output control.
Patented and award-winning Lincoln Electric
Chopper Technology
delivers superior DC arc welding performance for general purpose stick,
downhill pipe, DC TIG, MIG, cored-wire and arc gouging.
Benefits of
Chopper Technology include:
- Easy arc starting
- Smooth arc action
- Low spatter levels
- Excellent bead appearance
•VRD® (Voltage Reduction Device™) reduced OCV (Open Circuit Voltage) in
CC-stick, CV-wire and arc gouging welding modes for added safety.
• Arc gouging mode maximizes output for up to 1/2 in. (12.7 mm) carbon rods.
Easy starts, especially with VRD™ on.
• CC-stick mode is optimized for general purpose stick using E7018 low
hydrogen electrode.
• Excellent CV wire welding with cored-wire and MIG (CO2 and mixed gas).
WHAT IS VRD?
The VRD® (Voltage Reduction Device) provides additional safety in the
CC-stick, CV-wire and arc gouging weld modes, especially when working in
an environment with a higher risk of electrical shock such as wet areas and
hot, humid, sweaty conditions. The VRD reduces the OCV at the welding
output terminals while not welding to less than 30 volts DC.
The VRD is activated by flipping a toggle switch inside the machine to the
“ON” position. Indicator lights monitor the voltage: green for less than
30 volts while not welding, and either red (greater than 30 volts) or green
while welding, depending on the actual voltage of the arc.
Other weld modes when VRD is on:
Downhill Pipe – There is no output.
Touch Start TIG – No difference in operation. TIG is normally a low
voltage (less than 30 volts) operation.
VRD portion of
nameplate with
green light on.
• Built-in “hot” start in CC-stick and CV-wire modes for easier starts and
restrikes minimizing the electrode “sticking” to the work.
• Downhill pipe mode has arc force control for enhanced pipe welding.
The pipe mode is excellent for cellulosic electrodes and facilitates fast
travel speeds, especially on fill passes. Adjust the arc force for a soft,
buttery arc or a more forceful digging arc.
• Standard DC Touch Start TIG® welding, not scratch start, for easy arc
starting that avoids tungsten contamination and the need for
high-frequency.
PERFORMANCE
Air Compressor Performance
• Compressor is belt-driven from the engine using a magnetic clutch. Includes an automatic belt tensioner for optimal compressor performance. A pressure sensor avoids excessive clutch wear by preventing clutch engagement when high compressor back
pressure exists.
• The compressor can be conveniently turned on or off with an easy-toreach toggle switch located on the control panel. The full output of
28.3 liters/second (60 SCFM) is available when the engine is set to high
idle mode, or 18.9 liters/second (40 CFM) of output in low idle mode.
• The air shut-off valve can easily be closed for connecting and
disconnecting an air hose. The valve is located in a recessed area
below the control panel for convenient access and protection against
accidental impact.
• The compressor automatically shuts down for high temperature. An
indicator light on the control panel turns on for this condition. The
compressor automatically becomes operational when the temperature
returns to normal.
• Compressor maintenance items such as filters are easily accessed in
the single-side-service engine compartment. The drain connection
for the valve and compressor oil is located in the base of the engine
compartment. Recommended 500-hour maintenance intervals
minimize system service frequency.
• An optional field-installed air filter kit minimizes water content in the
supply air. This avoids cold weather air hose ice up. The compact kit
installs on the case side of the Air Vantage 800 or to a nearby service
truck wall.
• A minimum pressure air check valve is included to improve compressor
shutdown when the compressor shut-off valve is occasionally
left open.
Generator Performance
• Simultaneously weld and use 3-phase AC power – for example, up to
12,000 watts can be delivered while welding up to 400 amps. Compare
to competitive product which has 3-phase power available as an
extra-cost factory-only option.
• 3-phase 240V receptacle on control panel eliminates the need to
hard-wire the connections. Compare to competitive product which
usually requires hard-wired connections.
• The Air Vantage 800 provides added value at the job site by delivering
up to 12,000 watts of 1-phase AC auxiliary power for equipment such as
a Lincoln Electric plasma cutter. Also use for lights, grinders and other
common construction tools. Compare this to the common competitive
standard of 4,000 watts of single phase AC power. No expensive
options are required to add significant generator capacity.
• Simultaneously weld and use AC power – the full 12,000 watts
(1 or 3-Phase) can be delivered while welding up to 400 amps. Plug in a
Lincoln Electric Invertec® V275-S for a second arc.
• Nominal 120V and 240V AC generator voltage is independent of any
weld dial setting.
• 120V receptacles are GFCI (Ground Fault Circuit Interrupter) protected
with sealed GFCI units.
• All receptacles are circuit breaker protected. Each receptacle has a
spring-loaded weather cover which keeps each receptacle protected
when not in use.
[ 3 ] | Air Vantage 800
FEATURES
• Single-side engine and compressor access for routine maintenance.
Lockable, sliding door located on the right side of the machine opens
easily in tight surroundings.
• Simple Controls – Keep training time to a minimum with the
straightforward control panel of the Air Vantage 800. The flip-down control
panel door keeps less frequently used dials out of the way.
• 69 hp Cummins® B3.3T Turbo-Charged diesel engine. Engine is 4-cylinder,
water-cooled and has plenty of power.
• Glow plugs for cold weather starting.
• Digital meters for amps and volts output make it easy to precisely set your
procedures. Fuel, oil pressure and engine temperature gauges keep you on
top of monitoring engine performance.
• Automatic engine idler for greater fuel economy and reduced noise.
• Engine start switch at mid-section of control panel for easy reach on
truck-mounted units.
• Large 95 liter (25 gallon) fuel tank provides run time for all day use: 9 hours
of arc gouging at 650A/40V/60% duty cycle output with the compressor
also operating at 60% duty cycle.
• Engine hour meter makes it easy to schedule maintenance.
Air Vantage 800. Covered output studs are located in recessed area
below control panel for convenient access and protection against
accidental impact.
• Output at welding terminals is controlled by an electronic contactor. It can
be switched to “Weld Terminals On” or to “Remotely Controlled”.
• Automated Remote Control Capability – Output at welding terminals is
automatically switched from the machine to the remote mode when a
remote device is connected (standard 6 pin connector).
For the CC-stick, downhill pipe and Touch Start TIG modes, the machine
output dial becomes a maximum current limit for more fine tuning with
the remote control dial or Amptrol™.
• LN-25 Ironworker™ across-the-arc wire feeder is a recommended option.
• Compatible with many Lincoln Electric wire feeders with control cables­–
LN-25 PRO Dual Power, LF-72, LF-74, LN-7 GMA, FlexFeed™ 74 HT. Also
compatible with the Magnum® SG Spool Gun System, NA-3 Control, LT-7
Tractor and Activ8™ across-the-arc wire feeder.
• Two Air Vantage 800 units can be paralleled in the CC-stick mode to
increase welding output.
• Oil drain valve and tube directs used engine oil away from the base into
an oil pan.
• Patented lockable radiator cap access door to prevent radiator
tampering is standard.
• Combination muffler/spark arrestor is standard on the machine.
• Lockable battery disconnect switch provides lockout/tagout capability.
The switch is conveniently located below the control panel.
• Kilowatts available for Multi-Weld® 350 use: 29 kW @ 60 VDC.
• Attractive and durable black paint on base, and front and back panels.
• 12V battery jump-start/battery charge feature is standard. Use cable
connection studs to jump-start or charge a 12 volt utility truck battery with
up to 800 cold-cranking amps. Or, use the studs to jump-start the
QUALITY AND RELIABILITY
• Dependability and long life are aided by all-copper windings in rotors
and stators with high quality insulation.
• Printed circuit boards are environmentally-shielded using Lincoln
Electric’s engineered potting and protective frame trays.
• Simple wire harnessing keeps connections to a minimum forgreater
reliability. Lead and harness strain reliefs on all control connections
help ensure trouble-free performance.
• Engine protection system includes automatic shutdown for low oil pressure or high engine temperature. Indicator light turns on for
either condition.
• Engine battery indicator light turns on for low/no battery charging.
• Weld output thermal overload light turns on for this condition and
shuts off weld output to protect the welding system components.
• Engine air cleaner and compressor air cleaner both have service
indicators to provide a GO/NO-GO visual indication of useful service life
of the filter.
• Circuit breaker on the 12V battery circuit provides added component
protection.
Air Vantage 800 | [ 4 ]
• Engine has a closed breather system to keep the engine
compartment and ground clean. This system eliminates oil mist from collecting inside the engine compartment, especially on surfaces that would lower engine cooling efficiency.
• Self-bleeding engine simplifies startup if your fuel tank runs dry.
Manual fuel line bleeding is usually not necessary.
• Weather-protective instruction manual container provides storage and
convenient access to equipment operator’s manual.
• Metal shipping skids can be left attached to keep the machine from
resting on damp ground and for easier fork lift transport. The metal
skids can be removed for truck-mounted machines.
• Canadian Standards Association (CSA) certified.
• Manufactured under a quality system certified to ISO 9001
requirements and ISO 14001 environmental standards.
• Three-year Lincoln Electric warranty on welder (engine and
compressor are warranted separately by the manufacturers).
KEY CONTROLS
30
29
28
1
2
27
26
3
4
5
6
7
8
25
24
23
22
21
20
9
10
11
12
19
13
15
16
17
18
14
[ 5 ] | Air Vantage 800
1. Digital Amps and Volts Output Meters
2. Arc Force & Inductance/Pinch Control Dial
3. Weld Mode Selector Switch
4. Engine Idler Switch
5. Start Pushbutton
6. Glow Plug Button
7. Run/Stop Switch
8. Battery Circuit Breaker
9. Fuel Gauge/Engine Hour Meter with Battery Charging and Engine Protection Lights
10. Engine Temperature Gauge 11. Oil Pressure Gauge
12. 120 VAC Receptacles
13. GFCI Modules
14. Covered Weld Output Terminals + and –
15. 120/240 VAC Full-KVA 1-Phase Receptacle
16. Battery Disconnect Switch
17. 240 VAC Full-KVA 3-Phase Receptacle
18. Ground Stud
19. 240V 3-Phase Circuit Breaker
20. 6-Pin Remote Control Connector
21.14-Pin Wire Feeder Connector
22. 42V/115V Wire Feeder Toggle Switch
23. Wire Feeder Circuit Breakers 24. Compressor Hour Meter and Protection Light
25. Compressor ON/OFF Switch
26. Wire Feeder Voltmeter Polarity Switch
27. Welding Terminals Control Switch
28.VRD™ Indicator Lights
29. Output Control Dial
30. Weld Output Thermal Overload Light
COMPRESSOR SPECIFICATIONS
Compressor
Model
VMAC
® (6)
Description
Delivery
Maximum System Pressure
Belt-Driven Rotary Screw Air Compressor
High Idle Mode:
60 SCFM @ 100 PSI
(28.3 liters/sec. @ 7.0 kg/cm
150 PSI
(10.5 kg/cm2)
Compressor
Protection
Capacities
Safety Relief Valve
200 PSI
14.0 kg/cm2
Oil:
1.3 gals (5.0 liters) (7)
High Temperature
Automatic Shutdown
290˚ F (143˚C)
Low Idle Mode:
40 SCFM @ 100 PSI
(18.9 liters/sec. @ 7.0 kg/cm
Warranty is 3 years/3,000 hours whichever comes first for the compressor and 1 year/1,000 hours whichever comes first for the clutch, idler roll and automatic belt tensioner.
VMAC® synthetic compressor oil recommended for best operation results, or oil approved by VMAC®.
(6)
(7)
ENGINE SPECIFICATIONS
Engine
Model
Description
Cummins®
B3.3T (8)
EPA Tier 4i
4 Cylinder, 4 Cycle, Water-Cooled
Turbo-Charged Diesel Engine,
12V Electric Start,
Two-Stage Dry Type Air Cleaner,
Fuel Filter with Water Separator
Horsepower &
Displacement
Dry
Capacities
Operating
Speeds
Fuel
Consumption
69 HP @ 1860 RPM
199 cu. in.
(3.3 liters)
FUEL: 25 gals (95 liters)
OIL: 8.0 qts (7.6 liters)
COOLANT: 16.0 qts. (15.1 liters)
600A Load
with compressor
600A Load
1860 RPM
High Idle
1860 RPM
Low Idle
1500 RPM
3.9 Gal/Hr
14.8 liters/Hr
2.9 Gal/Hr
11.1 liters/Hr
1.1 Gal/Hr
4.2 liters/Hr
0.7 Gal/Hr
2.7 liters/Hr
Cummins® warranty is 3 years/3,000 hours for all components, 3 years/10,000 hours for major components.
(8)
MACHINE SPECIFICATIONS
Product
Name
Ordering
Information
Air Vantage 800
K2961-5
Description
650 Amp DC Welder with
Air Compressor and AC
Generator
12,000 Watts
AC Power
1-Phase
20,000 Watts
AC Power
3-Phase
CC/Pipe/TIG/Gouge
Rated Output (1)
Current/Voltage/Duty Cycle
CV Rated Output (1)
Current/Voltage/Duty Cycle
AC
Power (3)(4)
Dimensions
HxWxL
inches (mm)
Weight
lbs.(kg)
DC Constant Current
At 40° C
650A/44V/100%
700A/42V/100%
800A/36V/100%
DC Constant Voltage (2)
At 40° C
650A/44V/100%
700A/42V/100%
800A/36V/100%
20,000 Watts
60 Hz
36.9 x 28.5 x 77.0
(937 x 724 x 1956)
2018
(915)
30-700 Amps
14-44V
Single Dial
Continuous Control
DC Pipe Current
300A/32V/100%
40-300A
DC Touch Start TIG
250A/30V/100%
20-250 Amps
DC Arc Gouge
800A/36V/100%
90-800 Amps
Wire Feeder Power
120V/60Hz
42V/60Hz
Two 120V Duplex To top of exhaust tube:
45.2 (1149)
GFCI Receptacles
(Sealed GFCI Units)
Metal skid width:
20A Per Duplex
40A Total (5)
28.9 (734)
1-Phase, Full KVA
Receptacle
50A@240V
50A@120V Each
Branch Circuit (5)
3-Phase, Full KVA
Receptacle
50A @ 240V
Single Dial
Continuous Control
60V DC Max OCV
@1860 RPM
High altitude: For maximum rating derate the output 5% for every 1,640 ft. (500 m) above 1,312 ft. (400 m). High temperature: For maximum rating derate 2 volts for every 21°F (10°C) above 104°F (40°C).
(2) DC constant voltage capability provides convenience and added safety when welding in electrically hazardous conditions.
(3) When welding, available auxiliary power will be reduced. Output voltage is within +/- 10% at all loads up to rated capacity.
(4) 120V will operate either 60 Hz or 50/60 Hz power tools, lights, etc.
(5) Circuits cannot be wired in parallel to operate the same device.
(1)
Air Vantage 800 | [ 6 ]
RECOMMENDED ACCESSORIES
GENERAL OPTIONS
120V
Power Plug Kit (20A)
Provides four 120V plugs rated
at 20 amps each, and one dual
voltage, full KVA (1-phase) plug
rated at 120/240V, 50 amps. 120V
plug may not be compatible with
common household receptacles.
Order K802N
Full-KVA Power Plug (1-Phase)
One dual voltage plug rated at
120/240V, 50 amps. NEMA 14-50P.
Order T12153-9
Full-KVA Power Plug (3-Phase)
One plug rated at 240V, 50 amps.
NEMA 15-50P.
Order T12153-10
Full-KVA Adapter Kit (1-Phase)
Provides convenient connection of
Lincoln Electric equipment having a
240V AC 1-phase plug (NEMA
6-50P) to the full-KVA receptacle
on Lincoln Electric engine-driven
welders.
Order K1816-1
Shown with optional
K2639-1 Fender &
Light Kit
Large Welder Trailer
For heavy-duty road, off-road, plant
and yard use. Includes pivoting
jack stand, safety chains, and 14
in. (356 mm) wheels. Stiff .120
in. (3.0 mm) welded rectangular
steel tube frame construction is
phosphate etched and powder
coat painted for superior rust and
corrosion resistance. Low sway
suspension gives outstanding
stability with manageable tongue
weight. Wheel bearings are packed
with high viscosity, high pressure,
low washout Lubriplate® grease.
Includes a Duo-Hitch® – a 2 in.
(51 mm) Ball/Lunette Eye
combination hitch. Overall width
60 in. (1524 mm). Overall length
124 in. (3150 mm).
Order:
K2637-2 Trailer
K2639-1 Fender & Light Kit
K2640-1 Cable Rack
Four-Wheeled Steerable Yard Trailer
For off-road, plant and yard use.
Includes an automatically engaging
drawbar lock when the drawbar is
raised to the verticle position. 13 in.
(330 mm) wheels. Wheel bearings
are packed with high viscosity, high
pressure, low washout Lubriplate®
grease. Stiff 3/16 in. (4.8 mm)
welded rectangular steel frame
construction is phosphate etched
and powder-coat painted for
superior rust and corrosion
resistance. Also includes a
Duo-Hitch® – a 2 in. (51 mm) Ball/
Lunette Eye combination hitch.
Overall width 55 in. (1397 mm).
Overall length 124 in. (3150 mm).
Order K2641-2
Air Filter Kit
Reduces water, oil aerosols, oil
vapor and particulates from
compressed air. Also reduces the
risk of rust in tools, tip wear in
plasma cutters and frequency of
tip changes. Mounting bracket and
hose included.
Order K3088-1
Polarity/Multi-Process Switch
For easy polarity switching.
Example: DC-stick root pass on
pipe & DC+ stick for hot, fill and cap
passes. Also for an easy process
change. Example: DC+ stick root
pass on pipe & DC- Innershield® selfshielded flux-cored wire for hot,
fill and cap passes. 6-pin & 14-pin
remote connections can be made
to this unit. For all Lincoln Electric
Chopper Technology® engine-driven
welders. Mounts on roof with
K2663-1 Docking Kit.
Order K2642-1
Docking Kit
Secures the K2642-1 Polarity/MultiProcess Switch to the engine-driven
welder roof. Release latch permits
removal of K2642-1 Polarity/MultiProcess Switch. Made from stainless
steel for rust-free operation.
For all Lincoln Electric Chopper
Technology® engine-driven welders.
Order K2663-1
STICK OPTIONS
Accessory Kit
Includes 35 ft. (10.7 m) 2/0 electrode
cable with lug, 30 ft.
(9.1 m) 2/0 work cable with lugs,
headshield, filter plate, cover plate,
work clamp and electrode holder.
400 amp capacity.
Order K704
TIG OPTIONS
Pro-Torch™ PTA-26V TIG Torch
Air-cooled 200 amp torch (2 piece)
equipped with valve for gas flow
control. 25 ft. (7.6 m) length.
Order K1783-9
Magnum Parts Kit for
PTA-26V TIG Torch
Provides all the torch accessories
you need to start welding. Includes
collets, collet bodies, a back cap,
alumina nozzles and tungstens in a
variety of sizes, all packaged in an
easy to carry reclosable sack.
Order KP509
Foot Amptrol™
Varies current while welding for
making critical TIG welds and crater
filling. Depress pedal to increase
current. Depressing pedal fully
achieves maximum set current.
Fully raising the pedal finishes the
weld and starts the afterflow cycle
on systems so equipped. Includes 25
ft. (7.6 m) control cable.
Order K870
Hand Amptrol™
Provides 25 ft. (7.6 m) of remote
current control for TIG welding.
(6-pin plug connection). Velcro
straps secure torch.
Order K963-3 (one size fits all
Pro-Torch™ TIG Torches)
Square Wave TIG 200
This 46 lb (21 kg) TIG and stick
welder includes adjustable AC
Frequency Control and AC Balance
for great results on aluminum, pulse
mode and 120V or 230V input power
capability.
Order K5126-1
WIRE FEEDER OPTIONS
Wired Remote Control
Includes detachable 125 ft. (38.1
m) cable. Customizable MIN/MAX
Range.
Order: K4330-1
Wired Remote Control with
Auxiliary Power
Includes a 115V duplex receptacle
to power lights and tools. 25 ft.
(38.1 m) cable. Customizable MIN/
MAX Range.
Order K4268-1
Air Vantage 800 | [ 7 ]
LN-25 Ironworker™ Wire Feeder ortable CV unit for flux-cored
P
and MIG welding with MAXTRAC®
wire drive system. Includes digital
meters for wire feed speed/
amperage and voltage, gas solenoid,
internal contactor and 5/64 in. (2.0
mm) drive roll kit for cored wire.
Has 83% reduced wire feed speed
capability for 6 o’clock pipe welding
with Innershield® wire.
Order K2614-9
RECOMMENDED ACCESSORIES
WIRE FEEDER OPTIONS, CONT’D.
K126 PRO Innershield® Gun
For LN-25
For self-shielded wire with 15 ft.
(4.5 m) cable. For .062-5/64 in.
(1.6-2.0 mm) wire. Includes
K466-10 Connector Kit.
Order K126-12
Magnum PRO 350 Ready-Pak® 15 ft.,
.035-5/64 in. For LN-25
Magnum PRO MIG/flux-cored
welding guns are rated 100%
duty cycle. The guns are designed
for high amperage, high duty
cycle applications in extreme
environments where heat
resistance and fast serviceability
are key.
Order K2652-2-10-45
Drive Roll and Guide Tube Kit
For LN-25
For .035 in. and .045 in.
(0.9-1.1 mm) solid steel wire.
Order KP1696-1
SG Control Module
The interface between the power
source and the spool gun. Provides
control of the wire speed and gas
flow. For use with a spool gun.
Order K488
FlexFeed™ 74 HT Wire Feeder
Heavy duty industrial
semiautomatic wire feeder for
general and structural fabrication.
Order K3883
Input Cable
(For SG Control Module)
For Lincoln Electric power sources
with 14-pin MS-type connection,
separate 115V NEMA receptacles and
output stud connections.
Order K691-10
Magnum SG Spool Gun
Hand-held semiautomatic wire
feeder. Requires SG Control Module
and Input Cable.
Order K487-25
PLASMA CUTTING
Tomahawk® 1000
Cuts metal using the AC generator
power from the engine-driven
welder. Requires the T12153-9
Full-KVA Power Plug (1-Phase).
Order K2808-1
Drive Roll and Guide Tube Kit
For LN-25
For .068-.072 in. (1.7-1.8 mm) cored
or solid steel wire.
Order KP1697-068
For best welding results with Lincoln Electric equipment, always use Lincoln Electric consumables. Visit www.lincolnelectric.com for more details.
Manufactured at a facility with certified ISO Quality and Environmental Management Systems.
CUSTOMER ASSISTANCE POLICY
The business of The Lincoln Electric Company is manufacturing and selling high quality welding equipment, consumables, and cutting equipment. Our challenge is to meet the needs of our customers and to exceed their expectations. On
occasion, purchasers may ask Lincoln Electric for information or advice about their use of our products. Our employees respond to inquiries to the best of their ability based on information provided to them by the customers and the knowledge
they may have concerning the application. Our employees, however, are not in a position to verify the information provided or to evaluate the engineering requirements for the particular weldment. Accordingly, Lincoln Electric does not warrant
or guarantee or assume any liability with respect to such information or advice. Moreover, the provision of such information or advice does not create, expand, or alter any warranty on our products. Any express or implied warranty that might
arise from the information or advice, including any implied warranty of merchantability or any warranty of fitness for any customers’ particular purpose is specifically disclaimed. Lincoln Electric is a responsive manufacturer, but the selection and use of specific products sold by Lincoln Electric is solely within the control of, and remains the sole responsibility of the customer. Many variables beyond the control of Lincoln
Electric affect the results obtained in applying these types of fabrication methods and service requirements.
Subject to Change – This information is accurate to the best of our knowledge at the time of printing. Please refer to www.lincolnelectric.com for any updated information.
The Lincoln Electric Company
22801 St. Clair Avenue • Cleveland, OH • 44117-1199 • U.S.A.
www.lincolnelectric.com