MELAMINE CABINET
page 1 of 3
Krylon® Dual® Superbond® Paint + Primer has
something new in store for your storage cabinet.
PROJECT TIME
3 hours
SKILL LEVEL
1
2
3
4
5
MATERIALS
Krylon® Dual® Superbond®
Paint + Primer
Classic Gray
1-1/2" painter’s tape
Ruler
Pencil
Screwdriver or other tools required
to remove cabinet doors
INSTRUCTIONS
1
Remove cabinet doors.
2
Using an all-purpose cleaner/degreaser, wipe down
the entire cabinet to remove all dirt and grime.
Rinse thoroughly with water and allow to dry.
3
If you do not want to paint the interior of your
cabinet, remove the shelves. Mask the interior
area with paper and tape to secure.
4
Applying in a well-ventilated area, begin painting at
the top of the cabinet, holding the can of Gloss Classic
Gray 6-8 inches from the surface and paint using a
sweeping side-to-side motion with slight overlap.
5
Allow paint to dry for 30-60 seconds.
6
Continue to apply light, multiple coats, waiting 30-60 seconds
between each, until you are satisfied with the appearance.
Drop cloth
Paper for masking (optional)
(continued on next page)
MELAMINE CABINET
page 2 of 3
Krylon® Dual® Superbond® Paint + Primer has
something new in store for your storage cabinet.
PROJECT TIME
3 hours
SKILL LEVEL
1
2
3
4
5
INSTRUCTIONS
CREATING THE PINSTRIPE ON THE DOORS:
7
To create the pinstripe design on the front of the
doors, measure from the edges of the doors and
mark distances with a pencil. You may want to
draw a line, using your ruler and pencil, that you
can follow with your 1-1/2" painter’s tape.
8
Once you’ve marked off the measurements for the
pinstripe, carefully apply the painter’s tape, ensuring
it remains straight and follows your measurements. You
may want to prop the doors next to each other to check
on the alignment of the pinstripe across the two doors.
9
Press the tape firmly to the surface, making
sure the edges are adhered.
10
Begin painting at the top of the doors, holding the can of
Gloss Classic Gray 6-8 inches from the surface and paint
using a sweeping side-to-side motion with slight overlap.
(continued on next page)
MELAMINE CABINET
Krylon® Dual® Superbond® Paint + Primer has
something new in store for your storage cabinet.
PROJECT TIME
3 hours
SKILL LEVEL
1
2
3
4
5
INSTRUCTIONS
11
Allow paint to dry for 30-60 seconds.
12
Continue to apply light, multiple coats,
waiting 30-60 seconds between each, until
you are satisfied with the appearance.
13
Once you have achieved the appearance you
want, carefully remove the painter’s tape while
the paint is still fresh, within 20 minutes.
14
Krylon Dual Superbond dries in 25 minutes or less, and can be handled in about one hour.
15
Once fully dried, put the inside shelving back into place and reattach the doors.
page 3 of 3