Adjustable Suspension Hanger Technical Datasheet
Description
The Adjustable Suspension Hangers Clip are a component of the Keylock Ceiling System. The upper vertical side of
the hanger allows the Suspension Rod that goes through it to be adjusted in accordance to your preferred height.
The lower side of the hanger is specially designed and manufactured in order to provide a vertical support to the
loads that hang from the ceiling (i.e. ceiling tile frame).
Primary Data
Drywall Product
Adjustable Suspension Hanger
Drywall System
Applicable for Keylock Ceiling System
Coating
Zinc Plated
Steel Grade
G43A
Min. Yield Strength: 210 Mpa
Min. Tensile Strength: 320 Mpa
Material
Galvanized Steel
Technical Data
Part No.
Thickness
(mm)
Mass
(Kg)
PN2534
0.85
0.029
PN.2534
Top Cross Rail
PN. 2534
Typical Application
Doc/PDS/FC/ASH/12/R0
Backing Rod Technical Datasheet
Description
The Backing Rod is a cylindrical polyurethane or polyethylene foam material is often used to provide extra support
and set the proper depth of material for sealants in expansion and construction joints including tilt slab
construction.
Primary Data
Drywall Product
Backing Rod
Drywall System
Applicable for all Drywall Systems
Standard Length (meters)
200/ 500
Color
White & Grey
Material
Polyethylene Foam
Technical Data
Diameter
(mm)
Length
(meter)
Density
(g/cm3)
10
500
0.04
20
200
0.04
Doc/PDS/FC/BR/12/R0
Column Encasement Clip Technical Datasheet
Description
The Column Encasement Clip is designed to be used with the Furring Channel Track in order to encase a clanged
column (I- Beam) up to 16 mm flange thickness.
Primary Data
Drywall Product
Beam Encasement Clip
Drywall System
Applicable for Liner System
Coating
AZ150 Zinc- Aluminium Alloy
Steel Grade
G550
Min. Yield Strength: 550 Mpa
Min. Tensile Strength: 550 Mpa
Material
Galvanized Steel
Technical Data
Part No.
Thickness
(mm)
Mass
(Kg)
MBCL
1.05
0.075
RONDO Column Encasement
Clip @ 800mm centers max.
I-Section steel column flange
Continuous RONDO PN.140
Furring Channel Track
Plasterboard as required
Typical Application
Doc/PDS/FC/CEC/12/R0
Direct Fixing Clip (Beta Fix) Technical Datasheet
Description
The adjustable Direct Fixing Clips - Betafix are a component of the Keylock Ceiling System. The Adjustable Direct
Fixing Clip is used as a direct fixing of furring channels and battens to either concrete, steel or timber wall or ceiling
structures. These clips need to be fixed along the sections in accordance with the relevant maximum span tables.
Masonry fasteners should be selected in accordance to specific recommendations.
Primary Data
Drywall Product
Direct Fixing Clip (Beta Fix0
Drywall System
Applicable for Keylock Ceiling System
Coating
Z180 Zinc Coating
Steel Grade
G2
Min. Yield Strength: 270 Mpa
Min. Tensile Strength: 330 Mpa
Material
Galvanized Steel
Technical Data
Part No.
Thickness
(mm)
Mass
(Kg)
Betafix
1.55
0.038
Doc/PDS/FC/DFCBF/12/R0
Direct Fixing Clip with Anchor Technical Datasheet
Description
The Direct Fixing Clip with Anchor is an ideal component for battening out irregular walls. For surafces that do not
require any allignment but would require a cavity for cables or plumbing, the Battens should be used. These clips are
used as a direct fixing of furring channels and battens to either concrete, steel or timber wall or ceiling structures.
The Direct Fixing Clips need to be fixed along the sections in accordance with the relevant maximum span tables.
Primary Data
Drywall Product
Direct Fixing Clip with Anchor
Drywall System
Keylock Ceiling System & Liner System
Coating
AZ150 Zinc- Aluminium Alloy
Steel Grade
G300
Min. Yield Strength: 300 Mpa
Min. Tensile Strength: 340 Mpa
Material
Galvanized Steel
Technical Data
Part No.
Thickness
(mm)
Mass
(Kg)
A239
1.25
0.050
PN.
239A
Furring
Channel
Typical
Application
Doc/PDS/FC/DFCWA/12/R0
Furring Channel Anchor Clip Technical Datasheet
Description
Furring Channel Anchor Clips are the ideal component for battening out regular walls and for surfaces which do not
require any alignment.
Primary Data
Drywall Product
Furring Channel Anchor Clip
Drywall System
Applicable to Keylock Ceiling System
Coating
AZ150 Zinc- Aluminium Alloy
Steel Grade
G300
Min. Yield Strength: 300 Mpa
Min. Tensile Strength: 340 Mpa
Material
Galvanized Steel
Technical Data
Part No.
Thickness
(mm)
Mass
(Kg)
237
1.25
0.028
239
1.25
0.030
Furring Channel
Typical
Application
Doc/PDS/FC/FCAC/12/R0
Furring Channel Joiner Technical Datasheet
Description
The Furring Channel Joiners are a component of the Keylock Ceiling System, whereby it joins the Furring Channels
from end to end.
Primary Data
Drywall Product
Furring Channel Joiner
Drywall System
Applicable to Keylock Ceiling System
Coating
AZ150 Zinc- Aluminium Alloy
Steel Grade
G300
Min. Yield Strength: 300 Mpa
Min. Tensile Strength: 340 Mpa
Material
Galvanized Steel
Technical Data
Part No.
Thickness
(mm)
Mass
(Kg)
138
0.85
0.047
PN.138
Furring Channel
PN. 138
Typical Application
Doc/PDS/FC/FCJ/12/R0
Head Bracket Technical Datasheet
Description
The Head Brackets consist of a U–shaped stamped steel body part with 2 holes on each side of the flanges into
which necked vibration break rubbers are fitted allowing for dampened connections to the Z-Z-Stud through the
corresponding holes in the Z-Z-Studs by the means of 2 heavy bolts embedded in necked rubbers.
Primary Data
Drywall Product
Head Bracket
Drywall System
Applicable for Cinema System
Material
GI or Painted MS
Technical Data
Thickness
No. of Holes
Hole Dimension
(mm)
Hole Centre
(mm)
4
2
20
60
Doc/PDS/FC/HB/12/R0
Hex Head Screws Technical Datasheet
Description
Hex Head Screws are self drill point zinc plated screws for heavy gauge metal to metal fastening from 0.7mm to Max.
2.5mm thick.
Primary Data
Drywall Product
Hex Head Screws
Drywall System
Applicable for Partition, Liner & Cinema System
Standard Compliance
AS 3566-1988
Coating
Yellow Zinc finish, white or black phosphated
Technical Data
Sizes
M4.8 x 19 DP
M4.8 x 25 DP
M4.8 x 32 DP
M4.8 x 50 DP
M5.5 x 25 DP
M5.5 x 32 DP
M5.5 x 50 DP
Doc/PDS/FC/HHS/12/R0
KDM/L Anchors Technical Datasheet
Description
High wrench resistant 6 mm diameter anchor made of a special steel shaft and cone for forced expansion. The shaft
is threaded on one side and has an expansible split part on the other side. Suitable for Fire Rated Systems. They are
specially used for fixing of hangers, brackets, and all kind of drywall profiles to concrete slabs where high work load,
safety and extreme rapidity of installation is required.
Primary Data
Drywall Product
KDM/L Anchors
Drywall System
Applicable for all Drywall Systems
Standard Compliance
ETA 04/0026
Pull Out Work Load
1.41 KN
Shear Load (Cutting Strength)
5.16 KN
Technical Data
Sizes
(mm)
6 x 40
Doc/PDS/FC/KDMLA/12/R0
KDM/N Anchors Technical Datasheet
Description
KDM-N Anchors are a high wrench resistant [6 mm x 65 mm] anchor made of a special steel shaft and cone for
forced expansion. The shaft is threaded on one side and has an expansible split part on the other side. Suitable for
fire-rated systems.
Primary Data
Drywall Product
KDM/N Anchors
Drywall System
Applicable for all Drywall Systems except Ceiling System
Standard Compliance
ETA 04/0026
Pull Out Work Load
1.41 KN
Shear Load (Cutting Strength)
5.16 KN
Technical Data
Sizes
(mm)
6 x 65
Doc/PDS/FC/KDMNA/12/R0
KMU/L Anchors Technical Datasheet
Description
High wrench resistant 6 mm diameter anchor made of a special steel shaft and an internal 6 mm thread part and a
cone for forced expansion. The shaft is threaded on one side and has an expansible split part on the other side.
Suitable for Fire Rated Systems. For suspensions from concrete slabs by the means of threaded rods to brackets
supporting all kinds of drywall profiles where high work-load, safety and extreme rapidity of installation is required.
Primary Data
Drywall Product
KMU/L Anchors
Drywall System
Applicable for Ceiling System
Standard Compliance
ETA 04/0026
Pull Out Work Load
1.41 KN
Shear Load (Cutting Strength)
5.16 KN
Technical Data
Sizes
(mm)
6 x 40
Doc/PDS/FC/KMUL/12/R0
KSD Plugs Technical Datasheet
Description
Shear-load resistant 6 mm diameter plug made of 'Sherard' zinc quoted spring steel consisting of a lengthwise cut
cylinder with a nail like outline. It is a one piece 'hammer-in' type fastener suitable for shear-load only. They are
commonly used for fixing of Drywall Profiles to bottom concrete slabs only. They are also used for fixing of wall
angles to peripheral concrete walls.
Primary Data
Drywall Product
KSD Plugs
Drywall System
Applicable for Partition, Ceiling or Liner System
Mechanical Resistance to Wrenching
2.7 KN (Concrete B 45)
Technical Data
Sizes
(mm)
6 x 30
6 x 40
Doc/PDS/FC/KSD/12/R0
Laminating Screws Technical Datasheet
Description
Laminating Screws are fasteners for directly laminating gypsum boards together when used in more than 2 layers as
well as fastening accessories to multiple gypsum board layer linings.
Primary Data
Drywall Product
Laminating Screws
Drywall System
Applicable for Partition, Shaftwall & Cinema System
Coating
Yellow(white) Zinc Finish/ Black Phosphated
Rust Protection
Anti- corrosion treatment by yellow zinc coating/
phosphate process
Standard Compliance
ASTM C1002 - 98
Technical Data
Sizes
(mm)
M4.2 x 32CS
M4.2 x 38CS
Doc/PDS/FC/LS/12/R0
L Bracket Technical Datasheet
Description
The L Bracket is a simple rigid structure in the shape of an L, one arm fixed to a vertical ( Stud ) surface, the other
projecting horizontally fixed to the support such as Wall, Ceiling or Slab.
Primary Data
Drywall Product
L Bracket
Drywall System
Applicable for Partition & Liner System
Coating
Z180 Zinc Coating
Steel Grade
G2
Min. Yield Strength: 270 Mpa
Min. Tensile Strength: 330 Mpa
Material
Galvanized Steel
Technical Data
Part No.
Thickness
(mm)
Width
(mm)
PN545
1.2
50 x 50
PN546
1.2
75 x 75
Doc/PDS/FC/LB/12/R0
Phoenic Hanger Technical Datasheet
Description
The Phoenic Hangers are strong brackets designed in various shapes and dimensions of which the upper or lower
horizontal part presents an inserted vibration rubber part. This disposes an internal threading for a 8 mm threaded
rod which in turn provides an efficient vibration break even at low frequencies, separating acoustically the structure
from the ceiling.
Primary Data
Drywall Product
Phoenic Hanger
Drywall System
Applicable for acoustic Ceiling System
Acoustic Workload
30 to 70 Kg
Safety
An incorporated safety device will retain the threaded rod
suspension system in case of fire and burning off of the rubber. In
this case, the ceiling will descend by 14 mm.
Specifications
Used for acoustic ceiling system consisting of two or three layers o
15mm Firewall panels screw-fixed to Gypsemna furring channels &
backed with a low density 75 to 100 mm fibre glass blanket.
Technical Data
Load
Critical
Frequency
Vibration absorption with Phoenic U Hanger in %
Reference frequency in Hz
daN
Hz
23
25
30
35
45
60
80
100
40
14
40
46
69
78
88
93
96
98
Doc/PDS/FC/PH/12/R0
Locking Key Joiner Technical Datasheet
Description
The Locking Key Joiners are a component of the Keylock Ceiling System whereby the Top Cross Rail is connected to
the Furring Channel.
Primary Data
Drywall Product
Locking Key Joiner
Drywall System
Applicable for Keylock Ceiling System
Coating
AZ150 Zinc- Aluminium Alloy
Steel Grade
G300
Min. Yield Strength: 300 Mpa
Min. Tensile Strength: 340 Mpa
Material
Galvanized Steel
Technical Data
Part No.
Thickness
(mm)
Mass
(Kg)
139
0.85
0.018
PN. 139
Typical Application
Doc/PDS/FC/LKJ/12/R0
Self Drilling Screws Technical Datasheet
Description
Heavy duty drill point bugle head screw with head diameter of 8 mm, are self drilling fasteners for multiple layer
drywalls, insulation and accessory mountings on steel structures up to 3.0 mm thickness.
Primary Data
Drywall Product
Self Drilling Screws
Drywall System
Applicable for Drywall Systems
Coating
Yellow/ white Zinc / Black Phosphated Finish
Rust Protection
Anti- corrosion treatment
Standard Compliance
ASTM C1002 - 98
Material
Hardened Steel
Technical Data
Sizes
(mm)
M 3.5 x 35 DP
M 3.5 x 45 DP
M 3.5 x 55 DP
M 4.2 x 70 DP
Doc/PDS/FC/SDS/12/R0
Self Tapping Screws Technical Datasheet
Description
Heavy duty self tapping bugle head screw with head diameter of 8 mm, are self tapping fasteners for multiple layer
drywalls, insulation and accessory mountings on steel structures up to 0.8 mm thickness.
Primary Data
Drywall Product
Self Tapping Screws
Drywall System
Applicable for Drywall Systems
Coating
Yellow/ white Zinc / Black Phosphated Finish
Rust Protection
Anti- corrosion treatment
Standard Compliance
ASTM C1002 - 98
Material
Hardened Steel
Technical Data
Sizes
(mm)
M 3.5 x 25 DP
M 3.5 x 35 DP
M 3.5 x 45 DP
M 3.5 x 55 DP
M 4.2 x 70 DP
Doc/PDS/FC/STS/12/R0
Slotted Web Cleat Technical Datasheet
Description
The Slotted Web Cleat is typically used to transfer loads in external wall situations where a deflection allowance is
needed. It is required as the higher external wall pressures would cause a standard stud/track connection to be
overloaded.
Primary Data
Drywall Product
Slotted Web Cleat
Drywall System
Applicable for Partition System
Coating
Z180 Zinc- Aluminium Alloy
Steel Grade
G2
Min. Yield Strength: 270 Mpa
Min. Tensile Strength: 330 Mpa
Material
Galvanized Steel
Technical Data
Part No.
Length
(mm)
Width
(mm)
Height
(mm)
Mass
(Kg)
SWC3A
125
50
75
0.420
SWC3
80
50
75
0.420
PN. SWC3
PN. SWC3
PN. SWC3a
Doc/PDS/FC/SWC/12/R0
Sound Isolation Clip STSU Technical Datasheet
Description
The Sound Isolation Clip STSU are specially designed as sound insulating systems to reduce sound transmission.
Primary Data
Drywall Product
Sound Isolation Clip STSU
Drywall System
Applicable for Keylock Ceiling System
Coating
AZ150 Zinc- Aluminium Alloy
Steel Grade
G300
Min. Yield Strength: 300 Mpa
Min. Tensile Strength: 340 Mpa
Material
Galvanized Steel
Technical Data
Part No.
Thickness
(mm)
Mass
(Kg)
STSU
1.25
0.060
PN. STSU
Doc/PDS/FC/SICSTSU/12/R0
Sound Isolation Clip STSl Technical Datasheet
Description
The Sound Isolation Clip (STSL) is specially designed for use as sound isolation system to reduce sound transmission.
Primary Data
Drywall Product
Sound Isolation Clip STSL
Drywall System
Applicable for Partition, Lining & Ceiling System
Coating
AZ150 Zinc- Aluminium Alloy
Steel Grade
G300
Min. Yield Strength: 300 Mpa
Min. Tensile Strength: 340 Mpa
Material
Galvanized Steel
Technical Data
Part No.
Thickness
(mm)
Mass
(Kg)
STSL
1.25
0.100
PN. STSL
Doc/PDS/FC/SICSTSL/12/R0
Staggered Wall Clip Technical Datasheet
Description
Staggered Wall Clips are designed to provide effective resistance to sound transmission and acoustic impact when
lining boards are attached in various configurations. For ease of installation, place holding clips at the top and
bottom of each stud then slide the studs and clips onto the tracks.
Primary Data
Drywall Product
Staggered Wall Clip
Drywall System
Applicable for Partition System
Coating
AZ150 Zinc- Aluminium Alloy
Steel Grade
G550
Material
Galvanized Steel
Technical Data
Part No.
PN126
PN152
Doc/PDS/FC/SWC/12/R0
Suspension Rod Angle Bracket Technical Datasheet
Description
Suspension Rod Angle Brackets are attached to the slab of the ceiling from one side and to the Suspension Rods
from the other side.
Primary Data
Drywall Product
Suspension Rod Angle Bracket
Drywall System
Applicable for Keylock Ceiling System
Coating
AZ150 Zinc- Aluminium Alloy
Steel Grade
G300
Min. Yield Strength: 300 Mpa
Min. Tensile Strength: 340 Mpa
Material
Galvanized Steel
Technical Data
Part No.
Thickness
(mm)
Mass
(Kg)
247
1.25
0.018
274
1.25
0.018
Bracket Part No. 274
fixed to trusses
Typical Application
Typical Application
Doc/PDS/FC/SRAB/12/R0
Suspension Rod Technical Datasheet
Description
The Suspension Rods are a component of the Keylock Ceiling System, whereby they are cut into the desirable length
and then attached to the Suspension Rod Angle Bracket from one end and then into the Adjustable Suspension
Hanger clip from the other end.
Primary Data
Drywall Product
Suspension Rod
Drywall System
Applicable for Keylock Ceiling System
Coating
Zinc Plated
Steel Grade
G43A
Min. Yield Strength: 210 Mpa
Min. Tensile Strength: 320 Mpa
Material
Galvanized Steel
Technical Data
Part No.
Thickness
(mm)
Length
(mm)
Mass
(Kg)
121
5
3600
0.554
PN. 121
Doc/PDS/FC/SR/12/R0
Threaded Rod Technical Datasheet
Description
The Threaded Rods are designed to be used in high tension due to being relatively long rods and being threaded.
They are used as a ceiling suspension by being fixed to hard point on one end such as soffit of concrete slab/beam or
steel structure with appropriate fasteners and ceiling frame on the other.
Primary Data
Drywall Product
Threaded Rod
Drywall System
Applicable for Keylock Ceiling System
Coating
Zinc Plated
Steel Grade
G43A
Min. Yield Strength: 210 Mpa
Min. Tensile Strength: 320 Mpa
Material
Mild Steel
Technical Data
Part No.
Thickness
(mm)
Length
(mm)
Mass
(Kg)
M1493000/
MATR30008ZP
6
2000
0.300
Doc/PDS/FC/TR/12/R0
Wafer Head Screws Technical Datasheet
Description
Heavy duty drill point wafer head screw with head diameter of 11 mm. These screws are self drilling framing screws
for thicknesses up to 2.5 mm. Heavy duty self drilling Wafer Head Screws are used for rapid power attachment of a
steel framing member to another.
Primary Data
Drywall Product
Wafer Head Screws
Drywall System
Applicable for all Drywall System
Coating
Yellow/ White Zinc
Material
Hardened Steel
Standard Compliance
ASTM C 1002- 98
Technical Data
Size
M4.2 x 13 DP
Doc/PDS/FC/WHS/12/R0
C Clamp Technical Datasheet
Description
The C-Clamp is a strong bracket to hold the main channel for suspended ceilings of limited loads by the means of 6
mm & 8 mm threaded rod. It will accommodate a 38 mm & 45mm main channel allowing for structural suspension
centre’s.
Primary Data
Drywall Product
C Clamp
Drywall System
Applicable for Ceiling System & Cinema System
Coating
Z150 Zinc Coating
Technical Data
Height
(mm)
Flange
(mm)
Width
(mm)
Thickness
(mm)
40
35
30
0.55
Doc/PDS/FC/CC/12/R0
Sound Isolation Clip STWC Technical Datasheet
Description
The Sound Isolation Clip is specially designed for use as sound isolation system to reduce sound transmission.
Primary Data
Drywall Product
Sound Isolation Clip STWC
Drywall System
Applicable for Partition & Liner System
Coating
AZ150 Zinc- Aluminium Alloy
Steel Grade
G300
Min. Yield Strength: 300 Mpa
Min. Tensile Strength: 340 Mpa
Material
Galvanized Steel
Technical Data
Thickness
(mm)
Mass
(Kg)
1.25
0.060
Doc/PDS/FC/SICSTWC/12/R0
Acoustic V-braze Technical Datasheet
Description
The Acoustic V-braze is a specially engineered product for bracing twin frame Drywall partitions. V-braze made with
Spring steel to optimize acoustic performance on the Dry Wall System.
Primary Data
Drywall Product
Acoustic V-braze
Drywall System
Applicable for Partition & Liner System
Coating
AZ150 Zinc- Aluminium Alloy
Steel Grade
G300
Min. Yield Strength: 300 Mpa
Min. Tensile Strength: 340 Mpa
Material
Galvanized Steel
Technical Data
Doc/PDS/FC/AV/12/R0
Direct Fixing Clip-Furring Channel Technical Datasheet
Description
The Direct Fixing Clip for Furring Channel is an ideal component for battening out Structural / Timber - Walls &
Ceilings. For surfaces that require cladding the walls with gypsum boards & require a cavity for cables or plumbing,
this clips can be used. These clips are used as direct fixing for furring channels to either steel wall frame or timber
ceilings. The Direct Fixing Clips need to be fixed along the sections in accordance with the manufacturer’s
recommendations.
Primary Data
Drywall Product
Direct Fixing Clip for Furring Channel
Drywall System
Applicable for Ceiling & Liner System
Coating
AZ150 Zinc- Aluminium Alloy
Steel Grade
G300
Min. Yield Strength: 300 Mpa
Min. Tensile Strength: 340 Mpa
Material
Galvanized Steel
Technical Data
Part No.
Thickness
(mm)
Mass
(Kg)
PN394
1.05
0.027
PN226
1.05
0.070
PN.226
PN.394
Furring Channel
Furring Channel
Doc/PDS/FC/DFCFFC/12/R0