Declaration of Conformity
Equipment Type(s): Network Security Devices AC8200, SG8200
NSB-8200-XATT-OAU, NSB-8200-XATT-OEU, NSB-8200-XATT-OJP, NSB-8200-XATT-OUK,
NSB-8200-XATT-OUS, NSB-8200-XATT-USG, NSB-8200-XATT-OAU, ASB-8200-XATT-OAU,
ASB-8200-XATT-OEU, ASB-8200-XATT-OJP, ASB-8200-XATT-OUK, ASB-8200-XATT-OUS,
ASB-8200-XATT-USG, ASB-8200-XATT-OAU
The equipment described above is declared to be in conformity with the following applicable national and
international standards. The conformity is valid ONLY when the equipment is used in a manner consistent
with the manufacturer’s recommendations and the reference documents.
Document Reference No.
Title
IEC 60950-1 – 2ed Edition
UL60950-1/CSA C22.2 No. 60950-1, 2nd
Edition
Title 47 of the CFR, Part 15, Class A
ICES-003 Issue 4, February 7, 2004 Class
A
VCCI V-1/07.09, V-2/08.04, V-3/08.04,V4/07.04 ClassA
EN 55022:2006
EN 61000-3-2:2006
EN 61000-3-3:1995 + A1:2001
EN 55024: 1998 + A1:2001 + A2:2003
EN 61000-4-2: 1995 + A1: 1998 + A2:
2001
EN 61000-4-3: 2006
EN 61000-4-4: 2004
EN 61000-4-5: 2006
EN 61000-4-6: 2007
EN 61000-4-11: 2004
Information Technology Equipment
Information Technology Equipment
Radio Frequency Devices – subpart B- Unintentional Radiators
Interference-Causing Equipment Standards – Digital Apparatus
Information Technology Equipment
Information Technology Equipment
Information Technology Equipment Harmonic Current Emissions
Information Technology Equipment Voltage Fluctuations/Flicker
Information Technology Equipment
Information Technology Equipment ESD
Information Technology Equipment Radiated Immunity
Information Technology Equipment EFT/B Immunity
Information Technology Equipment Surge
Information Technology Equipment Conducted Immunity
Information Technology Equipment Voltage Interrupts/Dips
Regions for which Conformity is Declared
European Economic Area (EEA): Accelerated Concepts, Inc. declares, where applicable, the equipment is in
compliance with the essential requirements of EC Council Directives 2006/95/EC (Safety /Low Voltage),
2004/108/EC (EMC), 1999/5/EC (R&TTE), 2011/65/EU (RoHS 2).
USA: Accelerated Concepts Inc. (address below) make this DoC as Responsible Party for Network Security
Device
Canada: Accelerated Concepts Inc. (address below) is the Declaring Party for equipment registered with Industry
Canada
Any other region where the regulatory requirements are satisfied by compliance to the standards declared above.
This Declaration of Conformity is issued by Accelerated Concepts, which is solely responsible for the declared
compliance.
Place of Issue / Declaring
Company Address:
Accelerated Concepts Inc
4017 W. Martin Luther King Jr. Blvd.
Tampa, Florida, 33614 USA
TEL: 1- (813) 983-7635
Date of Issue: June 1, 2015
Name: Tom Butts is the Manufacturer’s Representative, with the authority
of Accelerated Concepts management to make this Declaration.
520117-04