Data sheet for KL2827, Version 2.0
Sixteen channel digital output terminal with flat ribbon cable connection, 24 VDC
The KL2872 digital output terminal offers a very compact design with its 16 channels. A 20-pin connector
enables the secure connection of plug connectors using insulation displacement contact, as is usual for
ribbon cables and special round cables. This significantly simplifies the wiring of many channels. State-ofthe-art output drivers guarantee minimum power dissipation. 16 LEDs display the logical signal states of the
outputs.
Technical data
Number of
Rated load voltage
Load type
Output current per channel (short circuit proof))
Short circuit current
Breaking energy per channel (inductive)
Switching to
Reverse voltage protection
Electrical isolation
Current consumption from K-Bus
Bit with in the process image
Configuration
Weight
Dimensions (w x h x d)
permissible ambient
during operation
temperature range
during storage
permissible relative humidity
Mounting position
Vibration/shock resistance
EMC resistance burst/ESD
Protection class / Approval
KL2872-0000
KL2872-0010
16
24 VDC (-15% / +20%)
ohmic, inductive, lamp load
max. 0,5 A
0,6 ... 1,0 A
max. 150 mJ
24 V
Ground
yes
500 Vrms (K-Bus/field potential)
typically 5 mA
16 output bits
no address or configuration setting
app. 55 g
15mm x 100mm x 70mm (aligned width 12mm)
-0°C ... +55°C
-25°C ... +70°C
5% ... 95%, no condensation
conforms to EN60068-2-6 / EN60068-2-27, EN60068-2-29
conforms to EN61000-6-2 / EN61000-6-4
variable
IP20 / CE
Beckhoff® and EtherCAT are registered trademarks of Beckhoff. Information is subject to change without notice and warranted only to the extent agreed in the terms
of contract. Beckhoff Automation GmbH, Eiserstr. 5, 33415 Verl, Germany, Tel.: +49 (0) 5246 963 0, Fax.: +49 (0) 5246 963 149, http://www.beckhoff.com
Data sheet for KL2827, Version 2.0
2.54 mm
Dimensions of the terminal's 20-pin connector (male) and the corresponding plug (female)
2.54 mm
6.1 mm
30 mm
19 20
1
3.8 mm
2
2
9 x 2.54 = 22.86 mm
1
20 19 1.1 mm
Beckhoff® and EtherCAT are registered trademarks of Beckhoff. Information is subject to change without notice and warranted only to the extent agreed in the terms
of contract. Beckhoff Automation GmbH, Eiserstr. 5, 33415 Verl, Germany, Tel.: +49 (0) 5246 963 0, Fax.: +49 (0) 5246 963 149, http://www.beckhoff.com