Office of the Chairman IMC of Industrial Training Institute, Udhampur.
RE-TENDER NOTICE.
This Industrial Training Institute intends to purchase Tools, Machinery and
Equipments for use in the trades fall under PPP mode for which tenders are invited. The
manufactured/authorized Suppliers may obtain list of items with detailed specifications
from the office of the undersigned on any working day after the publication of this
notice in the News paper or can be download from www.jkdte.Org. Sealed tenders
affixed with revenue stamps worth Rs. 5-00 (Rs. Five only) should reach to this office
within 21 days by or before14-07-2010.
The Tender should be accompanied with the earnest money of Rs. 5000-00 (Rs.
Five thousand only) in the shape of CDR/FDR pledged to the undersigned of any
scheduled bank which remain with Office till full supply is executed by the firm’s per
supply order.
Terms and conditions.
1
2
3
4
5
6
7
8
The rates on tenders should be quoted neat and clean and without any cutting
and over writing.
The rates quoted F.O.R. destination.
The specification and make should be mentioned clearly and separately on the
quotations, otherwise the rates will not be treated as genuine .
The Institute reserves the right to accept or reject any quotation without
assigning any reasons thereof.
In case the supplier fails to supply the ordered material in full, penalty of 2%of
the total cost of the order will be imposed upon him.
The supplier has to deliver the goods in two weeks from the date of issue of
supply order. / This can be altered depending upon the requirements of the
Institution.
The rates should be strictly quoted exclusive of all taxes (VAT, Entry Tax if any
other taxes etc. be quoted with each item).
The tender will be opened on 20-07-2010 by the IMC Institution purchase
committee. The tenderness are advised to remain present at the tender
opening time.
Sd/Member Secretary,
IMC ITI Udhampur.
No:- ITI/U/IMC/ 304-07
Dated:- 23/6/2010
Copy to the:1.
2.
Chairman IMC C/O Everest House for information.
Director, Technical Education, J&K, Srinagar for information.
1
3. Deputy Director, Technical Education, Jammu for information.
4. Joint Director Information Department Jammu with the request to publish
this notice in the Newspaper preferably Daily Excelsior and State Times.
Annexure-A to Tender Notice No.ITI/U/IMC/304-07 dated: 23/6/2010
S.No. Name of item with specification
Rate
1.
Surface plate 400x400mm 1” (Thick ISI
Make)
2.
Scribing block universal 300mm
do-
3.
Hand vice jaw 50 mm PYE Make
4.
File flat smooth 200 mm
Make
5.
File half round rough 300 mm
6.
File square rough 250 mm
-do-
7.
File square smooth 200 mm
-do-
8.
File triangular rough 250 mm
-do-
9.
File flat rasp 250 mm
-do-
10.
File triangular smooth 200 mm
11.
Chisel cold flat 20 mmx300 mm
12.
Chisel cross cut 6x150mm IS 402 -do-
13.
Chisel round nose 3x150xx IS:402 -do-
14.
Chisel diamond point 6x150mm
15.
Tap and die set to cut BSP thread -do-
16.
Punch letter set
-do-
17.
Punch number set
-do-
-
Nelson
-do-
-do-do-
-do-
2
18.
Chase wedge 50mm
-do-
19.
Dresser lead 350x50mm
-do-
20.
Stick setting in 350x50mm
Make
ISI
21.
Saw plumber 300mm
ISI Make
22.
Spanner monkry upto 50mm
Taparia/PYE make
23.
Cutter pipe wheel type 6mm to 25mm do-
24.
Pipe jointer, lead, universal
do-
25.
Oil stone 150mmx50mmx25mm
ISI Make
26.
Soldering iron, opper fit, fire heated
hatched straight 500 gms.
ISI Make
27.
Snip straight 250mm ISI Make
28.
Try square 200mm
29.
Inside caliper 150mm -do-
30.
Caliper outside 150mm -do
31.
Odd leg caliper 200mm –do-
32.
Tenon saw
Nelson Make
33.
Handsaw
-do-
34.
Mortice chisel
PYE Make
35.
Firmer chisel
-do-
36.
Mallet medium IS: 2922 ISI Make
-
PYE Make
3
37.
Jack plane
Make
PYE/Taparia
38.
Pliers combination 200mm -do-
39.
Blow lamp 500 millilitre
40.
Pipe opener
Make
41.
Washer cutter
Make
Taparia/PYE
42.
Pressing stock
-do-
43.
Mandrel
Make
44.
plumber kit containing tampin bent pin
plumber hammers dressers, mallets,
chase wedges, draw knife and step
turner
ISI Make
45.
Long Nose Plier 150mm
46.
Side cutter 150mm
-do-
47.
Screw Driver set
-do-
48.
Spanner Set
-do-
49.
Crimping tool (RJ45)
-do-
50
Bench Vice 3”
-do-
51.
File 10” plare
Nelson Make
52.
Aluminum ladder folding 25’ ISI Make
53.
Aluminum ladder with tabletop 6’ height
ISI Make
54.
Hammer ball pin 0.75 kg.
ISI Make
PYE/ISI
Taparia/PYE
PYE/Taparia
Taparia Make
4
55.
Chisel cold flat 19mm
-do-
56.
Center Punch 10mm Dia x 100mm –do-
57.
Steel Rule 15cm English and Metric
Nelson Make
58
Screw Driver 30cmx9mm Blade
Make
59.
Spanner D.E set of 12 pieces (100mm32mm) PYE Make
60.
Plier Combination 15cm Taparia Make
61.
Hand file 20 cm second cut Nelson Make
62.
Feeler gauge 20 blades (Metric) ISI Make
63.
Ring Spanner set of 12 pieces (10mm32mm) Taparia Make
64.
Steel tool box with lock and key (folding
type) size 400x200x150mm ISI Make
65.
Allen Key set of 12 pieces (10mm-32mm)
Taparia
66.
Circlip plier (Ext.& Inf) 150mm and 200
(two each) Taparia Make
67.
Philips screw driver type set of 5 pieces
(100mm-300mm) ISI Make
68.
Rule steel 300mm ISI Makess
69.
Divider spring joint 150mm Taparia Make
70.
Prick punch 15 mm
71.
Chisel cross cut 200mmx6mm –do-
72.
Hammer ball pin 0.5 kg.
Taparia
-do-
–do-
5
73.
Hammer copper 1 kg with handle –do-
74.
Engineering square 15cm blade
-do-
75.
Scriber 15 cm
-do-
76.
Scriber clock universal
-do-
77.
Hacksaw frame for 30 cm blade
-do-
78.
‘V’ block 75x38mm pair with clamps PYE
Make
79.
Punch Hollow 6,7,8,9,10 5and 12mm set
ISI Make
80.
Punch figure set 3mm ISI Make
81.
Punch letter set 3mm ISI Make
82.
Hand vice 37mm
Taparia Make
83.
File flat 35cm bastard
Nelson
84.
Screw Driver electrician type 15cm size
PYE Make
85.
File flat 25cm second cut
Nelson Make
86.
File flat 20cm smooth
-do-
87.
File flat sate edge 25cm smooth
-do-
88.
File triangular 15 cm second cut
-do-
89.
File half round 20cm second cut
-do-
90.
File square 300cm rough
-do-
91.
File square 20cm second cut
-do-
92
Twist drill metric 3mm to 12mm (1mm
step) Nelson make
6
93.
Taps and dies complete set ion box B.A
BSW, BSF, American and metric with
handles PYE make
94.
Hand reamer, adjustable 10.5mm to
11.25mm , 11.25mm to 12.75mm,
12.75mm to 14.25mm & 14.25mm to
125.75mm PYe make
95.
Scraper flat 25mm
Nelson make
96.
Scraper triangular 25mm
-do-
97.
Scraper half round 25mm
-do-
98.
Sets of Morse socket MT 0-1, 1-2 and 2-3
Nelson
99.
Micrometer outside 25-50mm
make
Nelson
100.
Micrometer outside0-25mm
-do-
101.
Micrometer outside 50-75mm
-do-
102.
Micrometer outside75-100
-do-
103.
Micrometer inside 50 to 75mm and
150mm and 25mm-50mm Nelson Make
104.
Vernier caliper set 250 or 200 mm
inside,outside and depth safety goggle
Nelson Make
105.
Hammer, Planishing
-do-
106.
Setting Hammer
PYE make
107.
Mallet(Wooden)
ISI Make
108.
Trammel 30 cm
-do-
109.
Blow Lamp 0.5ltr
-do7
110.
Plier Nose(round and Straight)150mm
and 200mm Taparia make
111.
Snip Straight 250mm
112.
Spanner double ended set of 12 metric
size 6-32 mm Taparia make
113.
Spanner off set double ended set of 7
PCs(6mm-17mm) Taparia make
114.
Double open ended ignition spanner set
of 5(0 to 9 mm) Taparia make
115.
Spanner adjustable 20 cm
Taparia make
116.
Spanner ring off set of 6(SAE)
117.
Spanner for sparking plug 14mm
118.
Magneto Spanner set of 8 spanners -do-
119.
Spanner socket set 6-32 mm socket
complete set Taparia make
120.
Spanner T flex for screwing up and
unscrewing in in accessible position
Taparia make
121.
Double open ended tappet spanner
Taparia make
122.
Drift copper 10 mm diax150mm Nelson
make
123.
Spray gun- Kerosene
124.
Pressure Grease gun
Make
125.
Chain Pully block 3 ton capacity
Nelson Make
Taparia make
-do-do-
ISI Make
ISI
8
126.
Tray Cleaning 45x30 cm
Make
ISI
127.
Oil can 0.5 ltr.
–do-
128.
Lifter, valve spring
-do-
129.
Tools, valve grinding suction type
(consumable tool) ISI Make
130.
Vacumm gauge 0.75cm ISI Make
131.
Stone, carborandum 15x53.75cm rough
and smoothe4 ISI Make
132.
Cylinder dial guage
133.
Jack, Hydraulic Hi-lift type (Trolly type) ISI
Make
134.
Wheel Alignment gauge-magnetic type
with turn tables ISI Make
135.
Puller set steering wheel universal
Make
136.
Puller set universal bearing and bushes do-
137.
Lifting jack, screw type
-do-
138.
Hot patch clamp
-do-
139.
Spring plier 150,200mm
do-
140.
Tyre changer
-do-
ISI Make
ISI
-
Sd/Member Secretary,
IMC ITI Udhampur.
9
Annexure-B to tender Notice No.ITI/U/IMC/304-07 dated 23/6/2010
S.No. Name of item with specification
1
Digital DC power supply 0-30 volt, 5Amp
BOSCH Make
2
L.C.R. Digital Meter BOSCH Make
3
Fan Winding Machine
ISI Make
4
AC drive 3HP 3 Phase
-do-
5
Contactor 32 Amp L&T make
6
Over load relay 32 Amp L&T Make
7
Push Button with box ISI Make
8
Microwave oven LG
9
Portable drill machine 12 mm and 6mm
each Wolf make
10
150 AH 12 Volt Battery Exide make
11
Techo meter Mars make
12
Earth resistance tester Mars make
13
Oil testing kit ISI Make
14
Soldering Iron 25 Watt. ISI Make
15
De soldering pump
16
Neon tester PYE make
17
Digital DC Power supply 0-30V 2 Amp
BOSCH make
Rate
-do-
10
18
Frequency Meter Digital ISI Make
19
Volt Meter Digital
20
Multi meter Analog
Sanwa make
21
Multi meter digital
-do-
22
Lead Acid battery 12V 60 Ah Excide
make
23
Capacitance meter digital BOSCH
makes
24
DC servo motor ISI Make
25
Techo Generator -do-
26
Invertor 1000 Watt Luminous pure Sine
Wave
27
Inverter 500 Watt -do-
28
Function generator ISI Make
29
AM/FM signal generator ISI Make
30
RF Signal generator
31
TVRO terminal with LNB and Receiver
LG Make
32
Cable TV Line Amplifier LG Make
33
Digital IC Trainer Kit
34
Microprocessor Trainer Kit 8085 Bosch
make
35
Terminal Adopter ISI Make
36
Cable MODEM
37
Different Extension cards ISI Make
-do-
-do-
Bosch make
-do-
11
38
Soldering iron 120 watts -do-
39
Soldering iron copper 225 gms(fire
heated) 150mm and 200mm ISI Make
40
Drilling machine (bench) 12mm dia Wolf
make
41
Testing sparking plug NEON type ISI
Make
42
Compressor air piston type (Vehicular )
ISI Make
43
High rate discharge tester
44
AVO meter
45
Growler Internal And External Each ISI
Make
46
Battery charger
47
Timing light ISI Make
48
Hydrometer -do-
49
Continuity meter ISI Make
50
Washing Machine (Semi-automatic 6.5
Kg) LG Make
ISI Make
Sanwa make
Mico make
Sd/Member Secretary
IMC,ITI Udhampur
12