LED Indications - Display Driver
Startup
Bootloader
Profile Assigned
Profile Assigned
Solid
Error
square and dotted magnetic
sensor activated together
Factory
default
Self test fail
In the mesh
10
5
Factory Default
1
1
Pending Magnetic Sensor
activations
14
Profile
removed
Device generic
trouble (Eg: Dual
address,Partial link
condition)
Timeout
with SWIFT
Tools
10
Waiting for
profile
square
magnetic
sensor
activated
Timeout
1M
Solid
10
Device dropped out
90
Profile
received
3
Searching for
mesh (in
rescue mode)
with or
without
SWIFT
Tools
Timeout
0.5
Solid
Searching
for profile
25
8
Slot request
rejected,
searching for
mesh (in
formation
mode)
Slot not
assigned
14
7
Rescue
mode
Normal
mode
Slot
assigned
Solid
6
Discovered
Mesh
Timeout
3M
Timeout
Slot not
assigned
6
Slot
assigned
Searching for
mesh (in
formation mode)
20 M
Discovered
Mesh
5M
7
Mesh
forming
7
1st Mesh
restructuring
Mesh forming:
Device is in the mesh and searching for other devices.
Any device in the mesh can transition to ‘mesh forming’mode.
Bootloader
Legend
Example:
No. of blinks
Two blinks in this pattern
LED color
Interval between blink patterns
Bootloader
Normal
PN LS10123-000GE-E:A 8/26/2014 14-680
Bootloader
Firmware
Update
Duration of LED state
Approximate duration
1st blink is green. 2nd is yellow
20 M
7
7 sec between blink patterns
Will transition to next state after
20 minutes (approx.)
All units are in seconds. Minute is indicated by M.
2
Fold on dotted line.
Fold on dotted line.
Fold on dotted line.
LED Table - Display Driver
In The Mesh
LED Pattern
Solid
5
1
Solid
Self test fail
Profile
removed
Condition
Action Required
Device has failed internal self
diagnostics
Restart the device. If problem persists.
Contact customer support
LED Pattern
Device generic
trouble (Eg:Dual
14
Device has returned to factory
default state
3M
Profile
received
7
Condition
Action Required
Device is in the mesh and in trouble
condition.
Refer to the panel to identify
the trouble and possible
resolution
address, Partial
link condition)
Rescue
mode
Device is functioning as normal and
searching for lost devices
Normal
mode
Device is functioning as normal
Mesh
Forming
Device is in the mesh and looking for
devices that are not in the mesh
1st Mesh
restructuring
Mesh is formed and initializing
Device is now profile assigned.
10
14
Factory Default
LED Pattern
10
Waiting for
profile
Condition
Action Required
20 M
Device is factory default
5M
1M
0.5
Searching
for profile
7
Device is factory default and
requesting a profile from a
distributor or gateway
7
Use SWIFT Tools to assign profile or
activate switch to search for profile
Bootloader
Profile Assigned
LED Pattern
8
90
3
25
LED Pattern
Condition
Action Required
Slot
request
rejected
Device not permitted into the
mesh
Confirm device count and software
version
Searching for
mesh (in
rescue mode)
Profile is assigned
Searching for
mesh (in
formation
mode)
Profile is assigned and device
is searching for the mesh
Ensure the mesh is in rescue mode
or wait for timeout to search mesh
in formation mode
Condition
Action Required
Bootloader
Normal
Device is ready to update
Use SWIFT Tools to initiate
the download
Bootloader
Firmware
Update
New application code is being downloaded
Legend
Example:
No. of blinks
Two blinks in this pattern
LED color
Interval between blink patterns
10
1
Pending
Magnetic
Sensor
activations
Ensure the mesh is in formation mode
Duration of LED state
Approximate duration
All units are in seconds. Minute is indicated by M.
1st blink is green. 2nd is yellow
20 M
7
7 sec between blink patterns
Will transition to next state after
20 minutes (approx.)