DIAPHRAGM SEAL FLANGED "I" SECTION TYPE Model - CSI Special Features : • • • • • Continuous duty I section extension to facilitate smaller flanged connection Ideal for general purpose application Suitable for anti corrosive protection Available with Flushing Ring (Optional) Applications : Diaphragm seals are provided in the instruments like pressure gauges, switches, transmitters in order to isolate the sensing element from the main service due to its corrosive, viscous and sedimented nature and to avoid clogging and solidification. This can be widely used with anti corrosive treatment / protection & various flanged sizes. Specifications STANDARD VERSION Range : -1 bar to 70 bar Process temperature : -20°C to 200°C for PTFE lined : -40°C to 200°C for without PTFE lined Instrument Connection : 1/2" G / BSP (F) Process Connection : Flange (as per DIN/BS/ANSI/JIS) Filling Fluid : Silicon Oil - DC 200 up to -40 to 200°C Diaphragm : AISI 316L SS Top Chamber : AISI 304 SS I Section (Bottom Chamber) : AISI 316 SS Flange (as per DIN/BS/ANSI/JIS) Nuts / Bolts : AISI 304 SS Gasket : PTFE (up to 200°C) / Metal Seal (up to 350°C) Slip Ring (Tension Flange) : AISI 304 SS DRAWING OF "I" SECTION H A G DIAPHRAGM C B INSTRUMENT CONNECTION Flange As per Standard Ranges A B C H G -1 to 0 bar & 0 to 70 bar 32 28 50 98 1/2" G (F) E :- As per Standard Flange size. SELECTION OF MODEL (1) MODEL CODE OF MODEL SELECTION CSK CSK S6L (2) MODEL DIAPHRAGM (1) CODE SELECTION OF MODEL HASTELLOY 'C' HT TITANIUM TI TA MONEL MN PE HT AISI 316L SS TITANIUM S6L TI TANTALUM TA MONEL MN AISI 316L SS S6L AISI 304 SS S4 MONEL MN TANTALUM DIAPHRAGM (2) PTFE (1) MODEL CODE HASTELLOY 'C' (3) (2) BOTTOM DIAPHRAGM PTFECHAMBER (FLANGE) PE 316 SS (Standard) S6 (3)AISI BOTTOM CHAMBER (FLANGE) AISI SS AISI 316L 304 SS 'C' AISIHASTELLOY 316 SS (Standard) S6L S4 AISI 316L SS S6L HT S6 (3) PROCESS BOTTOM CHAMBER (I SECTION) (4) CONNECTION HASTELLOY 'C' HT CARBON STEEL CS TANTALUM MONEL TITANIUM CARBON STEEL TA MN TANTALUM TA CSI S6L S6 S6 TI CS (* Refer Pressure v/s Temperature table below.) (* Refer Pressure v/s Temperature table below.) TI TITANIUM XX S6 AISI 304 SS S4 HT # PLEASE INDICATE YOUR REQUIRED SIZE HASTELLOY 'C' (* Refer Pressure v/s Temperature AISI 316 SS (Standard) S6 PVC* PC table below.) (4) PROCESS CONNECTION AISI 316L SS ON WETTED S6LPARTS PVDF* PD (5)PLEASE PROTECTION # INDICATE YOUR REQUIRED SIZE XX LB (4) PROCESS CONNECTION PTFE PROTECTION FOR (Max up to 150°C) (5) PROTECTION ONDIAPHRAGM WETTED PARTS #PTFE PLEASE INDICATE YOUR REQUIRED SIZE COATING ON DIAPHRAGM (Max up to 315° C) LB # PTFE LINING ON BOTTOM CHAMBER - 2mm THICK (Max up to 150°C) LB PF PTFE LINING ON BOTTOM CHAMBER - 2mm THICK (Max up to 150°C) CD LB PTFE PROTECTION FOR DIAPHRAGM (Max up to 150°C) PF (5) PROTECTION ON WETTED PARTS (6) FILLING FLUIDS PTFE COATING ON DIAPHRAGM (Max up to 315°C) CD PTFE LINING ON BOTTOM CHAMBER - 2mm THICK (Max up to 150°C) FLUROLUBE 4.2 (-45 TO 175 °C) O1 PTFE PROTECTION FOR DIAPHRAGM (Max up to 150°C) FLUROLUBE (-40 TO 235 °C) O2 (6) FILLING 6.3 FLUIDS FLUROLUBE FS (-28 TO 148 °C) LB PF O3 O1 FLUROLUBE (-45 TO 175 °C) (6) FILLING4.2 FLUIDS FOOD GRADE OIL (-20 140 °C) O4 FLUROLUBE 6.3 (-40 TOTO 235 °C) O2 FLUROLUBE 4.2 (-45 TO 175 °C) SILICON DC 200 (-40TO TO148 205°° FLUROLUBE FS (-28 C)C) O3 O5 (Standard)FLUROLUBE 6.3 (-40 TO 235 °C) FOOD GRADE OIL (-20 TO 140 TO °C)148 °C) O4 FLUROLUBE FS (-28 SILICON DC 200 TO 205 SILICON DC 200 (-40 (-40 TO 205 °C) °C) (Standard) O5 (Standard) HALOCARBON OIL capillary of (7) REMOTE MOUNTING (With O5 04 O1 O2 O3 O4 Max. Up O5to 6 Mtrs.) XX SPECIFY IN METERS (e.g. 1.5 = 1.5 METERS 2.0 = 2 METERS) (7) REMOTE MOUNTING (With capillary of Max. Up to 6 Mtrs.) (8) CAPILLARY SPECIFY IN METERS (e.g. 1.5 = 1.5 METERS 2.0 = 2 METERS) AISI 304 SS S4 XX AISI 316 SS S4 S6 (8) CAPILLARY (9) CAPILLARY if selected) AISI 304 SSCOVERED WITH S4 ARMOUR (Applicable AISI 316 SSwith S4 or S6S6 S4 AISI 304 SS AISI 316 SS (9) CAPILLARY S6 (Applicable with S4 or S6 if selected) COVERED WITH ARMOUR PVC 304 (Ambient Temp. Max. 60°C) AISI SS PC S4 AISI 316 SS LB O5 S4 S4 S4 S6 (10) PVCOTHER (AmbientOPTIONS Temp. Max. 60°C) PC HELIUM LEAK TEST MATERIAL TEST CERTIFICATES HELIUM LEAK TEST DRY SEAL ONLY WITHOUT INSTRUMENT DRY SEAL ONLY WITHOUT INSTRUMENT Example MATERIAL 1 TEST CERTIFICATES 2 MATERIAL TEST CERTIFICATES XX HT HELIUM LEAK TEST DRYOTHER SEAL ONLY WITHOUT INSTRUMENT (10) OPTIONS OPTIONS SD HT MC HT SD SD MC 4 MC 3 SD XX 5 Order Detail Example CSK 1 S4 2 S6L 3 S6 4 XX 5 Order 6 Detail CSK 7 S4 8 S6L 9 S6 10 XX 11 LB 6 O5 7 XX 8 S4 9 S4 10 Option XX 11 LB O5 XX S4 S4 Option XX Example 1 2 3 4 5 6 Order Detail CSI S6 # LB O4 Option xx PRESSURE V/s TEMPERATURE MOC OF BOTTOM CHAMBER 20°C 40°C 60°C 80°C 100°C 120°C PVDF 10 bar 10 bar 10 bar 7 bar 4 bar 2 bar PP 10 bar 10 bar 6 bar 4 bar 1 bar N/A PVC 10 bar 10 bar 4 bar 1 bar N/A N/A PRESSURE V/s TEMPERATURE ■ NESSTECH INSTRUMENTS PVT. LTD (INDIA) Survey No. 26/2,“G”Type, Global Industrial Park, Near Nahuli Railwaycrossing, Village Valvada, Vapi, Tal Umbergaon, Dist Valsad-396191, Gujrat TEL: + 91-260 -299 -6920 ■ NESS TECHNOLOGY (M) SDN BHD (MALAYSIA) No. 42A Jalan PUJ 3/8, Taman Puncak Jalil, Bandar Putra Permai, 43300 Seri Kembangan, Selangor TEL: + 603 -8940-1134 /8940-1059 FAX: + 603 -8999 -4133