S-VENT ® SV49-_ _-AF ® ® SPECIFY TYPE MAXIMUM SECURITY GRILLE A MESTEK COMPANY SUBMITTAL SHEET P.O. BOX 4938 • 1220 WATSONCENTER ROAD • CARSON, CA 90745-4206 (310) 835-7500 • FAX (310) 835-0448 e-mail: airsec@anemostat.com • website: www.anemostat.com FRONT SECTION TOP SECTION 1/2" HORIZONTAL OPENING with ANGLE FRAME SIDE SECTION Wall Depth Rough Opening Width plus 1.3" REAR OPERATED OBD (OPTIONAL) Rough Opening Height Rough Opening Height plus 2.3" Grille Neck O.D. 1" X 1" X 3/16" ANGLE FRAME (SHIPPED LOOSE) Rough Opening Width 16 GA Louver Housing IMPORTANT: It is the specifier’s responsibility to properly configure the HVAC system to meet the appropriate level of comfort, safety, security and detention PRODUCT FEATURES Face Flange 16 GA (standard) Material Type Cold Rolled Steel (standard) MUST SPECIFY TYPE (BASED ON ROUGH OPENING SIZE) AS PART OF MODEL NUMBER WHEN PLACING ORDER H E I G H T 6 8 10 12 14 16 18 20 22 7 A1 A2 A3 A4 A5 A6 A7 A8 A9 9 B1 B2 B3 B4 B5 B6 B7 B8 B9 11 C1 C2 C3 C4 C5 C6 C7 C8 C9 WIDTH 13 15 E1 D1 E2 D2 E3 D3 E4 D4 E5 D5 E6 D6 E7 D7 E8 D8 E9 D9 17 F1 F2 F3 F4 F5 F6 F7 F8 F9 19 G1 G2 G3 G4 G5 G6 G7 G8 G9 21 H1 H2 H3 H4 H5 H6 H7 H8 H9 Anchoring Studs (optional) Nelson Type - specify stud size_____ (with sleeve only) QTY TYPE ROUGH OPENING WALL DEPTH W" X H" C4 M 11 P L 12 E 6" S A ROUGH OPENING SIZES (WIDTH X HEIGHT) Dimensions in Inches Angle Frame 1" x 1" x 3/16" (optional) 1" x 1" x 1/4" (optional) 1" x 1" x 1/8" (optional) Opposed Blade Damper (optional) (shipped loose) Rear Operated (with sleeve only) Horizontal Louvers with Housing 16 GA with 3 1/4" Neck Depth (std) Finish Beige Powder Coat-5 to 7 mil (std) White Powder Coat-5 to 7 mil (opt) Other Powder Coat Colors ________ Sleeve (standard) 12 GA - specify length__________ 27 23 J1 J2 J3 J4 J5 J6 J7 J8 J9 SPECIFY TYPE SUBMITTAL APPROVAL Job Name and Location Engineer Mfr. Rep. Date Date Factory Submitted By Date Date AUGUST 2008 NEW CONSTRUCTION S-VENT SECURITY PRODUCTS PAGE 11 United States Patents issued for S-Vent® 5,375,373 and 6,113,488 S-Vent® is a registered trademark of Safety Concepts, Inc., licensed to Anemostat Products, a Mestek Company