LED Dimming Driver Hi-lumeT A-Series LTE Architectural Dimming 369543i 1 09.22.15 Hi-lumeT A-Series Driver Overview Forward-Phase Control Hi-lumeT A-Series Driver is a high-performance LED driver that provides smooth, continuous 1% dimming for virtually any LED fixture, whether it requires constant-current or constant-voltage. It is the most versatile LED driver offered today due to its compatibility with a wide variety of LED arrays, multiple form factors, and numerous control options. Features •Continuous, flicker-free dimming from 100% to 1%. •Guaranteed compatibility with selected Maestro Wireless®, RadioRA® 2, HomeWorks® QS, GRAFIK Eye® QS, GRAFIK Systems™, Quantum®, and C•L® dimmers. Please see Compatible Controls chart or contact Lutron for details regarding compatible controls. •QwikFigTM compatible. For more information please refer to Lutron® P/N 041473 (K and M case only). Hi-lumeT A-Series, case type K 3.00 in (76 mm) W x 1.00 in (25 mm) H x 4.90 in (124 mm) L •100% performance tested at factory. •A rated lifetime of 50,000 hours @ t c =149 °F (65 °C). Hi-lumeT A-Series, case type M •UL® recognized and listed options for United States and Canada. 1.18 in (30 mm) W x 1.00 in (25 mm) H x 14.25 in (362 mm) L •Type TL Rated. •FCC Part 15 compliant for commercial and residential (UL® Listed only) applications at 120 V ~. •Pulse width modulation (PWM) or constant-current reduction (CCR) dimming methods available. See Application Note #360 for details. •RoHS Compliant •For more information please go to: www.lutron.com/HilumeLED Hi-lumeT A-Series, case type KL ® Job Name: Job Number: S P E C I F I C AT I O N S U B M I T TA L Model Numbers: K-case mounted on a 4.00 in (102 mm) W x 1.50 in (38 mm) H x 4.00 in (102 mm) L junction box to provide UL® listed wiring compartment Page 1 LED Dimming Driver Hi-lumeT A-Series LTE Architectural Dimming 369543i 2 09.22.15 Specifications Regulatory Approvals Performance •Meets ANSI C62.41 category A surge protection standards up to and including 4 kV. •Dimming Range: 100% to 1%. •FCC Part 15 compliant for commercial and residential (UL® Listed only) applications. •Requires Forward Phase Control; please see Compatible Controls chart. •Manufacturing facilities employ ESD reduction practices that comply with the requirements of ANSI/ESD S20.20. •A rated lifetime of 50,000 hours @ t c = 149 °F (65 °C). –For rated warranty, tc not to exceed the maximum rated temperatures. 1 •Lutron® Quality Systems registered to ISO •Patented thermal foldback protection. 9001.2008. •UL® 8750 recognized. •UL® 8750 listed form factor available. •Class 2 output available. •Models available to meet LED Driver requirements for Energy Star 1.1. •Type TL Rated. UL® 8750 Listed Option •cULus® for United States and Canada available for certain operating regions. •Pre-wired and installation ready. •See KL Case: Case Dimensions page for more specific details regarding UL® listed option. •Operating Voltage: 120 V ~ at 50/60 Hz •LEDs turn on to any dimmed level without going to full brightness. •Non-volatile memory restores all driver settings after power failure. •Power Factor: > 0.90 at 40 W. •Total Harmonic Distortion (THD): < 20% at 40 W. •Inrush Current: < 2 A. •Inrush Current Limiting Circuitry: eliminates circuit breaker tripping, switch arcing and relay failure. •Open circuit protected. •Short circuit protected. •Turn-on time: ≤ 1.5 seconds. 2 •PWM Dimming Frequency: 550 Hz. Driver Wiring & Mounting Environmental •Sound Rating: Inaudible in 27 dB ambient. •Relative Humidity: Maximum 90% non-condensing. •Minimum operating ambient temperature (t a) = 32 °F (0 °C). •Driver is grounded by a mounting screw to the grounded fixture (or by terminal connection on the K case). •Terminal blocks on the driver accept one solid wire per terminal from 18 AWG to 16 AWG (0.75 mm( to 1.5 mm(). •Fixture must be grounded in accordance with local and national electrical codes. •For maximum driver-to-LED light engine wire length, see charts in Driver Leads section at the end of the document. 1 2 Installer is responsible for ensuring that the driver case temperature does not exceed the maximum rated temperature. Models available with turn-on time ≤ 1 second. ® Job Name: Job Number: S P E C I F I C AT I O N S U B M I T TA L Model Numbers: Page 2 LED Dimming Driver Hi-lumeT A-Series LTE Architectural Dimming 369543i 3 09.22.15 How to Build a Model Number: Hi-lumeT A-Series LTE LTE A 4U1U _ _ - _ _ _ _ _ Example: LTEA4U1UKS-HC070 For further assistance selecting your model number, contact our LED Center of Excellence at 1.877.346.5338 or LEDs@lutron.com Case Size: K = Compact M = Stick Current Level (for Constant-Current): 020 = 0.20 A; 021 = 0.21 A…070 = 0.70 A…210 = 2.10 A Voltage Level (for Constant-Voltage): 100 = 10.0 V; 105 = 10.5 V…600 = 60.0 V Case Style: S=Studded (K case only) N=Non-Studded L =UL® Listed (K case only) Driver Output: C = Constant-current driver with pulse width modulation (PWM) dimming A = Constant-current driver with constant-current reduction (CCR) dimming V = Constant-voltage driver with pulse width modulation (PWM) dimming LED Load Output Range (see the following pages for more detail): Class 2 Constant-Voltage Class 2 Constant-Current A = 10.0 V–12.0 V E = 0.20 A–0.50 A 30 V–54 V Isolated Non-Class 2 Constant-Current B = 12.5 V–20.0 V * F = 0.51 A–1.00 A 30 V–54 V * Y = 0.20 A–0.50 A 30 V–60 V C = 20.5 V–24.0 V * G = 0.20 A–0.70 A 8 V–20 V Z = 0.51 A–1.00 A 30 V–60 V * D = 24.5 V–38.0 V * H = 0.20 A–0.70 A 15 V–38 V I = 0.71 A–1.05 A 8 V–20 V Isolated Non-Class 2 Constant-Voltage J = 0.71 A–1.05 A 15 V–38 V X = 38.5 V–60.0 V * L = 1.06 A–1.50 A 15 V–38 V * K = 1.06 A–1.50 A 8 V–20 V * Output parameter is power-limited for these output ranges. Consult detailed specifications on the following pages for each range. M = 1.51 A–2.10 A 8 V – 19.9 V * ® Job Name: Job Number: S P E C I F I C AT I O N S U B M I T TA L Model Numbers: Page 3 LED Dimming Driver Hi-lumeT A-Series LTE Architectural Dimming 369543i 4 09.22.15 How to Build a Bulk Model Number (For use with Lutron® QwikFigTM technology): Hi-lumeT A-Series LTE LTE A 4U1U _ _ - _ _ B LK Bulk Models: Coverage based on “LED Load Output Range” from standard non-configurable models shown in the How to Build a Model Number section. Example Standard Model Number: LTEA4U1UKS-HC070 has LED load output range = H Case Size: K=Compact M=Stick K-case and M-case Case Style: 1 S = Studded (K-case only) N = Non-Studded (All M-case models) 1A =Covers “LED Load Output Range” Y and Z 2A =Covers “LED Load Output Range” M 3A =Covers “LED Load Output Range” E and F (CCR dimming only) K-case only 2G=Covers “LED Load Output Range” G 2H =Covers “LED Load Output Range” H 2R =Covers “LED Load Output Range” I and K 2S =Covers “LED Load Output Range” J and L M-case only 2B =Covers “LED Load Output Range” H, J, and L 2C =Covers “LED Load Output Range” G, I, and K Note: Only the model numbers falling into the structure listed above can be configured with QwikFigTM. Standard model numbers configured at Lutron will not be capable of being reconfigured at another facility. 1 QwikFigTM bulk drivers are only available as UL® recognized. ® Job Name: Job Number: S P E C I F I C AT I O N S U B M I T TA L Model Numbers: Page 4 LED Dimming Driver Hi-lumeT A-Series LTE Architectural Dimming 369543i 5 09.22.15 “A” Output Range, Voltage Driver Models Driver Type Output Dimming Method Output Voltage Output Current Output Power Constant-Voltage Driver (Class 2) Pulse Width Modulation (PWM) 10.0–12.0 V PWM 0.42–3.3 A 5–40 W Standards Recognition UL® Listed Option (KL case) Yes Voltage Driver Operation Range: Output Current vs. Output Voltage Output Current vs. vs. Output Voltage Output Current Output Voltage 3.5 Output Power vs. Output Voltage Output Power vs.vs. Output Voltage Output Power Output Voltage 3.5 3.5 3.3 3.3 3.3 45 40 40 40 3 35 35 35 2.5 2.5 2.5 2 2.02 Output OutputPower Power(W) (W) Output Power (W) Output (A) Output OutputCurrent Current Current(A) (A) 3.03 A A 1.5 1.5 1.5 1 1.01 30 30 30 25 25 25 A A 20 20 20 15 15 15 10 10 10 0.5 0.5 0.5 0 00 3.3 A Max. 5 55 5 W Min. 10 12 0 0 0 12 10 12 10 20 20 20 30 40 30 30 50 40 40 60 50 50 60 60 Output Voltage Output Voltage(V) (V) 0 00 0 0 0 10 12 1010 12 12 20 30 20 20 40 30 30 50 40 40 60 50 50 60 60 Output Voltage Output Voltage(V) (V) Output Voltage (V) Output Voltage (V) Typical Performance Specifications: Parameter Value Test Conditions Input Current 410 mA Power Factor 0.98 THD 16% Driver Efficiency 79% t a = 25 °C, 12.0 V 40 W load, Maximum Light Output, K case 120 V~ without a dimmer 90 90 85 85 85 80 80 80 10.0 V 75 12.0 V 70 65 60 Efficiency Efficiency(%) (%) Efficiency (%) Driver Efficiency vs. Output Power at 120 V~ 90 Driver Efficiency vs. Output Power at 277 V~ Driver Efficiency vs. Output Power at 277 V~ 75 75 70 70 65 65 5 10 15 20 25 30 35 40 Output Power (W) ® Job Name: Job Number: S P E C I F I C AT I O N S U B M I T TA L Model Numbers: 60 60 5 5 10 10 15 15 20 20 25 25 30 30 35 35 40 40 Output Power (W) Output Power (W) Page 5 LED Dimming Driver Hi-lumeT A-Series LTE Architectural Dimming 369543i 6 09.22.15 “B” Output Range, Voltage Driver Models Driver Type Output Dimming Method Output Voltage Output Current Output Power Constant-Voltage Driver (Class 2) Pulse Width Modulation (PWM) 12.5–20.0 V PWM 0.25–3.2 A 5–40 W Standards Recognition UL® Listed Option (KL case) Yes Voltage Driver Operation Range: Output Current vs. Output Voltage Output Current vs. Output Voltage Output Current vs. Output Voltage 3.5 Output Power vs. Output Voltage Output Power vs.vs. Output Voltage Output Power Output Voltage 3.5 3.5 45 3 40 40 40 3.03 Output OutputPower Power(W) (W) Output Power (W) Output (A) Output OutputCurrent Current Current(A) (A) 35 35 35 40 W Max. 2.5 2.5 2.5 2 2.02 1.5 1.5 1.5 B B 1 1.01 25 25 25 B B 20 20 20 15 15 15 10 10 10 0.5 0.5 0.5 0 00 30 30 30 5 55 5 W Min. 10 12.5 0 0 0 12.5 10 12.5 10 20 20 20 30 40 30 30 50 40 40 60 50 50 60 60 Output Voltage Output Voltage(V) (V) 0 00 0 0 0 10 12.5 1010 12.5 12.5 20 30 20 20 40 30 30 50 40 40 60 50 50 60 60 Output Voltage Output Voltage(V) (V) Output Voltage (V) Output Voltage (V) Typical Performance Specifications: Parameter Value Test Conditions Input Current 400 mA Power Factor 0.99 THD 9% Driver Efficiency 83% t a = 25 °C, 20.0 V 40 W load, Max. Light Output, K case 120 V~ without a dimmer Driver Efficiency vs. Output Power at 120 V~ 90 18.0 V 80 12.5 V 75 70 65 60 85 85 20.0 V 80 80 Efficiency Efficiency(%) (%) Efficiency (%) 85 Driver Efficiency vs. Output Power at 277 V~ Driver Efficiency vs. Output Power at 277 V~ 90 90 75 75 70 70 65 65 5 10 15 20 25 30 35 40 Output Power (W) ® Job Name: Job Number: S P E C I F I C AT I O N S U B M I T TA L Model Numbers: 60 60 5 5 10 10 15 15 20 20 25 25 30 30 35 35 40 40 Output Power (W) Output Power (W) Page 6 LED Dimming Driver Hi-lumeT A-Series LTE Architectural Dimming 369543i 7 09.22.15 “C” Output Range, Voltage Driver Models Driver Type Output Dimming Method Output Voltage Output Current Output Power Constant-Voltage Driver (Class 2) Pulse Width Modulation (PWM) 20.5–24.0 V PWM 0.21–1.95 A 5–40 W Standards Recognition UL® Listed Option (KL case) Yes Voltage Driver Operation Range: Output Current vs. Output Voltage Output Current vs. Output Voltage Output Current vs. Output Voltage 3.5 Output Power vs. Output Voltage Output Power vs.vs. Output Voltage Output Power Output Voltage 3.5 3.5 45 3 40 40 40 3.03 35 35 35 Output OutputPower Power(W) (W) Output Power (W) Output (A) Output OutputCurrent Current Current(A) (A) 2.5 2.5 2.5 40 W Max. 2 2.02 1.5 1.5 1.5 C C 1 1.01 25 25 25 C C 20 20 20 15 15 15 10 10 10 0.5 0.5 0.5 0 00 30 30 30 5 55 5 W Min. 0 0 0 20.5 24 10 10 10 20.5 24 20.5 24 30 40 30 30 50 40 40 60 50 50 60 60 Output Voltage Output Voltage(V) (V) 0 00 0 0 0 10 10 10 20.5 24 30 20.5 24 20.5 24 40 30 30 50 40 40 60 50 50 60 60 Output Voltage (V) Output Voltage (V) Output Voltage (V) Output Voltage (V) Typical Performance Specifications: Parameter Value Test Conditions Input Current 370 mA Power Factor 0.99 THD 10% Driver Efficiency 84% t a = 25 °C, 24.0 V 40 W load, Maximum Light Output, K case 120 V~ without a dimmer Driver Efficiency vs. Output Power at 120 V~ 90 85 85 85 80 80 80 20.5 V Efficiency Efficiency(%) (%) Efficiency (%) 24.0 V 75 70 65 60 Driver Efficiency vs. Output Power at 277 V~ Driver Efficiency vs. Output Power at 277 V~ 90 90 75 75 70 70 65 65 5 10 15 20 25 30 35 40 Output Power (W) ® Job Name: Job Number: S P E C I F I C AT I O N S U B M I T TA L Model Numbers: 60 60 5 5 10 10 15 15 20 20 25 25 30 30 35 35 40 40 Output Power (W) Output Power (W) Page 7 LED Dimming Driver Hi-lumeT A-Series LTE Architectural Dimming 369543i 8 09.22.15 “D” Output Range, Voltage Driver Models Driver Type Output Dimming Method Output Voltage Output Current Output Power Constant-Voltage Driver (Class 2) Pulse Width Modulation (PWM) 24.5–38.0 V PWM 0.13–1.63 A 5–40 W Standards Recognition UL® Listed Option (KL case) Yes Voltage Driver Operation Range: Output Current vs. Output Voltage Output Current vs. vs. Output Voltage Output Current Output Voltage 3.5 Output Power vs. Output Voltage Output Power vs.vs. Output Voltage Output Power Output Voltage 3.5 3.5 45 3 40 40 40 3.03 35 35 35 Output OutputPower Power(W) (W) Output Power (W) Output (A) Output OutputCurrent Current Current(A) (A) 2.5 2.5 2.5 2 2.02 40 W Max. 1.5 1.5 1.5 1 1.01 D D 0.5 0.5 0.5 0 00 30 30 30 25 25 25 D D 20 20 20 15 15 15 10 10 10 5 55 5 W Min. 0 0 0 10 20 10 10 24.5 30 24.5 30 20 24.5 30 20 38 40 50 38 40 3840 60 50 50 60 60 0 00 0 0 0 10 10 10 20 24.5 30 20 24.5 30 20 24.5 30 Output Voltage Output Voltage(V) (V) 38 40 50 3840 38 40 60 50 50 60 60 Output Voltage Output Voltage(V) (V) Output Voltage (V) Output Voltage (V) Typical Performance Specifications: Parameter Value Test Conditions Input Current 380 mA Power Factor 0.99 THD 7% Driver Efficiency 86% t a = 25 °C, 38.0 V 40 W load, Maximum Light Output, K case 120 V~ without a dimmer Driver Efficiency vs. Output Power at 120 V~ 90 Driver Efficiency vs. Output Power at 277 V~ Driver Efficiency vs. Output Power at 277 V~ 90 90 36.0 V 38.0 V 85 85 85 80 80 80 Efficiency Efficiency(%) (%) Efficiency (%) 24.5 V 75 70 65 60 75 75 70 70 65 65 5 10 15 20 25 30 35 40 Output Power (W) ® Job Name: Job Number: S P E C I F I C AT I O N S U B M I T TA L Model Numbers: 60 60 5 5 10 10 15 15 20 20 25 25 30 30 35 35 40 40 Output Power (W) Output Power (W) Page 8 LED Dimming Driver Hi-lumeT A-Series LTE Architectural Dimming 369543i 9 09.22.15 “E” Output Range, Current Driver Models Driver Type Output Dimming Method Constant-Current Driver Constant-Current Reduction (Class 2) (CCR) Output Voltage Output Current Output Power Standards Recognition UL® Listed Option (KL case) 30–54 V - 0.20–0.50 A 6–27 W Type TL 82 º / 74 ºC - K-case Yes Type TL 86 º / 72 ºC - M-case When using QwikFigTM technology, these models can be built from the following bulk units: K-case - LTEA4U1UKx-3ABLK *; M-case - LTEA4U1UMN-3ABLK Voltage * x = studded (S) or Output non-studded (N)vs. Output Current Output Power vs. Output Current Current Driver Operation Range: 60 50 30 E 60 60 40 54 54 50 50 30 E 40 40 20 30 30 10 20 20 0 10 10 0 0.20 0.35 0.50 0.7 1.05 1.4 00 40 40 25 35 35 20 30 30 54 V Max. 15 25 25 E 10 20 20 E 5 15 15 0 10 10 2.1 0 0.20 0.35 0.50 30 V Min. 55 Output Current (A) Output Power Output Current Output Power vs.vs. Output Current 35 45 Output Output (W) (W)Power (W) OutputPower Power Output Voltage Output Voltage Output (V) (V)Voltage (V) 40 Output Voltage Output Current Output Voltage vs. vs. Output Current 54 0.7 1.05 1.4 1.75 2.1 1.75 1.75 2.10 2.1 Output Current (A) 0 00 0.20 .35 0.50 0.50 0.70 0.20 00.35 0.7 1.05 1.05 1.40 1.4 1.75 2.10 2.1 Output Current (A) 0 0 0 0.20 0.70 0.20 0.350.50 0.35 0.50 0.7 1.05 1.05 1.40 1.4 Output Current (A) Output Current (A) Output Current (A) Typical Performance Specifications: Parameter Input Current Value 260 mA Power Factor 0.99 THD 10% Driver Efficiency 83% Test Conditions t a = 25 °C, 0.50 A 27 W load, Maximum Light Output, K case 120 V~ without a dimmer Driver Efficiency vs. Output Power at 120 V~ Driver Efficiency vs. Output Power at 277 V~ 90 90 85 85 0.50 A 80 Efficiency (%) Efficiency (%) Efficiency (%) 80 75 Driver Efficiency vs. Output Power at 277 V~ 90 0.35 A 0.20 A 70 65 85 75 80 70 75 65 70 60 6 9 12 15 18 21 24 27 Output Power (W) ® Job Name: Job Number: S P E C I F I C AT I O N S U B M I T TA L Model Numbers: 60 65 6 9 12 15 18 21 24 21 24 27 Output Power (W) 60 6 9 12 15 18 Output Power (W) Page 27 9 LED Dimming Driver Hi-lumeT A-Series LTE Architectural Dimming 369543i 10 09.22.15 “F” Output Range, Current Driver Models Driver Type Output Dimming Method Constant-Current Driver (Class 2) Constant-Current Reduction (CCR) Output Voltage Output Current Output Power Standards Recognition UL® Listed Option (KL case) 30–54 V - 0.51–1.00 A 15–40 W Type TL 82 º / 74 ºC - K-case Yes Type TL 86 º / 72 ºC - M-case When using QwikFigTM technology, these models can be built from the following bulk units: K-case - LTEA4U1UKx-3ABLK *; M-case - LTEA4U1UMN-3ABLK * x = studded (S) or Output non-studded (N)vs. Output Current Voltage Output Power vs. Output Current Current Driver Operation Range: 40 60 Output Voltage Output Current Output Voltage vs. vs. Output Current 54 F 40 54 54 5050 40 40 30 40 W Max. Output Power (W)(W) Output Power (W) Output Power 6060 Output Voltage (V) Output Output Voltage Voltage (V)(V) Output Power Output Current Output Power vs.vs. Output Current 35 45 50 F 30 4040 20 3030 10 2020 0.35 0.51 0.7 1.00 1.4 1.75 F 30 30 20 F 25 25 15 20 20 10 30 V Min. 15 15 5 10 10 0 0 1010 0 54 V Max. 35 35 25 2.1 55 0 0.35 0.51 0.7 1.00 Output Current (A) 00 0 0 0.35 0.51 0.7 0.35 0.51 0.70 1.00 1.00 1.4 1.40 1.4 1.75 2.1 Output Current (A) 1.75 1.75 00 2.1 2.10 0 0.35 0.51 0.7 00.35 0.51 0.70 Output Current (A) Output Current (A) 1.00 1.00 1.4 1.40 1.75 2.1 2.10 1.75 Output Current Output Current(A) (A) Typical Performance Specifications: Parameter Input Current Value 390 mA Power Factor 0.99 THD 7% Driver Efficiency 82% Test Conditions t a = 25 °C, 1.00 A 40 W load, Maximum Light Output, K case 120 V~ without a dimmer Driver Efficiency vs. Output Power at 277 V~ Driver Efficiency vs. Output Power at 120 V~ 90 90 85 0.70 A 1.00 A 80 85 0.51 A Efficiency (%) Efficiency (%) Efficiency (%) 80 Driver Efficiency vs. Output Power at 277 V~ 85 90 75 70 65 60 15 20 25 30 Output Power (W) 35 40 75 80 70 75 65 70 60 65 5 10 15 5 10 15 Job Name: Job Number: S P E C I F I C AT I O N S U B M I T TA L Model Numbers: 25 30 35 40 Output Power (W) 60 ® 20 20 25 Output Power (W) 30 35 40 Page 10 LED Dimming Driver Hi-lumeT A-Series LTE Architectural Dimming 369543i 11 09.22.15 “G” Output Range, Current Driver Models Driver Type Output Dimming Method Constant-Current Driver (Class 2) Output Voltage Pulse Width Modulation (PWM) 8–20 V PWM Constant-Current Reduction (CCR) 8–20 V - Output Current Output Power Standards Recognition UL® Listed Option (KL case) 0.20–0.70 A 2–14 W Type TL 86 º / 57 ºC - K-case Yes Type TL 90 º / 69 ºC - M-case When using QwikFigTM technology, these models can be built from the following bulk units: K-case - LTEA4U1UKx-2GBLK *; M-case - LTEA4U1UMN-2CBLK * x = studded (S) or Output non-studded (N)vs. Output Current Voltage Output Power vs. Output Current Current Driver Operation Range: 40 60 Output Voltage Output Current Output Voltage vs. vs. Output Current 30 40 40 40 Output Power Output (W) Power (W) Output Power (W) Output Voltage Output Voltage Output (V) (V) Voltage (V) 60 60 50 50 30 40 40 20 G 30 30 10 8 20 20 G 0 0.20 10 10 88 0.35 0.7 1.05 1.4 1.75 25 35 35 20 30 30 15 25 25 10 20 20 20 V Max. G 15 5 15 0 10 10 2.1 0 0.20 0.35 55 Output Current (A) G 0.7 1.05 0 0.20 0.20 00.35 .35 0.7 0.70 1.05 1.05 1.4 1.40 1.75 1.75 1.4 1.75 2.1 1.75 1.75 2.10 2.1 Output Current (A) 8 V Min. 0 00 Output Power Output Current Output Power vs.vs. Output Current 35 50 0 2.1 2.10 Output Current (A) 0 0 0.20 0.20 0.35 0.35 0.70 0.7 1.05 1.05 1.40 1.4 Output Current (A) Output Current (A) Output Current (A) Typical Performance Specifications: Parameter Input Current Value 140 mA Power Factor 0.99 THD 12% Driver Efficiency 76% Test Conditions t a = 25 °C, 0.70 A 14 W load, Maximum Light Output, K case 120 V~ without a dimmer Driver Efficiency vs. Output Power at 120 V~ Driver Efficiency vs. Output Power at 277 V~ 90 90 0.50 A 0.70 A 85 Driver Efficiency vs. Output Power at 277 V~ 85 0.35 A 80 75 80 Efficiency (%)Efficiency (%) Efficiency (%) 90 0.20 A 70 65 85 75 80 70 75 65 70 60 2 4 6 8 10 12 14 60 65 2 4 6 Output Power (W) 8 10 12 10 12 14 Output Power (W) 60 ® Job Name: Job Number: S P E C I F I C AT I O N S U B M I T TA L Model Numbers: 2 4 6 8 Output Power (W) Page 14 11 LED Dimming Driver Hi-lumeT A-Series LTE Architectural Dimming 369543i 12 09.22.15 “H” Output Range, Current Driver Models Driver Type Output Dimming Method Constant-Current Driver (Class 2) Output Voltage Pulse Width Modulation (PWM) 15–38 V PWM Constant-Current Reduction (CCR) 15–38 V - Output Current Output Power Standards Recognition UL® Listed Option (KL case) 0.20–0.70 A 3–26.6 W Type TL 84 º / 62 ºC - K-case Yes Type TL 86 º / 78 ºC - M-case When using QwikFigTM technology, these models can be built from the following bulk units: K-case - LTEA4U1UKx-2HBLK *; M-case - LTEA4U1UMN-2BBLK * x = studded (S) or Output non-studded (N)vs. Output Current Voltage Output Power vs. Output Current Current Driver Operation Range: 40 60 Output Voltage Output Current Output Voltage vs. vs. Output Current 30 40 40 40 38 Output Power Output (W) Power (W) Output Power (W) Output Voltage Output Voltage Output (V) (V) Voltage (V) 60 60 50 50 30 H 40 40 38 38 20 15 30 30 H 10 20 20 0 15 15 10 10 0 0.35 0.20 0.7 1.4 1.05 1.75 25 35 35 20 30 30 15 25 25 H 38 V Max. 10 20 20 15 5 15 H 0 10 10 2.1 0 0.20 0.35 0.7 0.20 0.20 00.35 .35 0.7 0.70 1.05 1.05 1.4 1.40 1.75 1.75 1.4 1.75 2.1 1.75 1.75 2.10 2.1 Output Current (A) 15 V Min. 0 00 00 1.05 55 Output Current (A) Output Power Output Current Output Power vs.vs. Output Current 35 50 0 2.1 2.10 Output Current (A) 00 0.20 0.20 0.35 0.35 0.70 0.7 1.05 1.05 1.40 1.4 Output Current (A) Output Current (A) Output Current (A) Typical Performance Specifications: Parameter Input Current Value 260 mA Power Factor 0.99 THD 8% Driver Efficiency 83% Test Conditions t a = 25 °C, 0.70 A 26 W load, Maximum Light Output, K case 120 V~ without a dimmer Driver Efficiency vs. Output Power at 120 V~ Driver Efficiency vs. Output Power at 277 V~ 90 90 85 80 80 0.35 A Efficiency (%)Efficiency (%) Efficiency (%) Driver Efficiency vs. Output Power at 277 V~ 85 90 0.70 A 0.50 A 75 0.20 A 70 65 85 75 80 70 75 65 70 60 3 8 13 18 23 60 65 3 8 Output Power (W) 13 18 23 18 23 Output Power (W) 60 ® Job Name: Job Number: S P E C I F I C AT I O N S U B M I T TA L Model Numbers: 3 8 13 Output Power (W) Page 12 LED Dimming Driver Hi-lumeT A-Series LTE Architectural Dimming 369543i 13 09.22.15 “I” Output Range, Current Driver Models Driver Type Output Dimming Method Constant-Current Driver (Class 2) Output Voltage Pulse Width Modulation (PWM) 8–20 V PWM Constant-Current Reduction (CCR) 8–20 V - Output Current Output Power Standards Recognition UL® Listed Option (KL case) 0.71–1.05 A 6–21 W Type TL 80 º / 74 ºC - K-case Yes Type TL 90 º / 69 ºC - M-case When using QwikFigTM technology, these models can be built from the following bulk units: K-case - LTEA4U1UKx-2RBLK *; M-case - LTEA4U1UMN-2CBLK * x = studded (S) or Output non-studded (N)vs. Output Current Voltage Output Power vs. Output Current Current Driver Operation Range: 40 60 Output Voltage Output Current Output Voltage vs. vs. Output Current 40 Output Output Power (W) Power (W) Output Power (W) Output Voltage Output Voltage Output (V)(V) Voltage (V) 30 40 40 60 60 50 50 30 40 40 20 I 30 30 10 8 20 20 0 10 10 88 0 0.35 0.71 I 1.05 1.4 1.75 0.35 0.35 0.71 0.70 1.05 1.05 1.4 1.40 20 30 30 20 V Max. 15 25 25 I 10 20 20 5 15 15 I 0 0.20 0.35 0.7 1.05 55 Output Current (A) 00 25 35 35 0 10 10 2.1 00 Output Power Output Current Output Power vs.vs. Output Current 35 50 1.75 1.75 2.1 2.10 1.75 2.1 1.75 1.75 2.1 2.10 8 V Min. 00 Output Current (A) 1.4 Output Current (A) 0 0 0.20 0.35 0.35 0.20 0.7 0.70 1.05 1.05 1.4 1.40 Output Current Output Current(A) (A) Output Current (A) Typical Performance Specifications: Parameter Input Current Value 200 mA Power Factor 0.99 THD 11% Driver Efficiency 79% Test Conditions t a = 25 °C, 1.05 A 21 W load, Maximum Light Output, K case 120 V~ without a dimmer Driver Efficiency vs. Output Power at 120 V~ Driver Efficiency vs. Output Power at 277 V~ 90 90 85 85 Driver Efficiency vs. Output Power at 277 V~ 80 80 1.05 A 0.71 A Efficiency (%)Efficiency (%) Efficiency (%) 90 75 70 65 85 75 80 70 75 65 70 60 6 9 12 15 18 21 60 65 6 9 Output Power (W) 12 15 18 21 Output Power (W) 60 ® Job Name: Job Number: S P E C I F I C AT I O N S U B M I T TA L Model Numbers: 6 9 12 15 Output Power (W) 18 Page 21 13 LED Dimming Driver Hi-lumeT A-Series LTE Architectural Dimming 369543i 14 09.22.15 “J” Output Range, Current Driver Models Driver Type Output Dimming Method Constant-Current Driver (Class 2) Output Voltage Pulse Width Modulation (PWM) 15–38 V PWM Constant-Current Reduction (CCR) 15–38 V - Output Current Output Power Standards Recognition UL® Listed Option (KL case) 0.71–1.05 A 11–40 W Type TL 82 º / 68 ºC - K-case Yes Type TL 86 º / 78 ºC - M-case When using QwikFigTM technology, these models can be built from the following bulk units: K-case - LTEA4U1UKx-2SBLK *; M-case - LTEA4U1UMN-2BBLK * x = studded (S) or Output non-studded (N)vs. Output Current Voltage Output Power vs. Output Current Current Driver Operation Range: 40 60 Output Voltage Output Current Output Voltage vs. vs. Output Current 40 40 30 40 38 50 50 Output Power Output (W) Power (W) Output Power (W) Output Voltage Output (V) (V) Voltage (V) Output Voltage 60 60 30 J 40 40 38 38 20 15 30 30 J 10 20 20 15 15 0 0 10 10 0.71 0.35 1.05 1.4 1.75 38 V Max. 35 35 25 J 30 30 20 25 25 15 J 20 20 10 15 15 5 10 10 0 2.1 0 0.35 0.71 55 Output Current (A) 00 Output Power Output Current Output Power vs.vs. Output Current 35 50 0 00 0.35 0.35 0.71 0.70 1.05 1.05 1.4 1.40 1.75 1.75 1.05 1.4 1.75 2.1 1.75 1.75 2.10 2.1 Output Current (A) 15 V Min. 0 2.1 2.10 Output Current (A) 0 0 0.35 0.35 0.70 0.71 1.05 1.05 1.40 1.4 Output Current (A) Output Current (A) Output Current (A) Typical Performance Specifications: Parameter Input Current Value 390 mA Power Factor 0.99 THD 7% Driver Efficiency 84% Test Conditions t a = 25 °C, 1.05 A 40 W load, Maximum Light Output, K case 120 V~ without a dimmer Driver Efficiency vs. Output Power at 277 V~ 90 85 85 90 80 80 85 75 Efficiency (%) Efficiency (%) Efficiency (%) Driver Efficiency vs. Output Power at 120 V~ 90 1.05 A 0.71 A 70 65 60 10 15 20 25 Output Power (W) 30 35 40 Driver Efficiency vs. Output Power at 277 V~ 75 80 70 75 65 70 60 65 10 15 20 25 30 35 30 35 40 Output Power (W) 60 ® Job Name: Job Number: S P E C I F I C AT I O N S U B M I T TA L Model Numbers: 10 15 20 25 Output Power (W) Page 40 14 LED Dimming Driver Hi-lumeT A-Series LTE Architectural Dimming 369543i 15 09.22.15 “K” Output Range, Current Driver Models Driver Type Output Dimming Method Constant-Current Driver (Class 2) Output Voltage Pulse Width Modulation (PWM) 8–20 V PWM Constant-Current Reduction (CCR) 8–20 V - Output Current Output Power Standards Recognition UL® Listed Option (KL case) 1.06–1.50 A 9–30 W Type TL 80 º / 74 ºC - K-case Yes Type TL 90 º / 69 ºC - M-case When using QwikFigTM technology, these models can be built from the following bulk units: K-case - LTEA4U1UKx-2RBLK *; M-case - LTEA4U1UMN-2CBLK * x = studded (S) or Output non-studded (N)vs. Output Current Voltage Output Power vs. Output Current Current Driver Operation Range: 40 60 Output Voltage Output Current Output Voltage vs. vs. Output Current 40 40 30 40 Output Power Output (W) Power (W) Output Power (W) Output Voltage Output (V) (V) Voltage (V) Output Voltage 60 60 50 50 30 40 40 20 K 30 30 10 8 20 20 0 0 10 10 88 0.7 0.35 1.06 K 1.4 1.5 1.75 35 35 25 20 V Max. 30 30 20 K 25 25 15 20 20 10 K 15 15 5 10 10 0 2.1 0 0.35 0.7 00 1.4 1.5 1.05 55 Output Current (A) Output Power Output Current Output Power vs.vs. Output Current 35 50 1.75 2.1 1.75 1.75 2.10 2.1 8 V Min. Output Current (A) 0 00 0.35 0.35 0.7 0.70 1.06 1.05 1.4 1.5 1.75 1.401.50 1.75 0 2.1 2.10 Output Current (A) 0 0 0.35 0.35 0.70 0.7 1.05 1.05 1.40 1.5 1.4 1.50 Output Current (A) Output Current (A) Output Current (A) Typical Performance Specifications: Parameter Input Current Value 280 mA Power Factor 0.99 THD 12% Driver Efficiency 79% Test Conditions t a = 25 °C, 1.50 A 30 W load, Maximum Light Output, K case 120 V~ without a dimmer Driver Efficiency vs. Output Power at 277 V~ 90 85 85 90 1.20 A 80 1.06 A 1.50 A 75 70 65 60 9 11 1315 17192123 2527 29 Efficiency (%) Efficiency (%) Efficiency (%) Driver Efficiency vs. Output Power at 120 V~ 90 Driver Efficiency vs. Output Power at 277 V~ 80 85 75 80 70 75 65 70 60 65 9 11 13 15 Output Power (W) 17 19 21 23 25 27 23 25 27 29 Output Power (W) 60 ® Job Name: Job Number: S P E C I F I C AT I O N S U B M I T TA L Model Numbers: 9 11 13 15 17 19 21 Output Power (W) 29 Page 15 LED Dimming Driver Hi-lumeT A-Series LTE Architectural Dimming 369543i 16 09.22.15 “L” Output Range, Current Driver Models Driver Type Output Dimming Method Constant-Current Driver (Class 2) Output Voltage Pulse Width Modulation (PWM) 15–38 V PWM Constant-Current Reduction (CCR) 15–38 V - Output Current Output Power Standards Recognition UL® Listed Option (KL case) 1.06–1.50 A 16–40 W Type TL 82 º / 68 ºC - K-case Yes Type TL 86 º / 78 ºC - M-case When using QwikFigTM technology, these models can be built from the following bulk units: K-case - LTEA4U1UKx-2SBLK *; M-case - LTEA4U1UMN-2BBLK * x = studded (S) or Output non-studded (N)vs. Output Current Voltage Output Power vs. Output Current Current Driver Operation Range: 40 60 Output Voltage Output Current Output Voltage vs. vs. Output Current 40 40 30 40 Output Power Output (W) Power (W) 50 50 30 40 40 L 40 W Max. 20 30 15 30 L 10 20 20 15 15 0 0 0.7 0.35 1.06 1.4 1.5 1.75 00 30 30 20 L 25 25 15 20 20 10 15 V Min. 15 15 5 10 10 0 2.1 55 Output Current (A) L 35 35 25 Output Power (W) Output Voltage Output (V) (V) Voltage (V) Output Voltage 60 60 10 10 Output Power Output Current Output Power vs.vs. Output Current 35 50 0 0.35 0.7 1.4 1.5 1.05 1.75 2.1 1.75 1.75 2.10 2.1 Output Current (A) 0 00 0.35 0.35 0.7 0.70 1.06 1.06 1.401.50 1.75 1.4 1.5 1.75 2.10 2.1 Output Current (A) 0 0 0 0.35 0.35 0.70 0.7 1.05 1.05 1.40 1.5 1.4 1.50 Output Current (A) Output Current (A) Output Current (A) Typical Performance Specifications: Parameter Input Current Value 410 mA Power Factor 0.99 THD 9% Driver Efficiency 82% Test Conditions t a = 25 °C, 1.50 A 40 W load, Maximum Light Output, K case 120 V~ without a dimmer Driver Efficiency vs. Output Power at 277 V~ 90 85 85 90 80 80 85 75 1.06 A 1.20 A 1.50 A 70 65 60 16 19 22 25 28 31 34 37 40 Efficiency (%) Efficiency (%) Efficiency (%) Driver Efficiency vs. Output Power at 120 V~ 90 Driver Efficiency vs. Output Power at 277 V~ 75 80 70 75 65 70 60 65 16 19 22 25 Output Power (W) 28 31 34 37 40 34 37 40 Output Power (W) 60 ® Job Name: Job Number: S P E C I F I C AT I O N S U B M I T TA L Model Numbers: 16 19 22 25 28 31 Output Power (W) Page 16 LED Dimming Driver Hi-lumeT A-Series LTE Architectural Dimming 369543i 17 09.22.15 “M” Output Range, Current Driver Models Driver Type Output Dimming Method Constant-Current Driver (Class 2) Output Voltage Pulse Width Modulation (PWM) 8–19.9 V PWM Constant-Current Reduction (CCR) 8–19.9 V- Output Current Output Power Standards Recognition UL® Listed Option (KL case) 1.51–2.10 A 12–30 W Type TL 87 º / 72 ºC - K-case Yes Type TL 90 º / 73 ºC - M-case When using QwikFigTM technology, these models can be built from the following bulk units: K-case - LTEA4U1UKx-2ABLK *; M-case - LTEA4U1UMN-2ABLK * x = studded (S) or Output non-studded (N)vs. Output Current Voltage Output Power vs. Output Current Current Driver Operation Range: 40 60 Output Voltage Output Current Output Voltage vs. vs. Output Current Output Power Output Current Output Power vs.vs. Output Current 35 50 40 30 40 40 50 50 30 40 40 20 30 30 M 10 8 20 20 30 W Max. 0 10 0 10 88 0.35 0.7 1.05 1.4 1.51 M 1.75 Output Power Output (W) Power (W) Output Power (W) Output Voltage Output (V) (V) Voltage (V) Output Voltage 60 60 M 30 20 30 25 15 25 M 20 10 20 15 5 15 10 0 10 2.1 0 0.35 0.7 1.05 55 Output Current (A) 1.4 1.51 1.758 V Min. 2.1 Output Current (A) 00 00 35 25 35 0.35 00 0.35 0.70 0.7 1.06 1.05 1.401.51 1.75 1.4 1.51 1.75 2.10 2.1 0 0 Output Current (A) 0.35 0.35 0.7 0.70 1.4 1.51 1.40 1.51 1.05 1.05 1.75 2.1 2.10 1.75 Output Current (A) Output Current (A) Output Current (A) Typical Performance Specifications: Parameter Input Current Value 310 mA Power Factor 0.99 THD 14% Driver Efficiency 76% Test Conditions t a = 25 °C, 2.10 A 30 W load, Maximum Light Output, K case 120 V~ without a dimmer Driver Efficiency vs. Output Power at 277 V~ 90 85 85 90 80 80 85 75 70 1.51 A 1.75 A 2.10 A 65 60 12 14 16 18 20 22 24 26 28 30 Efficiency (%) Efficiency (%) Efficiency (%) Driver Efficiency vs. Output Power at 120 V~ 90 Driver Efficiency vs. Output Power at 277 V~ 75 80 70 75 65 70 60 65 12 14 16 18 Output Power (W) 20 22 24 26 28 30 24 26 28 30 17 Page Output Power (W) 60 ® Job Name: Job Number: S P E C I F I C AT I O N S U B M I T TA L Model Numbers: 12 14 16 18 20 22 Output Power (W) LED Dimming Driver Hi-lumeT A-Series LTE Architectural Dimming 369543i 18 09.22.15 “X” Output Range, Voltage Driver Models Driver Type Output Dimming Method Output Voltage Output Current Output Power Constant-Voltage Driver (Isolated, Non-Class 2) Pulse Width Modulation (PWM) 38.5–60.0 V PWM 0.08–1.04 A 5–40 W Standards Recognition UL® Listed Option (KL case) No Voltage Driver Operation Range: Output Current vs. Output Voltage Output Current vs. Output Voltage Output Current vs. Output Voltage 3.5 3.5 3.5 Output Power vs. vs. Output Voltage Output Power Output Voltage Output Power vs. Output Voltage 40 40 40 35 35 35 2.5 2 2.0 2 1.5 1.5 1.5 40 W Max. 1 1.0 1 0.5 5 W Min. 0 30 30 30 25 25 25 XX 20 20 20 15 15 15 10 10 10 0.5 0.5 0 0 Output Power (W) 2.5 2.5 Output Power (W) Output Power (W) Output Current(A)(A) Output Current Output Current (A) 3 3.0 3 0 0 0 10 10 10 20 20 20 30 30 30 5 55 X X 38.5 40 38.5 40 38.540 50 50 50 60 60 60 0 00 0 0 0 10 10 10 20 20 20 30 30 30 38.5 40 50 50 50 38.5 40 38.540 60 60 60 Output Voltage(V) (V) Output Voltage Output Voltage (V) Output Voltage(V) (V) Output Voltage Output Voltage (V) Typical Performance Specifications: Parameter Value Test Conditions Input Current 390 mA Power Factor 0.99 THD 10% Driver Efficiency 86% t a = 25 °C, 60.0 V 40 W load, Maximum Light Output, K case 120 V~ without a dimmer Driver Efficiency vs. Output Power at 120 V~ 90 90 90 85 85 85 38.5 V 80 80 80 48.0 V Efficiency (%) Efficiency (%) Efficiency (%) 60.0 V 75 70 75 75 70 70 65 65 65 60 5 Driver Efficiency vs. Output Power at 277 V~ Driver Efficiency vs. Output Power at 277 V~ 10 15 Job Number: 25 30 35 40 Output Power (W) ® Job Name: 20 S P E C I F I C AT I O N S U B M I T TA L Model Numbers: 60 60 5 5 10 10 15 15 20 20 25 25 30 30 35 35 40 40 Output Power (W) Output Power (W) Page 18 LED Dimming Driver Hi-lumeT A-Series LTE Architectural Dimming 369543i 19 09.22.15 “Y” Output Range, Current Driver Models Driver Type Output Dimming Method Constant-Current Driver (Isolated, Non-Class 2) Output Voltage Pulse Width Modulation (PWM) 30–60 V PWM Constant-Current Reduction (CCR) 30–60 V - Output Current Output Power Standards Recognition UL® Listed Option (KL case) 0.20–0.50 A 6–30 W Type TL 80 º / 72 ºC - K-case No Type TL 89 º / 74 ºC - M-case When using QwikFigTM technology, these models can be built from the following bulk units: K-case - LTEA4U1UKx-1ABLK *; M-case - LTEA4U1UMN-1ABLK * x = studded (S) or non-studded (N) Output Voltage vs. Output Current Output Power vs. Output Current Current Driver Operation Range: 40 60 Output Voltage vs. vs. Output Current Output Voltage Output Current 40 40 30 Y 40 Output Power Output (W) Power (W) Output Power (W) Output Voltage Output (V)(V) Voltage (V) Output Voltage 60 60 50 50 Y 30 40 40 Output Power vs.vs. Output Current Output Power Output Current 35 50 20 30 30 10 20 20 35 35 25 30 30 20 60 V Max. 25 25 15 20 20 10 Y 15 15 5 10 10 0 0 10 10 0 0.20 0.35 0.50 0.7 1.05 1.4 1.75 2.1 55 Y 0 V 0.35 30 0.50 0.20 Min.0.7 1.05 Output Current (A) 00 0.20 0.35 0.50 0.7 0.200.35 0.50 0.70 1.05 1.05 1.4 1.40 1.75 2.1 Output Current (A) 00 1.4 1.75 1.75 2.1 2.10 00 0 0.20 0.35 0.50 0.7 0 0.200.350.50 0.70 1.05 1.05 1.4 1.40 1.75 1.75 2.1 2.10 Output Current (A) Output Current (A) Output Current (A) Output Current (A) Typical Performance Specifications: Parameter Input Current Value 290 mA Power Factor 0.99 THD 11% Driver Efficiency 84% Test Conditions t a = 25 °C, 0.50 A 30 W load, Maximum Light Output, K case 120 V~ without a dimmer Driver Efficiency vs. Output Power at 277 V~ Driver Efficiency vs. Output Power at 120 V~ 90 90 0.50 A 85 Driver Efficiency vs. Output Power at 277 V~ 85 90 75 80 85 Efficiency (%) Efficiency (%) Efficiency (%) 0.35 A 80 0.20 A 70 65 60 6 9 12 15 18 21 24 27 30 75 80 70 75 65 70 60 65 6 9 12 15 Output Power (W) 18 21 24 27 24 27 30 Output Power (W) 60 ® Job Name: Job Number: S P E C I F I C AT I O N S U B M I T TA L Model Numbers: 6 9 12 15 18 21 Output Power (W) Page 30 19 LED Dimming Driver Hi-lumeT A-Series LTE Architectural Dimming 369543i 20 09.22.15 “Z” Output Range, Current Driver Models Driver Type Output Dimming Method Constant-Current Driver (Isolated, Non-Class 2) Output Voltage Pulse Width Modulation (PWM) 30–60 V PWM Constant-Current Reduction (CCR) 30–60 V - Output Current Output Power Standards Recognition UL® Listed Option (KL case) 0.51–1.00 A 16–40 W Type TL 80 º / 72 ºC - K-case No Type TL 89 º / 74 ºC - M-case When using QwikFigTM technology, these models can be built from the following bulk units: K-case - LTEA4U1UKx-1ABLK *; M-case - LTEA4U1UMN-1ABLK * x = studded (S) or non-studded (N) Output Voltage vs. Output Current Output Power vs. Output Current Current Driver Operation Range: 60 40 Output Voltage vs. Output Current Output Voltage vs. vs. Output Current Output Voltage Output Current 40 40 40 Z 40 50 50 50 30 40 40 40 Z Z 20 30 30 30 10 20 20 20 35 35 35 25 Z Z 30 30 30 20 25 25 25 15 30 V Min. 20 20 20 10 15 15 15 5 10 10 10 0 0 10 10 10 0 0.35 0.51 0.7 1.00 1.4 1.75 2.1 5 55 Output Current (A) 0 00 Z 60 V Max. 30 40 W Max. Output OutputPower Power Output (W) (W) Power (W) Output Power (W) Output OutputVoltage Voltage Output (V) (V) Voltage (V) Output Voltage (V) 60 Output Power vs. Output Current Output Power vs.vs. Output Current Output Power Output Current 35 50 60 60 00 0 0.35 0.51 0.7 0.51 0.70 0.35 0.7 0.350.51 1.00 1.00 1.00 1.4 1.4 1.40 1.75 1.75 1.75 2.1 2.1 2.10 0 0.35 0.51 0.7 1.4 1.00 1.75 2.1 1.75 1.75 1.75 2.1 2.10 2.1 Output Current (A) 0 00 0 0.35 0.7 0.51 0.70 0 0.350.51 0 0.35 0.51 0.7 1.00 1.00 1.00 1.4 1.40 1.4 Output Current (A)(A) Output Current Output Current (A) Output Output Current Current (A) (A) Output Current (A) Typical Performance Specifications: Parameter Input Current Value 410 mA Power Factor 0.99 THD 8% Driver Efficiency 83% Test Conditions t a = 25 °C, 1.00 A 40 W load, Maximum Light Output, K case 120 V~ without a dimmer Driver Efficiency vs. Output Power at 277 V~ 90 85 85 90 90 80 0.51 A 0.70 A 75 70 65 60 6 9 12 15 18 21 75 80 80 70 75 75 65 70 70 60 65 65 Job Name: Job Number: 15 20 25 15 15 20 20 25 25 Output Power (W) 60 60 ® Driver Driver Efficiency Efficiency vs. vs. Output Output Power Power at at 277 277 V~ V~ 80 85 85 1.00 A Efficiency Efficiency(%) (%) Efficiency (%) Efficiency (%) Driver Efficiency vs. Output Power at 120 V~ 90 S P E C I F I C AT I O N S U B M I T TA L Model Numbers: 30 35 40 Output Power (W) 30 30 Output Output Power Power (W) (W) 35 35 40 Page 40 20 LED Dimming Driver Hi-lumeT A-Series LTE Architectural Dimming 369543i 21 09.22.15 Bulk Model Coverage - K-Case Model Numbers For use with Lutron® QwikFigTM technology 3ABLK Operation Range: Bulk Model Driver Type Output Dimming Method 3ABLK Constant-Current Driver Constant-Current Reduction (Class 2) (CCR) Output Voltage Output Current Output Power 30–54 V - 0.20–1.00 A 6–40 W Type TL 82 º / 74 ºC Output Output Current LED Load OutputPower Range:vs. Constant-Current Drivers E and F 45 30 V Minimum 54 V Maximum 40 Standards Recognition 3A = Covers “LED Load Output Range” E and F (CCR dimming only) Output Power (W) Output Power (W) 35 35 F 30 25 20 15 E 10 5 0 0 0 0.70 0.20 0.35 0.35 0.50 0.20 0.50 0.70 1.05 1.001.05 1.40 1.40 1.75 1.75 2.10 Output Current (A) Output Current (A) Driver Efficiency vs. Output Power at 277 V~ 90 ® 85 Job Name: S P E C I F I C AT I O N S U B M I T TA L Model Numbers: 0.35 A 80 ncy (%) Job Number: 0.20 A 75 Page 0.50 A 21 LED Dimming Driver Hi-lumeT A-Series LTE Architectural Dimming 369543i 22 09.22.15 Bulk Model Coverage - K-Case Model Numbers (continued) For use with Lutron® QwikFigTM technology 2HBLK and 2SBLK Operation Range: Bulk Model Driver Type 2HBLK Constant-Current Driver (Class 2) Output Dimming Method Output Voltage Pulse Width Modulation (PWM) 15–38 V PWM Constant-Current Reduction (CCR) 15–38 V - Pulse Width Modulation Constant-Current Driver (PWM) (Class 2) Constant-Current Reduction (CCR) 2SBLK 0.20–0.70 A 3–26.6 W 15–38 V PWM 0.71–1.50 A 15–38 V - 30 11–40 W Type TL 82 º / 68 ºC 2H = C overs “LED Load Output Range” H 2S = Covers “LED Load Output Range” J and L 15 V Minimum 35 35 Standards Recognition Type TL 84 º / 62 ºC 38 V Maximum 40 Output Power (W) Output Power PowerConstant-Current vs. Output Current LED Load Output Output Range: Drivers H, J, and L 45 Output Power (W) Output Current L 25 J 20 15 H 10 5 0 0 0 0.70 0.20 0.35 0.35 0.50 0.20 0.50 0.70 1.05 1.001.05 1.40 1.401.50 1.75 1.75 2.10 Output Current (A) Output Current (A) ® Job Name: S P E C I F I C AT I O N S U B M I T TA L Model Numbers: Driver Efficiency vs. Output Power at 277 V~ 90 Job Number: 85 Page 22 LED Dimming Driver Hi-lumeT A-Series LTE Architectural Dimming 369543i 23 09.22.15 Bulk Model Coverage - K-Case Model Numbers (continued) For use with Lutron® QwikFigTM technology 2GBLK, 2RBLK, and 2ABLK Operation Range: Bulk Model Driver Type 2GBLK Constant-Current Driver (Class 2) Output Voltage Pulse Width Modulation (PWM) 8–20 V PWM Constant-Current Reduction (CCR) 8–20 V - Pulse Width Modulation Constant-Current Driver (PWM) (Class 2) Constant-Current Reduction (CCR) 2RBLK Pulse Width Modulation Constant-Current Driver (PWM) (Class 2) Constant-Current Reduction (CCR) 2ABLK 45 Output Dimming Method Output Current Output Power 0.20–0.70 A 2–14 W Type TL 86 º / 57 ºC 8–20 V PWM 0.71–1.50 A 6–30 W 1.51–2.10 A 12–30 W 8–20 V - Type TL 87 º / 72 ºC 8–19.9 V - Output Power vs. Output Current LED Load Output Range: Constant-Current Drivers G, I, K, and M 20 V Maximum 2G = C overs “LED Load Output Range” G 2R = C overs “LED Load Output Range” I and K 2A = C overs “LED Load Output Range” M 35 35 Output Power (W) Type TL 80 º / 74 ºC 8–19.9 V PWM 40 Output Power (W) Standards Recognition 30 25 M 20 K 15 I 10 8V Minimum G 5 0 0 0 0.70 0.20 0.35 0.50 0.200.350.50 0.70 1.05 1.001.05 1.40 1.40 1.50 1.75 1.75 2.10 Output Current (A) Output Current (A) ® Job Name: S P E C I F I C AT I O N S U B M I T TA L Model Numbers: Job Number: Driver Efficiency vs. Output Power at 277 V~ 90 Page 23 LED Dimming Driver Hi-lumeT A-Series LTE Architectural Dimming 369543i 24 09.22.15 Bulk Model Coverage - K-Case Model Numbers (continued) For use with Lutron® QwikFigTM technology 1ABLK Operation Range: Bulk Model Driver Type 1ABLK Constant-Current Driver (Isolated, Non-Class 2) Output Dimming Method Output Voltage Pulse Width Modulation (PWM) 30–60 V PWM Constant-Current Reduction (CCR) 30–60 V - 0.20–1.00 A 6–40 W Standards Recognition Type TL 80 º / 72 ºC 1A = Covers “LED Load Output Range” Y and Z 60 V Maximum 40 30 V Minimum 35 35 Output Power (W) Output Power Output Output Current LED Load OutputPower Range:vs. Constant-Current Drivers Y and Z 45 Output Power (W) Output Current Z 30 25 M 20 K Y 15 10 5 0 0 0 0.20 0.35 0.35 0.50 0.20 0.50 0.70 0.70 1.05 1.001.05 1.40 1.40 1.50 1.75 1.75 2.10 Output Current (A) Output Current (A) Driver Efficiency vs. Output Power at 277 V~ 90 ® Job Name: 85 S P E C I F I C AT I O N S U B M I T TA L Model Numbers: Page 0.50 A Job Number: (%) 80 0.20 A 0.35 A 24 LED Dimming Driver Hi-lumeT A-Series LTE Architectural Dimming 369543i 25 09.22.15 Bulk Model Coverage - M-Case Model Numbers For use with Lutron® QwikFigTM technology 3ABLK Operation Range: Bulk Model Driver Type Output Dimming Method 3ABLK Constant-Current Driver Constant-Current Reduction (Class 2) (CCR) Output Voltage Output Current Output Power 30–54 V - 0.20–1.00 A 6–40 W Type TL 86 º / 72 ºC Output Output Current LED Load OutputPower Range:vs. Constant-Current Drivers E and F 45 30 V Minimum 54 V Maximum 40 Standards Recognition 3A = Covers “LED Load Output Range” E and F (CCR dimming only) Output Power (W) Output Power (W) 35 35 F 30 25 20 15 E 10 5 0 0 0 0.70 0.20 0.35 0.35 0.50 0.20 0.50 0.70 1.05 1.001.05 1.40 1.40 1.75 1.75 2.10 Output Current (A) Output Current (A) Driver Efficiency vs. Output Power at 277 V~ 90 ® 85 Job Name: S P E C I F I C AT I O N S U B M I T TA L Model Numbers: 0.35 A 80 ncy (%) Job Number: 0.20 A 75 Page 0.50 A 25 LED Dimming Driver Hi-lumeT A-Series LTE Architectural Dimming 369543i 26 09.22.15 Bulk Model Coverage - M-Case Model Numbers (continued) For use with Lutron® QwikFigTM technology 2BBLK Operation Range: Bulk Model Driver Type 2BBLK Constant-Current Driver (Class 2) Output Dimming Method Output Voltage Pulse Width Modulation (PWM) 15–38 V PWM Constant-Current Reduction (CCR) 15–38 V - 0.20–1.50 A 3–40 W Standards Recognition Type TL 86 º / 78 ºC 38 V Maximum 40 2B = C overs “LED Load Output Range” H, J, and L 15 V Minimum 35 35 Output Power (W) Output Power PowerConstant-Current vs. Output Current LED Load Output Output Range: Drivers H, J, and L 45 Output Power (W) Output Current 30 L 25 J 20 15 H 10 5 0 0 0 0.20 0.35 0.35 0.50 0.20 0.50 0.70 0.70 1.05 1.00 1.05 1.40 1.40 1.75 1.75 2.10 Output Current (A) Output Current (A) Driver Efficiency vs. Output Power at 277 V~ 90 ® Job Name: 85 S P E C I F I C AT I O N S U B M I T TA L Model Numbers: Page 0.50 A Job Number: (%) 80 0.20 A 0.35 A 26 LED Dimming Driver Hi-lumeT A-Series LTE Architectural Dimming 369543i 27 09.22.15 Bulk Model Coverage - M-Case Model Numbers (continued) For use with Lutron® QwikFigTM technology 2CBLK and 2ABLK Operation Range: Bulk Model Driver Type 2CBLK Constant-Current Driver (Class 2) Output Dimming Method Output Voltage Pulse Width Modulation (PWM) 8–20 V PWM Constant-Current Reduction (CCR) 8–20 V - Pulse Width Modulation Constant-Current Driver (PWM) (Class 2) Constant-Current Reduction (CCR) 2ABLK Output Current Output Power 0.20–1.50 A 2–30 W Type TL 90 º / 69 ºC 8–19.9 V PWM 1.51–2.10 A 8–19.9 V - PowerConstant-Current vs. Output Current LED Load Output Output Range: Drivers H, J, and L 45 20 V Maximum 40 Standards Recognition 12–30 W Type TL 90 º / 73 ºC 2C = C overs “LED Load Output Range” G, I, and K 2A = C overs “LED Load Output Range” M Output Power (W) Output Power (W) 35 35 30 25 M 20 K 15 I 10 8V Minimum G 5 0 0 0 0.20 0.35 0.35 0.50 0.20 0.50 0.70 0.70 1.05 1.001.05 1.40 1.401.50 1.75 1.75 2.10 Output Current (A) Output Current (A) ® Job Name: S P E C I F I C AT I O N S U B M I T TA L Model Numbers: Driver Efficiency vs. Output Power at 277 V~ 90 Job Number: 85 Page 27 LED Dimming Driver Hi-lumeT A-Series LTE Architectural Dimming 369543i 28 09.22.15 Bulk Model Coverage - M-Case Model Numbers (continued) For use with Lutron® QwikFigTM technology 1ABLK Operation Range: Bulk Model Driver Type 1ABLK Constant-Current Driver (Isolated, Non-Class 2) Output Dimming Method Output Voltage Pulse Width Modulation (PWM) 30–60 V PWM Constant-Current Reduction (CCR) 30–60 V - 0.20–1.00 A 6–40 W Standards Recognition Type TL 89 º / 74 ºC 1A = Covers “LED Load Output Range” Y and Z 60 V Maximum 40 30 V Minimum 35 35 Output Power (W) Output Power Output Output Current LED Load OutputPower Range:vs. Constant-Current Drivers Y and Z 45 Output Power (W) Output Current Z 30 25 M 20 K Y 15 10 5 0 0 0 0.20 0.35 0.35 0.50 0.20 0.50 0.70 0.70 1.05 1.00 1.05 1.40 1.40 1.50 1.75 1.75 2.10 Output Current (A) Output Current (A) Driver Efficiency vs. Output Power at 277 V~ 90 ® Job Name: 85 S P E C I F I C AT I O N S U B M I T TA L Model Numbers: Page 0.50 A Job Number: (%) 80 0.20 A 0.35 A 28 LED Dimming Driver Hi-lumeT A-Series LTE Architectural Dimming 369543i 29 09.22.15 K Case: Case Dimensions C J* A I* H* B E D F G K Case: Connector Location Dimensions K* L O P K* Q 8-32 Threaded Studs* L M N Q A B C D E 4.20 in (107 mm) 1.00 in (25 mm) 3.00 in (76 mm) 4.90 in (124 mm) 4.60 in (117 mm) (mounting center) F G H* I* J* 1.42 in (36 mm) 1.99 in (51 mm) 1.11 in (28 mm) 2.00 in (51 mm) 1.60 in (41 mm) R* K* L M N O 0.33 in (8.3 mm) 0.65 in (16.5 mm) 0.75 in (19 mm) 1.73 in (44 mm) 1.33 in (34 mm) P 0.74 in (19 mm) Q 0.32 in (8 mm) R* 0.29 in (7 mm) * Applies to studded K case only. ® Job Name: Job Number: S P E C I F I C AT I O N S U B M I T TA L Model Numbers: Page 29 LED Dimming Driver Hi-lumeT A-Series LTE Architectural Dimming 369543i 30 09.22.15 K Case: Side Entry Connector Location Dimensions (Non-Studded) S U T S T U V 1.38 in (35 mm) 0.64 in (16 mm) 0.88 in (22 mm) 1.53 in (39 mm) V M Case: Case Dimensions C B A A B C D 14.125 in (359 mm) 13.68 in (347 mm) (mounting center) 1.18 in (30 mm) 1.00 in (25 mm) D ® Job Name: Job Number: S P E C I F I C AT I O N S U B M I T TA L Model Numbers: Page 30 LED Dimming Driver Hi-lumeT A-Series LTE Architectural Dimming 369543i 31 09.22.15 KL Case: Case Dimensions A B C D E A 4.89 in (124 mm) 2.62 in (66 mm) 4.00 in (102 mm) 1.62 in (41 mm) 4.00 in (102 mm) B D C E KL case includes a 4 in (102 mm) square junction box which complies with NEMA® OS 1-2008 Figure 112. Knockouts Driver Wiring and Mounting •Sides –8 locations: 0.5 in (13 mm) –4 locations: 0.5/0.75 in (13/19 mm) •Bottom –2 locations: 0.5 in (13 mm) –2 locations: 0.5/0.75 in (13/19 mm) •Driver is grounded by the green ground wire connection on the enclosure or by the ground lug terminal in the junction box •Driver and junction box must be grounded in accordance with local and national electrical codes •All wire connections must be made in the junction box to maintain UL® listing •4 in (102 mm) square junction box is 1.5 in (38 mm) deep with 22.0 in 3 (360.5 cm 3) capacity and complies with NEMA® OS 1-2008 Figure 112 •Driver is pre-wired with 6 in (152 mm), 18 AWG (0.75 mm 2) solid copper leads in all terminal blocks ® Job Name: Job Number: S P E C I F I C AT I O N S U B M I T TA L Model Numbers: Page 31 LED Dimming Driver Hi-lumeT A-Series LTE Architectural Dimming 369543i 32 09.22.15 Wiring Controls Requiring Neutral Note: Colors shown correspond to terminals on driver. Wiring Diagram LutronR Neutral-wire Forward Phase Dimmer Line Dimmed Line (Black) +V (Red)2 Hi-lumeT A-Series LED Dimming Driver Neutral Ground1 Neutral Neutral (White) Ground (Green)1 1 2 LED Light Engine –V (Black)2 Ground1 Ground wire connection available on K case models only. Fixture and driver case must be grounded in accordance with local and national electrical codes. For maximum driver-to-LED light engine wire length, see charts in Driver Leads section at the end of the document. Compatible Controls: Lutron® Neutral-wire Dimmers Guaranteed performance specifications with the controls listed in the chart below. For assistance selecting controls, contact our LED Center of Excellence at 1.877.346.5338 or LEDs@lutron.com A B B B C Drivers per Control B: End of Gang C: Middle of Gang Product Part Number Low-End Setting/Load-Type Setting* Maestro WirelessR 600 W dimmer MRF2-6ND-120- Trim low-end per APM App Note (LutronR P/N 048370) 1 – 8 1 – 8 1 – 8 Maestro WirelessR 1000 W dimmer low-end per APM App Note MRF2-10ND-120- Trim (LutronR P/N 048370) 1 – 13 1 – 13 1 – 13 CasétaR Wireless Pro 1000 W dimmer PD-10NXD- Trim low-end per instructions at www.casetawireless.com/lowend 1 – 13 1 – 13 1 – 13 GRAFIK TT C)LR dimmer GT-250MGTJ-250M- Set low-end trim per dimmer installation instructions 1 – 10 1 – 10 1 – 10 HomeWorksR QS adaptive dimmer HQRD-6NA- LED LutronR A-Series 2-Wire 1 – 8 1 – 8 1 – 8 HomeWorksR QS 600 W dimmer HQRD-6ND- LED LutronR A-Series 2-Wire 1 – 8 1 – 8 1 – 8 HomeWorksR QS 1000 W dimmer HQRD-10ND- LED LutronR A-Series 2-Wire 1 – 13 1 – 13 1 – 13 RadioRAR 2 adaptive dimmer RRD-6NA- Hi-lumeR A-Series LTE LED Driver 2-Wire 1 – 8 1 – 8 1 – 8 RadioRAR 2 1000 W dimmer RRD-10ND- Set Device type to “INC/MLV Neutral Dimmer”; Set High-End Trim to 99%; Set Low-End Trim to 35% 1 – 13 1 – 13 1 – 13 A: Not Ganged B * Setting the low-end trim and load type is necessary to ensure optimal performance and 1% dimming capability. Note: For information about Legacy Product use in existing control application, contact LEDs@lutron.com ® Job Name: Job Number: S P E C I F I C AT I O N S U B M I T TA L Model Numbers: Page 32 LED Dimming Driver Hi-lumeT A-Series LTE Architectural Dimming 369543i 33 09.22.15 Wiring (continued) Controls Requiring Neutral (continued) Note: Colors shown correspond to terminals on driver. Wiring Diagram LutronR Dimming Module/Panel Line Dimmed Line (Black) +V (Red)2 Hi-lumeT A-Series LED Dimming Driver Neutral Neutral Ground1 Neutral (White) Ground (Green)1 1 2 LED Light Engine –V (Black)2 Ground1 Ground wire connection available on K case models only. Fixture and driver case must be grounded in accordance with local and national electrical codes. For maximum driver-to-LED light engine wire length, see charts in Driver Leads section at the end of the document. Compatible Controls: Lutron® Dimming Modules/Panels Guaranteed performance specifications with the controls listed in the chart below. For assistance selecting controls, contact our LED Center of Excellence at 1.877.346.5338 or LEDs@lutron.com Product Part Number Drivers per Control Low-End Setting/Load-Type Setting* myRoomTM DIN power module MQSE-4A1-D 1 – 6 (per output); 1 A maximum driver input current LED Lutron® A-Series 2-Wire HomeWorks® QS DIN power module LQSE-4A1-D 1 – 6 (per output); 1 A maximum driver input current LED Lutron® A-Series 2-Wire HomeWorks® QS wallbox power module (per output); HQRJ-WPM-6D-120 2 – 10 26 total per module LED Lutron® A-Series 2-Wire HomeWorks® wallbox power module HWI-WPM-6D-120 2 – 10 (per output); 26 total per module Set load type to “GRX‑FDBI or GRX-TVI” GRAFIK Eye® QS control unit QSGR-, QSGRJ- 2 – 10 (per output); 26 total per unit GRAFIK Eye® 3000 control unit GRX-3100-, GRX-3500- 2 – 10 (per output); 26 total per module Set load type to “GRX‑FDBI or GRX-TVI” Set load type to “Fluorescent Module” LED Lutron® A-Series 2-Wire RPM-4U module (LCP, HomeWorks® QS, HW-RPM-4U-120, GRAFIK SystemsTM, Quantum®) LP-RPM-4U-120 2 – 26 (per output); 26 total per module RPM-4A module (LCP, HomeWorks® QS, HW-RPM-4A-120, GRAFIK SystemsTM, Quantum®) LP-RPM-4A-120 1 – 13 (per output); 26 total per module Set load type to “2-1” GP dimming panels 1 – 26 Set load type to “2-1” Various Set load type to “2-1” LED Lutron® A-Series 2-Wire * Setting the low-end trim and load type is necessary to ensure optimal performance and 1% dimming capability. ® Job Name: Job Number: S P E C I F I C AT I O N S U B M I T TA L Model Numbers: Page 33 LED Dimming Driver Hi-lumeT A-Series LTE Architectural Dimming 369543i 34 09.22.15 Wiring (continued) Controls Not Requiring Neutral Note: Colors shown correspond to terminals on driver. Wiring Diagram Line LutronR Non-Neutral Forward Phase Dimmer Dimmed Line (Black) +V (Red)2 Hi-lumeT A-Series LED Dimming Driver Ground1 Neutral LED Light Engine Neutral (White) Ground (Green)1 –V (Black)2 Ground1 Ground wire connection available on K case models only. Fixture and driver case must be grounded in accordance with local and national electrical codes. 2 For maximum driver-to-LED light engine wire length, see charts in Driver Leads section at the end of the document. 1 Compatible Controls: Lutron® Non-Neutral Dimmers Guaranteed performance specifications with the controls listed in the chart below. For assistance selecting controls, contact our LED Center of Excellence at 1.877.346.5338 or LEDs@lutron.com A B B B C Drivers per Control B: End of Gang C: Middle of Gang Part Number Low-End Setting/ Load-Type Setting* Ariadni® C•L® 250 W dimmer AYCL-253P- Set low-end trim dial to 1 o’clock. Adjust slightly if needed. See Figure 1 under ‘Dimmer Range Adjustment’ section in the Dimmer Installation Guide for how to adjust low-end trim 1 – 8 1 – 8 1 – 8 Diva® C•L® 250 W dimmer Set low-end trim dial to 10 o’clock. Adjust slightly if needed. See Figure DVCL-253P1 under ‘Dimmer Range DVSCCL-253P- Adjustment’ section in the Dimmer Installation Guide for how to adjust low-end trim 1 – 8 1 – 8 1 – 8 Nova T*® C•L® 250 W dimmer NTCL-250- 1 – 10 1 – 10 1 – 10 Product Set low-end trim per dimmer installation instructions A: Not Ganged B * Setting the low-end trim and load type is necessary to ensure optimal performance and 1% dimming capability. Note: For information about Legacy Product use in existing control application, contact LEDs@lutron.com ® Job Name: Job Number: S P E C I F I C AT I O N S U B M I T TA L Model Numbers: Page 34 LED Dimming Driver Hi-lumeT A-Series LTE Architectural Dimming 369543i 35 09.22.15 ELECTRICIANS AND CONTRACTORS FACILITIES MANAGERS Driver Leads SERVICE Maximum driver-to-LED light engine wire length for Constant-Current Drivers: Maximum Lead Length Wire Gauge 200 mA to 700 mA 710 mA to 1.50 A 1.51 A to 2.10 A 18 AWG (0.75 mm2) 30 ft (9 m) 15 ft (4.5 m) 10 ft (3 m) 16 AWG (1.5 mm ) 35 ft (10.5 m) 25 ft (7.5 m) 15 ft (4.5 m) 14 AWG (2.5 mm2) 50 ft (15 m) 40 ft (12 m) 25 ft (7.5 m) 12 AWG (4.0 mm2) 100 ft (30 m) 60 ft (18 m) 40 ft (12 m) 2 Maximum driver-to-LED light engine wire length for Constant-Voltage Drivers: Maximum Lead Length Wire Gauge 10 to 20 V- 20.5 to 40 V- 40.5 to 60 V- 18 AWG (0.75 mm2) 10 ft (3 m) 15 ft (4.5 m) 30 ft (9 m) 16 AWG (1.5 mm ) 15 ft (4.5 m) 25 ft (7.5 m) 50 ft (15 m) 14 AWG (2.5 mm2) 25 ft (7.5 m) 40 ft (12 m) 75 ft (22.5 m) 12 AWG (4.0 mm ) 40 ft (12 m) 60 ft (18 m) 100 ft (30 m) 2 2 Warranty For warranty information, please visit www.lutron.com/BallastDriverWarranty.pdf Replacement Parts When ordering Lutron® replacement parts please provide the full model number. Consult Lutron® Technical Support if you have any questions. Further Information For further information, please visit us at www.lutron.com/hilumeLED or contact our LED Control Center of Excellence at 1.877.346.5338 or LEDs@lutron.com Wiring and Grounding Driver and lighting fixture must be grounded. Drivers must be installed per national and local electrical codes. LED Load Replacement For Class 2 rated drivers, the LED load can be changed while the driver is installed and powered. Maximum Driver Operating Temperature Driver case temperature (t c ) must not exceed UL® conditions of acceptability in end product. For 50,000 hour lifetime, driver case temperature (t c ) must not exceed 65 °C. ® Job Name: Job Number: S P E C I F I C AT I O N S U B M I T TA L Model Numbers: Page 35