ACCESSORIES
Brackets for fixing to a wall
Specifications
The top units and certain types of standard floor-mounted cabinets can be
supplied complete with 4 brackets on the bottom plate which allow them to be
fixed to a wall. The brackets can be supplied:
• loose, for subsequent assembly by the customer;
• applied to the cabinets in the factory.
Both top units and cabinets can be fitted with wall-mounting brackets in the
factory (see tables).
Description
Code
Model
Brackets for fixing to a wall
(loose version)
095770939
G/SFP
Version on brackets for fixing
to a wall
097770028
G-EA/SFP
Intermediate compartment partitions
Specifications
Equipped with rubber channels at the sides to allow cables, raceways or
supports for panel structures to be routed between the compartments. The
partitions are included in the supply of multiple compartment cabinets, preengineered for assembly on a level with the separation point using brackets.
The partitions can be supplied individually as spare parts or for installation in
cabinets with built-in plinths (versions G../…/ZT) so as to separate the plinth
compartment from the apparatus compartment which, in the standard version,
are communicating throughout the entire section of the cabinet.
The partitions must be chosen to suit the cabinet in question and its depth
(330-460 mm).
Materials
Depth 460 mm
Depth 330 mm
3 mm thick bakelite. Side channels in EPDM rubber.
70
Cabinet series
Code
Model
Grafi 5
095775508
G5/SSV
Grafi 7
095777504
G7/SSV
Grafi 9
095779500
G9/SSV
Grafi 12
095771507
G12/SSV
Cabinet series
Code
Model
Grafi 5
095775557
GH5/SSV
Grafi 7
095777553
GH7/SSV
Grafi 9
095779559
GH9/SSV
Grafi 12
095771556
GH12/SSV
G E N E R A L CATA LO G U E G R A F I
•
CONCHIGLIA SPA
Lower cabinet closing partitions
Specifications
G…/SIC - Closed version in which holes can be made on site
G…/SIM - Version with diam. 76 mm holes complete with tapering fairleads in
thermoplastic material. The partitions must be chosen to suit the cabinet in
question and its depth (330-460 mm).
Materials
A
3 mm thick bakelite.
The lower partitions can be used on request:
• in all floor-mounted cabinets to provide additional protection in the area where
cables are routed into the cabinet from cable channels (A).
• to separate the top unit from the lower compartment when the version preengineered for top unit assembly with the maximum height (B) is used.
The lower partition is part of the standard equipment supplied for IP55 cabinets.
Depth 330 mm
Cabinet
series
PARTITION WITH TAPERED FAIRLEADS
Code
Model
Description
Grafi5
095775409 G5/SIC
095775425
G5/SIM
3 tapered fairleads
ø 76 mm
Grafi DIN 0
Grafi7
095777405
G7/SIC
095777421
G7/SIM
3 tapered fairleads
ø 76 mm
Grafi DIN 1
Grafi9
095779401
G9/SIC
095779427
G9/SIM
3 tapered fairleads
ø 76 mm
Grafi DIN 2
Grafi12
095771408 G12/SIC
095771424 G12/SIM
4 tapered fairleads
ø 76 mm
Cabinet
series
Depth 460 mm
CLOSE PARTITION
Code
Model
CLOSE PARTITION
Code
Model
PARTITION WITH TAPERED FAIRLEADS
Code
Model
Description
Grafi5
095777454 GH5/SIC
095775474 GH5/SIM
3 tapered fairleads
ø 76 mm
Grafi7
095777454
GH7/SIC
095777470 GH7/SIM
3 tapered fairleads
ø 76 mm
Grafi9
095779450 GH9/SIC
095779450 GH9/SIM
3 tapered fairleads
ø 76 mm
Grafi12
095771457 GH12/SIC
095771473 GH12/SIM
4 tapered fairleads
ø 76 mm
G E N E R A L CATA LO G U E G R A F I
•
B
CONCHIGLIA SPA
71
ACCESSORIES
Accessories for creating panels with modular apparatus
Specifications
Grafi cabinets have a wide range of accessories that can be used to build
panels with modular components. Besides the single-component cabinets,
multiple compartment cabinets can be customized in different ways so that the
individual compartments can be used in the most appropriate way.
The components in the system - Key
1 - G. /SM upright fixing brackets
2 - G-./MT uprights for supporting internal accessories
3 - G././TPM panel bearing frames
4 - G./PC blank panels
5 - G./PM slotted panels
6 - G././CST rack to hold modular equipment
7 - G/SP bracket/plate kit to use in conjunction with the racks
72
G E N E R A L CATA LO G U E G R A F I
•
CONCHIGLIA SPA
Hinge pillar kit
Specifications
Grafi cabinets can be customized so that the door can be opened from the
required side. The side on which the doors of cabinets with one compartment
or multiple compartments are opened can be inverted by fitting the standard
hinge pillar kit on the cabinet.
A further hinge pillar kit, chosen to suit the overall height of the cabinet, must
be installed if the doors of the individual compartments must be opened from
different sides.
The Kit contains the hinge pillar + fastening screws.
Materials
Electrolytically galSpacezed steel.
Overall height
Code
Model
940 mm
095774055
G-5/KM-CRN
Grafi7
1120 mm
095774063
G-6/KM-CRN
Grafi9
1390 mm
095774089
G-8/KM-CRN
1840 mm
095774097
G-9/KM-CRN
Cabinet series
Grafi5
Grafi12
Two doors
cabinet with
reverse opening
Four doors
cabinet with
different opening
Fixing frame
Specifications
Screws in AISI304 stainless steel to guarantee access over time.
Complete with brackets for fixing onto a concrete base
The fixing frames must be chosen to suit the cabinet in question (Grafi 5-Grafi
7-Grafi 9-Grafi 12) and its depth (330 mm - 460 mm).
Materials
Depth 460 mm
Depth 330 mm
Made of steel with black coloures 18/24 cataphotetic coating treatment.
Cabinet series
Code
Model
Grafi 5
095775300
G5/TA
Grafi 7
095777306
G7/TA
Grafi 9
095779302
G9/TA
Grafi 12
095771309
G12/TA
Cabinet series
Code
Model
Grafi 5
095775359
GH5/TA
Grafi 7
095777355
GH7/TA
Grafi 9
095779351
GH9/TA
Grafi 12
095771358
GH12/TA
G E N E R A L CATA LO G U E G R A F I
•
CONCHIGLIA SPA
73
ACCESSORIES
Air vents
Specifications
Air diffusion area: 2200 sq mm
Protection degree IP 44 according to IEC EN 60529, IK 10 according to IEC EN 62262.
Diameter of hole for application - 140 mm.
Application of a pair of air vents integrates the standard thermal power
dissipation value by 100 Watt (consult the Maximum load and Thermal power
dissipation pages in the reference section for further details).
Materials
External cap made of SMC (fiberglass-reinforced plastic) RAL 7038 colour.
Internal protection grille made of polyamide resin (Pa6 V2) RAL 7040 grey colour.
Description
Code
Model
Loose version
095770962
G-BAF/160
Applied version
097770036
G-EA/BAF/160
AXIAL FAN for air vents
Specifications
Axial fan for forced aeration pre-engineered for application to air vents type BAF/160.
220/240 V AC power supply voltage
Frequency 50/60 Hz.
Current: 0.06A
Power: 13 W
Air flow rate: 13.6 l/s
Application of a pair of air vents, one of which with an axial fan, integrates the
standard thermal power dissipation value by 250 Watt.
(Consult the Maximum load and Thermal power dissipation pages in the
reference sections for further details).
74
Code
Model
095432001
VENTIL/BAF/160
G E N E R A L CATA LO G U E G R A F I
•
CONCHIGLIA SPA