12111
Pull Down Clamping Screws
eccentric
Material
Steel 1.4112, hardened.
Technical Notes
Single piece clamping screw. Unique
eccentric side profile of the clamp
ensures both downhold and side
clamping action.
"x" - clamp stroke when clamping
above component surface.
"z" - clamp stroke when clamping
below component surface.
Clamping stroke achieved via 135°
turn of clamping screw.
Order No.
12111.W1004
12111.W1005
12111.W1006
12111.W1008
12111.W1010
12111.W1012
a
9,2
11,4
14,2
18,0
22,2
27,0
b
M4
M5
M6
M8
M10
M12
c
3
4
5
6
7
9
d
8
10
12
16
20
24
e
3,0
3,5
4,5
5,5
6,5
8,0
f
4,6
5,7
7,1
8,9
11,1
13,5
g
4,0
5,0
6,1
7,7
9,4
11,6
a/f
2,5
3,0
4,0
5,0
6,0
8,0
wixroyd.com
x
3,5
4,2
5,4
6,6
8,3
10,1
z
4,2
5,2
6,4
8,0
9,8
12,0
p1
p2
Clam
Holdin Max.
p
g force torque
stroke
kN.
Nm
0,09
0,10
0,30
2,70
4,00
5,40
1,5
2,0
5,0
22,0
35,0
45,0
0,6
0,7
1,0
1,2
1,2
1,9
X
g
1,8
2,4
6,3
9,1
15,9
31,0
Pull Down Clamping Screws
eccentric
12111
Material
Steel 1.4112, hardened.
Technical Notes
Single piece clamping screw. Unique
eccentric side profile of the clamp
ensures both downhold and side
clamping action.
"x" - clamp stroke when clamping
above component surface.
"z" - clamp stroke when clamping
below component surface.
Clamping stroke achieved via 135°
turn of clamping screw.
wixroyd.com
12111
Eccentric Pull Down Clamping Screw
A unique one piece eccentric pull down clamping screw whose compact design makes it an ideal solution for
providing both pull down and side clamping forces in applications where space is limited. Our eccentric Pull
Down Clamping Screw, uniquely combines a tapered cone and an off-set eccentric thread to provide clamping
above or below a component’s surface.
Unique solution
Advantages
CLAMPING & HEIGHT SETTING
• Durable, stable, compact design.
• Unaffected by swarf ingress.
• Easily actuated.
• Effective side and down force clamping.
• High clamping force.
• Small installation foot print, ideal for
multi-component clamping.
• Low height clamping solution.
Installation
• Drill and tap hole for required clamp size.
• Install screw into the hole, and lower to the
desired height of the component.
• Ensure the flat side of the clamp is facing
the work piece - to allow for easy installation
of component.
• Make a 1/3 turn of the screw to clamp
the component.
• A simple 1/3 reverse turn of the screw unclamps
the component.
Clamping above component.
clamping round components
very low clamping solution
Clamping below component surface.
multi-component clamping
20
0845 26 66 577
info@wixroyd.com