Time Electronics
TTS-100 Torque Tester System
• Calibrate torque wrenches, pulse tools, hand screwdrivers, and power tools
• Complete solution with torque transducers, mounts and calibration software available
• System Accuracy ± 0.5% of reading from 10% to 100% of full scale
• Seven units of torque measurements: (ozf.in, lbf.in, lbf.ft, cN.m, N.m, kgf.m, kgf.cm)
• Selection of three operation modes: Peak, Track, First Peak
• Simple operation with easy to use menus and calibration prompts
• Auto filter frequency selection based upon tool type being used in Peak mode
• Large easy to read eight digit LCD display
• Compact, lightweight unit supplied with carry case
• USB interface and EasyCal calibration software compatible
DESCRIPTION
The TTS-100 is a torque calibration system that offers a solution for torque measurement applications. The torque
tester unit provides an easy to use interface that connects to a dedicated torque transducer to perform the calibration
of a wide range of torque tools. The system accuracy is ± 0.5% of reading from 10% to 100% of full scale. The tester
unit has three operating modes that are Peak, Track and First Peak. It monitors torque and pulse count, and displays
both the peak torque and the number of pulses performed during a preset time frame to reach the final torque value.
The accompanying torque transducers are bench mounted calibration instruments designed for the calibration of torque
wrenches, torque screwdrivers, and electric & pneumatic screwdrivers. Transducers are available ranging from 1.5 cN.m
(2 ozf.in) up to 27,000 N.m (20,000 lbf.ft). Each transducer is bi-directional with a female square drive, and connect to the
tester via a port on the side of the unit. Bench mounts are available to provide a firm base for each transducer.
The TE torque calibration system is EasyCal software compatible with connection via USB on the tester unit.
Automating the calibration process provides increased speed of calibration and consistency of results. Produce
calibration certificates and reports to ISO 9001, ISO 17025, and other international quality standards.
www.timeelectronics.com
Torque Tester and Transducers Specifications
TTS-100 Torque Tester System
System Accuracy................................. ± 0.5% of reading from 10% to 100% of full scale
Operating Modes................................. Peak, Track, First Peak
Units of Measure.................................. ozf.in, lbf.in, lbf.ft, cN.m, N.m, kgf.m, kgf.cm
OCP Protection.................................... Over Current Protection (OCP) protects unit from damage or malfunction
Display................................................. Eight digit, two line LCD dot matrix display
Power................................................... Mains or battery (NimH, charger supplied)
Battery.................................................. 8 hours typical operation. 4 hours typical recharge time.
Interfaces.............................................. 1 x Torque Transducer connection port, 1 x USB port
Dimensions.......................................... W 148mm x H 118mm x D 48.7mm / 5.8” x 4.63” x 1.92”
Weight.................................................. 0.88kg / 1.94 lbs
Environmental...................................... Operating Temperature: 0°C to 50°C
............................................................. Storage Temperature: -20°C to 70°C
............................................................. Humidity: Maximum of 95% Relative Humidity
Supplied with....................................... Carry case, USB cable, rechargeable battery and universal charger
Options................................................. Torque Transducers (see below)
............................................................. Cable for TE-TRQ transducer to TTS-100 tester
............................................................. Mounts for Torque Transducer
............................................................. TE-TRQ-LB Loading Benches (see separate data sheet)
Torque Transducer Ranges
TE-TRQ-X20z........................................ Torque Transducer - 1.5 to 14 cN.m (2 to 20 ozf.in), drive size 1/4 F/Sq
TE-TRQ-X40z........................................ Torque Transducer - 2.9 to 28.2 cN.m (4 to 40 ozf.in), drive size 1/4 F/Sq
TE-TRQ-X80z........................................ Torque Transducer - 5.7 to 56.5 cN.m (8 to 80 ozf.in), drive size 1/4 F/Sq
TE-TRQ-X10i......................................... Torque Transducer - 11.3 to 113 cN.m (1 to 10 lbf.in), drive size 1/4 F/Sq
TE-TRQ-X25i......................................... Torque Transducer - 28.25 to 282.5 cN.m (2 to 25 lbf.in), drive size 1/4 F/Sq
TE-TRQ-X50i......................................... Torque Transducer - 56.5 to 565 cN.m (5 to 50 lbf.in), drive size 1/4 F/Sq
TE-TRQ-X100i....................................... Torque Transducer - 113 to 1130 cN.m (10 to 100 lbf.in), drive size 1/4 F/Sq
TE-TRQ-X250i....................................... Torque Transducer - 282.5 to 2825 cN.m (25 to 250 lbf.in), drive size 1/4 F/Sq TE-TRQ-X500i ...................................... Torque Transducer - 565 to 5650 cN.m (50 to 500 lbf.in), drive size 3/8 F/Sq
TE-TRQ-X750i....................................... Torque Transducer - 847 to 8473 cN.m (75 to 750 lbf.in), drive size 3/8 F/Sq
TE-TRQ-X50F....................................... Torque Transducer - 6.8 to 67.8 N.m (5 to 50 lbf.ft), drive size 3/8 F/Sq
TE-TRQ-X100F..................................... Torque Transducer - 13.56 to 135.6 N.m (10 to 100 lbf.ft), drive size 1/2 F/Sq
TE-TRQ-X250F..................................... Torque Transducer - 33.9 to 339 N.m (25 to 250 lbf.ft), drive size 1/2 F/Sq
TE-TRQ-X500F..................................... Torque Transducer - 67.8 to 678 N.m (50 to 500 lbf.ft), drive size 3/4 F/Sq
TE-TRQ-X1000F................................... Torque Transducer - 135.6 to 1355 N.m (100 to 1000 lbf.ft), drive size 1 F/Sq
TE-TRQ-X2500F................................... Torque Transducer - 339 to 3389 N.m (250 to 2500 lbf.ft), drive size 1 1/2 F/Sq
TE-TRQ-X5000F................................... Torque Transducer - 678 to 6779 N.m (500 to 5000 lbf.ft), drive size 1 1/2 F/Sq
TE-TRQ-X10000F................................. Torque Transducer - 1335 to 13558 N.m (1000 to 10000 lbf.ft), drive size 2 1/2 F/Sq
TE-TRQ-X20000F................................. Torque Transducer - 2711 to 27116 N.m (2000 to 20000 lbf.ft), drive size 2 1/2 F/Sq
Transducer Specifications................... Rated Output: 2mv/v Nominal
............................................................. Safe Overload: 125% of Rated Output
............................................................. Bridge Resistance: 350 Ohms Nominal
............................................................. Non linearity: 0.1% of Rated Output
Cables and Mounts
TE-TRQ-CBL......................................... Cable for TE-TRQ transducer to TTS-100
TE-TRQ-MB-1....................................... Mount for Torque Transducer: For use with TE-TRQX20z - TE-TRQX500F
TE-TRQ-MB-3....................................... Mount for Torque Transducer: For use with TE-TRQX1000F - TE-TRQX5000F
Ordering Information
TTS-100.............................................. Torque Tester System
Transducers......................................... TE-TRQ-X20z to TE-TRQ-X20000F, see above for available models
TE-TRQ-CBL......................................... Cable for TE-TRQ transducer to TTS-100
TE-TRQ-MB-1....................................... Mount for Torque Transducer: For use with TE-TRQX20z - TE-TRQX500F
TE-TRQ-MB-3....................................... Mount for Torque Transducer: For use with TE-TRQX1000F - TE-TRQX5000F
ECFL.................................................... EasyCal Calibration Software - Full License
Due to continuous development Time Electronics reserves the right to
change specifications without prior notice.
Time Electronics Ltd, Unit 11 Sovereign Way, Botany Industrial Estate, Tonbridge, Kent, TN9 1RH. United Kingdom.
T: +44 (0) 1732 355993 F: +44 (0) 1732 770312 E: mail@timeelectronics.co.uk W: www.timeelectronics.com
v1b 31/1/15