RoHS compliant DTS series Thru-hole mounting type Dip switch. 2.54mm terminal pitch. Stable quality by making use of gold plated contacts and terminals. When mounting on board, prevent to contact with terminals because terminals not appear outside . □ SPECIFICATIONS □ At current charge Rating At switching Temperatur At operation e Range At storage □ Environmental Performance □ DC50V 100μ∼0.1A DC6V 100μ∼0.1A DC24V 100μ∼0.025A -20∼80℃ -55∼85℃ □ Electrical Performance □ Contact Resistance Max.50mΩ Insulation Resistance DC100V Min.100MΩ Tast name -55℃ 96hours DTS-DS : 10.0N(1000gf)以下 Cycle of Temperature □ Mechanical Performance □ DTS : 7.0N(700gf)以下 DTS-H : 10.0N(1000gf)以下 DTS-DS : 10.0N(1000gf)以下 DTS-SD : 10.0N(1000gf)以下 Criteria Contact Resistance Max.50mΩ Insulation Resistance Dry Heat 85℃ 96hours DC100V Min.10MΩ Withstand Voltage Humidity 40℃ 90∼95% 240hours (Steady condition) AC500V 1minuts Operation Force Humidity DTS : 7.0N(700gf)以下 (Cycle of -10∼65℃、0∼98RH temperature & DTS-H : 10.0N(1000gf)以下 24hours、10cycles Cold humidity) Withstand Voltage AC500V 1minute Operation Force Test Conditions Life with load -20(30minute)∼70℃(30minute) DTS-SD : 10.0N(1000gf)以下 5cycles 2000cycles (20∼25cycles/minute) DC24V0.025A (with resistive load) Resistance to Soldering Heat Please refer to the flow profile Contact Resistance Max.50mΩ Insulation Resistance DC100V Min.100MΩ Withstand Voltage AC500V 1minuts □ Caution □ Test of Solder Heat Resistance is confirmed in the right figure of this specification. Soldering operation(Facilities,Temperature condition etc) may differ in various conditions of used machines, equipment etc of customers. Please check your solder heat resistance on your soldering operation. flow profile for soldering heat evaluation Number of soldering flow 1 time Manual 1 time manual 360±5℃ 3±0.5sec MKK MATSUKYU CO,.LTD