14B-11
ALTD ORDERING INFORMATION
Catalog
Number*
"ALTD06200R
ALTD06200RL
ALTD06150-H
CONT.
AMPS
600
600
600
BIL
kV
200
200
150
POWER SYS1EMS
MOMENTARY
AMPERES
40,000
40,000
40,000
RATED
ULTIMATE
STRENGTH
Ib.
15,000
15,000
15,000
WEIGHT
Ib.
11
13
12
kg.
4.9
5.7
5.4
* Suffix "R" indicates the EPDM insulator, suffix "H" indicates the Epoxilator® insulator, suffix "RL" indicates
EPDM insulator and 600-Amp Arc Chute interrupter.
f
RUS Listed.
The Arc Chute Interrupter
With the addition of the arc chute interrupter, the switch
becomes a loadbreak device allowing the ALTD switch to
interrupt load currents up to 600 amperes at 15.5kV recovery
voltage. Switching of loop circuits up to 600 amps is another
capability of the arc chute interrupter. The ALTD switch
with arc chute interrupter is also rated for interruption of
magnetizing current, line charging current, cable charging
current, and capacitor switching.
ALTD with factory mounted load-breaking arc chute interrupter and EPDM insulator.
Extension link mounting on 15° standoff for vertical blade
opening.
Detail of link mounted on adapter positioned in clamp-top
insulator to provide vertical blade opening.
12"
/
5/8" x 1-1/2"
/For 5/8" dia. pin
IWI
0
L-ievis ri
With
Cotter Key
Optional Extension Link/Adapter
This optional assembly provides a twist-free application by
attaching one end of the ALTD switch to a clamp-top insulator.
The adapter portion enables the desired plane of blade
movement to be attained regardless of the angle the supporting insulator makes with the pole. Also, blades can be made
to operate in parallel planes or in different planes, if line
configuration and ease of access make this advantageous.
The desired plane of blade action can be set for use on poletop insulators, on horizontal or 5-degree standoffs and on 15or 30-degree side-mounted standoffs.
To order these accessories at additional cost, add letter
suffix indicated to switch number above. Also add accessory weight to switch weight. Items selected are packed
with the switch and carton so marked. Example: For
switch with four stainless-steel terminal bolts, Epoxilator®
insulator and extension-link assembly, order
ALTD06150-HE.
Suffix
B
C
E
Description
4 stainless-steel terminal bolts
Extension link/angle adapter
B and C above
Weight,
Ib.
3
/4
BVz
4l/4
P r-o q
u_3-7/&!
n-n
J
1 /O" .
J^41-^'
3 UNC-2B
All Holes
HUBBELL / CHANCE - CENTRALIA, MISSOURI
JULY 1996