8 7 4 5 6 1 2 3 REVISIONS F E REV. ECO. NO DESCRIPTION DATE BY A 1451 INIIAL RELEASE 08/13/07 RAH B 1660 04/15/08 ASK C 1871 ADD TOLERANCE TO TABLE UPDATE DRAWING VIEWS, TEXT & TOLERANCE BLOCK 12/08/08 JH F E B .084 2.14 A D D .118 3.00 .039 1.00 .091 2.30 C C .050 1.27 .016 0.40 02-20, 0.20mm MAX. 21-50, 0.30mm MAX. A B A B NOTES: 1. INSULATOR MATERIAL: NYLON 9T. *PROCESSING TEMPERATURE = 260° C FOR 10 SEC. 2. CONTACT MATERIAL: BRASS. 3. PLATING: GOLD FLASH OVERALL. 4. OPERATING TEMPERATURE: -40°C TO +105° C. 5. INSULATION RESISTANCE: 5000 MEGA OHM MIN. 6. CONTACT RESISTANCE: 20 MILLI OHM MAX. 7. DIELECTRIC WITHSTANDING: AC 500V. 8. UL FLAMMABILITY RATING: 94V-0. 9. CURRENT RATING: 1 AMP. RECOMMENDED PCB HOLE LAYOUT UNLESS OTHERWISE SPECIFIED: Pb *INDICATED TEMPERATURE AND TIME IS FOR COMPONENT INSULATOR. HIGHER PROCESSING TEMPERATURES MAY BE USED, PROVIDED HEAT IS APPLIED FROM BACK SIDE OF PCB, AND INSULATOR DOES NOT EXCEED INDICATED TEMPERATURE AND TIME. 8 7 .028±.002 0.70±0.05 .050 1.27 6 DIMENSIONS ARE IN INCHES[MM] TOLERANCES: ANGULAR: .XX= .012 [.30] .XXX= .008 [.20] .XXXX= ..004 [.10] SURFACE FINISH: 63 Ra REMOVE ALL BURRS AND SHARP EDGES .010 MAX RoHS COMPLIANT 5 4 DRAWN NAME 12/08/08 JH THE INFORMATION HEREIN CONTAINS PROPIETARY INFORMATION OF SULLINS ELECTRONICS AND IS NOT DESCRIPTION TO BE REPRODUCED, USED OR DISCLOSED TO OTHERS FOR ANY PURPOSE EXCEPT AS SPECIFICALLY PART NUMBER AUTHORIZED IN WRITING BY AN OFFICER OF SULLINS ELECTRONICS. .050" SINGLE ROW MALE HEADER, ST GRPB_ _1VWVN-RC SIZE DWG. NO. C INTERPRET DIMENSIONS AND GEOMETRIC TOLERANCING PER: ANSI Y14.5M-1994 3 DATE REV 10957 SCALE: 8:1 2 C SHEET 1 OF 1 1 FILE NAME: Z:\COMPONENTS\Taiwan\10957, GRPB_ _1VWVN-RC PRINT: 2/2/2009 A