High quality adjustable pedestals for all types of terraces

advertisement
DPH-serie
High quality adjustable pedestals for all
types of terraces
www.buzon.eu
DPH-Serie
High quality adjustable pedestals for
commercial & domestic applications
Founded in 1987, Buzon Pedestal Inte-
1
5
1
manufacturer of screw-jack pedestals.
Buzon screw-jack pedestals offer uninterrupted adjustability, are made from
Support head
Surface area 175 cm2. The head of the support is
screwed directly on to the base, or on to the coupler.
The head, a diameter of 150 mm, can be fitted with
various components to support differing surfaces.
national is the first and leading European
2 Couplers
6
78% recycled and 100% recyclable polypropylene and support loads of more
The coupler is used when the height of the pedestal
exceeds 175 mm (DPH 5 and upwards). Two
Integrated tabs on either side allow for mechanical
fixing or cross-bracing, guaranteeing enhanced
stability when the height exceeds 600mm. They are
used for DPH-6 to DPH-11.
2
than 1000 kg per pedestal. They can be
adjusted to compensate for up to 5%
pitch, or compensate for locally uneven
sub-bases up to the same amount.
3 Adjusment ring
Once pedestals are at the required height,
High to low, with a diameter of 115 mm and screw
pitch reversed.
their position is fixed with unique
lockable keys.
4
The pedestals and their accessories are
The base can be simply positioned or fixed to any
substrate. It has 8 fixing holes, for screws or bolts. The
head, coupler ring and the base have a safety ‘stop’
pin, to prevent over extension. Base diameter 200mm,
surface area 314cm2.
3
equally suited to applications at
Base
ground or roof level and from prestige,
highly aesthetic projects to industrial,
performance-orientated applications.
5 Slope corrector (0-5%)
Buzon is geared towards giving the speci-
The slope corrector (0 to 5%) is integrated on the
head of the pedestal DPH-4 to DPH-11. For DPH-0 to
DPH-3 see figure below with PH5 (0 to 5%)
fier not just a product that meets and
4
exceeds the required specification, but
technical and on-site support that
6
ensures the installation proceeds on spec,
Locking keys
Lock pedestal at required height to ensure no
subsequent rotational movement caused by
traffic or vibration.
on time and on budget.
The slope corrector from 0 to 5 %
Manufactured in polypropylene, the slope corrector PH5 can compensate, horizontally, the slope from 0 to 5% (slope from 0 to 5 cm per meter).
For a good water run-off for roofs, the slope minimum will be 2%.
PH5
0 – 5% (0 – 5cm/m)
0%
The slope correcteur is integrated on the head of the pedestals
DPH4 to DPH11
To compensate a slope
from 0 to 5% (slope from 0 to
5 cm per linear metre).
For a good water run-off on roofs,
the slope minimum to be 2%.
PH5 slope corrector can ONLY be
used with the pedestals DPH0 DPH1 - DPH2 and DPH3.
5%
0%
*
*
Adjustable from 35 to 850 mm uninterrupted
Standard pedestals from 17 to 175 mm
Extension from 175 to 850 mm (with coupler C3)
x2
B2
T2
B3
T3
*Test available on request.
Heights of pedestals Buzon DPH-Serie
B4
T4/PH5
B5
T5/PH5
B5
C2
T5/PH5
B5
C2
x3
T5/PH5
B5
C2
x4
T5/PH5
B5
C2
x5
T5/PH5
B5
C2
x6
T5/PH5
B5
C2
T5/PH5
800 mm
700 mm
600 mm
500 mm
400 mm
300 mm
DPH2
+
DPH3
PH5
=
PH5
45 to 63 mm
60 to 88 mm
+
=
200 mm
100 mm
DPH-0
DPH-1
17 mm
DPH-2
28 mm
35 to 53 mm
Tabs
DPH-3
50 to 78 mm
DPH-4
74 to 110 mm
Joist cradle
The head can be fitted with tabs, to give the desired opening
between tiles (for water drainage and ventilation).
Support for any kind of structure :
• Timber batten (joists)
• Composite battens
• Aluminium support structures
Width of the support: 65 mm. Fixing holes on both
sides of the Kit for mechanical fixing.
DPH-5
100 to 175 mm
DPH-6
175 to 290 mm
Shims
DPH-7
245 to 405 mm
DPH-8
320 to 520 mm
Locking keys
8 mm
4,5 mm
10 mm
530 to 850 mm
190cm 2
315cm 2
315cm 2
190cm 2
Key
x2
6 mm
rf-2 mm
460 to 750 mm
DPH-11
If the application requires a larger surface for support, or to
maximise surface area nearest to the building.
Stability
- Longevity
-
+
B
2 mm
390 to 635 mm
DPH-10
DPH-5 reversal
- Security
Made in EPDM of 1 or 2 mm reinforced (Shore 50),
for use with marble, stone slabs, granite etc for :
• anti slip values
• Shock & sound absorbtion
Allows to compensate during the installation, the
differences in thickness of the stones used.
DPH-9
Key
x2
+
Z
Key
x2
++
A
A
Applications
On request*, our design department
will furnish Architects & Specifiers
files and drawings in 2D and support
documentation. Our files & drawings
are designed to work with clients
software, and can be’ lifted and
dropped’ directly onto plans and
specification requirements.
* Specifications and drawings by request only.
DPH Pedestals supporting large format marble tiles
Public Terrace area in wooden decking.
Fountain Terrace in Dubai Marine UAE
Restaurant terrace utilising concrete tiles
With concrete tile
References
Acropolis Museum - Greece
European Central Bank Head Office – G.D. Luxembourg
University hospital– Liège (Belgium)
Chambre of Commerce – Luxembourg
• Site of the Parliament of the EU, Brussels - Belgium (2 000 m ² with base to
55 cm)
• Military Royal School, Brussels - Belgium (Timber terrace - 1.500m ²)
• National museum of Tokyo - Japan (300 m ²)
• University hospital of Kansas City - the United States (1 000m ²)
• University of Denver, Colorado - the United States
• Building of the site of the European Parliament, Strasbourg - France (2
000m ²)
• Site of the General society, Brussels - Belgium
• Bank Communal Crédit, Brussels - Belgium
• Disneyland, Paris - France (500m ²)
• Industrial laboratory of Films FUJY - France
• Metro Station – Lisbon (Portugal) (1 000 m²)
• Petrnoas Tower – Kuale Lumpur – Malaysia
• Diabete Traitement Center – Kuwait
• National Threatre – Singapore (1 500m²)
• City Bank – Bahrain (875m²)
• Amusament Park - Belgium
National bookshop – Pretoria
(South Africa)
Office Building - Greece
Embassy - Paris (France)
Military royal school, Brussels - Belgium
Temple – Tokyo (Japon) – Arch. Shinkenchiku-Sha
University of Denver, Colorado - the United States
BUZON Pedestal International s.a.
Z. I. des Hauts-Sarts, Zone 1
Prolongement de la rue de l'Abbaye
B-4040 Herstal (Belgique – Europe)
Tél. : +32 (0)4 248 39 83 – Fax : +32 (0)4 264 82 38
info@buzon.eu – www.buzon.eu
Buzon© - DPH Série 9688 - AN - 03/11
Terrace fountain – Singapour
Download