Completions and Production
Workover Systems
Introduction
Baker Hughes is a leader in well completion and intervention solutions that help exploration and production companies maximize the
value of their oil and gas assets by optimizing recovery while reducing capital and operating expense.
Baker Hughes was founded 100 years ago on a simple, fundamental commitment to help our customers solve their oilfield problems
by bringing them the highest quality and best performing products and services. Honoring that commitment and providing flawless
execution at the well site continues to distinguish us from our competitors a century later.
We believe that integrity is at the heart of our organization and that teamwork leverages individual strengths and contributes to our
performance culture. We also believe that learning is never finished and that we can continue to grow and improve—as individuals
and as a company—through learning. These are the principles that help guide us in our actions and decisions every day. Delivering
unmatched value to our customers by meeting—and sometimes exceeding—their needs and expectations is our ultimate goal.
Baker Hughes, a Fortune 500 company and one of the most respected names in the oil and gas service industry, provides best-in-class
products, systems and services for every phase of the hydrocarbon life cycle.
i
ii
Introduction
Baker Hughes, applying innovation and technology to your workover
Baker Hughes workover systems group is a part of the company’s wellbore intervention group and offers a unique combination of
products and services that are specifically designed for downhole interventions to reduce cost and increase production. The workover
systems group consists of the following product lines:
„„Remedial
systems cased holed products
production injection packers (PIP™s)
„„Drillstem testing and environment services
„„Inflatable
This diverse range of systems gives the workover systems group the opportunity to service customer requirements with the most
divergent range of conveyance methods, including drillpipe, threaded pipe, coiled tubing, snubbing pipe, electric wireline, and slickline.
The ethic of the workover systems group is based around offering unmatched service and the use of these product lines either jointly or
separately to provide our customers with a proven commitment to implement a solution to economically achieve the workover objective.
Cased hole products
The QUIK Drill™ composite bridge and frac plugs continue to be the most dynamic portfolio in the remedial systems product line. As
domestic and international market requirements shift, experience, knowledge, and new technologies are applied to create innovative
products. Recent developments include the incorporation of nonmetallic backup systems in some assemblies and the expansion of the
HPHT set of tools.
The remedial systems product line has also met significant challenges such as the development of the GTV™ LOK-SET™ retrievable
bridge plug. The GTV design was qualified to the V0 acceptance criterion, as defined by the API Specification/SO 14310 14310:2001 (E)
standard. The knowledge gained during work on this tool has prepared us to tackle similar demands for future products.
Inflatable products
Baker Hughes is the recognized leader in the manufacture and supply of inflatable products and systems. The versatility of the inflatable
element allows tools to be set in the most diverse range of environments, including cased hole, slotted pipe, perforations, screens, and
openhole. The exceptional expansion and sealing capabilities of a flexible elastomer element enable these tools to withstand conditions
that would be impossible for conventional packing elements. Whether the application is to plug, pack, test, treat, squeeze, or straddle,
Baker Hughes can supply an inflatable system to provide an economical and reliable solution.
The Blue Whale™, developed for drilling type applications seen in offshore environments, is recognized for its reliability and robust
design. When assembled with the GT™ unloader subassembly, it becomes a heavy-duty retrievable bridge plug that allows testing from
above and below in cased and open hole.
The Blue Whale platform was used to create the permanent Blue Whale bridge plug and the resettable blue whale. The permanent
Blue Whale bridge plug provides a more economical alternative in situations when the assembly will be left in the hole. The resettable
Blue Whale is well suited for applications that require multiple sets in the same trip.
iii
iv
Alphabetical Product Index
Remedial Systems
Products and Applications................................................1–85
Retrievable Bridge Plugs
C Retrievable Bridge Plug............................................................�� 24
Combination Bottomhole Assemblies............................................33
Compression Set Service Packers
D-1 and D-2 Latching-Type Packer Plugs....................................��� 32
Big Bore Retrievamatic Service Packer............................................4
F Latching-Type Packer Plug........................................................... 32
Compression Set Service Packers and Accessories..............................1
FT Latching-Type Packer Plug......................................................... 32
EA Retrievamatic Service Packer......................................................2
G LOK-SET Retrievable Bridge Plug................................................ 27
Heavy Duty Retrievamatic Service Packer....................................... 4
GT LOK-SET Retrievable Bridge Plug.............................................. 26
P-2 Set-Down Unloading Sub...........................................................3
GTV LOK-SET Retrievable Bridge Plug ........................................... 25
Retrievamatic II Service Packer........................................................ 3
H Washover-Type Retrieving Head...............................................� 24
RC-2 Hydro-Grip Cementer................................................................2
L LOK-SET Retrieving Head............................................................. 27
S Full-Bore Tubing Tester..................................................................2
LT-CT LOK-SET Retrieving Head...................................................�� 26
M Retrieving Head.......................................................................... 29
Control Valves and Surge Valves
MWG Retrieving Head.................................................................... 28
Control Valves...........................................��������������������������������������� 7
Retrievable Bridge Plugs.................................................................23
D Surge Valve System.....................................................................��9
Sealer Ball Catcher........................................................................� 24
E Tubing Control Valve...................................................................... 8
Sealer Ball Catcher........................................................................� 26
F Circulating Sub............................................................................... 9
WG Retrievable Bridge Plug........................................................... 28
F Test and Stimulation Valve..........................................................� 8
Wireline Set Retrievable Bridge Plug............................................. 29
Model A Back-Pressure Valve.......................................................... 8
Model A Dual Surge Valve System................................................���9
Straddle Treatment Tools and Accessories
Pressure-Actuated Stimulation Valve...............................................8
A-1 Mechanical Collar Locator.......................................................41
Surge Valves.....................................................................................7
C Injection Control Valve (ICV)........................................................40
C Packing Element Circulating Washer.......................................��� 37
Heavy Duty Compression Set Service Packers
E Circulating Washer with Model A Sliding Sleeve Valve.............39
ASAP Surface Isolation System....................................................��16
HD Set-Down Anchor......................................................................38
B Retrievamatic Service Packer.......................................................12
Injection Control Valve (ICV)...........................................................40
Heavy Duty Compression Set Service Packers..............................�11
Mechanical Injection Control Valve................................................ 36
Hydraulic Disconnect......................................................................15
Model A Set-Down Anchor.............................................................38
J Retrievamatic Service Packer.....................................................��13
Service Adaptable Packer-SAP Tool............................................... 36
L Retrievamatic Service Packer.....................................................��13
Straddle Treatment Tools and Accessories....................................35
Rotational Equalizing Sub with ASAP Blanking Plug......................17
Unloading Injection Control Valve (UICV).......................................41
Safety Joint Overshot.....................................................................17
Twin-Thread Safety Joint................................................................17
Drillable Products
B-1 Tubing Size Cement Retainer.................................................�� 57
Tension Set Service Packers
Big Bore Cement Retainers............................................................58
C-1 and C-2 Full-Bore Service Packer.............................................. 20
Composite Cement Retainer and
CT Tension Set Service Packer.....................................................�� 20
Set-N-Squeeze Hydraulic Setting Tool...................................... 55
N Full-Bore Tubing Tester..............................................................� 21
Drillable Bridge Plugs.....................................................................43
R-2 Upstrain Unloading Sub.........................................................� 21
Drillable Cement Retainers............................................................ 54
Tension Set Service Packers and Accessories................................19
Element Selection for K-1 Cement Retainers...............................� 56
v
Alphabetical Product Index
H-1 Tubing Size Cement Retainer....................................................57
D Tubing Swivel..............................................................................75
HMN Bridge Plug............................................................................52
DB Tubing Anchor Catcher..............................................................72
K-1 Cement Retainer.......................................................................56
Depck Tubing Bailer.........................................................................71
N, N-2 and N-3 Tubing Size Bridge Plugs.......................................51
Double-Box Tubing Hanger Bushing...............................................74
N Tubing Size Cement Retainer......................................................58
E Swivel-Type Testing Manifold.....................................................75
N-1 Bridge Plug...............................................................................50
General Remedial Equipment and Accessories..............................69
NC-1 Bridge Plug.............................................................................50
Grabitz Magnets...........................................................................� 77
Offshore Drillables Basket..............................................................59
Multi-Task Wellbore Filter............................................................� 79
Packing Element Selection for
Multi-Valve Cementing Manifolds..................................................76
N-1, TV-10, S and NC-1 Bridge Plugs........................................50
Pressure Relief Sub for Pumping Wells.......................................... 74
QUIK Drill Composite Plug Portfolio.............................................� 44
Pump Type Tubing Bailer.................................................................71
QUIK Drill Reference Guide..........................................................� 45
Shear Type Circulation Valve and Swivel....................................... 80
TV-10 Bridge Plug.........................................................................�� 49
Standard VACS System................................................................�� 85
Typical Application for the
ULTRA-CLEAN Brush Tool...............................................................83
QUIK Drill Composite Frac Plug................................................. 47
Typical Application for the
ULTRA-CLEAN Casing Scraper........................................................82
Wellbore Test Packer......................................................................84
QUIK Drill Composite Bridge Plug............................................. 48
Inflatable (PIP™) Systems
Setting Tools, Stinger Subs and Wireline
Products and Applications............................................87–113
B Snap-Latch Stinger Sub...............................................................66
C Wireline Jar................................................................................. 67
PIP Inflatable Elements
CT Hydraulic Setting Tool................................................................ 63
PIP Inflatable Element Rating Table..............................................� 88
E-4 HPHT, Size 10............................................................................65
PIPDESIGN................................................................................�������� 89
E-4 Wireline Pressure Setting Assembly,
Production Injection Packer (PIP) Inflatable Elements....................87
Sizes 05,10 and 20.............................................����������������������� 64
E-5 Wireline Pressure Setting Assembly, Size 05.......................... 64
Blue Whale ISP
H Wireline Feeler and Junk Catcher................................................67
Blue Whale Inflatable Service Packer (ISP)....................................91
J Hydraulic Setting Tool.................................................................. 62
Blue Whale ISP Sample Applications............................................95
K-1 Snap-Latch Setting Tool...........................................................62
Blue Whale Permanent Bridge Plug............................................�� 94
KL Control Unit................................................................................66
Blue Whale Retrievable Bridge Plug with
R Wireline Feeler and Junk Catcher...............................................67
GT Unloader Assembly and LT Retrieving Head........................93
Setting Tools, Stinger Subs and Wireline Accessories..................61
Resettable Blue Whale...................................................................92
General Remedial Equipment and Accessories
PIP Packers
A-2 Sand-Line Drill........................................................................� 70
Hyper Inflatable Service Packer (ISP)............................................� 99
B-1 Center-Type Testing Manifold..................................................75
Resettable (RS) PIP.......................................................................... 98
B-2 and B-3 Tubing Anchor Catchers.............................................. 72
Single Set PIP/Resettable.............................................................� 97
BOP Jet Sub....................................................................................81
Single Set (SS) PIP...........................................................................98
Clean Bore Riser Brush and Boot Basket........................................78
Surface Control Inflated (SCI) PIP.................................................. 100
D Testing Manifold........................................................................� 75
vi
Alphabetical Product Index
PIP Bridge Plugs
PIP Options
Permanent Inflatable Bridge Plug................................................. 101
Delayed Opening Valve..................................................................111
Element Latch System (ELS).........................................................113
Non-Rotating Tailpipe...................................................................112
Pull Release Subassembly............................................................111
Shear Pinned Bottom Sub.............................................................112
Permanent Inflatable Bridge Plug (PIBP)....................................... 102
Production Injection Packer........................................................... 101
PIP ISAP
PIP Inflatable Straddle Acidizing Packer........................................104
PIP Inflatable Straddle Acidizing Packer (ISAP)............................ 103
PIP Assemblies
PIP Cement Retainer....................................................................��105
SS PIP Straddle Hookup................................................................105
Drillstem Test Tools...........................................................116–118
Drillstem Test Tools
Conventional Drillstem Test Tool (DST).......................................�116
Environmental Surface Controlled Completion System............���118
Inflatable Drillstem Test Tool (DST)..............................................116
J Environmental Test Tool...........................................................��117
Snap-Latch Treat and Test Tool.....................................................117
PIP Accessories
B Bar/Ball Actuated Circulating Sleeve........................................109
Fill-Up Sub...............................................................................������107
Fill-Up Valve.................................................................................. 107
Hydraulic Release Running Tool (HRRT)....................................... 108
J Circulating Valve.........................................................................109
On-Off Connectors (High Performance Series)..............................108
P Pressure-Actuated Circulating Sleeve....................................... 109
PIP Cement Retainer Kit.............................................................���110
vii
viii
Product Number Index
Product
Family No.
Description
H13014
Clean Bore Riser Brush and
Page
Boot Basket...............................................78
Product
Family No.
Description
H32901
Snap-Latch Treat and Test Tool.....................117
H32911
PIP™ Inflatable Straddle
Page
H13015
.Multi-Task Wellbore Filter™............................. 79
H13101
Grabitz Magnets............................................77
H40007
B-1 Tubing Size Cement Retainer................� 57
H13125
.Standard VACS System................................. 85
H40011
H-1™ Tubing Size Cement Retainer................� 57
H14046
Shear Type Circulation Valve and Swivel........80
H40021
K-1™ Cement Retainer
H14068
.BOP Jet Sub.....................................................81
H16107
ULTRA-CLEAN Casing Scraper.....................� 82
H40023
K-1 Cement Retainer (Wireline Set).............56
H16108
.ULTRA-CLEAN Brush Tool..............................83
H40024
Big Bore Cement Retainers.............................58
H30001
Single Set (SS) PIP .........................................98
H40026
N™ Tubing Size Cement Retainer....................58
H30002
Resettable (RS) PIP™........................................98
H40060
Composite Cement Retainer and
H30010
Surface Control Inflated (SCI) PIP ................ 100
and H40040
H30025
Hydraulic Release
H40062
CT Hydraulic Setting Tool.............................. 63
Running Tool (HRRT)................................108
H40069
K-1™ Snap-Latch Setting Tool........................� 62
H30043
Element Latch System (ELS)..........................113
H40092
B™ Snap-Latch Stinger Sub.............................66
H30045
Blue Whale™ Inflatable
H40103
N™, N-2™ and N-3™ Tubing Size
™
™
™
™
™
™
Service Packer (ISP).................................. 91
Acidizing Packer...................................... 104
™
(Mechanical Set)....................................... 56
™
Set-N-Squeeze Hydraulic Setting Tool......... 55
™
and H40115
Bridge Plugs...............................................51
H30045,
Blue Whale Retrievable Bridge Plug
H40120
N-1™ Bridge Plug (Wireline Set)......................50
H30046
with GT™ Unloader Assembly and
H40121
NC-1™ Bridge Plug (Wireline Set)....................50
and H67778.
LT™ Retrieving Head..................................93
H40122
N-1™ Bridge Plug (Mechanical Set).................50
H30047
Resettable Blue Whale™.................................92
H40123
NC-1™ Bridge Plug (Mechanical Set)..............50
H30048
Blue Whale™ Permanent Bridge Plug.............94
H40133
HMN™ Bridge Plug...........................................52
H30050
J™ Circulating Valve.......................................109
H40183
TV-10™ Bridge Plug..........................................49
H30055
Pressure Relief Sub for Pumping Wells.......... 74
H40705
EA™ Retrievamatic Service Packer...................� 2
H30055
B™ Bar/Ball Actuated Circulating Sleeve...... 109
H40709
B™ Retrievamatic Service Packer.....................12
H30055
P™ Pressure-Actuated
H40710
Heavy Duty Retrievamatic Service Packer.......� 4
Circulating Sleeve...................................109
H40712
Big Bore Retrievamatic Service Packer.............4
H30073
Permanent Inflatable Bridge Plug (PIBP)........102
H40714
J™ Retrievamatic Service Packer.....................13
H30074
Hyper™ Inflatable Service Packer (ISP)............ 99
H40715
Retrievamatic II™ Service Packer
H30087
PIP™ Cement Retainer Kit.............................. 110
H30098
Fill-Up Sub.....................................................107
H40718
L Retrievamatic Service Packer......................13
H30201
Conventional Drillstem Test Tool (DST)........�� 116
H40719
Retrievamatic II™ Service Packer
H30240
Inflatable Drillstem Test Tool (DST)..............116
H30304
Fill-Up Valve...................................................107
H40720
RC-2™ Hydro-Grip Cementer..............................2
H32001
J™ Environmental Test Tool........................... 117
H40723
Wellbore Test Packer...................................... 84
H32003
Environmental Surface Controlled
H40790
Rotational Equalizing Sub with
™
Completion System................................118
(Rocker Slips)...............................................3
™
(Dovetail Slips)............................................3
ASAP™ Blanking Plug................................17
ix
Product Number Index
Product
Family No.
Description
Product
Family No.
Description
H41001
C-1™ and C-2™ Full-Bore Service Packer.......... 20
H67234
E™ Tubing Control Valve.....................................8
H41004
CT™ Tension Set Service Packer......................20
H67505
R-2™ Upstrain Unloading Sub..........................21
H43061
KL™ Control Unit..............................................66
H67508
F™ Circulating Sub ............................................. 9
H43702
E-4™ Wireline Pressure Setting
H67701
C™ Retrievable Bridge Plug ............................. 24
Assembly, Sizes 05, 10 and 20.................64
H67732
Wireline Set Retrievable Bridge Plug.............29
H43704
E-4 HPHT, Size 10 .......................................... 65
H67734
G™ LOK-SET™ Retrievable Bridge Plugs ........� 27
H43705
E-5™ Wireline Pressure Setting
H67737
GT™ LOK-SET™ Retrievable Bridge Plug ......... 26
Assembly, Size 05.....................................64
H67739
WG™ Retrievable Bridge Plug..........................28
H43719
J™ Hydraulic Setting Tool................................62
H67740
GTV™ LOK-SET™ Retrievable Bridge Plug........25
H43901
H™ Wireline Feeler and Junk Catcher............� 67
H67771
H™ Washover-Type Retrieving Head..............� 24
H43907
R™ Wireline Feeler and Junk Catcher.............67
H67775
L™ LOK-SET™ Retrieving Head.........................27
H43944
C™ Wireline Jar................................................67
H67776
M™ Retrieving Head........................................29
H44135
Twin-Thread Safety Joint................................17
H67776
MWG™ Retrieving Head..................................28
H44190
Safety Joint Overshot......................................17
H67778
LT-CT™ LOK-SET™ Retrieving Head..................26
H44194
ASAP™ Surface Isolation System.....................16
H67794
Sealer Ball Catcher
H44194
Hydraulic Disconnect.......................................15
H44194
Retrievable Tool......................................�������� 15
H47016
E™ Circulating Washer with
Page
™
Model A Sliding Sleeve Valve................39
C Packing Element
H67795
Sealer Ball Catcher (for the G™ LOK-SET™ H68420, H68421, On-Off Connectors
H68422, H68423,.
™
Circulating Washer...................................37
x
(for C™ Retrievable Bridge Plug)...............24
Retrievable Bridge Plug)...........................26
™
H47042
Page
(High Performance Series)......................108
H68424, H68426
H47043
Service Adaptable Packer-SAP Tool.............. 36
and H68427
H47052
Model A Set-Down Anchor...........................38
H69803
H47056
HD™ Set-Down Anchor....................................38
and H69804
H59801
D Tubing Swivel.............................................75
H69805
DB Tubing Anchor Catcher.............................72
H59810
Double-Box Tubing Hanger Bushing.............�� 74
H71402
F™ Test and Stimulation Valve...........................8
H59833
B-1™ Center-Type Testing Manifold...............� 75
H71404
D™ Surge Valve System.....................................9
H59835
D™ Testing Manifold........................................ 75
and H71403
H59841
E Swivel-Type Testing Manifold....................75
H71409
Model A™ Dual Surge Valve System.................9
H59904
Model A™ Back-Pressure Valve.........................8
H71410
Pressure-Actuated Stimulation Valve...............8
H59951
A-1 Mechanical Collar Locator........................ 41
H71425
Injection Control Valve (ICV)............................40
H66511
D-1 and D-2 Latching-Type Packer Plugs.......32
H71427
Unloading Injection Control Valve (UICV)........41
H66512
F Latching-Type Packer Plug..........................32
H71431
C™ Injection Control Valve (ICV).......................40
H66518
FT™ Latching-Type Packer Plug........................ 32
H71440
Mechanical Injection Control Valve................36
H67103
P-2 Set-Down Unloading Sub..........................3
H74741
A-2™ Sand-Line Drill........................................70
H67201
N™ Full-Bore Tubing Tester................�������������� 21
H74749
Depck Tubing Bailer.........................................71
H67205
S Full-Bore Tubing Tester................................. 2
H74750
Pump Type Tubing Bailer.................................71
™
™
™
™
™
™
™
™
™
B-2™ and B-3™ Tubing
Anchor Catchers........................................72
™
Compression Set
Service Packers
Compression Set Service
Packers and Accessories
Workstring
S™ Tubing Tester
P-2™ Set-Down Unloader
The workover systems line of compression set service packers
have been field-proven to be the best tools in the industry. the
retrievamatic style service packers have been proven in worldwide
applications which call for any type of squeeze cementing
operations, casing testing, formation fracturing, and high-pressure
acidizing with subsequent testing. The retrievamatic style service
packers are full-opening, set-down squeeze packers with piston
type hold-down buttons, a three section packing element system,
and rocker-type lower slips. Dovetail-type slips are also available on
some models. The high performance capabilities of the retrievamatic
type packers make them ideal for many types of pressure pumping
and surface isolation operations.
The compression set service packers have available an array of
accessories to aid in field operations. The entire line of compression
set packer accessories is designed for maximum performance to
compliment the full range of available compression service packers.
Retrievamatic Style
Service Packer
1
Compression Set
Service Packers
EA Retrievamatic Service Packer
Product Family No. H40705
APPLICATION
The industry’s most popular and proven retrievable stimulation and workover packer,
the EA™ retrievamatic is used in all types of squeeze cementing, casing testing,
formation fracturing, and high-pressure acidizing with subsequent testing. It is a fullopening, set-down packer with piston-type hold-down buttons, actuated by pressure
from below and a three-section packing element system.
Features/Benefits
„„Large
bypass area permits circulation around and through the tool
while running in; straight pickup equalizes pressure across hold-down
buttons instantly
„„Proven face-seal unloader controls the bypass, eliminating the need for
mechanical locks and rotation
„„Bypass running completely through the packer isolates buttons from tubing
pressure surges, reducing chance of dulling
„„Hold-down buttons maintain packoff during high-pressure operations
from below
„„Proven packing element system
„„Rocker slips set with only 3/4 turn, straight pickup to retrieve
RC-2 Hydro-Grip Cementer
Product Family No. H40720
APPLICATION
The RC-2™ hydro-grip cementer is a set-down packer with hydraulic hold-down pistons.
The packer has moderate pressure capabilities suitable for most acidizing, fracturing,
and squeeze operations. The packer sets with right-hand rotation and set-down weight.
Features/Benefits
„„Large
bypass area permits circulation both through and around the tool
during run-in
„„Hydraulic hold-down buttons help to hold packer when pressuring from below
S Full-Bore Tubing Tester
Product Family No. H67205
APPLICATION
Designed for use with the retrievamatic type service packer, the S™ full-bore tubing
tester is used to pressure test the tubing string for leaks.
2
ea Retrievamatic
Service packer
Product Family No. H40705
S full-Bore
tubing tester
Product Family No. H67205
Compression Set
Service Packers
P-2 Set-Down Unloading Sub
Product Family No. H67103
APPLICATION
The P-2™ set-down unloading sub is used to equalize tubing annulus pressure when
using a set-down packer. A face-type seal prevents communication between the
tubing and annulus when the sub is in the closed position; the sub is held open
or closed by collet fingers. Since the sub is essentially pressure balanced, normal
set-down weight required for operation of the tool run below the sub is sufficient to
maintain closed position when run with the proper size tubing.
Retrievamatic II Service Packer
Product Family No. H40715 (Rocker Slips)
Product Family No. H40719 (Dovetail Slips)
APPLICATION
The Retrievamatic II™ is a compression set, retrievable service packer used for
remedial applications where the EA™ retrievamatic service packer is often used.
These applications may include squeeze cementing, casing testing, formation
fracturing and high-pressure acidizing.
The Retrievamatic II retains the industry proven features and advantages of the
EA Retrievamatic while incorporating design improvements which will enhance the
performance of the packer while lowering the maintenance costs of the tool. Like
the EA Retrievamatic, the Retrievamatic II is a full-opening packer with piston-type
hold-down buttons actuated by pressure from below and a three-section packing
element system.
Companion tools such as the S™ tubing tester (product family no. H67205) will be the
same as those used with the EA Retrievamatic service packer.
p-2 Set-down
unloading Sub
Product Family
No. H67103
Features/Benefits
„„Retains
the same features/benefits as the EA Retrievamatic including
a cocentric internal bypass, face-seal unloader, hydraulic hold-down
buttons, and three-section packing element system
„„Dovetail or rocker type slip designs available according to job requirements
„„Interchangeable parts with the SAP™ tool minimizing spare parts inventory
„„Square shaped key/keyway replaces the dovetail key design increasing
life of the mandrel and reduces jamming and breaking of keys
„„Buttress profile grooves on the control segment and body increase
the life of the body and control segment
„„Conversion to right-hand or left-hand set possible without additional
parts or disassembly of the entire tool
„„Heavy duty unloader and body for use as a hurricane plug
Retrievamatic ii
with dovetail Slips
Product Family
No. H40719
Retrievamatic ii
with Rocker Slips
Product Family No. H40715
3
Compression Set
Service Packers
Heavy Duty Retrievamatic
Service Packer
Product Family No. H40710
APPLICATION
The Heavy Duty Retrievamatic™ service packer
is a high-pressure version of the standard size
43 EA™ Retrievamatic service packer. The heavy
duty service packer is run, set and released in the
same manner as the standard Retrievamatic service
packer and incorporates many of the features of
the EA and Retrievamatic II™.
The heavy duty comes standard with dovetail type
slip configuration and offers the features of a fullopening, compression set packer with button-type
hold-downs and built-in unloader seal.
The setting mechanism of the heavy duty allows
the tool to be easily converted from right-hand to
left-hand set (and vice versa) without the need for
additional parts.
The heavy duty has some unique design features for
high-pressure applications.
The heavy duty is only available in size 43
(see specification guide matrix on page 5).
Big Bore Retrievamatic
Service Packer
Product Family No. H40712
APPLICATION
The Big Bore Retrievamatic service packer is a
specially designed version of the standard size
45 EA Retrievamatic service packer.
The Big Bore has some of the same features of
both the EA and Retrievamatic II service packers.
The Big Bore comes standard with the dovetail
slip configuration. The dovetail slips of the
Big Bore retract below the OD of the tool in the
unset position reducing the possibility of the slips
“hanging up” during run-in.
The setting mechanism of the Big Bore allows
the tool to be easily converted from right-hand to
left-hand set (and vice versa) without the need for
additional parts.
In straddle operations, the ideal companion tool for
use with the Big Bore is the C™ retrievable bridge
plug for shallow applications and the
G™ or GT™ LOK-SET™ retrievable bridge plug for
deeper or more severe applications.
The Big Bore is only available in size 45
(see specification guide matrix on page 5).
Features/Benefits
„„Full opening with 2-3/8-in. ID
„„Trapped collet allows tool to be set and
packed off before unloader is closed and
holds the unloader open when circulating
until set-down weight is again applied
„„Releases easily and dependably and
equalizes completely through the tool with
straight pickup
„„Face seal unloader permits circulation
completely around tool
The Big Bore has a larger ID to permit the passage of
running downhole gauges or perforating guns and to
accommodate high fluid flow rates during stimulation
treatments. The Big Bore offers the features of a fullopening, compression set packer with button-type
hold-downs and built-in unloader seal.
Heavy duty Retrievamatic
Service packer
Product Family No. H40710
4
Compression Set
Service Packers
Specification Guide
Compression Set Service Packers
RC-2™ Hydro-Grip
(Product Family No. H40720)
Casing
OD
Weight (Nominal)
in.
mm
lb/ft
kg/m
2-3/8
2-7/8
60.3
73.0
4.6-3.8
6.4-6.5
6.8-5.7
9.5-9.7
2-7/8
73.0
6.4-6.5
9.5-9.7
2-7/8
2-7/8
3-1/2
3-1/2
3-1/2
4
4-1/2
4-1/2
4-1/2
5
5
5
5-1/2
5-1/2
5-1/2
73.0
73.0
88.9
88.9
88.9
101.6
114.3
114.3
114.3
127.0
127.0
127.0
139.7
139.7
139.7
4.7-5.6
4.36
10.2
7.7-9.2
5.75
9.5-11.6
15.1
9.5-13.5
9.5-10.5
20.3-20.8
15-18
11.5-15 X
26
14-28.4 l
14-26 l
7.0-8.3
6.5
15.2
11.5-13.7
8.6
14.1-17.3
22.5
14.1-20.1
14.1-15.6
30.2-31.0
22.3-26.8
17.1-22.4
38.7
20.8-42.3
20.8-38.7
N/A
28A
28A
Hi-Temp
28B
28C
35A
35B
35C
41A
41B
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
14-23 l
20.8-34.2
20.8-25.3
25.4-29.8
29.8-34.2
29.8-34.2
23.1-29.8
19.3-23.1
33.5
38.7
29.8-34.2
22.3-26.8
50.6
41.7-47.6
35.7-43.2
35.7
56.5
25.3-29.8
47.6-52.1
38.7-43.2
29.8-38.7
25.3-29.8
50.1-58.0
35.7-44.2
29.8-35.7
65.5-72.9
47.6-57.9
29.8-40.5
69.9-79.6
57.9-69.9
43.6-53.6
97.8-120.5
82.6-90.3
67.7-75.9
48.7-60.3
96.7-119.8
56.5-89.3
114.6-151.8
71.4-107.1
5-1/2 139.7
5-1/2
5-1/2
5-1/2
5-1/2
5-1/2
5-1/2
5-3/4
6
6
6
6-5/8
6-5/8
6-5/8
6-5/8
7
6-5/8
7
7
7
7
7-5/8
7-5/8
7-5/8
8-5/8
8-5/8
8-5/8
9-5/8
9-5/8
9-5/8
10-3/4
10-3/4
10-3/4
10-3/4
11-3/4
11-3/4
13-3/8
13-3/8
X
l
139.7 14-17 l
139.7
17-20
139.7
20-23
139.7
20-23
139.7 15.5-20 X
139.7
13-15.5
146.1
22.5
152.4
26
152.4
20-23
152.4
15-18
168.3
34
168.3
28-32
168.3
24-29
168.3
24
177.8
38
168.3
17-20
177.9
32-35
177.9
26-29
177.9 20-26 X
177.9
17-20
193.7
33.7-39
193.7
24-29.7
193.7
20-24
219.1
44-49
219.1
32-40
219.1
20-28
244.5
47-53.5
244.5
40-47
244.5
29.3-36
273.1
65.7-81
273.1 55.5-60.7
273.1
45.5-51
273.1 32.75-40.5
298.5
65-80.5
298.5
38-60
337.7
77-102
337.7
48-72
Gauge
Ring OD
Tool
Size
in.
Tool ID
mm
in.
Retrievamatic II™
(Product Family Nos.
H40715 and H40719)
EA™ Retrievamatic
(Product Family No. H40705)
Tool
Size
mm
Gauge
Ring OD
Tool ID
in.
mm
in.
mm
N/A N/A N/A N/A N/A
2.234 56.7 0.750 19.1 N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
2.330 59.2 0.750 19.1 N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
-
2.357
2.436
2.782
2.844
3.038
3.303
3.620
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
59.9
61.9
70.7
72.2
77.2
83.9
91.5
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
0.750
0.750
1.375
1.375
1.375
1.500
1.500
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
19.1
19.1
34.9
34.9
34.9
38.1
38.1
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
43A
43A
43B
43C
43C
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
3.771 95.8
3.771 95.8
N/A
4.125 104.8
4.250 108.0
4.250 108.0
4.641
4.406
4.500
4.641
4.781
4.781
4.781
5.062
5.156
5.406
5.484
5.625
5.656
5.656
5.812
5.812
5.968
6.078
6.266
6.453
6.672
6.812
7.312
7.531
7.781
8.218
8.437
8.593
9.000
9.375
9.625
9.625
10.125
10.250
11.625
12.125
117.9
111.9
114.3
117.9
121.4
121.4
121.4
128.6
131.0
137.3
139.3
142.9
143.7
143.7
147.6
147.6
151.6
154.4
159.2
163.9
169.5
173.0
185.7
191.3
197.6
208.7
214.3
218.3
228.6
238.1
244.5
244.5
257.2
260.4
295.3
308.0
Gauge
Ring OD
Tool ID
in.
mm
in.
mm
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
-
N/A
N/A
N/A
N/A
N/A
N/A
43A2
43A4
43B
43B
43C
43C
44A
44B
N/A
N/A
N/A
N/A
N/A
N/A
3.771
4.000
4.125
4.125
4.250
4.250
4.250
4.360
N/A
N/A
N/A
N/A
N/A
N/A
95.8
101.6
104.8
104.8
107.9
107.9
107.9
110.7
N/A
N/A
N/A
N/A
N/A
N/A
1.813
1.813
1.813
1.813
1.813
1.813
1.813
1.813
44C
4.485 113.9 1.813 46.1
1.813 46.1
or
or
1.960 49.8
44D
45A4
45A2
45A2
45A4
45B
45B
45B
45C
45D
45E2
45E4
45F
47A2
47A2
47A4
47A4
47B2
47B4
47C2
47C4
47D2
47D4
49A2
49A4
49B
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
4.700
4.614
4.500
4.500
4.614
4.781
4.781
4.781
5.062
5.156
5.406
5.484
5.625
5.656
5.656
5.812
5.812
5.968
6.078
6.266
6.453
6.672
6.812
7.312
7.531
7.781
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Consult Casing IDs
and Setting Ranges
in Tech Units
45A4
44
45A2
45A4
45B
45B
45B
45C
45D
45E2
45E4
45F
47A2
47A2
47A4
47A4
47B2
47B4
47C2
47C4
47D2
47D4
49A2
49A4
49B
51A2
51A4
51B
53A2
53A4
53A6
53B
54A
54B
55A
55B
Tool
Size
Heavy-Duty Retrievamatic
(Product Family No. H40710)
2.416 61.4
or
or
2.286 58.1
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
76.2
76.2
76.2
76.2
76.2
76.2
76.2
76.2
76.2
76.2
76.2
76.2
76.2
76.2
119.4
117.9
114.3
114.3
117.9
121.4
121.4
121.4
128.6
130.9
137.3
139.3
142.9
143.7
143.7
147.6
147.6
151.6
154.4
159.2
163.9
169.5
173.0
185.7
191.3
197.6
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
1.813
1.813
1.813
1.813
1.813
1.813
1.813
1.813
1.813
1.813
1.813
1.813
1.813
2.418
2.418
2.418
2.418
2.418
2.418
2.418
2.418
2.418
2.418
2.980
2.980
2.980
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Gauge
Ring OD
Tool
Size
Tool ID
in.
mm
in.
mm
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
46.1
46.1
46.1
46.1
46.1
46.1
46.1
46.1
N/A
N/A
N/A
N/A
N/A
N/A
43A2
43A2
43A4
43B
43C
43C
46.1
46.1
46.1
46.1
46.1
46.1
46.1
46.1
46.1
46.1
46.1
46.1
46.1
61.4
61.4
61.4
61.4
61.4
61.4
61.4
61.4
61.4
61.4
75.7
75.7
75.7
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A N/A N/A N/A
N/A N/A N/A N/A
N/A N/A N/A N/A
N/A N/A N/A N/A
N/A N/A N/A N/A
N/A N/A N/A N/A
3.771 95.8 1.813 46.1
3.771 95.8 1.813 46.1
4.000 101.6 1.813 46.1
4.125 104.8 1.813 46.1
4.250 107.9 1.813 46.1
4.250 107.9 1.813 46.1
Big Bore Retrievamatic
(Product Family No. H40712)
Gauge
Tool
Tool
Ring OD
ID
Size
in.
mm
in. mm
45A4 4.641 117.9 2.375 60.3
45A2 4.500 114.3 2.375 60.3
45A2 4.500 114.3 2.375 60.3
45A4 4.641 117.9 2.375 60.3
45B 4.781 121.4 2.375 60.3
45B 4.781 121.4 2.375 60.3
45B 4.781 121.4 2.375 60.3
45C 5.062 128.6 2.375 60.3
45D 5.156 130.9 2.375 60.3
45E2 5.406 137.3 2.375 60.3
45E4 5.484 139.3 2.375 60.3
45F 5.625 142.9 2.375 60.3
N/A 60.3
N/A N/A
N/A N/A N/A N/A N/A
N/A N/A N/A N/A N/A
N/A N/A N/A N/A N/A
N/A N/A N/A N/A N/A
N/A N/A N/A N/A N/A
N/A N/A N/A N/A N/A
N/A N/A N/A N/A N/A
N/A N/A N/A N/A N/A
N/A N/A N/A N/A N/A
N/A N/A N/A N/A N/A
N/A N/A N/A N/A N/A
N/A N/A N/A N/A N/A
N/A N/A N/A N/A N/A
N/A N/A N/A N/A N/A
N/A N/A N/A N/A N/A
N/A N/A N/A N/A N/A
N/A N/A N/A N/A N/A
N/A N/A N/A N/A N/A
N/A N/A N/A N/A N/A
N/A N/A N/A N/A N/A
N/A N/A N/A N/A N/A
N/A N/A N/A N/A N/A
N/A N/A N/A N/A N/A
This size may be set in this weight casing in certain circumstances such as mixed strings or unusual hole conditions. However, the other size listed for this weight is
recommended and should be run where possible.
The Retrievamatic II, size 44 with dovetail type slips must be used to set in 5-1/2-in. (139.7 mm) 14 lb/ft (20.8 kg/m) casing.
5
6
Control Valves/
Surge Valves
Tubing
Tubing
Model A™ Upper
Surge Valve
Control Valves
Control valves are various accessory tools which have
functions such as controlling flowback in the workstring
while running and pulling a retrievable service packer
assembly from the well, controlling tubing to annular
flow for circulating and equalizing purposes and for
shut-in isolation below a retrievable service packer.
Surge Valves
F™ Test and
Stimulation Valve
Tubing
(Atmospheric
Chamber)
Surge valves are mechanical and pressure activated
accessory tools used to create an under-balance below
a retrievable service packer. Typically two surge valves
are run in tandem above the retrievable service packer
spaced to create an atmospheric chamber between the
valves. The surge valves are activated independently.
The lower valve is activated to create an instantaneous
surge on the perforations for debris and emulsion
cleanup. The debris is allowed to settle, then the upper
valve is activated to allow flow to surface.
Pressure-Activated
Stimulation Valve
Retrievamatic-Style
Service Packer
Retrievamatic-Style
Service Packer
7
Control Valves/
Surge Valves
Model A BackPressure Valve
Product Family No. H59904
APPLICATION
The Model A™ back-pressure valve provides
a means of controlling backflow when either
running or pulling a run-in string. Depending
on the fluid in the wellbore, a fire and safety
hazard is eliminated.
Its primary application is in conjunction with
a full-bore retrievable service packer and a
retrievable bridge plug, or a retrievamatic
style service packer and a retrievable bridge
plug, to control backflow when moving from
a treated zone to straddle a new zone. The
flapper valve can be locked in the open
position for swab or flow testing.
F Test and
Stimulation Valve
Product Family No. H71402
APPLICATION
The F™ test and stimulation valve is a
rotationally actuated, quick-opening, fullbore valve. It is used in conjunction with a
retrievamatic service packer, for the purpose
of creating sudden, high-velocity flow from
the formation through the perforations into
the tubing. Plugged perforations are cleared
and blocking agents in the vicinity of the
wellbore are removed.
The valve is also applicable in:
E Tubing Control Valve
Product Family No. H67234
APPLICATION
The E ™ tubing control valve is a full-opening
valve that can be used above a retrievamatic
service packer to isolate a zone from the
tubing hydrostatic after squeeze cementing
in a low-fluid-level well. Valve opening is
accomplished with right-hand rotation, with
six and one-half turns at the tool, moving the
valve from fully closed to fully open position.
Opening or closing can be repeated as often
as desired. The valve can also be used as
a control valve to prevent flowback while
running, moving, or retrieving downhole tools
Pressure-Actuated
Stimulation Valve
Product Family No. H71410
APPLICATION
The pressure-actuated stimulation valve is
a test and stimulation valve that is actuated
by pressure applied to the annulus. This
feature makes it especially applicable
to operations involving deep or deviated
holes where rotation of the tubing or
drillpipe proves difficult. It can be used
for any operation in which the F test and
stimulation valve is used, provided it is
possible to pressure the annulus. Tool
actuation is effected by pressuring the
annulus to 1,000 psi (70.31 kg/cm2). It is
the lower valve in the Model A dual surge
system (product family no. H71409).
model a Backpressure Valve
Product Family
No. H59904
e tubing
control Valve
Product Family
No. H67234
f test and
Stimulation Valve
Product Family
No. H71402
pressure-actuated
Stimulation Valve
Product Family
No. H71410
Dry testing of perforated intervals that
have been cemented off
„ Lowering injection pressures in water
injection wells by clearing blocked flow
passages and perforations
„„Removal of mud filtrate prior to an
acidizing job
„„Testing of a zone without
swabbing operations
„
8
Control Valves/
Surge Valves
D Surge Valve System
F Circulating Sub
Product Family Nos. H71404 and H71403
Product Family No. H67508
APPLICATION
The D™ surge valve system consists of the
D annulus activated surge valve (product
family no. H71404) run as the lower valve
and the D tubing activated surge valve
(product family no. H71403) run as the
upper valve.
APPLICATION
The F™ circulating sub provides a means of
pumping open drain or circulation ports in
the tubing by dropping a ball from surface.
The sleeve valve is pressure balanced with
a variable shear value. The F circulating sub
is available in sizes 2-3/8-in. and 2-7/8-in.
The valves are run in the closed position
with an atmospheric chamber between
them. The D surge valve system is run
on top of the retrievamatic style service
packer which is set above an interval of
perforations. When pressure is applied
to the annulus, a cutter is activated in
the D annulus activated surge valve that
breaks a glass disk. The pressure at the
perforations is dropped and the surge
from the formation cleans out debris. The
surge is safely contained in the D tubing
activated surge valve. After surging, tubing
pressure is applied to actuate the cutter
in the D tubing activated surge valve that
breaks the glass disk allowing the tubing
to be safely circulated.
Model A Dual Surge
Valve System
Features/Benefits
„„Surge
is safely contained
in tubing
„„High-pressure glass disks
„„No rotation required
„„Full opening
Product Family No. H71409
APPLICATION
The Model A™ dual surge valve system
consists of the Model A upper surge
valve (product family no. H71419) spaced
above the pressure-actuated stimulation
valve (product family no. H71410). Both of
the valves are run in the closed position,
creating an atmospheric chamber between
them. The Model A dual surge valve system
is run on top of the retrievamatic service
packer that is set above perforations.
The pressure-actuated stimulation valve is
opened by applied pressure to the annulus.
The pressure at the perforations is dropped
and the surge from the formation cleans
out debris. The Model A upper surge valve
safely contains the surge and allows
circulation and can be opened by applied
tubing pressure which will lock the valve in
the open position.
f circulating Sub
Product Family
No. H67508
Features/Benefits
„„Surge
is safely contained
in tubing
„„No rotation required
„„Valves opened by applied
annulus and tubing pressure
d Surge Valve System
Product Family Nos.
H71403 and H71404
model a dual Surge Valve System
with ea Retrievamatic
Product Family No. H71409
9
10
Heavy Duty Compression
Set Service Packers
Heavy Duty Compression Set Service Packers
The highly successful and versatile line of heavy duty compression
set service packers can be used as hurricane plugs or can be run in
a liner hanger hookup for one-trip liner top testing and squeezing.
The hurricane plug system has proven to provide the strength and
versatility required for both emergency evacuations and surface
isolations for offshore and land operations.
Workover systems hurricane plugs are designed for emergency
evacuations in bad weather situations that force a temporary well
shutdown, catastrophic rig abandonments, and surface isolation
for BOP service repair or replacement. In the event of such an
emergency, the hurricane plug system seals off the casing string
while the workstring hangs off the bottom of the service packer.
The standard hurricane plug system consists of a twinthread safety joint for running, setting, and disconnecting; a
retrievamatic style hurricane packer and a rotational equalizing
sub with a bypass type blanking plug. This system is retrieved
using a twin-thread safety joint overshot.
The hurricane plug system is comprised of two sections. The bottom
section of the system is a retrievamatic style hurricane plug, which
is a full-opening, set-down packer with piston-type hold-down
buttons, a three-section packing element system, and rocker-type
slips. The mandrel of the packer has heavy-duty connections to
accommodate drillpipe connections on the rig floor. The packer also
has increased tensile ratings on the mandrel and unloader seal to
handle the heavy hanging loads of the drillpipe. In addition, the
hurricane plug packer is basically a retrievamatic service packer;
it can double as a squeeze tool, saving time and money since it is
already on location.
The ASAP™ system consists of the hydraulic disconnect for running,
setting, and disconnecting; a retrievamatic style hurricane packer
and a rotational equalizing sub with ASAP blanking plug.
The J™ retrievamatic service packer is ideal for one-trip liner top
testing and squeezing when running a liner. The left-hand set
version the J is compatible with all Baker Hughes mechanical and
hydraulic set liner hangers which require right-hand turns to set
or release the setting tool from the liner hanger. The mandrel ID
of the J is compatible with Baker Hughes pump down plugs. The
tensile strength of the J allows it to be run in conjunction with
Baker Hughes liner hangers and setting tools.
Drillpipe
Drillpipe
Twin-Threaded
Safety Joint
Hydraulic Disconnect
J™ Retrievamatic
Service Packer
Rotational Equalizing
Sub With FWB
Bypass Blanking Plug
Liner Setting Tool
Rotational Equalizing
Sub With ASAP™
Blanking Plug
Retrievamatic Style
Hurricane Plug/
Service Packer
Retrievamatic Style
Hurricane Plug/
Service Packer
Liner Top
Liner Packer
Liner Hanger
Standard Hurricane
plug System
aSap Hurricane
plug System
one-trip System,
J With Liner Hanger
11
Heavy Duty Compression
Set Service Packers
B Retrievamatic Service Packer
Product Family No. H40709
APPLICATION
The B™ retrievamatic service packer is suitable for multiple remedial applications.
The tool sets with right-hand or left-hand rotation depending on the applications
and accessory equipment. Packoff weight can be applied from above or by using
pipe weight from below. When used as a hurricane plug, there are multiple choices
of hookup, depending on well configuration and weather conditions.
Features/Benefits
„„Large
bypass area permits circulation around and through the tool
while running in; straight pickup equalizes pressure across holddown buttons instantly
„„Proven face-seal unloader controls the bypass, eliminating the need
for mechanical locks and rotation; the bypass, running completely
through the packer, isolates buttons from tubing pressure surges
„„Hold-down buttons maintain packoff during high-pressure operations
from below
„„Rocker slips set with only 3/4 turn; straight pickup to retrieve
B Retrievamatic/Hurricane plug
Product Family No. H40709
12
Heavy Duty Compression
Set Service Packers
J Retrievamatic Service Packer
Product Family Nos. H40714
APPLICATION
The J™ retrievamatic service packer has a J-shaped control slot in the bottom
that automatically repositions the tool to the run-in position when it is picked
up; no rotation of the tool is required to go back downhole.
The J plug is designed to be run in conjunction with hydraulic and mechanical
set liner hangers. Running the J in the string above the liner hanger allows
the liner to be set and the liner top to be tested and/or squeezed immediately
following primary cementing operations. The J is also suitable for use in
remedial applications.
L Retrievamatic Service Packer
Product Family Nos. H40718
APPLICATION
The L™ retrievamatic service packer has an L-shaped control slot in the
bottom that requires no rotation to reset when moving up hole. However, it
does require rotation to reposition it back to the run-in position. This tool is
for operations where it is desirable to be able to pick up and remain in the
“ready to set” position. The L is suitable for hurricane plug application and any
remedial operation.
Features/Benefits
„„Large
bypass area permits circulation around and through the
tool while running in; straight pickup equalizes pressure across
hold-down buttons instantly
„„Proven face-seal unloader controls the bypass, eliminating the
need for mechanical locks and rotation
„„The bypass, running completely through the packer, isolates
buttons from tubing pressure surges
„„Hold-down buttons maintain packoff during high-pressure
operations from below
J and L Retrievamatic packers
Product Family Nos. H40714 and H40718
13
Heavy Duty Compression
Set Service Packers
Specification Guide
B, J and L Retrievamatic/Hurricane Plug
B™, J™ and L™ Retrievamatic
(Product Family Nos. H40709, H40714 and H40718)
Casing
OD
Weight (Nominal)
Gauge Ring OD
in.
mm
lb/ft
kg/m
Tool
Size
in.
mm
4-1/2
114.3
9.5-13.5
14.1-20.1
43A
3.771
95.8
5
127.0
15-18
22.3-26.8
43B
4.125
104.8
5
127.0
11.5-15 X
17.1-22.3
43C
4.250
107.9
5-1/2
139.7
26
38.7
43C
4.250
107.9
5-1/2
139.7
20-23
29.8-34.2
45A2
4.500
114.3
5-1/2
139.7
15.5-20 X
23.1-29.8
45A4
4.641
117.9
5-1/2
139.7
13-15.5
19.3-23.1
45B
4.781
121.4
5-3/4
146.1
22.5
33.5
45B
4.781
121.4
6
152.4
26
38.7
45B
4.781
121.4
6
152.4
20-23
29.8-34.2
45C
5.062
128.6
6
152.4
15-18
22.3-26.8
45D
5.156
130.9
6-5/8
168.3
34
50.6
45E2
5.406
137.3
6-5/8
168.3
28-32
41.7-47.6
45E4
5.484
139.3
6-5/8
168.3
24-29
35.7-43.2
45F
5.625
142.9
6-5/8
168.3
24
35.7
47A2
5.656
143.7
7
177.8
38
56.5
47A2
5.656
143.7
6-5/8
168.3
17-20
25.3-29.8
47A4
5.812
147.6
7
177.8
32-35
47.6-52.1
47A4
5.812
147.6
7
177.8
26-29
38.7-43.2
47B2
5.968
151.6
7
177.8
20-26 X
29.8-38.7
47B4
6.078
154.4
7
177.8
17-20
25.3-29.8
47C2
6.266
159.2
7-5/8
193.7
33.7-39
50.1-58.0
47C4
6.453
163.9
7-5/8
193.7
24-29.7
35.7-44.2
47D2
6.672
169.5
7-5/8
193.7
20-24
29.8-35.7
47D4
6.812
173.0
8-5/8
219.1
44-49
65.5-72.9
49A2
7.312
185.7
8-5/8
219.1
32-40
47.6-59.5
49A4
7.531
191.3
8-5/8
219.1
20-28
29.8-41.7
49B
7.781
197.6
9-5/8
244.5
47-53.5
69.9-79.6
51A2
8.218
208.7
9-5/8
244.5
40-47
59.5-69.9
51A4
8.437
214.3
9-5/8
244.5
29.3-36
43.6-53.6
51B
8.593
218.3
10-3/4
273.1
65.7-81
97.8-120.5
53A2
9.000
228.6
10-3/4
273.1
55.5-60.7
82.6-90.3
53A4
9.375
238.1
10-3/4
273.1
45.5-51
67.7-75.9
53A6
9.625
244.5
10-3/4
273.1
32.75-40.5
48.7-60.3
53B
9.625
244.5
11-3/4
298.5
65-80.5
96.7-119.8
54A
10.125
257.1
11-3/4
298.5
38-60
56.5-89.3
54B
10.250
260.4
13-3/8
339.7
77-102
114.6-151.8
55A
11.625
295.3
13-3/8
339.7
48-72
71.4-107.1
55B
12.125
308.0
16 l
406.4
146
217.2
57A2
13.90
353.1
16 l
406.4
84
81.8-125.0
57B
14.750
374.7
X This size may be set in this weight casing in certain circumstances such as mixed strings or unusual hole conditions;
l
14
however, the other size listed for this weight is recommended and should be run where possible.
Available in J and L only.
Heavy Duty Compression
Set Service Packers
Hydraulic Disconnect
Product Family No. H44194
APPLICATION
The hydraulic disconnect provides a means for disconnecting the workstring and leaving
it in the well when surface isolation applications are required. The hydraulic disconnect
retrieving tool is used to reconnect to the workstring to retrieve it from the well after the
operation is complete. The surface isolation applications include BOP testing and repair,
emergency hurricane evacuations and short term abandonment. The hydraulic disconnect is
run in conjunction with a retrievamatic style service packer and a rotational equalizing sub
(product family no. H40790), which comprise the components of the ASAP™ system.
Ports in the bottom sub of the hydraulic disconnect allow fill-up of the workstring while
running in the hole. At setting depth, the retrievamatic service packer is set with right-hand
rotation and set-down weight. The ports in the bottom sub of the hydraulic disconnect are
closed when set-down weight is applied to set the retrievamatic. To disconnect from the
workstring, tubing pressure is applied while set-down weight is being applied, then picking
up the workstring will disconnect it. A tubing pressure drop at the surface indicates that the
workstring is free. To reconnect the workstring, simply set straight down into the disconnect.
Features/Benefits
„„One-trip, multiple shut-in, disconnect, and reconnect capability saves time and money
„„Allows easy disconnect and reconnect of the workstring utilizing the same tool
„„Ports in the hydraulic disconnect allow the workstring to fill-up while running in the hole
„„High tensile and torque ratings for offshore environments
„„Positive operation indication at surface
Retrievable tool
Product Family No. H44194
„„Separate centralizers for most casing sizes
„„Designed to transmit torque through the tool in both the setdown and pickup positions
Specification Guide
Hydraulic disconnect
Casing
OD
Tool Size
Weight
lb
kg/m
Retrievamatic
Hydraulic Disconnect
Hydraulic
Disconnect
in.
Gauge Ring OD
mm
in.
mm
7
177.8
38
56.5
47A2
3-1/2
5.656
143.7
7
177.8
32-35
47.6-52.1
47A4
3-1/2
5.968
151.6
7
7
7
7-5/8
7-5/8
7-5/8
8-5/8
8-5/8
8-5/8
9-5/8
9-5/8
9-5/8
10-3/4
10-3/4
10-3/4
10-3/4
11-3/4
11-3/4
13-3/8
13-3/8
16 X
177.8
177.8
177.8
193.7
193.7
193.7
219.1
219.1
219.1
244.5
244.5
244.5
273.1
273.1
273.1
273.1
298.5
298.5
346.1
346.1
406.4
26-29
19-26
17-19
33.7-39
24-29.7
19-24
44-49
32-40
19-28
47-53.5
40-47
29.3-36
65.7-81
55.5-60.7
45.5-51
32.8-40.5
65-80.5
38-60
77-102
48-72
146
38.7-43.2
27.5-38.7
25.3-27.5
50.1-58
35.7-44.2
27.5 -35.7
63.7-70.9
47.6-57.9
27.5-35.7
68.1-77.5
57.9-68.1
42.4-52.1
94.3-117.3
80.4-87.9
65.9-73.9
47.4-58.7
94.1-116.6
55-86.9
111.5-147.7
69.5-104.3
211.5
47B2
47B4
47C2
47C4
47D2
47D4
49A2
49A4
49B
51A2
51A4
51B
53A2
53A4
53A6
53B
54A
54B
55A
55B
57A2
3-1/2
3-1/2
3-1/2
3-1/2
3-1/2
3-1/2
3-1/2
4-1/2
4-1/2
4-1/2
4-1/2
4-1/2
4-1/2
4-1/2
4-1/2
4-1/2
4-1/2
4-1/2
4-1/2
4-1/2
4-1/2
5.968
6.078
6.266
6.453
6.672
6.812
7.312
7.531
7.781
8.218
8.437
8.596
9.000
9.375
9.625
9.625
10.125
10.250
11.625
12.125
13.900
151.6
154.4
159.2
163.9
169.5
173
185.7
191.3
197.6
208.7
214.3
218.3
228.6
238.1
244.4
244.4
257.2
260.4
295.3
308
353.1
Hydraulic disconnect
Product Family No. H44194
X This rating is the tensile load of the mandrel only. In the set
position, tailpipe weight below the mandrel transfers to the outer
components into the tie sleeve and slips. This load rating does not
apply in the set position. Please contact R&S AEG for maximum
load rating in set position.
15
Heavy Duty Compression
Set Service Packers
ASAP Surface Isolation System
Product Family No. H44194
APPLICATION
The ASAP™ system combines the Baker Hughes retrievamatic
service packer and rotational equalizing sub with a new hydraulic
disconnect tool to provide a quick, one-trip method of disconnecting
the running string while safely holding the remaining workstring
in the well. Now there is no need to pull the workstring prior to
emergency rig abandonment or temporary surface isolation.
Hydraulic Disconnect
Features/Benefits
„„One-trip
multiple, disconnect and reconnect capability
saves time and money
„„Workstring auto-fill while running in the hole
„„Hydraulic disconnect tool releases the retrievamatic service
packer and rotational equalizing sub leaving the majority of
the workstring in the hole
„„The retrievamatic service packer is the industry's most
popular and proven stimulation and service packer
Rotational Equalizing
Sub With ASAP™
Blanking Plug
Retrievamatic Style
Hurricane Plug/
Service Packer
aSap Surface isolation System
Product Family No. H44194
16
Heavy Duty Compression
Set Service Packers
Rotational Equalizing Sub With ASAP Blanking Plug
Product Family No. H40790
APPLICATION
The rotational equalizing sub is a valve used for plugging and equalizing drillpipe
or tubing above the compression set packer. The rotational equalizing sub is made
up of the packer and the hydraulic disconnect (product family no. H44194) is made
up of the rotational equalizing sub. This system allows temporary abandonment for
emergency evacuation of surface equipment isolation.
Features/Benefits
psi (689 bar) rating above and below 40°F-250°F (4.4°C-121°C)
temperature rating
„„Removable blanking plug (secondary equalization) via standard
slickline tools
„„Fully compatible with Sur-Set™ blanking plugs, (product family
no. H83620)
„„Full ID accessibility through the rotational equalizing sub after removal
of the blanking plug
„„Designed to be used with the hydraulic disconnect and a compression
set packer as part of the ASAP system
„„10,000
Rotational equalizing Sub
Product Family No. H40790
Twin-Thread Safety Joint
Product Family No. H44135
APPLICATION
The twin-thread safety joint is a right-hand release safety joint
designed to allow removal of the drillpipe or tubing from its position
above the retrievamatic/hurricane plug by right-hand rotation.
Safety Joint Overshot
Product Family No. H44190
APPLICATION
The safety joint overshot is used in conjunction with the twinthread safety joint (product family no. H44135) to allow it to be
re-engaged by right-hand rotation.
twin-thread Safety Joint
Product Family No. H44135
Safety Joint over Shot
Product Family No. H44190
17
18
Te n s i o n S e t S e r v i c e P a c k e r s
Tension Set Service Packers and Accessories
Tubing
N™ Full-Bore
Tubing Testers
The workover systems line of tension set service packers has been in the
industry for over 50 years. The field-proven design of the tension set packers
makes it an ideal tool for pressure pumping operations where conditions
are such that the amount of weight that can be applied to a set-down
packer is limited. The models available are full-opening, tension set service
packers that can be set at any depth. Although the models available are
designed primarily for applications where differential pressure is from below
the packer, the line of packers have two sets of opposed rocker-type slips
enabling it to remain packed off when subjected to pressure reversals.
The tension set service packers have available an entire line of accessories
that are designed to work with any pressure pumping operation. The
accessories that compliment the tension set service packers are designed
for maximum performance and stability during all applications.
R™ Upstrain
Unloading Sub
Full-bore Retrievable
Service Packer
19
Te n s i o n S e t S e r v i c e P a c k e r s
C-1 and C-2 Full-Bore Service Packer
Product Family No. H41001
APPLICATION
The C-1™ and C-2™ full-bore service packers are full-opening,
tension set packers used for squeeze cementing, casing testing,
formation fracturing, and high-pressure acidizing with subsequent
testing. This tool is particularly useful when set-down weight
is limited. Running with the R-2 upstrain unloading sub (product
family no. H67505) allows equalization of tubing and annulus
pressure; testing of the run-in string is possible with the N fullbore tubing tester (product family no. H67201).
Features/Benefits
„„Opposing
rocker-type slips enable the packer to remain
packed off during pressure reversals, holding against
pressure from above or below
„„Packing element allows circulation with upper slips set,
packing off when tubing is raised and tension applied
CT Tension Set Service Packer
Product Family No. H41004
APPLICATION
The CT™ tension set service packer provides a compact,
economical retrievable packer for use in situations where rotary
motion of the tubing is not possible, such as in coiled tubing
applications. The CT is a modified version of the existing AD-1™
tension packer that allows the packer to be set or released with
only axial movement (up and down) of the tubing.
The CT is short and compact and incorporates a surface coating
that reduces wear and corrosion. The CT can be dependably set
and released multiple times while in the wellbore with an easy to
operate Auto-J mechanism. The packer also has a safety release
mechanism that can be adjusted depending on the downhole
conditions and the pull capabilities of the surface equipment.
The CT is ideal for many types of remedial operations; including acid
stimulation, pressure fracturing, and secondary squeeze cementing.
c-1 full-Bore Service packer
Product Family No. H41001
20
ct tension Set Service packer
Product Family No. H41004
Te n s i o n S e t S e r v i c e P a c k e r s
R-2 Upstrain Unloading Sub
Product Family No. H67505
APPLICATION
The R-2™ upstrain unloading sub is designed to equalize tubing
and annulus pressure above the full-bore service packer. It has a
face seal unloader that closes when tension is applied and opens
with set-down weight. The unloader may be run in either the open
or closed position and then opened and closed as many times as
necessary. Torque is transmitted through the unloader by means of
a key. The unloading sub unloads pressure from either direction and
is easy to operate.
N Full-Bore Tubing Tester
Product Family No. H67201
APPLICATION
The N™ full-bore tubing tester is designed to close off the tubing
string, providing a means of testing the run-in string. It is run
above the full-bore service packer and unloader. The flapper valve
in the tester is closed with a combination of right-hand rotation
and set down.
R-2 upstrain unloading Sub
Product Family No. H67505
n full-Bore tubing tester
Product Family No. H67201
21
Te n s i o n S e t S e r v i c e P a c k e r s
Specification Guide
Tension Set Service Packers
Casing
OD
Weight T&C
kg/m
Tension
Set Packer
Type
Tension
Set Packer
Size
Gauge & Guide
Ring OD
in.
mm
lb/ft
2-7/8
73.0
6.4-6.5
9.5-9.7
Model CT
3-1/2
88.9
7.7-9.3
11.5-13.9
Model CT
4-1/2
114.3
9.5-13.5
14.2-20.7
5-1/2
139.7
15.5-20
4-1/2
114.3
5X
127.0
5X
127.0
5
127.0
15
22.3
Full-Bore
43B
4.125
104.8
5
127.0
11.5-13
17.1-19.3
Full-Bore
43C
4.250
107.9
5-1/2
139.7
20-23
29.8-34.2
Full-Bore
45A
4.500
114.3
5-1/2
139.7
15.5-17
23.1-25.3
Full-Bore
45A
4.641
117.9
5-1/2
139.7
13-15
19.3-22.3
Full-Bore
45B
4.781
121.4
5-3/4
146.1
19.5-22.5
29.0-33.5
Full-Bore
45B
4.781
121.4
Tool ID
in.
mm
in.
mm
28A
2.235
56.8
0.990
25.0
35B
2.812
71.4
0.985
25.0
Model CT
43A
3.786
96.2
1.890
48.0
23.1-29.8
Model CT
45A4
4.656
118.3
1.927
48.9
9.5-13.5
14.1-20.1
Full-Bore
43A
3.771
95.8
21 X
31.2
Full-Bore
43A
3.937
100.0
18 X
26.8
Full-Bore
43B
4.062
103.2
5-3/4
146.1
14
20.8
Full-Bore
45C
5.062
128.6
6
152.4
20-23
29.8-34.2
Full-Bore
45C
5.062
128.6
46.1
1.813
1.968 l 49.9 l
6
152.4
17-18
25.3-26.8
Full-Bore
45D
5.156
130.9
6
152.4
14-16
20.8-23.8
Full-Bore
45D
5.312
134.9
6-5/8
168.3
34
50.6
Full-Bore
45E
5.406
137.3
6-5/8
168.3
28-32
41.7-47.6
Full-Bore
45E
5.484
139.3
6-5/8
168.3
24-29
35.7-43.2
Full-Bore
45F
5.588
414.9
6-5/8
168.3
24-26.5
35.7-39.4
Full-Bore
47A
5.656
143.7
2.375
60.3
7
177.8
38-40
56.5-59.5
Full-Bore
47A
5.656
143.7
2.375
60.3
6-5/8
168.3
20-22
29.8-32.7
Full-Bore
47A
5.812
147.6
2.375
60.3
7
177.8
32-35
47.6-52.1
Full-Bore
47A
5.812
147.6
2.375
60.3
6-5/8
168.3
17
25.3
Full-Bore
47B
5.968
151.6
2.375
60.3
7
177.8
28-30
41.7-44.6
Full-Bore
47B
5.968
151.6
2.375
60.3
7
177.8
23-26
34.2-38.7
Full-Bore
47B
6.078
154.4
2.375
60.3
7
177.8
20-23
29.8-34.2
Full-Bore
47BC
6.210
157.7
2.375
60.3
7
177.8
17
25.3
Full-Bore
47BC
6.281
159.5
2.375
60.3
7-5/8
193.7
33.7-39
50.1-58.0
Full-Bore
47C
6.453
163.9
2.375
60.3
7-5/8
193.7
26.4-29.7
39.3-44.2
Full-Bore
47D
6.672
169.5
2.375
60.3
7-5/8
193.7
20-24
29.8-35.7
Full-Bore
47D
6.812
173.0
2.375
60.3
8-5/8
219.1
49
72.9
Full-Bore
49A
7.312
185.7
2.468
62.7
8-5/8
219.1
44
65.5
Full-Bore
49A
7.375
187.3
2.468
62.7
8-5/8
219.1
36-40
53.6-59.5
Full-Bore
49A
7.531
191.3
2.468
62.7
8-5/8
219.1
32
47.6
Full-Bore
49A
7.625
193.7
2.468
62.7
8-5/8
219.1
24-28
35.7-41.7
Full-Bore
49B
7.781
197.6
2.468
62.7
9
228.6
34-40
50.6-59.5
Full-Bore
49B
7.968
202.4
2.468
62.7
9-5/8
244.5
53.5
79.6
Full-Bore
51A
8.218
208.7
2.468
62.7
9-5/8
244.5
43.5-47
64.7-69.9
Full-Bore
51A
8.437
214.3
2.468
62.7
9-5/8
244.5
40
59.5
Full-Bore
51B
8.593
218.3
2.468
62.7
9-5/8
244.5
29.3-53.6
43.6-53.6
Full-Bore
51B
8.750
222.3
2.468
62.7
10-3/4
273.1
32.7-55.5
48.7-82.6
Full-Bore
53
9.440
239.8
4.000
101.6
11-3/4
298.5
38-60
56.5-89.3
Full-Bore
54
10.250
260.4
4.000
101.6
13-3/8
339.7
48-72
71.4-107.1
Full-Bore
55
11.875
301.6
4.000
101.6
X For combination strings of 5 in. (127.0 mm) 18 lb/ft (26.8 kg/m) and 21 lb/ft (31.2 kg/m).
l
22
Larger bores available when ordered only.
Retrievable Bridge Plugs
Retrievable Bridge Plugs
The workover systems product line has a wide variety
of retrievable bridge plugs available for all types of
remedial applications. Our retrievable bridge plugs
are designed for reliability and versatility and can
be utilized with threaded pipe, coiled tubing and
wireline. With an entire line of accessories readily
available, including setting tools and retrieving
heads for specific applications, the retrievable bridge
plugs are ideal for many types of pressure pumping
operations where a secure, retrievable portfolio of
pressure barrier is essential.
Specification Guide
B, J and L Retrievamatic/Hurricane plug
X
WG™
G™
GT™
C™
WLSRBP
D-1™/D-2™
F™/FT™
Wireline Set
Yes
No
No
Yes X
Yes
No
No
Coiled Tubing Set
Yes
No
No
Yes X
Yes
No
No
Yes
Tubing Set
Yes
Yes
Yes
Yes
Yes
Yes
Wireline Retrievable
Yes
No
No
Yes
Yes
No
No
Coiled Tubing Retrievable
Yes
No
No
Yes
Yes
Yes
Yes
Tubing Retrievable
Yes
Yes
Yes
Yes
Yes
Yes
Yes
With “wireline driver sleeve” installed in retrieving head
Tubing
Tubing
LT/CT™/L™
Retrieving Head
Retrievable Bridge Plug Model Type
Conveyance
Method
Tubing
E-4™ WLPSA
L™ Retrieving Head
H™ Retrieving Head
Wireline Adapter Kit
F™ Latching-Type
Packer Plug
GT™/G™ LOK-SET™
Retrievable Bridge Plug
WG™ Wireline Set
Retrievable Bridge Plug
F-1™ Retainer
Production Packer
C™ Retrievable
Bridge Plug
23
Retrievable Bridge Plugs
C Retrievable Bridge Plug
Product Family No. H67701
APPLICATION
A dependable plug that holds pressure from above or below, the
C™ is used for acidizing, formation fracturing and temporary
pressure containment.
This plug uses differential pressure from above or below to achieve
and maintain packoff. Once the plug has been run to the desired
depth and released, it sets automatically and seals against pressure
differential from either direction.
Simple to pick up and relocate, the retrievable bridge plug is ideal for
selective isolation and fracturing, acidizing or testing of several zones
in one round trip when used with a retrievable service packer. It is
run and retrieved with the H™ washover-type retrieving head (product
family no. H67771).
Features/Benefits
„„Circulation
passage through valves allows fluid to bypass
during running/retrieving, reducing swabbing
„„Opposed rocker slips prevent movement either up or down,
depending on the direction of the differential pressure
H Washover-Type Retrieving Head
Product Family No. H67771
APPLICATION
The H washover-type retrieving head, used with the C retrievable
bridge plug, allows washover operations with the mill shoe guide
and makes it easier to remove sand and debris from the top of the
bridge plug.
H Washover-type
Retrieving Head
Product Family No. H67771
Sealer Ball Catcher
(For C Retrievable Bridge Plug)
Product Family No. H67794
APPLICATION
The sealer ball catcher is a slotted basket threaded to the upper
valve cage of the C bridge plug. Its volume is adequate to catch the
average number of sealer balls used on acidizing jobs. The catcher
eliminates the balls from accumulating on top of the retrievable
bridge plug that could cause difficulties in retrieving.
24
c Retrieving Bridge plug
Product Family No. H67701
Retrievable Bridge Plugs
GTV LOK-SET Retrievable
Bridge Plug
Features/Benefits
„„Patented,
field-proven, zero-extrusion
gap retrievable packing element system
„„Performance rated to V0 according to
ISO specification 14310
„„Sure test feature — a retrievable bridge
plug with the ability to be tested from
above and below
„„Balanced unloading valve ensures easy,
safe pressure equalization
„„Well control through the drillpipe can
be maintained while equalizing pressure
from below the plug
„„Contains all proven features of the
GT LOK-SET retrievable bridge plug,
(product family no. H67734)
„„Opposed dovetailed slips prevent
movement in either direction and
minimize casing damage
„„Releasable lock segments hold the
tool in the set position
„„Right-hand set and release
„„Drilling and complete removal of hard
fill is possible with retrieving head before
equalizing and retrieving
„„Booster sleeve helps maintain element
packoff during pressure reversals
„„Teflon® bearing reduces the torque
required to release the bridge plug
Product Family No. H67740
APPLICATION
The GTV™ LOK-SET™ retrievable bridge plug is a
special version of the GT™ LOK-SET retrievable
bridge plug which can be tested from both below
and above before releasing from the bridge plug. The
GTV also allows well control through the drillpipe
while equalizing pressure from below the plug. The
LT-CT™ retrieving head has a telescoping milling
shoe that is used to retrieve the GTV when sand and
debris on top of the plug is anticipated. The LT-CT
is also used when well control is desired through
the drillpipe by allowing complete washing to the
top of the plug before the seal in the retrieving
head seals on the unloader of the GTV which stops
communication between the drillpipe and annulus.
(The LT-CT retrieving head is used to run, set, test
below, and retrieve the GTV.)
The GTV LOK-SET retrievable bridge plug is designed
as a long term abandonment bridge plug. Long term
is defined by the length of time in the well. This time
period starts when the bridge plug is set until it is
retrieved. Time frame varies from 1– 18 months.
Current regulations in some drilling markets
require three containment barriers for temporary
abandonment of a well. The GTV LOK-SET
retrievable bridge plug provides one of those
barriers and is a retrievable bridge plug that can
be tested from both above and below.
GtV LoK-Set
Retrievable Bridge plug
Product Family No. H67740
Specification Guide
Material No.
Bridge
Plug Size
Casing ID
Gage Ring
OD
Minimum
Collapse
Diameter
of Drag
Blocks
Packing
Element
OD
Packing
Element
Spacer
OD
in. (mm)
in. (mm)
in. (mm)
in. (mm)
in. (mm)
Packing
Element
System
(Durometer/
Elastomer)
Temperature
Range
Maximum Pressure
Ratings
Minimum
Set-Down
Weight and
Upstrain for
Pack Off
°F (°C)
psi (bar)
lb (kg)
H677-40-8290
8290
8.405-8.822
(213.5-224.1)
8.290
(210.6)
8.257
(209.7)
8.141
(206.8)
8.225
(209)
90-80-90
HNBR
40-300
(4.4-149)
8,500 (586) above
8,500 (586) below X
60,000
(27215.5)
H677-40-9340
9345
9.417-9.819
(239.2-249.4)
9.345
(237.4)
9.186
(233.3)
9.155
(232.5)
9.260
(235.2)
90-80-90
Nitrile
40-175
(4.4-79.4)
8,500 (586) above
8,500 (586) below X
60,000
(27215.5)
H677-40-9341
9345
9.417-9.819
(239.2-249.4)
9.345
(237.4)
9.186
(233.3)
9.155
(232.5)
9.260
(235.2)
90-80-90
HNBR
140-300
(60-148.9)
8,500 (586) above
8,500 (586) below X
60,000
(27215.5)
X
In unsupported casing, the rating from below is the lesser value of either the listed rating or 65% of the burst rating of the casing.
Teflon is a registered trademark of DuPont.
25
Retrievable Bridge Plugs
GT LOK-SET Retrievable Bridge Plug
Product Family No. H67737
APPLICATION
The GT™ LOK-SET™ retrievable bridge plug is a version of the G™ LOK-SET
retrievable bridge plug which can be positively tested from above and below.
Also, well control can be maintained through the tubing while equalizing
pressure from below the plug.
Current regulations in certain drilling markets require three containment barriers
for temporary abandonment of a well. The GT LOK-SET retrievable bridge plug
provides one of those barriers and is the only retrievable bridge plug that can be
positively tested from both above and below.
LT-CT LOK-SET Retrieving Head
Product Family No. H67778
APPLICATION
The LT-CT ™ LOK-SET retrieving head is used to run, set, test below, equalize, and
retrieve the GT LOK-SET retrievable bridge plug or the FT ™ latching type packer
plug. This retrieving head provides a seal between the tubing and the unloader
and has a telescoping sleeve on the bottom that permits easy washing to the top
of the plug.
Sealer Ball Catcher
(For the G LOK-SET Retrievable Bridge Plug)
Product Family No. H67795
APPLICATION
The sealer ball catcher is a slotted basket threaded to the lock nut of the
G™ bridge plug. Its volume is adequate to catch the average number of sealer
balls used on acidizing jobs. The catcher eliminates the balls from accumulating
on top of the retrievable bridge plug that could cause difficulties in retrieving.
Gt LoK-Set
Retrieving Bridge plug
Product Family No. H67737
26
Retrievable Bridge Plugs
G LOK-SET Retrievable Bridge Plug
Product Family No. H67734
APPLICATION
The G™ LOK-SET™ retrievable bridge plug is designed for higher-pressure,
higher-temperature applications than the C™ retrievable bridge plug.
Applications include multiple testing and treating operations, selective singlezone operations, fracturing, acidizing and cementing. The G can withstand high
differential pressure from above or below at high temperatures.
Features/Benefits
„„Balanced
unloader remains open while plug is engaged in the
retrieving head — this eliminates having to overcome pressure
differential while running in, packing off or retrieving
„„Triple packing element system retracts completely, allowing
fast, safe running, and retrieving — seals tightly against high
differential pressure
„„Opposed slips prevent movement either up or down
„„Circulation passage through the plug allows fluid to bypass during
running or retrieving, reducing swabbing
L LOK-SET Retrieving Head
Product Family No. H67775
APPLICATION
The L™ LOK-SET retrieving head is used for running and retrieving G LOK-SET
retrievable bridge plugs. While the retrieving head is engaged with the bridge
plug, the balanced unloading valve, which controls fluid flow through the bridge
plug, is open. When the plug sets and the retrieving head is released, the
unloading valve is automatically closed.
The retrieving head can be assembled with a rotating feature, making it easier
to wash sand and debris from the top of the bridge plug when retrieving.
G LoK-Set Retrieving Bridge plug
Product Family No. H67734
27
Retrievable Bridge Plugs
WG Retrievable Bridge Plug
Product Family No. H67739
APPLICATION
The WG™ retrievable bridge plug is for applications where the
speed and accuracy of wireline setting is desired while setting
and retrieving under pressure. The WG uses proven parts and
technology from the G™ LOK-SET™ retrievable bridge plug (product
family no. H67734). Typical applications for this plug are fracturing,
acidizing and testing. The plug is set on wireline using a wireline
adapter kit (product family no. H43846) and retrieved with a MWG™
retrieving head (product family no. H67776) on either tubing,
drillpipe, coiled tubing, or wireline.
Features/Benefits
„„High
performance pressure rating
triple packing element system
„„Opposing dovetail slips hold differential pressure
in both directions
„„Able to handle multiple pressure reversals
„„Proven
mWG Retrieving Head
Product Family No. H67776
MWG Retrieving Head
Product Family No. H67776
APPLICATION
The MWG retrieving head is used to retrieve the WG retrievable
bridge plug (product family no. H67739) on either tubing, drillpipe,
or coiled tubing. The MWG is used when washing over the WG
bridge plug is anticipated. The MWG has an extended washover
sleeve/shoe that improves washing capabilities. The MWG can
be run with optional circulation ports that allow greater washing
above the bridge plug if retrieving the WG in highly deviated wells
or in which high concentrations of sand exist.
WG Wireline Set
Retrievable Bridge plug
Product Family No. H67739
28
Retrievable Bridge Plugs
Wireline Set Retrievable Bridge Plug
Product Family No. H67732
APPLICATION
The wireline set retrievable bridge plug is a medium performance
retrievable bridge plug that combines the advantages of tubing or
sandline retrievability with the advantages of fast, accurate electric
wireline setting.
The wireline set retrievable bridge plug can be used for any operation that
the C™ retrievable bridge plug (product family no. H67701) is used, such
as zone isolation, formation fracturing or acidizing and surface equipment
repair, where the accuracy of electric wireline setting is desirable. This
provides a distinct advantage in situations in where the plug must be run
and retrieved under pressure, as it can be lubricated in and out of the
well, eliminating the necessity of snubbing tubing or killing the well. The
wireline set retrievable bridge plug is retrieved with the M™ washover
retrieving head (product family no. H67776).
M Retrieving Head
Product Family No. H67776
APPLICATION
The M™ retrieving head is used to retrieve the wireline set retrievable
bridge plug (product family no. H67732). The M retrieving head can
be used on tubing, drillpipe, or coiled tubing to retrieve the wireline
set retrievable bridge plug. The M retrieving head can also be used on
sandline or wireline to retrieve the bridge plug.
m Washover
Retrieving Head
Product Family No. H67776
Wireline Set
Retrievable Bridge plug
Product Family No. H67732
29
Retrievable Bridge Plugs
Specification Guide
Retrievable Bridge Plugs
Model C™
Retrievable Bridge Plug
Casing
OD
X
30
in.
mm
2-7/8
2-7/8
3-1/2
3-1/2
3-1/2
4
4
4
4-1/2
4-1/2
4-1/2
4-1/2
5
5
5
5
5
5
5
5-1/2
5-1/2
5-1/2
5-1/2
5-1/2
5-1/2
6
6
6
6
6-5/8
6-5/8
6-5/8
6-5/8
6-5/8
6-5/8
6-5/8
7
7
6-5/8
6-5/8
73.0
73.0
88.9
88.9
88.9
101.6
101.6
101.6
114.3
114.3
114.3
114.3
127.0
127.0
127.0
127.0
127.0
127.0
127.0
139.7
139.7
139.7
139.7
139.7
139.7
152.4
152.4
152.4
152.4
168.3
168.3
168.3
168.3
168.3
168.3
168.3
177.8
177.8
168.3
168.3
Weight (Nominal)
lb/ft
kg/m
6.4-6.5
4.7-5.6
10.2
7.7-9.3
5.7
9.5
12.93
5.65
13.5-16.6
11.6-13.5
9.5-13.5
9.5-10.5
20.3-24.2
21
18-20.3
18
15
11.5-15
11.5-13
26
20-23
15.5-20
15.5-17
13-15.5
13-14
26
20-23
18
15
34
32
28
24-29
24-28
24
17-24
38-41
38
20
17
9.5-9.7
7.0-8.3
15.2
11.5-13.7
8.5
14.1
19.2
8.4
20.1-24.7
17.3-20.1
14.1-20.1
14.1-15.6
30.2-36.0
31.2
26.8-30.2
26.8
22.3
17.1-22.3
17.1-19.33
38.7
29.8-34.2
23.1-29.8
23.1-25.3
19.3-23.1
19.3-20.8
38.7
29.8-34.2
26.8
22.3
50.6
47.6
41.7
35.7-43.2
35.7-41.7
35.7
25.3-35.7
56.5-61.0
56.5
29.8
25.3
Tool
Size
28A
28B
35A
35B
35C
41A
41A
41B
41B
43A
43A
43A
N/A
43A
N/A
43B
43B
N/A
43C
N/A
45A X
N/A
45A X
N/A
45B X
N/A
45C X
45D X
45D X
N/A
45E X
45E X
45F X
45F X
47A
N/A
N/A
47A
47A
47B
Thimble OD
in.
mm
2.218
2.218
2.734
2.796
2.937
3.244
3.244
3.578
3.578
3.771
3.771
3.771
N/A
3.937
N/A
4.062
4.125
N/A
4.250
N/A
4.500
N/A
4.641
N/A
4.781
N/A
5.063
5.156
5.250
N/A
5.406
5.484
5.588
5.588
5.656
N/A
N/A
5.656
5.812
5.968
56.3
56.3
69.4
71.0
74.6
82.4
82.4
90.9
90.9
95.8
95.8
95.8
N/A
100.0
N/A
103.2
104.8
N/A
108.0
N/A
114.3
N/A
117.9
N/A
121.4
N/A
128.6
131.0
133.4
N/A
137.3
139.3
141.9
141.9
143.7
N/A
N/A
143.7
147.6
151.6
Model G™ and GT™
Retrievable Bridge Plug
Tool
Size
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
43A2
43A4
N/A
N/A
43A4
43B
43B
43C
43C
43C
45A2
45A4
45A4
45B
45B
45B
45C
45D
45D
45E2
45E4
45E4
N/A
45F
47A2
N/A
N/A
47A2
47A4
47A4
Gauge Ring OD
in.
mm
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
3.771
3.875
N/A
N/A
3.875
4.125
4.125
4.250
4.250
4.250
4.500
4.641
4.641
4.781
4.781
4.781
5.063
5.156
5.156
5.406
5.484
5.484
N/A
5.625
5.656
N/A
N/A
5.656
5.812
5.812
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
95.8
98.4
N/A
N/A
98.4
104.9
104.9
108.0
108.0
108.0
114.3
117.9
117.9
121.4
121.4
121.4
128.6
131.0
131.0
137.3
139.3
139.3
N/A
142.9
143.7
N/A
N/A
143.7
147.6
147.6
Model WG™
Retrievable Bridge Plug
Tool
Size
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
43A2
N/A
43A4
43A4
N/A
N/A
43B
43B
43C
43C
43C
45A2
45A4
45A4
45B
45B
45B
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
47A2
N/A
47A2
47A2
47A4
47A4
Gauge Ring OD
in.
mm
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
3.771
N/A
3.875
3.875
N/A
N/A
4.125
4.125
4.250
4.250
4.250
4.500
4.641
4.641
4.781
4.781
4.781
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
5.656
N/A
5.656
5.656
5.812
5.812
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
45.8
N/A
98.4
98.4
N/A
N/A
104.8
104.8
108.0
108.0
108.0
114.3
117.9
117.9
121.4
121.4
121.4
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
143.7
N/A
143.7
143.7
147.6
147.6
Wireline Set
Retrievable Bridge Plug
Tool
Size
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
43A
43A
N/A
N/A
N/A
43B
43B
43C
43C
43C
45A2
45A4
45A4
45B
45B
45B
45C
45D
45D
45E
45F
45F
45F
45F
47A2
45G
N/A
47A2
47A4
47A4
Gauge Ring OD
in.
mm
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
3.771
3.771
N/A
N/A
N/A
4.125
4.125
4.250
4.250
4.250
4.500
4.641
4.641
4.781
4.781
4.781
5.062
5.156
5.156
5.406
5.484
5.484
5.484
5.484
5.656
5.781
N/A
5.656
5.812
5.812
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
95.8
95.8
N/A
N/A
N/A
104.9
104.9
108.0
108.0
108.0
114.3
117.9
117.9
121.4
121.4
121.4
128.6
131.0
131.0
137.3
139.3
139.3
139.3
139.3
143.7
146.8
N/A
143.7
147.6
147.6
A size 45 GT style unloader subassembly and retrieving head have been designed for use with PIP™s. The design has not had any field runs as a GT LOK-SET.
retrievable bridge plug. For more information on this product, contact the remedial systems AEG Group at the Navigation facility in Houston.
Retrievable Bridge Plugs
Specification Guide
Retrievable Bridge Plugs (Continued)
Model C™
Retrievable Bridge Plug
Casing
OD
X
in.
mm
7
7
7
7
7
7
7
7
7-5/8
7-5/8
7-5/8
8-5/8
8-5/8
8-5/8
8-5/8
8-5/8
8-5/8
8-5/8
9-5/8
9-5/8
9-5/8
9-5/8
9-5/8
9-5/8
9-5/8
9-5/8
10-3/4
10-3/4
10-3/4
10-3/4
11-3/4
13-3/8
13-3/8
177.9
177.9
177.9
177.9
177.9
177.9
177.9
177.9
193.7
193.7
193.7
219.1
219.1
219.1
219.1
219.1
219.1
219.1
244.5
244.5
244.5
244.5
244.5
244.5
244.5
244.5
273.1
273.1
273.1
273.1
298.5
337.7
337.7
Weight (Nominal)
lb/ft
kg/m
32-35
29
26-29
23-26
20-26
20-23
17-20
17
33.7-39
24.6-29.7
20-24
49.1-54
43-49
40-49
32-40
20-28
28
24
71.8
58.4-61.1
47-53.5
40-47
43.5-53.5
36-40
32.75-55.5
29.3-36
71.1-81
55.5-65.7
32.75-55.5
32.7-51
38-60
68-72
48-61
47.6-52.1
43.2
38.7-43.2
34.2-38.7
29.8-38.7
29.8-34.2
25.3-29.8
25.3
50.1-58.0
39.3-44.2
29.8-35.7
73.1-80.4
64.0-72.9
59.5-72.9
47.6-59.5
29.8-41.7
41.7
35.7
106.8
86.9-90.9
69.9-79.6
59.5-69.9
64.7-79.6
53.6-59.5
48.7-82.6
43.6-53.6
105.8-120.5
82.6-97.8
48.7-82.6
48.7-75.9
56.5-89.3
101.2-107.1
71.4-90.8
Tool
Size
47A
47B
N/A
47B
N/A
47B
N/A
47C
47C
47D
N/A
N/A
49A
49A
49A
49B
49B
49B
N/A
N/A
N/A
N/A
51A
51B
N/A
N/A
N/A
N/A
53
53
54
55A
55B
Thimble OD
in.
mm
5.812
5.968
5.968
6.078
6.078
6.120
N/A
6.266
6.453
6.672
N/A
N/A
7.375
7.375
7.375
7.375
7.375
7.375
N/A
N/A
N/A
N/A
8.281
8.375
N/A
N/A
N/A
N/A
9.500
9.500
10.375
11.875
11.875
147.6
151.6
151.6
154.4
154.4
157.7
N/A
159.2
163.9
169.5
N/A
N/A
187.3
187.3
187.3
187.3
187.3
187.3
N/A
N/A
N/A
N/A
210.3
212.7
N/A
N/A
N/A
N/A
241.3
241.3
263.5
301.6
301.6
Model G™ and GT™
Retrievable Bridge Plug
Tool
Size
47A4
47B2
47B2
47B4
47B4
N/A
47C2
47C2
47C4
47D2
47D4
49A1
49A2
N/A
49A4
49B
49B
49B
49B
51A1
51A2
51A4
N/A
N/A
N/A
51B
53A2
53A4
N/A
53B
N/A
N/A
N/A
Gauge Ring OD
in.
mm
5.812
5.968
5.968
6.078
6.078
N/A
6.266
6.266
6.453
6.672
6.812
7.218
7.312
N/A
7.531
7.781
7.781
7.781
7.781
8.093
8.218
8.437
N/A
N/A
N/A
8.593
9.000
9.375
N/A
9.625
N/A
N/A
N/A
147.6
151.6
151.6
154.4
154.4
N/A
159.2
159.2
163.9
169.5
173.0
183.3
185.7
N/A
191.3
197.6
197.6
197.6
197.6
205.6
208.7
214.3
N/A
N/A
N/A
218.3
228.6
238.1
N/A
244.5
N/A
N/A
N/A
Model WG™
Retrievable Bridge Plug
Tool
Size
47A4
47B2
47B2
47B4
N/A
N/A
47C2
47C2
47C4
47D2
47D4
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Gauge Ring OD
in.
mm
5.812
5.968
5.968
6.078
N/A
N/A
6.266
6.266
6.453
6.672
6.812
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
147.6
151.6
151.6
154.4
N/A
N/A
159.2
159.2
163.9
169.5
173.0
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Wireline Set
Retrievable Bridge Plug
Tool
Size
47A4
47B2
47B2
47B4
N/A
N/A
47C2
47C2
47C4
47D2
47D4
N/A
N/A
N/A
N/A
49
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Gauge Ring OD
in.
mm
5.812
5.968
5.968
6.078
N/A
N/A
6.266
6.266
6.453
6.671
6.812
N/A
N/A
N/A
N/A
7.796
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
147.6
151.6
151.6
154.4
N/A
N/A
159.2
159.2
163.9
169.5
173.0
N/A
N/A
N/A
N/A
198.0
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
A size 45 GT style unloader subassembly and retrieving head have been designed for use with PIP™s. The design has not had any field runs as a GT LOK-SET.
retrievable bridge plug. For more information on this product, contact the remedial systems AEG Group at the Navigation facility in Houston.
31
Retrievable Bridge Plugs
D-1 and D-2 Latching-Type Packer Plugs
Product Family No. H66511
APPLICATION
The D-1™ and D-2™ latching-type packer plugs can be run either below a
retrievable service packer or by itself. The packer plug converts a permanent
packer into a temporary bridge plug and contains a pressure-equalizing feature
to facilitate release; no rotation is required.
The H™ washover-type retrieving head (product family no. H67771), the same
used on the C™ retrievable bridge plug (product family no. H67701), is used to
run and retrieve this type packer plug.
F Latching-Type Packer Plug
Product Family No. H66512
APPLICATION
The F™ latching-type packer plug can be run below a retrievable service packer
or it can be run by itself. The packer plug converts a permanent packer into a
temporary bridge plug and contains a pressure-equalizing feature to facilitate
release; however, right-hand rotation is required.
The L™ LOK-SET retrieving head (product family no. H67775) is the same as used
on the G™ LOK-SET retrievable bridge plug (product family no. H67734) and is
used to run and retrieve this type of packer plug.
FT Latching-Type Packer Plug
Product Family No. H66518
APPLICATION
The FT ™ latching-type packer plug is a version of the F latching-type packer plug
which can be positively tested from above and below.
Current regulations in certain drilling markets require three containment
barriers for temporary abandonment of a well. The FT provides one of those
barriers and is the only packer plug that can be positively tested from both
above and below. The FT is run and retrieved with the LTC™ or the
LT-CT™ retrieving heads (product family no. H67778).
d-1 and d-2 Latching-type plugs
Product Family No. H66511
f Latching-type packer plug
Product Family No. H66512a
32
Retrievable Bridge Plugs
Combination Bottomhole Assemblies
Tubing
Tubing
Using components from retrievable service packers,
retrievable bridge plugs and the accessories can provide an
efficient and effective bottomhole assembly to allow for a
multitude of pressure pumping operations.
S™ Tubing Tester
S™ Tubing Tester
P-2™ Set-Down
Unloader
P-2 Set-Down
Unloader
™
Retrievamatic Style
Service Packer
Retrievamatic Style
Service Packer
L™ Retrieving Head
L™ Retrieving Head
F™ Latching-Type
Packer Plug
C™ Retrievable
Bridge Plug
F-1™ Retainer
Production Packer
33
34
S t r a d d l e Tr e a t m e n t To o l s
and Accessories
Straddle Treatment Tools and Accessories
Tubing
Top No-Go Tubing
Nipple With Injection
Control Valve or Tubing
Mounted ICV
The workover systems line of straddle treatment tools and
accessories are ideal for:
„„Fracture stimulation or acidizing perforations in casing or
sand screens
„„Checking new perforations to establish injectivity and
verify penetration
„„Opening a void behind the casing for more effective gravel
packing and sand consolidation
The straddle treatment tools and accessories offered are designed
to work dependably to target specific zones for treatment. We
offer straddle treatment tools and accessories with a field-proven
packing element system or cup-type element system depending on
the application. Also, our straddle treatment tools and accessories
can provide a wide range of spacing adjustments to wash from a
single set of perforations to an entire interval of perforations.
The field of accessories that accompany the straddle treatment
tools and accessories allow even more accurate placement of
treatment fluids and more control over applied pressures to
perforation intervals.
Specification Guide
Straddle treatment tools and accessories conveyance
E™ Circulating Washer
Wash Tool Type/Accessory
Conveyance
Method
SAP™ Tool
C™
E™/E-1™
Injection
Control
Valves
Wireline
No
No
No
Yes
Coiled Tubing
No
Yes
Yes
No
Tubing
Yes
Yes
Yes
Yes
35
S t r a d d l e Tr e a t m e n t To o l s
and Accessories
Service Adaptable Packer-SAP Tool
Product Family No. H47043
APPLICATION
The service adaptable packer-SAP ™ tool is a set-down packer used to isolate short sections of
perforations–down to 6 in. (152.4 mm) — between two sets of packing elements. The tool’s
retrievamatic style packing element system withstands much greater service pressure and
lasts much longer in the hole when compared to standard cup-type wash tools. After individual
breakdown, acidizing, or washing, the tool can be moved uphole to treat or test the entire zone.
Features/Benefits
„„Large
bypass area permits circulation around and through tool while running
in–straight pickup to equalize
„„Hold-down buttons maintain packoff during high-pressure operations from below
„„Retrievamatic style packing element system has set more than 400 times,
including formation test — in one trip
„„Wash interval spacing adjustable down to 6 in. (152.4 mm)
„„Mandrel plug can be run in place; dropping the plug allows faster run-in (not shown)
„„Retrievamatic style rocker slips set with only 3/4 of a turn-straight pickup to retrieve
„„Right or left-hand set is selected in the field
Mechanical Injection Control Valve
Product Family No. H71440
APPLICATION
The mechanical injection control valve (MICV) is designed for use in conjunction with the service
adaptable packer–SAP tool (product family no. H47043) for perforation washing and acidizing.
The MICV is used to support the hydrostatic head in the tubing when working in wells with
a low fluid level or low reservoir pressure.
The MICV is opened to the metering position by setting down weight against the SAP and
is closed by straight upward pull. In the closed position, the MICV will hold full tubing
hydrostatic pressure.
mechanical injection
control Valve
Product Family No. H71440
Features/Benefits
„„Lower mandrel extension is available to match the mandrel rod of MICV to SAP
spacing; it is necessary to match MICV spacing exactly to SAP spacing; the basic
tool has 6 in. (152.4 mm) spacing like the SAP
„„Interchangeable and replaceable meter rings control flow through tool
„„Option of left-hand (standard) or right-hand J-slot
„„Mandrel plug for SAP connects directly to MICV lower mandrel
36
Service adaptable
packer-Sap tool
Product Family No. H47043
S t r a d d l e Tr e a t m e n t To o l s
and Accessories
C Packing Element Circulating Washer
Product Family No. H47042
APPLICATION
Using hydraulically operated packing elements rather than cups, the C™ packing element
circulating washer has a large bypass area for ease of retrievability and circulation. The C will
not swab the well in or draw sand into the casing and allows positive circulation of sand and
debris off of the bottom when reversing out.
Features/Benefits
„„Large
bypass area permits circulation around and through the tool while running
in prevents swabbing while retrieving
„„Retrievamatic style packing element system
„„Packing element spacing ensures more complete penetration of washing fluids
in short perforation intervals
„„Available extensions enable economical treating of long perforated zones
„„Pressure relief valves direct tubing pressure first to packing elements, then to
wash interval. At the desired flow rate, the tubing pressure is always higher
than the formation injection pressure as a result of the pressure drop across
these valves
Service adaptable
packer-Sap tool
Product Family No. H47042
37
S t r a d d l e Tr e a t m e n t To o l s
and Accessories
Model A Set-Down Anchor
Product Family No. H47052
APPLICATION
The Model A™ set-down anchor is used in conjunction with the C™ packing element
circulating washer (product family no. H47042). The Model A is used to support the
workstring during pressure pumping operations with the C washer. The Model A has
a very rugged construction that extends its life for washing operations, but also has
a simple construction with a minimum number of working parts. The Model A uses a
field-proven rocker-type slip design. The set-down anchor is short and compact for ease
of use and minimum tubing movement is required at the tool to engage the anchor.
HD Set-Down Anchor
Product Family No. H47056
APPLICATION
The HD™ set-down anchor is used with the C packing element circulating washer
(product family no. H47042). The HD is similar to the Model A set-down anchor in
application but has a different setting mechanism. The HD anchor has an L-slot type
setting mechanism similar to the L™ retrievamatic service packer and uses many of the
same parts. The HD anchor is able to remain in the set position as the workstring is
moved up the hole.
model a Set-down anchor
Product Family No. H47052
Hd Set-down anchor
Product Family No. H47056
38
S t r a d d l e Tr e a t m e n t To o l s
and Accessories
E Circulating Washer With Model A
Sliding Sleeve Valve
Product Family No. H47016
APPLICATION
The E™ circulating washer is a reliable cup-type tool used for washing or acidizing
perforations in casing or sand screens, for checking new perforations for injectivity,
or to open a void behind casing for more effective gravel packing.
The E is a cup-type, straddle tool, incorporating proven washing tool characteristics.
Among the more important design features of the E circulating washer are modular
construction, which permits rapid change of cup spacing, and the ability to effectively
reverse sand and debris off bottom.
The Model A sliding sleeve valve is designed to be run above the E circulating washer.
The valve opens and closes circulating ports between the tubing and annulus for either
spotting wash fluids or draining the tubing when the tool is being retrieved. The valve
opens with downward motion and can be locked in the open or closed positions with
right-hand rotation.
Features/Benefits
„„Large
flow area reduces pressure loss
range of packer cup spacing allows flexibility
„„Dependable sleeve valve
„„Valve can be locked open or closed
„„Wide
e circulating Washer With
model a Sliding Sleeve Valve
Product Family No. H47016
39
S t r a d d l e Tr e a t m e n t To o l s
and Accessories
C Injection Control Valve (ICV)
Product Family No. H71431
APPLICATION
The C™ injection control valve (ICV) was designed for deep well, high-volume
displacement service. The sealing surfaces on the control valve are made
of a ceramic material. The ceramic material resists seal erosion normally
associated with high volume displacement service.
Features/Benefits
„„Ceramic
valve seal has longer working life
performance rating 6,000 psi (41.5 Kpa) and pumping rates
up to 4 BPM
„„Improved design resists plugging
„„Saves expensive treating fluids
„„Uses standard seating nipple
„„Can be equalized and retrieved on sandline or slickline
„„High
Injection Control Valve (ICV)
Product Family No. H71425
APPLICATION
The injection control valve (ICV) is used to support the hydrostatic head in
the tubing during treating operations in wells with low reservoir pressures. It
prevents the loss of expensive treating fluids when moving between intervals
or during shut-in periods. The valve is opened by applying pressure down the
tubing. The ICV can be run in place or dropped from surface if tubing contains
a sufficient fluid level. The valve can be equalized and retrieved on sandline
or slickline.
Features/Benefits
„„Saves
expensive treating fluids
„„Can be set to support up to 4,000 psi (27.8 Kpa) hydrostatic
„„Uses standard seating nipple
„„Can be equalized and retrieved on sandline or slickline
c injection control Valve
Product Family No. H71431
injection control Valve
Product Family No. H71425
40
S t r a d d l e Tr e a t m e n t To o l s
and Accessories
Unloading Injection Control Valve (UICV)
Product Family No. H71427
APPLICATION
The unloading injection control valve (UICV) is a tubing mounted downhole
fluid regulating valve which enables the C™ packing element circulating
washer to function in low fluid level wells. The UICV may also be set up
to act as a backflow check valve for backflowing wells in addition to its
other functions. The UICV may also be used with the E™ circulating washer
because it will unload the pressure on the cups before the tool is moved.
Note: Wireline tools cannot be used when UICV is used as a backflow
check valve.
Features/Benefits
„„The
UICV is entirely pressure operated so no tubing movement
is required for actuation
„„The UICV uses retreivamatic-type face seals for proven reliability;
large flow ports minimize plugging with scale and sand
„„The large 2 in. (50.8 mm) bore (2-7/8-in. size only) allows the
passage of wireline tools
A-1 Mechanical Collar Locator
Product Family No. H59951
APPLICATION
The A-1 mechanical collar locator provides a simple means of accurately
locating any tool which was run in threaded and coupled casing. The
mechanical collar locator features simple construction, large fluid bypass
area and compatibility with primary tool operation. Collars can be located as
many times as desired by picking up through the collar, then slacking back
through it. This movement will give a clear surface indication on the weight
indicator as the dogs locate and move through the J-J of the coupling.
a-1 mechanical
collar Locator
Product Family No. H59951
unloading injection
control Valve
Product Family No. H71427
41
S t r a d d l e Tr e a t m e n t To o l s
and Accessories
SPECIFICATION GUIDE
Straddle Treatment Tools
Service Adaptable Packer
(SAP™) Tool
Casing
OD
Tool
Size
Gauge
Ring OD X
in.
mm
lb/ft
kg/m
4-1/2
114.3
9.5-13.5
14.1-20.1
5
127.0
18-21
26.8-31.2
N/A
N/A
N/A
5
127.0
15-18
22.3-26.8
43B
4.125
104.8
43A
Tool ID l
Tool
Size
Thimble OD
Tool ID
Tool
Size
Gauge
Ring OD X
Tool ID
in.
mm
in.
mm
in.
mm
in.
mm
3.771
95.8
1.000
25.4
43B
3.775
95.9
1.109
28.2
N/A
N/A
43C
3.935
100.0
1.109
28.2
N/A
N/A
N/A
N/A
N/A
1.000
25.4
N/A
N/A
N/A
N/A
N/A
43B
4.125
104.8
1.093
27.8
43A
in.
mm
in.
mm
3.771
95.8
1.093
27.8
5
127.0
11.5-15 X
17.1-22.4
43C
4.250
108.0
1.000
25.4
43D
4.125
104.8
1.109
28.2
43C
4.250
108.0
1.093
27.8
5-1/2
139.7
26
38.7
43C
4.250
108.0
1.000
25.4
N/A
N/A
N/A
N/A
N/A
43C
4.250
108.0
1.093
27.8
5-1/2
139.7
20-23
29.8-34.2
45A2
4.500
114.3
1.000
25.4
45A
4.500
114.3
1.234
31.3
44
4.406
111.9
1.113
28.3
5-1/2
139.7
20-23
29.8-34.2
45A2
4.500
114.3
1.000
25.4
45A
4.500
114.3
1.234
31.3
45A2
4.500
114.3
1.113
28.3
5-1/2
139.7
15.5-20 X
23.1-29.8
45A4
4.641
117.9
1.000
25.4
N/A
N/A
N/A
N/A
N/A
45A4
4.641
117.9
1.113
28.3
5-1/2
139.7
15.5-17
23.1-25.3
N/A
N/A
N/A
N/A
N/A
45B
4.625
117.5
1.234
31.3
N/A
N/A
N/A
1.113
28.3
5-1/2
139.7
13-15.5
19.3-23.1
45B
4.781
121.4
1.000
25.4
N/A
N/A
N/A
N/A
N/A
45B
4.781
121.4
1.113
28.3
5-1/2
139.7
13-14
19.3-20.8
45B
4.781
121.4
1.000
25.4
45C
4.781
121.4
1.234
31.3
N/A
N/A
N/A
N/A
N/A
5-3/4
146.1
22.5
33.5
45B
4.781
121.4
1.000
25.4
N/A
N/A
N/A
N/A
N/A
45B
4.781
121.4
1.113
28.3
6
152.4
26
38.7
45B
4.781
121.4
1.000
25.4
N/A
N/A
N/A
N/A
N/A
45B
4.781
121.4
1.113
28.3
6
152.4
20-23
29.8-34.2
45C
5.062
128.6
1.000
25.4
45D
5.063
128.6
1.234
31.3
45C
5.062
128.6
1.113
28.3
6
152.4
15-18
22.3-26.8
45D
5.156
131.0
1.000
25.4
N/A
N/A
N/A
N/A
N/A
45D
5.156
131.0
1.113
28.3
6
152.4
18
26.8
45D
5.156
131.0
1.000
25.4
45E
5.156
131.0
1.234
31.3
45D
5.156
131.0
1.113
28.3
6
152.4
15
22.3
45D
5.156
131.0
1.000
25.4
45F
5.250
133.4
1.234
31.3
45D
5.156
131.0
1.113
28.3
6-5/8
168.3
34
50.6
45E2
5.406
137.3
1.000
25.4
N/A
N/A
N/A
N/A
N/A
45E2
5.406
137.3
1.113
28.3
6-5/8
168.3
28-32
41.7-47.6
45E4
5.484
139.3
1.000
25.4
N/A
N/A
N/A
N/A
N/A
45E4
5.484
139.3
1.113
28.3
6-5/8
168.3
32
47.6
45E4
5.484
139.3
1.000
25.4
45G
5.406
137.3
1.234
31.3
45E4
5.484
139.3
1.113
28.3
6-5/8
168.3
28
41.7
45E4
5.484
139.3
1.000
25.4
45H
5.484
139.3
1.234
31.3
45E4
5.484
139.3
1.113
28.3
6-5/8
168.3
24-29
35.7-43.2
45F
5.625
142.9
1.000
25.4
N/A
5.484
139.3
1.234
31.3
45F
5.625
142.9
1.113
28.3
6-5/8
168.3
24
35.7
47A2
5.656
143.7
2.000
50.8
47A
5.656
143.7
1.484
37.7
47A2
5.656
143.7
1.988
50.5
7
177.8
38
56.5
47A2
5.656
143.7
2.000
50.8
47A
5.656
143.7
1.484
37.7
47A2
5.656
143.7
1.988
50.5
6-5/8
168.3
17-20
25.3-29.8
47A4
5.812
147.6
2.000
50.8
N/A
5.656
143.7
1.484
37.7
47A4
5.812
147.6
1.988
50.5
6-5/8
168.3
20
29.8
47A4
5.812
147.6
2.000
50.8
47B
5.812
147.6
1.484
37.7
47A4
5.812
147.6
1.988
50.5
6-5/8
168.3
17
25.3
47A4
5.812
147.6
2.000
50.8
47C
5.968
151.6
1.484
37.7
47A4
5.812
147.6
1.988
50.5
7
177.9
32-35
47.6-52.1
47A4
5.812
147.6
2.000
50.8
47B
5.812
147.6
1.484
37.7
47A4
5.812
147.6
1.988
50.5
7
177.9
29
43.2
47B2
5.968
151.6
2.000
50.8
47C
5.968
151.6
1.484
37.7
47B2
5.968
151.6
1.988
50.5
7
177.9
26-29
38.7-43.2
47B2
5.968
151.6
2.000
50.8
N/A
N/A
N/A
N/A
N/A
47B2
5.968
151.6
1.988
50.5
7
177.9
23-26
34.2-38.7
47B4 n
6.078
154.4
2.000
50.8
47D
5.968
151.6
1.484
37.7
47B4 n
6.078
154.4
1.988
50.5
7
177.9
20-26 X
29.8-38.7
47B4 n
6.078
154.4
2.000
50.8
N/A
N/A
N/A
N/A
N/A
47B4 n
6.078
154.4
1.988
50.5
7
177.9
17-20
25.3-29.8
47C2
6.266
159.2
2.000
50.8
47E
5.968
151.6
1.484
37.7
47C2
6.266
159.2
1.988
50.5
7-5/8
193.7
33.7-39
50.1-58.0
47C4
6.453
163.9
2.000
50.8
47F
6.375
161.9
1.484
37.7
47C4
6.453
163.9
1.988
50.5
7-5/8
193.7
24-29.7
35.7-44.2
47D2
6.672
169.5
2.000
50.8
47G
6.562
166.7
1.484
37.7
47D2
6.672
169.5
1.988
50.5
7-5/8
193.7
20-24
29.8-35.7
47D4
6.812
173.0
2.000
50.8
N/A
N/A
N/A
N/A
N/A
47D4
6.812
173.0
1.988
50.5
8-5/8
219.1
44-49
65.5-72.9
49A2
7.312
185.7
2.000
50.8
N/A
N/A
N/A
N/A
N/A
49A2
7.312
185.7
2.488
63.2
8-5/8
219.1
40-49
59.5-72.9
N/A
N/A
N/A
N/A
N/A
49A
7.375
187.3
1.484
37.7
N/A
N/A
N/A
N/A
N/A
8-5/8
219.1
32-40
47.6-57.9
49A4
7.531
191.3
2.000
50.8
N/A
N/A
N/A
N/A
N/A
49A4
7.531
191.3
2.488
63.2
63.2
8-5/8
219.1
36
53.6
49A4
7.531
191.3
2.000
50.8
49B
7.375
187.3
1.484
37.7
49A4
7.531
191.3
2.488
8-5/8
219.1
28-32
41.7-47.6
N/A
N/A
N/A
N/A
N/A
49C
7.375
187.3
1.484
37.7
N/A
N/A
N/A
N/A
N/A
8-5/8
219.1
20-28
29.8-40.5
49B
7.781
197.6
2.000
50.8
N/A
N/A
N/A
N/A
N/A
49B
7.781
197.6
2.488
63.2
8-5/8
219.1
24
35.7
N/A
N/A
N/A
N/A
N/A
49D
7.75
187.3
1.484
37.7
49B
7.781
197.6
2.488
63.2
9-5/8
244.5
47-53.5
69.9-79.6
51A2
8.218
208.7
2.000
50.8
51A
8.281
210.3
1.484
37.7
51A2
8.218
208.7
2.488
63.2
9-5/8
244.5
40-47
57.9-69.9
51A4
8.437
214.3
2.000
50.8
N/A
N/A
N/A
N/A
N/A
51A4
8.437
214.3
2.488
63.2
9-5/8
244.5
36-43.5
53.6-64.7
51A4
8.437
214.3
2.000
50.8
51B
8.375
212.7
1.484
37.7
N/A
N/A
N/A
N/A
N/A
9-5/8
244.5
29.3-36
43.6-53.6
51B
8.593
218.3
2.000
50.8
N/A
N/A
N/A
N/A
N/A
51B
8.593
218.3
2.488
63.2
10-3/4
273.1
32.75-55.5
48.7-60.3
N/A
N/A
N/A
N/A
N/A
53
9.500
241.3
1.484
37.7
N/A
N/A
N/A
N/A
N/A
X
l
n
42
Weight (T&C)
C™ Packing Element
Circulating Washer
E™ Circulating Washer
It may necessary to turn OD of gauge ring, guide ring and packing element spacers when running in minimum ID casing.
Standard ID listed only. Other IDs may be special ordered. Contact your Baker Hughes Representative.
This size packer may be set in this weight casing in certain circumstances such as mixed strings or unusual hole conditions; however, the other size packer
listed of this weight is recommended and should be run where possible.
Drillable Products
Drillable Bridge Plugs
J™ Hydraulic
Setting Tool
E-4™ WLPSA
Wireline
Adapter Kit
Wireline
Adapter Kit
Offered to the oil and gas industry through Baker Hughes
districts and hundreds of competent and reliable licensed
wireline perforating and/or logging companies, the workover
systems line of drillable bridge plugs are some of the most
reliable bridging devices available to date. The materials
used for the drillable bridge plugs are subject to stringent
specifications and quality control procedures to provide
improved drillability and pressure ratings. The lean construction
of the bridge plugs permit them to be run in the hole as fast as
well conditions permit. The varied models offered by workover
systems allow for any conveyance method type available on
site; thread pipe, coiled tubing or wireline setting tools may be
used. From applications ranging from multiple zone isolation
to major plug and abandonment campaigns, these drillable
bridge plugs can only offer the most versatile and dependable
bridging devices for all applications.
Specification Guide
drillable Bridge plug conveyance
N-1™ Wireline
Set Bridge Plug
N-1™ Wireline
Set Bridge Plug
Drillable Bridge Plug Model Types
Conveyance
Method
TV-10™
QUIK Drill™
N-1™/NC-1™
HMN™
N™/N-2™
N-3™
Wireline
Yes
Yes
Yes
No
Yes
Yes
Coiled Tubing
Yes
Yes
Yes
No
Yes
Yes
Tubing
Yes
Yes
Yes
Yes
No
No
43
Drillable Products
poRtfoLio
QuiK drill composite plug
HPHT Composite
Bridge/Frac Plug
Composite
Bridge/Frac Plug
Tubing-Sized
Composite Bridge Plug
Generation 3.0 Composite
Bridge/Frac Plug
Hi-Value Composite
Bridge/Frac Plug
Barnett Shale Pump-Down
Composite Frac Plug
FASTFrac™ Composite
Bridge Plug
Supreme
Performance/Extreme
Applications Up to
450°F (232.2°C)
Up to 12,500 psi
(861.8 bar)
Multi-Purpose
High Performance
Up to 350°F (177°C)
Up to 10,500 psi
(724 bar)
High Performance
Tubing Size
Applications
Up to 350°F (177°C)
Up to 10,000 psi
(689.5 bar)
Rugged Mid-Range
Performance
Up to 325°F (163°C)
Up to 10,000 psi
(689.5 bar)
Cost Competitive with
Superior Performance
Up to 250°F (121.1°C)
Up to 9,000 psi
(620.5 bar)
Horizontal Hydraulic
Pump-Down Applications
Up to 200°F (93.3°C)
Up to 8,000 psi (551.6 bar)
Shallow Gas and Coal
Bed Methane Up to
200°F (93.3°C)
Up to 5,000 psi
(345 bar)
*Not all configurations of each model will achieve the ratings shown.
44
Drillable Products
REFERENCE GUIDE
QUIK Drill
This QUIK Drill reference guide was created in order to organize the tools available through the remedial systems team. In order to make
searching simple, the tools were divided into tables according to the tool size such as the 211, 240, 255, 360, 438 and 575. Then, each table
was separated into configurations such as the standard bridge plugs, 2.0 frac plugs, CIC bridge plugs, etc.
Tool Size: 211
Casing Size
Reference (in.)
Type
Product Family No.
Casing Range
Pressure Rating
(psi) (bar)
Temperature Range
(°F) (°C)
Max Tool OD
(in.) (mm)
2-7/8
Standard Bridge Plug
H40135
2-7/8 in. 6.4-8.7 lb/ft
(73.0 mm 9.5-12.9 kg/m)
10,000 (689.5) above
8,000 (551.6) below
70-350 (21.1-176.7)
2.113 (53.67)
Casing Size
Reference (in.)
Type
Product Family No.
Casing Range
Pressure Rating
(psi) (bar)
Temperature Range
(°F) (°C)
Max Tool OD
(in.) (mm)
3-1/2
Standard Bridge Plug
H40135
3-1/2 in. 12.95 lb/ft
(88.9 mm 19.27 kg/m)
10,000 (689.5) above
8,000 (551.6) below
70-350 (21.1-176.7)
2.400 (60.96)
Casing Size
Reference (in.)
Type
Product Family No.
Casing Range
Pressure Rating
(psi) (bar)
Temperature Range
(°F) (°C)
Max Tool OD
(in.) (mm)
3-1/2
Standard Bridge Plug
H40135
2.550 (64.77)
Standard Bridge Plug
H40135
6,000 (413.7) above
5,000 (344.7) below
10,000 (689.5) above
8,000 (551.6) below
70-300 (21.1-148.9)
3-1/2
3-1/2 in. 7.7 lb/ft
(88.9 mm 11.5 kg/m)
3-1/2 in. 9.3-12.95 lb/ft
(88.9 mm 13.8-19.27 kg/m)
70-350 (21.1-176.7)
2.550 (64.77)
Casing Size
Reference (in.)
Type
Product Family No.
Casing Range
Pressure Rating
(psi) (bar)
Temperature Range
(°F) (°C)
Max Tool OD
(in.) (mm)
4-1/2
Hi-Value Frac Plug
H40036
6,000 (413.7) above
Tool Size: 240
Tool Size: 255
Tool Size: 340
4-1/2
Hi-Value Bridge Plug
H40136
4-1/2
3.0 Frac Plug
H40037
4-1/2 in. 13.5-15.1 lb/ft
(114.3 mm 20.1-22.5 kg/m)
4-1/2 in. 13.5-15.1 lb/ft
(114.3 mm 20.1-22.5 kg/m)
4-1/2 in. 15.1-18.8 lb/ft
(114.3 mm 22.5-27.9 kg/m)
4-1/2 in. 15.1-18.8 lb/ft
(114.3 mm 22.5-27.9 kg/m)
4-1/2 in. 15.1-18.8 lb/ft
(114.3 mm 22.5-27.9 kg/m)
70-250 (21.1-121.1)
3.400 (86.4)
6,000 (413.7) above
6,000 (413.7) below
70-250 (21.1-121.1)
3.400 (86.4)
10,000 (689.5) above
70-325 (21.1-162.8)
3.400 (86.4)
70-325 (21.1-162.8)
3.400 (86.4)
250-425 (121.1-218.3)
3.400 (86.4)
10,000 (689.5) above
10,000 (689.5) below
12,500 (861.8) above
12,500 (861.8) below
4-1/2
3.0 Bridge Plug
H40132
4-1/2
HPHT Bridge Plug
H40138
Type
Product Family No.
Casing Range
Pressure Rating
(psi) (bar)
Temperature Range
(°F) (°C)
Max Tool OD
(in.) (mm)
12,500 * (861.8) above
12,500 * (861.8) below
12,500 (861.8) above
12,500 (861.8) below
200-425
(93.3-218.3)
3.595 (91.3)
Tool Size: 360
Casing Size
Reference (in.)
4-1/2 - 5
HPHT Bridge Plug
H40138
4-1/2 in. 11.6-15.1 lb/ft
(114.3 mm 17.2-22.5 kg/m)
5 in. 23.2 lb/ft
(127 mm 34.5 kg/m)
4-1/2 - 5
HPHT Frac Plug
H40039
4-1/2 in. 11.6-15.1 lb/ft
(114.3 mm 17.2-22.5 kg/m);
5 in. 23.2 lb/ft (127 mm 34.5 kg/m)
12,000 (861.8) above
200-425
(93.3-218.3)
3.595 (91.3)
4-1/2 - 5
Standard Bridge Plug
H40135
4-1/2 in. 11.6-16.6 lb/ft
(114.3 mm 17.3-24.7 kg/m);
5 in. 23.2 lb/ft (127 mm 34.5 kg/m)
10,000 (689.5) above
7,500 (517.1) below
70-350
(21.1-176.7)
3.595 (91.3)
4-1/2 - 5
3.0 Bridge Plug
H40132
4-1/2 in. 11.6-16.6 lb/ft
(114.3 mm 17.3-24.7 kg/m);
5 in. 23.2 lb/ft (127 mm 34.5 kg/m)
10,000 (689.5) above
7,500 (517.1) below
70-325
(21.1-162.8)
3.595 (91.3)
4-1/2 - 5
3.0 Frac Plug
H40037
4-1/2 in. 11.6-16.6 lb/ft
(114.3 mm 17.3-24.7 kg/m);
5 in. 23.2 lb/ft (127 mm 34.5 kg/m)
10,000 (689.5) above
70-350
(21.1-176.7)
4-1/2
Hi-Value Bridge Plug
H40136
4-1/2
Hi-Value Frac Plug
H40036
4-1/2
Hi-Value Ball Type
Frac Plug
H40041
4-1/2 in. 9.5-16.6 lb/ft
(114.3 mm 14.1-24.7 kg/m)
4-1/2 in. 9.5-16.6 lb/ft
(114.3 mm 14.1-24.7 kg/m)
4-1/2 in. 9.5-16.6 lb/ft
(114.3 mm 14.1-24.7 kg/m)
8,000 (551.6) above
5,000 (344.7) below
9,000 (620.5) above
8,000 (551.6) above
70-275
(21.1-135)
70-250
(21.1-121.1)
70-275
(21.1-135)
3.595 (91.3)
3.595 (91.3)
3.595 (91.3)
3.595 (91.3)
* 10,000 psi above and below at 450°F
45
Drillable Products
Tool Size: 370
Casing Size
Reference (in.)
4-1/2
Type
FastFrac Bridge Plug
Product Family No.
Casing Range
H40139
4-1/2 in. 9.5-13.5 lb/ft
(114.3 mm 14.1-20.1 kg/m)
Pressure Rating
(psi) (bar)
Temperature Range
(°F) (°C)
3,000 (206.8) above
2,000 (137.8) below
70-200
(21.1-93.3)
5,000 (344.7) 2 hours above
70-150
(21.1-65.5)
Max Tool OD
(in.) (mm)
3.700
(94.0)
Tool Size: 385
Casing Size
Reference (in.)
Type
Product Family No.
Casing Range
Pressure Rating
(psi) (bar)
Temperature Range
(°F) (°C)
Max Tool OD
(in.) (mm)
HPHT Bridge Plug
H40138
5 in. 18.0-21.4 lb/ft
(127.0 mm 26.8-31.8 kg/m)
12,500 (861.8) above
12,500 (861.8) below
200-425
(93.3-218.3)
3.850
(97.8)
HPHT Frac Plug
H40039
5 in. 18.0-21.4 lb/ft
(127.0 mm 26.8-31.8 kg/m)
12,000 (827.4) above
12,000 (827.4) above
200-425
(93.3-218.3)
3.850
(97.8)
5
* For duration ratings contact R&S AEG or composite technical support group.
Tool Size: 438
Casing Size
Reference (in.)
Type
Product Family No.
Casing Range
Pressure Rating
(psi) (bar)
Temperature Range
(°F) (°C)
Max Tool OD
(in.) (mm)
3.0 Bridge Plug
H40132
5-1/2 in. 15.5-23.0 lb/ft
(139.7 mm 23.1-34.2 kg/m)
7,500 (517.1) above
7,500 (517.1) below
70-325
(21.1-162.8)
4.375
(111.125)
3.0 Frac Plug
H40037
5-1/2 in. 15.5-23.0 lb/ft
(139.7 mm 23.1-34.2 kg/m)
8,500 (586.1) above
70-325
(21.1-162.8)
4.375
(111.125)
CIC Bridge Plug
H40135
5-1/2 in. 15.5-23.0 lb/ft
(139.7 mm 23.1-34.2 kg/m)
10,000 (689.5) above
7,500 (517.1) below
70-325
(21.1-162.8)
4.375
(111.125)
CIC Frac Plug
H40033
5-1/2 in. 15.5-23.0 lb/ft
(139.7 mm 23.1-34.2 kg/m)
10,000 (689.5) above
70-325
(21.1-162.8)
4.375
(111.125)
Hi-Value Bridge Plug
H40136
5-1/2 in. 15.5-20.0 lb/ft
(139.7 mm 23.1-29.8 kg/m)
7,000 (482.6) above
5,000 (344.7) below
70-225
(21.1-107.2)
4.375
(111.125)
Hi-Value Frac Plug
H40036
5-1/2 in. 15.5-20.0 lb/ft
(139.7 mm 23.1-29.8 kg/m)
8,000 (551.6) above
70-225
(21.1-107.2)
4.375
(111.125)
Type
Product Family No.
Casing Range
Pressure Rating
(psi) (bar)
Temperature Range
(°F) (°C)
Max Tool OD
(in.) (mm)
H40139
5-1/2 in. 14.0-20.0 lb/ft
(139.7 mm 20.8-29.7 kg/m)
3,000 (206.8) above
2,000 (137.8) below
70-200
(21.1-93.3)
5,000 (344.7) 2 hours above
70-150
(21.1-65.5)
5-1/2
Tool Size: 450
Casing Size
Reference (in.)
5-1/2
FastFrac Bridge Plug
4.500
(114.3)
Tool Size: 455
Casing Size
Reference (in.)
Type
Product Family No.
Casing Range
Pressure Rating
(psi) (bar)
Temperature Range
(°F) (°C)
Max Tool OD
(in.) (mm)
Hi-Value Poppet
Style Frac Plug
H40036
5-1/2 in. 17.0 lb/ft
(139.7 mm 25.3 kg/m)
7,500 (517.1) above
70-200
(21.1-93.3)
4.550
(115.6)
Hi-Value Ball
Type Frac Plug
H40041
5-1/2 in. 15.5-20.0 lb/ft
(139.7 mm 23.1-29.8 kg/m)
8,000 (551.6) above
70-200
(21.1-93.3)
4.550
(115.6)
Type
Product Family No.
Casing Range
Pressure Rating
(psi) (bar)
Temperature Range
(°F) (°C)
Max Tool OD
(in.) (mm)
CIM Bridge Plug
H40137
7 in. 23.0-32.0 lb/ft
(177.8 mm 34.2-47.6 kg/m)
7,500 (517.1) above
5,000 (344.7) below
70-275
(21.1-135)
5.750
(146.05)
CIM Frac Plug
H40038
7 in. 23.0-32.0 lb/ft
(177.8 mm 34.2-47.6 kg/m)
7,500 (517.1) above
70-300
(21.1-148.9)
5.750
(146.05)
5-1/2
Tool Size: 575
Casing Size
Reference (in.)
7
46
Drillable Products
Typical Application for the QUIK Drill Composite Frac Plug
The frac plug is similar to the bridge plug but has a one-way valve that allows production to flow from below the frac plug to surface
but seals off for stimulation operations on zones above the frac plug.
Perforate, treat and
flowback Zone 1
Isolate Zone 1 with QUIK Drill™
Composite Frac Plug
Perforate and treat Zone 2
Commingled production flowback
from all zones in wellbore
Commingled production
flowback from Zones 1 and 2
QUIK Drill Milling Assembly used
for under-balanced removal
Isolate Zone 2 with QUIK Drill
Composite Frac Plug
Perforate and treat Zone 3
QUIK Drill Frac Plugs removed
and formation damage avoided,
maintaining a clean wellbore
47
Drillable Products
Operator’s Objective: Discretely treat two or more zones having varying bottomhole pressures (BHP) while
minimizing formation damage
Solution: Use Baker Hughes QUIK Drill composite bridge plug to isolate zones of interest and enable
removal in an under-balanced environment
Procedure: Step 1 - Install QUIK Drill under pressure
Step 2 - Perform treating operations
Step 3 - Remove QUIK Drill with coiled tubing under pressure
Zone 1: BHP is 11.4 lb/g equivalent
Zone 2: BHP is 8.8 lb/g equivalent
Zone 3: BHP is 10.2 lb/g equivalent
Zone 1 has been perforated
and treated, then isolated with
QUIK Drill without kill-weight fluids
Zone 2 has been perforated
and treated, then isolated with
QUIK Drill without kill-weight fluids
Zone 3 has been
perforated and treated
Operator’s Objective: Put well on production
Solution: Utilize Baker Hughes fishing services expertise to quickly and efficiently remove QUIK Drill
Procedure: Utilize downhole motor and milling tools conveyed on coiled tubing
Run Baker Hughes
QUIK Drill Milling Assembly
48
Unique dual clutching mechanism
prevents plugs from spinning
during milling operations
Low density composite cuttings
are easily removed with clear
fluids at low annular
QUIK Drill removed and
formation damage avoided,
maintaining a clean wellbore
Drillable Products
TV-10 Bridge Plug
Product Family No. H40183
APPLICATION
The TV-10™ bridge plug is an ideal wellbore plugging device for temporary or permanent
well abandonment. With the TV-10’s increased performance ratings, this bridge plug is
the ultimate tool for testing, treating, squeezing, or most any other plugging operation.
The TV-10 has been rigorously tested to provide the maximum pressure differential and
temperature rating available from a cast iron bridge plug: 10,000 psi (689 bar) (from
above and below) at 350°F (177°C).
The TV-10 is top venting during drillout. The top venting feature of the plug tallows
pressure from below to equalize above the plug before the top slips are removed by mill
out. With the top slips intact during pressure equalization, the plug will not be allowed
to travel up the hole with pressure build up from lower zones.
The backup rings of the TV-10 are specially designed to prevent element extrusion
during extreme pressure reversals. Also, the body lock ring traps the setting force
created by the setting tool into the packing element to keep it packed-off during
high-pressure applications.
The TV-10 is designed with a small OD and swab resistant packing element configuration
for easy run-in on wireline. The TV-10 can also be set hydraulically as well as on wireline.
tV-10 Bridge plug
Product Family No. H40183
49
Drillable Products
N-1 Bridge Plug
Product Family No. H40120 (Wireline Set)
Product Family No. H40122 (Mechanical Set)
APPLICATION
The N-1™ bridge plug is a high performance drillable bridge plug suitable for almost
any temporary or permanent plugging operation. The plug is constructed from select
materials which provide a combination of strength and drillability. It can be converted
to a K-1™ cement retainer by changing out the guide and replacing the bridging plug
with the correct valve assembly.
Features/Benefits
„„Easily
convertible from wireline set to mechanical set by adding a shear
screw and changing the upper slip
„„Swab resistant element design allows faster run-in speed
„„Constructed from readily drillable materials to minimize drillout time
NC-1 Bridge Plug
n-1 mechanical
Set Bridge plug
Product Family No. H40122
Product Family No. H40121 (Wireline Set)
Product Family No. H40123 (Mechanical Set)
APPLICATION
The NC-1™ bridge plug, a modified “top venting” N-1, is for use primarily in gas wells.
The design of the bridge plug allows the upper portion of the body and the bridging
plug to be drilled out, permitting pressure equalization across the tool before drilling
out the upper slips. A shear ring mechanism is used in the wireline set to minimize the
amount of material to be drilled out by the center of the drill bit.
Packing Element Selection for N-1, TV-10, S
and NC-1 Bridge Plugs
APPLICATION
The N-1, TV-10™, S™ and NC-1 bridge plugs are available with two different
durometer packing elements for oilfield use. For well temperatures up to
225°F (107.22°C), a 70 Hd packing element can be used. For well conditions from
100°F (37.77°C) — 400°F (204.44°C), a 90 Hd packing element is recommended.
For geothermal applications (no hydrocarbons present), a special 500°F (260°C)
thermal service element is available for most sizes of N-1 bridge plugs. It has been
successfully run in steam wells up to 500°F (260°C).
50
nc-1 Wireline
Set Bridge plug
Product Family No. H40121
Drillable Products
N, N-2 and N-3 Tubing Size Bridge Plugs
Product Family Nos. H40103, and H40115
APPLICATION
The N™, N-2™ and N-3™ bridge plugs are bridge plugs ideal for tubingless completion
applications. The plugs incorporate the same solid slips and swab proof packing
element system with positive anti-extrusion backup rings as used on the conventional
bridge plugs. The N-3 contains a body lock ring to prevent movement of the body during
pressure reversals. The tubing size bridge plugs are available in different durometer
packing elements depending on the application.
Features/Benefits
„„Can
be set on wireline or coiled tubing setting tools
ring slips
„„Swab-proof element
„„Body lock ring design
„„10,000 psi (689 bar) pressure rating (excluding Size 023)
„„Solid
n and n-2 tubing Size
Bridge plugs
Product Family No. H40103
51
Drillable Products
HMN Bridge Plug
Product Family No. H40133
APPLICATION
The HMN™ bridge plug is a hydraulically actuated, mechanically set, cast iron drillable
bridge plug. The HMN bridge plug is a high-pressure, premium bridge plug that uses
the N-1™ bridge plug basic unit in its construction; therefore, the HMN has equivalent
operating specifications to the N-1 bridge plug.
The HMN bridge plug can be used for zone isolation for squeeze cementing,
fracturing, and temporary or permanent plug and abandonment operations. The
HMN bridge plug has been successfully tested to 10,000 psi (689 bar) from above
and below at temperatures up to 400°F (204°C) „. The HMN bridge plug can be run
and set in tandem with service packers or retrievable production packers, such as
the EA™ retrievamatic service packer or the R-3™ retrievable casing packer.
The N-1 wireline set bridge plug (product family no. H40120) and K-1™ wireline set
cement retainer (product family no. H40023) can be converted to a HMN bridge plug
using the HMN adapter kit (product family no. H40161).
Features/Benefits
„„Setting
mechanism and control are self-contained in the bridge plug to
eliminate the need for a complex redress of a mechanical setting tool
„„Full tubing bore is available for unobstructed passage of fluids and
wireline perforating and logging equipment after the plug is set and
the tubing is released
„„The HMN is top equalizing during drill out which assures a safe drill
out without the plug coming up the hole due to pressures contained
below the plug
„„Material used in the construction of the HMN will securely pack off
and grip inside Q125 grade casing and yet may be quickly drilled out
with conventional rotary drilling bits or percussion drilling tools
„„Eliminates the expense of electric line equipment and rental charges
required on other high performance bridge plugs
„„Sealing elastomers are available on request for H2S service, CO2 service
and gas sealing applications
„„HMN adapter kits are available for field conversions to modify a standard
wireline set N-1 bridge plug or K-1 wireline cement retainer
„„The HMN has a temperature rating of 400°F (204°C) „ when equipped
with 90HD nitrile packing elements
„
For geothermal applications (no hydrocarbons present), a special “500°F (260°C). Thermal Service”
element is available for most sizes of N-1 bridge plugs. It has been successfully run in steam wells up
to 500°F (260°C).
Hmn Bridge plug
Product Family No. H40133
52
Drillable Products
Specification Guide
Cast Iron Bridge Plugs
Casing
OD
Product Model
Availability
Weight (T&C)
in.
mm
lb/ft
kg/m
2-3/8
60.3
2-7/8
73.0
4.0-5.8
11.0-11.65
7.9-10.7
6.4-6.5
15.68-16.81
5.9-8.6
16.4-17.3
11.8-15.9
9.5-9.7
23.3-25.0
88.9
9.3-13.3
13.8-19.8
4
101.6
5.75-9.3
5.6-14
8.6-13.8
8.3-20.8
4-1/2
114.3
9.5-16.6
14.1-24.7
23.2-29.2
34.5-43.4
11.5-20.8
17.1-31.0
3-1/2
5
5-1/2
6
6-5/8
7
127.0
139.7
152.4
168.3
177.8
14-23
19.3-34.2
14-26
14-26
20.8-38.7
20.8-38.7
10.5-12
15.6-17.9
17-34
25.3-50.6
32-44
47.6-65.5
17-35
25.3-52.1
20-38
29.8-56.6
Plug OD
Size
in.
mm
1.750
1.750
1.968
2.220
2.220
2.562
44.5
44.5
50.0
56.4
56.4
65.1
2.765
70.2
3.140
79.8
3.593
91.3
1AA
3.592
3.610
91.2
91.7
N-1
S
NC-1
HMN
1BB
3.937
100.0
N-1
S
NC-1
HMN
BM p
TV-10
2AA
4.312
109.5
2BB
4.325
4.937
109.9
125.4
3AA
5.410
137.4
3AA
5.410
137.4
3AA
5.410
137.4
3BB
5.687
144.4
N
N
N-3
N-3
N-2
N-2
N-1 X
HMN
BM p
NC-1
TV-10
TV-10
N-1
NC-1
HMN
N-1
S
NC-1
HMN
N-1
S
NC-1
HMN
TV-10
023
023
027
028
028
033
035
035 l
040
1AA
7-5/8
193.7
20-39
29.8-58.0
N-1
NC-1
HMN
4AA
6.312
160.3
8-5/8
219.1
24-29
35.7-72.9
N-1
NC-1
HMN
5AA
7.125
180.9
9-5/8
244.5
29.3-53.5
43.6-79.6
N-1
NC-1
HMN
6AA
8.125
206.3
60.7-81
90.3-120.5
9.000
228.6
247.6
N-1
NC-1
HMN
N-1
NC-1
HMN
6BB
10-3/4
7AA
9.437
239.7
7BB
9.937
252.4
8AA
10.437
265.1
N-1
NC-1
HMN
8BB
11.562
293.7
9AA
12.000
304.8
N-1
NC-1
11AA
11BB
13.915
14.585
353.4
370.5
11-3/4
13-3/8
16
298.5
337.7
406.4
32.75-60.7
48.7-90.3
60-83
89.3-123.5
38-60
56.5-89.3
85-102
126.5-151.8
48-72
74.1-107.1
109-146
55-84
162.9-217.2
81.8-125.0
X In 4-1/2 in.
(114.3 mm)
9.5 lb (14.1
kg/m) casing,
when a no.
10 setting tool is not available, a size 20 setting tool and size 2AA adapter
p
l
kit may be used when well conditions permit.
BM stands for BridgeMaster.
Uses a Size 10 setting tool.
53
Drillable Products
Drillable Cement Retainers
The company that gave the oil and gas industry its first drillable
cement retainer continues to market the best tools available for
single interval squeeze, batch, or block squeeze cementing. As a
result of extensive engineering tests and years of experience, the
workover systems line of drillable cement retainers are constructed
of components subject to stringent material specifications and quality
control procedures to provide optimum strength in combination
with maximum drillability. With a wide range of sizes available,
workover systems can offer drillable cement retainers for tubing and
casing size applications, along with the versatility to utilize tubing,
coiled tubing or wireline conveyance methods. The drillable cement
retainers provide a fail-safe barrier for plug and abandonment
projects as well as many types of pressure pumping application
requirements. The drillable cement retainers keep hydrostatic
pressure off the zone that has been squeezed which can be important
for cementing in low fluid level wells in batch squeeze operations.
Specification Guide
drillable cement Retainer conveyance
Drillable Cement Retainer Model Type
Conveyance
Method
K-1™
N™
B-1™
H-1™
Wireline Set
Yes
Yes
No
No
Coiled Tubing Set
Yes
Yes
Yes
Yes
Threaded
Pipe, Tubing or
Drillpipe Set
Yes
No
No
Yes
Squeeze Tool
K-1™ Setting Tool KL™
Control with B™ Stinger
Sub CT™ Setting Tool Stinger
Stinger
Sub
C™ Setting
Tool
Stinger
Sub
Tubing
Tubing
Coiled Tubing or
Threaded Pipe
KL™ Control Unit
E-4™ WLPSA
K-1™ Snap-Latch
Setting Tool
Set-N-Squeeze
Hydraulic Setting Tool
B™ Snap-Latch
Stinger Sub
Wireline
Adapter Kit
K-1™ Wireline Set
Cement Retainer
54
K-1 Wireline Set
Cement Retainer
K-1 Mechanical
Set Cement Retainer
K-1 Wireline Set
Cement Retainer
Drillable Products
Composite Cement Retainer and
Set-N-Squeeze Hydraulic Setting Tool
Product Family Nos. H40060 and H40040
APPLICATION
The new hydraulic setting tool and composite cement retainer will allow for hydraulic
setting of the composite cement retainer and secondary cementing operations in one
trip. The hydraulic setting tool is ideal for directional, deviated, and horizontal wells.
No rotation is required to set or release from the cement retainer. Simply pressure up
with a setting ball on seat to set the cement retainer and then pick up to close the
valve and sting out of the retainer. Cement can be displaced in the work string at this
point. Slack off to sting back in your retainer and pump away your cement.
The composite cement retainer can be drilled out using a PDC bit which can then
proceed into the formation.
Features/Benefits
„„Robust
performance–design material specifications ensure superior
pressure and temperature ratings while maintaining easy drill out with
PDC or workover bit
„„One-trip system — hydraulically sets tool with pressure and functions as a
stinger for subsequent cementing operations
„„Large slip contact area on retainer effectively bites into casing and keeps
the plug from moving
„„Snap latch feature latches into the retainer with setdown weight and is
released with tension
„„Controls retainer valve — the stinger opens the sleeve valve with setdown
weight and closes it with upstrain
„„Tubing pressure test is possible with latch sleeve valve retainers by pulling
up to close retainer valve prior to snapping out of retainer
composite cement Retainer
and Hydraulic Setting tool
Product Family Nos.
H40060 and H40040
55
Drillable Products
K-1 Cement Retainer
Product Family No. H40021 (Mechanical Set)
Product Family No. H40023 (Wireline Set)
APPLICATION
The K-1™ cement retainer is the most versatile squeeze tool in the industry. The
K-1 is available in most casing sizes and has an optional sliding valve or flapper
valve pressure containment device. The K-1 can be set on wireline or threaded pipe
utilizing Baker Hughes successful line of setting tools.
The K-1 cement retainer’s two-way valve is controlled from the surface; no springs
to cock or stick; just pick up to close; set down to open. Maximum clearance for fast
running plus improved drillability and pressure ratings make it the right choice.
Features/Benefits
„„Tubing
or electric line set — can be set by mechanical or hydraulic
methods on tubing or drillpipe or run and set on electric line
„„Faster, safer run-in–run-in speed is up to the operator — Baker Hughes’
locked construction design and larger clearance make this possible
„„Tests tubing–tubing can be tested before squeezing by picking up to close
the valve and applying pressure
„„Holds final squeeze pressure — automatic closing of the valve when
picking up or removal of stinger, ensures holding the squeeze under final
pressure as cement is circulated out
„„Isolates squeeze from hydrostatic pressure — keeping hydrostatic
pressure off the zone just squeezed is important, especially for cementing
low-fluid-level wells in batch-squeeze operations–Baker Hughes’ unique
valve guarantees an effective seal
„„Fast drillout–new material specifications developed especially for the
K-1 cement retainers result in faster drillout
K-1 Wireline Set cement
Retainer with Sliding Valve
Product Family No. H40023
Element Selection for K-1 Cement Retainers
APPLICATION
The K-1 cement retainer is available with two different durometer packing elements
for oilfield use. For well temperatures up to 225°F (107.22°C) a 70 Hd packing element
can be used. For well conditions from 100°F (37.78°C) — 400°F (204.44°C) a 90 Hd
packing element is recommended.
K-1 Wireline Set cement
Retainer with flapper Valve
Product Family No. H40024
56
Drillable Products
H-1 Tubing Size Cement Retainer
Product Family No. H40011
APPLICATION
The H-1™ cement retainer is designed to provide a back-pressure valve that actuates independently of
tubing movement and may be used in tubingless completions. The cement retainer is run in and set
quickly, accurately, and economically, using a Baker Hughes wireline pressure setting assembly and
wireline adapter kit.
To decrease the possibility of premature setting while running in the hole, the tool incorporates the
same solid ring slips and swab-proof packing element system with positive anti-extrusion backup rings
as used in the conventional Baker Hughes cement retainers.
Features/Benefits
„„Tubing
size wireline set
and seat type valve holds pressure from below retainer
„„Bakelite ball capable of withstanding high flow rates
„„Locked construction for fast, safe run-in
„„Millable design
„„Ball
H-1 tubing Size cement Retainer
Product Family No. H40011
B-1 Tubing Size Cement Retainer
Product Family No. H40007
APPLICATION
The B-1™ mechanical set cement retainer is designed to provide a back-pressure valve that actuates
independently of tubing movement and may be used in tubingless completions. As the slips are
mechanically set, pressure differential in favor of the tubing does not affect the packing element or
upper lips while running in.
Features/Benefits
„„Tubing
size mechanical set
„„One-trip operation; tubing can be left in the Retainer after setting for completing
subsequent cementing operations
„„Easily converted to a mechanical set bridge plug or to include a bridging ball seat
„„Back pressure valve can be tripped at any time, to prevent tubing overflow, or to control
the tubing without setting the cement retainer, in case of a blowout
B-1 tubing Size cement Retainer
Product Family No. H40007
57
Drillable Products
Big Bore Cement Retainers
Product Family No. H40024
APPLICATION
The size 4AA and 6AA Big Bore flapper valve K-1 wireline
cement retainer was designed to provide a large enough bore
through the retainer/setting tool to run thru-tubing perforating
guns and/or coiled tubing below the retainer.
The primary application for the Big Bore retainer is for plug
and abandonment operations. If cement can not be pumped,
more squeeze perforations can be shot using thru-tubing
perforating guns.
The Big Bore retainer is run and operates similarly to the
standard size K-1 flapper valve wireline cement retainers
(product family no. H40024). A special wireline adapter kit and
special K-1 snap-latch setting tool (product family no. H40069)
are required.
Big Bore cement Retainer
Product Family No. H40024
Specification Guide
Features/Benefits
bore cement retainer accommodates
1.75 in. (44.5 mm) ID stinger subs
„„Thru-tubing guns and/or coiled tubing can be
run through the retainer/stinger for special
cementing applications
„„For plug and abandonment, pump cement, or
drilling mud at higher rates through larger bores
cement Retainers
„„Large
N Tubing Size Cement Retainer
Product Family No. H40026
APPLICATION
The N™ cement retainers are tubing size wireline set cement
retainer. A simple ball and seat style valve snaps closed with the
aid of spring force and a pump out sub gives positive indication
when stung into the retainer. Tubing can be pressure tested
before pumping cement. The cement retainer is wireline set
using the dependable E-4™ setting tool and uses the same rugged
construction as the N bridge plug (product family no. H40120).
n tubing Size cement Retainer
Product Family No. H40026
Casing
OD
in.
2-3/8
2-7/8
2-7/8
2-7/8
2-7/8
2-7/8
3-1/2
3-1/2
3-1/2
3-1/2
4
4-1/2 X
5
5-1/2
6
6
6-5/8
7
7
7-5/8
8-5/8
9-5/8
10-3/4
10-3/4
11-3/4
11-3/4
13-3/8
13-3/8
16
16
Weight (T&C)
mm
lb/ft
kg/m
Product
Model
Availability
Size
60.3
4.0-5.8
6.0-8.6
N™
023
73.0 11.0-11.65
16.4-17.3
N
23
73.0
7.9-10.7
11.8-15.9
N
027
73.0
6.4-6.5
9.5-9.7
B-1™
028
73.0
6.4-6.5
9.5-9.7
H-1™
020
73.0
6.4-6.5
9.5-9.7
N
028
88.9 15.68-16.81 23.3-25.0
N
28
88.9
10.3-13.3
15.3-19.8
H-1
033
88.9
5.7-9.3
13.8-19.8
B-1
035
88.9
5.7-9.3
13.8-19.8
H-1
035
101.6
5.6-14
8.3-20.8
B-1, H-1
040
114.3
9.5-16.6
14.1-24.7
K-1
1AA
127.0 11.5-20.8
17.1-31.0
K-1
1BB
139.7
14-23
19.3-34.2
K-1
2AA
152.4
14-26
20.8-38.7
K-1
2BB
152.4
10.5-12
15.6-17.9
K-1
3AA
168.3
17-34
25.3-50.6
K-1
3AA
177.8
32-44
47.6-65.5
K-1
3AA
177.8
17-35
25.3-52.1
K-1
3BB
193.7
20-39
29.8-58.0 K-1, Big Bore 4AA
219.1
24-29
35.7-72.9
K-1
5AA
244.5 29.3-53.5
43.6-79.6 K-1, Big Bore 6AA
247.6
60.7-81
90.3-120.5
K-1
6BB
247.6 32.75-60.7
48.7-90.3
K-1
7AA
298.5
60-83
89.3-123.5
K-1
7BB
298.5
38-60
56.5-89.3
K-1
8AA
337.7
85-102
126.5-151.8
K-1
8BB
337.7
48-72
74.1-107.1
K-1
9AA
406.4
109-146
162.9-217.2
K-1
11AA
406.4
55-84
81.8-125.0
K-1
11BB
Plug OD
in.
mm
1.750
1.750
1.968
2.218
2.200
2.200
2.200
2.562
2.812
2.765
3.140
3.593
3.937
4.312
4.937
5.410
5.410
5.410
5.687
6.312
7.125
8.125
9.000
9.437
9.937
10.437
11.562
12.000
13.915
14.585
44.5
44.5
50.0
56.3
55.9
55.9
55.9
65.1
71.4
70.2
79.8
91.3
100.0
109.5
125.4
137.4
137.4
137.4
144.4
160.3
180.9
206.3
228.6
239.7
252.4
265.1
293.7
304.8
353.4
370.5
X In 4-1/2 in. (114.3 mm) 9.5 lb (14.1 kg/m) casing, when a no. 10 setting tool
is not azvailable, a size 20 setting tool and size 2AA adapter kit may be used
when well conditions permit.
58
Drillable Products
Offshore Drillables Basket*
APPLICATION
The drillables basket was developed for markets where
time is a critical issue. The drillables basket allows the
operator to have a certified container of drillable equipment
for different sizes and conveyance methods to reduce the
amount of time waiting for replacement tools to arrive
on location.
The drillables basket has one specially built tool basket that
efficiently carries all equipment and accessories, and keeping
the tools together. The size of the tool basket is not only
compact for ease of transport to and from the rig, but also
has the capacity to contain multiple plugs and setting tools.
The drillables basket has available setting tools that allow the cement
retainers and bridge plugs to be set mechanically or on wireline. No
matter what the well condition dictates, all options are available on
board. The drillables basket has a standardized offshore package that
can also be expanded to fit the needs and applications of the customer.
Features/Benefits
„„Purpose design basket
„„Two high-pressure, high-temperature products with conversions
„„On-site conversion kits and setting tools
„„Two methods of product deployment on board
„„No lost time waiting
The drillables basket comes with two high-pressure, hightemperature drillable cement retainers with two bridge plug
conversion kits available at all times which gives two options
for the price of one.
„„Optimum basket design
„„Standardized package
„„Reduces storage space required
„„Rig time savings
*Limited area availability.
59
60
S e t t i n g To o l s , S t i n g e r
Subs, and Wireline
Setting Tools, Stinger Subs, and Wireline Accessories
The workover systems complete line of reliable setting tools
allow Baker Hughes products to be set on wireline, coiled
tubing, and threaded pipe. The field-proven design of our setting
tools assures a complete and successful set of downhole
equipment such as bridge plugs and cement retainers. The
setting tools were specifically designed to set Baker Hughes
downhole products for varying applications from zone isolation
to plug and abandonment campaigns.
The array of stinger subs available incorporate a snap-in, snap-out,
type latch which provides surface indication of the stinger being
landed in the cement retainer giving assurance that the valve is
open or closed. The stinger subs also incorporate a seal system
that assures a pressure tight barrier between the stinger and the
retainer for maximum pressure application below the retainer.
The available wireline accessories can assist in wireline
applications ranging from determining if the wellbore is
large enough to permit subsequent passage of wireline
tools to cleaning junk and debris from the wellbore. The
wireline accessories are available in a variety of sizes for
all wireline needs.
Tubing
Coiled Tubing or
Threaded Pipe
KL™ Control Unit
E-4™ WLSPA
B™ Snap-Latch
Stinger Sub
Set-N-Squeeze
Hydraulic Setting Tool
K-1™ Wireline Set
Cement Retainer
K-1™ Wireline Set
Cement Retainer
Wireline
Adapter Kit
N-1™ Wireline
Set Bridge Plug
61
S e t t i n g To o l s , S t i n g e r
Subs, and Wireline
K-1 Snap-Latch Setting Tool
Product Family No. H40069
APPLICATION
The K-1™ snap-latch setting tool is designed to reliably set a mechanical set K-1 cement retainer
(product family no. H40021) on tubing. The K-1 setting tool can also be converted to set a mechanical
set N-1™ bridge plug (product family no. H40122). The setting tool can be easily converted to set
either the cement retainer or the bridge plug.
The setting tool uses a combination of right-hand rotation and upstrain to set the cement retainer and
bridge plugs. The tubing and cement retainer valve can easily be internally pressure tested before
cementing operations begin.
Since the setting sleeve is fully retracted after the cement retainer has been set, the K-1 setting
tool becomes the stinger sub for the cement retainer. The K-1 setting tool’s ability to be used as the
setting tool and stinger makes it ideal for one-trip cement operations.
J Hydraulic Setting Tool
Product Family No. H43719
APPLICATION
The J™ hydraulic setting tool is designed to set mechanical set bridge plugs on coiled tubing. The J is
available in the same sizes as the E-4™ wireline pressure setting assembly (WLPSA) and can be used in
place of the E-4 when applicable. The J uses the same adapter kits as the E-4 WLPSA.
K-1 Snap-Latch Setting tool
Product Family No. H40069
A setting ball is used to activate the setting tool; however, a non-ball operated system is available that
uses specific flow rates to operate the tool.
The J can be run in high angle or deviated wells where wireline setting is extremely difficult or
impossible. The J is hydraulically balanced while running in the hole.
J Hydraulic Setting tool
Product Family No. H43719
62
S e t t i n g To o l s , S t i n g e r
Subs, and Wireline
CT Hydraulic Setting Tool
Product Family No. H40062
APPLICATION
The CT™ hydraulic setting tool allows the K-1™
cement retainer (product family no. H40023) to
be run in and hydraulically set on coiled tubing,
drillpipe or tubing. No rotation is required to set
or release from the cement retainer making the
CT setting tool ideal for coiled tubing applications
especially when working on offshore floaters or in
highly deviated wells. The CT setting tool enables
the operator to set the cement retainer and
squeeze cement in a single trip.
The CT setting tool also has the ability to set the
N-1™ bridge plug (product family no. H40120). When
running a bridge plug, the CT setting tool allows the
operator to spot cement on top of the bridge plug
and/or circulate change out or clean up fluid.
Features/Benefits
„„Saves
rig time — one-trip system allows
cement retainers and bridge plugs to be
set and cemented in a single trip
„„No rotation required–uses only
applied pressure to set and release
from a cement retainer or bridge plug
making it ideal for coiled tubing, highly
deviated and horizontal applications
„„Designed for coiled tubing–can be
lubricated into a live well but can also
be run on threaded tubing or drillpipe
„„Controlled slow set–hydraulic
operation allows staging of applied
setting pressure
„„Collet snap latch–prevents premature
closure of sleeve valve
Three operational methods are available for
setting: (1) run a solid seat; (2) run a setting ball
in place; and (3) drop a setting ball from surface.
The ball seat (or solid seat) will automatically
expel after shearing the release device allowing
the ball seat to be pumped down past the
ports in the stinger. The ball seat cannot be
pumped out until the setting sequence has been
completed and shear screws may be installed
to prevent premature setting of the tool while
running in the hole. An integral collet snap latch
device on the setting tool aids in coiled tubing
applications to prevent premature closure of the
sleeve valve due to hydraulics.
Specification Guide
CT Hydraulic Setting Tool
Casing
OD
Weight (T&C)
K-1™
Cement
Retainer
Size
CT™ Setting
Tool Size
1AA
1AA-2BB
Maximum OD
Minimum ID
With Ball
Seat
Minimum ID
Without
Ball Seat
Set and Release
Pressure
in.
mm
lb/ft
kg/m
4-1/2
114.3
9.5-16.6
14.1-24.7
in.
mm
in.
mm
in.
mm
psi
bar
3.625
92.1
0.390
9.9
0.750
19.1
2.500
172.3
5
127.0
11.5-20.8
17.1-31.0
1BB
1AA-2BB
4.015
101.9
0.390
9.9
0.750
19.1
2.500
172.3
5-1/2
139.7
13-23
19.3-34.2
2AA
1AA-2BB
4.500
114.3
0.390
9.9
0.750
19.1
2.500
172.3
6
152.4
14-26
20.8-38.7
2BB
1AA-2BB
5.062
128.6
0.390
9.9
0.750
19.1
2.500
172.3
6
152.4
10.5-12
15.6-17.9
3AA
3AA-9AA
5.375
136.5
0.562
14.3
1.000
25.4
4.200
289.4
6-5/8
168.3
17-34
25.3-50.6
3AA
3AA-9AA
5.375
136.5
0.562
14.3
1.000
25.4
4.200
289.4
7
177.8
32-44
47.6-65.5
3AA
3AA-9AA
5.375
136.5
0.562
14.3
1.000
25.4
4.200
289.4
7
177.8
17-35
25.3-52.1
3BB
3AA-9AA
5.375
136.5
0.562
14.3
1.000
25.4
4.200
289.4
7-5/8
193.7
20-39
29.8-58.0
4AA
3AA-9AA
6.300
160.0
0.562
14.3
1.000
25.4
4.200
289.4
8-5/8
219.1
24-49
35.7-72.9
5AA
3AA-9AA
7.000
177.8
0.562
14.3
1.000
25.4
4.200
289.4
9-5/8
244.5
29.3-53.5
43.6-79.6
6AA
3AA-9AA
8.000
203.2
0.562
14.3
1.000
25.4
4.200
289.4
10-3/4
247.6
60.7-81
90.3-120.5
6BB
3AA-9AA
9.000
228.6
0.562
14.3
1.000
25.4
4.200
289.4
10-3/4
247.6
32.7-60.7
48.7-90.3
7AA
3AA-9AA
9.420
239.3
0.562
14.3
1.000
25.4
4.200
289.4
11-3/4
298.5
60-83
89.3-123.5
7BB
3AA-9AA
9.920
251.9
0.562
14.3
1.000
25.4
4.200
289.4
11-3/4
298.5
38-60
56.5-89.3
8AA
3AA-9AA
10.420
264.7
0.562
14.3
1.000
25.4
4.200
289.4
13-3/8
337.7
85-102
126.5-151.8
8BB
3AA-9AA
11.500
292.1
0.562
14.3
1.000
25.4
4.200
289.4
13-3/8
337.7
48-72
74.1-107.1
9AA
3AA-9AA
11.750
298.5
0.562
14.3
1.000
25.4
4.200
289.4
CT Hydraulic Setting Tool
Product Family No. H40062
63
S e t t i n g To o l s , S t i n g e r
Subs, and Wireline
E-4 Wireline Pressure Setting Assembly, Sizes 05,10, and 20
Product Family No. H43702
APPLICATION
The E-4™ wireline pressure setting assembly (WLPSA) provides a sure, proven means for setting any
electric line set product, including bridge plugs, cement retainers, retainer production packers, and
other wireline set tools.
The assembly is a gas-generating tool used for the gradual development of hydraulic force required
to set bridge plugs, retainer production packers and cement retainers. The gas pressure required is
obtained by the electrical ignition of a BP-3S™ Igniter that activates the secondary igniter and the
power charge. The E-4 incorporates a disk bleeder valve to ensure safe and simple pressure bleed-off
prior to disassembly after being run.
The firing head connects the wireline pressure setting assembly to the collar locator on the electric
line, providing electrical ignition of the power charge through the primary and secondary igniters. The
top end is blank so threads can be machined to fit the electric wireline company’s collar locator. Firing
head sold separately.
E-5 Wireline Pressure Setting Assembly, Size 05
Product Family No. H43705
APPLICATION
The E-5™ wireline pressure setting assembly (WLPSA) is similar in application and design as the
E-4 WLPSA. The E-5 can withstand increased hydrostatic pressures and has increased maximum
output force.
Features/Benefits
„„Unique
design largely balances hydraulic areas affected by hydrostatic pressure
„„The E-5 uses a slow-set power charge; the standard E-4 WLPSA will not accept the
05 slow-set power charge
„„The new design allows for double the maximum setting force as compared to the
same size E-4 WLPSA
e-4 Wireline
pressure Setting assembly
Product Family No. H43702
64
S e t t i n g To o l s , S t i n g e r
Subs, and Wireline
E-4 HPHT, Size 10
Product Family No. H43704
APPLICATION
The E-4™ HPHT wireline pressure setting assembly (WLPSA) is a setting device in which the products
of combustion are used for the gradual development of force through pressure. This motive force
operates the various working parts of the WLPSA in a proper sequence to ensure the successful
setting of Baker Hughes bridge plugs, retainer production packers, cement retainers, and other
products to be deployed on wireline. The pressure required is built up through the burning of a
slow set power charge (product family no. H43766), or a standard power charge (product family no.
H43764). For specifics on all power charges and igniters refer to Tech Unit 4190, which can be found
at bakerhughesdirect.com. The setting pressure is confined to the proper area of the setting tool
through the use of high-performance o-ring seals with backup support. It is of extreme importance
that all o-rings be maintained in perfect condition and replaced after each use. The E-4 HPHT wireline
pressure setting assembly incorporates a piercing disk bleeder system to provide a safe, easy method
of bleeding off trapped pressure before disassembling the WLPSA after it has been run.
Features/Benefits
„„Used
to set Baker Hughes bridge plugs, cement retainers, and production packers on
electric wireline
„„Used in conjunction with a casing collar locator for correlation of exact setting depth
„„Uses the advantage of the fast running capability of wireline
„„Proven design has been the industry standard for many years
„„Temperature rating 450°F (232.2°C)
„„Pressure rating 25,000 psi (1723.6 bar)
„„High-performance sealing o-rings with backup support
„„Self-contained firing head built-into the HPHT WLPSA
„„Primary, secondary, and tertiary bleed-off methods for added safety
„„Corrosion-resistance piston mandrel
„„Ability to verify conductivity of firing head on location
e-4 HpHt, Size 10
Product Family No. H43704
65
S e t t i n g To o l s , S t i n g e r
Subs, and Wireline
B Snap-Latch Stinger Sub
Product Family No. H40092
APPLICATION
The B™ snap-latch stinger sub is used to pump through K-1™
wireline or mechanical set cement retainers. The B features a
snap-in, snap-out type latch that provides a surface indication
of the stinger being landed into or removed from a retainer. The
latch system allows the cement retainer valve to be opened and
closed while the stinger remains latched and sealed in the bore
of the retainer. This allows easy testing of the tubing before
pumping cement.
KL Control Unit
Product Family No. H43061
APPLICATION
The KL™ control unit is made up above the B snap-latch stinger
sub and provides a centralizing device for entering the cement
retainer bore.
B Snap-Latch Stinger Sub
Product Family No. H40092
66
KL control unit
Product Family No. H43061
S e t t i n g To o l s , S t i n g e r
Subs, and Wireline
H Wireline Feeler and Junk Catcher
Product Family No. H43901
APPLICATION
The H™ wireline feeler and junk catcher is run in the well to determine if the wellbore is large enough
to permit subsequent passage of the bridge plug, packer, or other tool that is to be run. In addition,
the feeler and junk catcher will serve to clean the well of junk that might interfere with the proper
setting or operation of the tool.
R Wireline Feeler and Junk Catcher
Product Family No. H43907
APPLICATION
The R™ wireline feeler and junk catcher is used to gauge and to clean junk and debris from a tubing
wellbore prior to running drillable products on an electric line. The guide on the basket is slightly
larger than the OD of the drillable product to be run, ensuring that the drillable product will reach
setting depth. A flapper valve in the bottom end of the basket will trap and retrieve junk and debris.
C Wireline Jar
Product Family No. H43944
APPLICATION
The C™ wireline jar is a mechanical-type jar and should always be run in conjunction with the
R wireline feeler and junk catcher. Threads are compatible; special crossover subs are not required.
Should the feeler and junk catcher become stuck due to junk or debris in the wellbore, the feeler
can be freed by actuating the jar. .
H Wireline feeler and Junk catcher
Product Family No. H43901
67
68
General Remedial
Equipment and Accessories
General Remedial Equipment
and Accessories
Tubing
The workover systems line of general remedial
equipment consists of the many types of casing
clean-up equipment, rod pumping equipment,
and other tools such as cementing manifolds,
swivels and collar locators. Continuing the
tradition of excellence in engineering, these
products were designed to improve the ease and
performance capabilities of existing workover
systems products to improve the life of a well.
Sucker Rod
Tubing Anchor
Catcher
Sucker Rod
Sucker Rod Pump
69
General Remedial
Equipment and Accessories
A-2 Sand-Line Drill
Product Family No. H74741
APPLICATION
The A-2™ sand-line drill provides a simple means of drilling out packers, cement, and other drillable
materials, often in less than one hour. It can also be used for drilling in openhole completions and
removing sand, gravel, junk, or other debris from the wellbore. Converting to a sand pump is as
simple as changing the shoes.
Features/Benefits
„„Connection
for cable-tool drilling line, service machine, or the sandline of a rotary rig
eliminates expensive surface equipment
„„Cuttings are picked up for maximum drilling efficiency
„„Full chisel shoe is for soft items such as cement and sand bridges — the 60% chisel
shoe is for harder objects such as cast iron plugs and packers
Specification Guide
a-2 Sand-Line drill
Casing
OD
Recommended Casing ID
Weight (T&C)
Minimum
Tool
Maximum
in.
mm
lb/ft
kg/m
in.
mm
in.
mm
2-7/8
73.0
4.7-6.5
7.0-9.7
2.347
59.6
2.923
74.2
3-1/2
88.9
5.75-9.3
8.6-13.8
2.923
74.2
3.920
4-1/2
114.3 9.5-13.5
14.1-20.1
3.920
99.6
4.669
Size
Bit
OD
in.
mm
28-35
2.000
50.8
99.6
28-35
2.000
118.6
43
3.500
Size
OD
in.
mm
28
2.188
55.6
50.8
35
2.750
69.9
88.9
43
3.750
95.3
95.3
5
127.0
11.5-21
17.1-31.2
3.920
99.6
4.669
118.6
43
3.500
88.9
43
3.750
5-1/2
139.7
13-23
19.3-34.2
3.920
99.6
4.669
118.6
43
3.500
88.9
43
3.750
95.3
6
152.4
15-26
22.3-38.7
4.670
118.6
5.855
148.7
45-47
4.000
101.6
45
4.500
114.3
6-5/8
168.3
28-32
41.7-47.6
4.670
118.6
5.855
148.7
45-47
4.000
101.6
45
4.500
114.3
6-5/8
168.3
17-26
25.3-38.7
4.670
118.6
5.855
148.7
45-47
4.000
101.6
45
4.500
114.3
7
177.8
17-38
25.3-56.5
5.855
148.7
7.125
181.0
45-47
4.000
101.6
47
5.656
143.7
7-5/8
193.7
2-39
29.8-58.0
5.855
148.7
7.125
181.0
45-47
4.000
101.6
47
5.656
143.7
8-5/8
219.1
24-49
35.7-72.9
7.511
190.8
8.097
205.7
49
7.000
177.8
49
7.250
184.2
a-2 Sand-Line drill
Product Family No. H74741
70
General Remedial
Equipment and Accessories
Pump Type Tubing Bailer
Product Family No. H74750
APPLICATION
The pump type tubing bailer allows sand and debris to be removed from
the wellbore of low fluid-level wells. The bailer is designed to function in
wells with as little as a few hundred feet of fluid. It replaces hydrostatic
bailers, which require several thousand feet for operation. Drilling can also
be performed with the bailer to remove cement crust or to drillout cast iron
plugs and retainers in low fluid-level wells.
Depck Tubing Bailer
Product Family No. H74749
APPLICATION
The Depck tubing bailer is a hydrostatic tool which is used for sand and other
casing debris cleanout. The Depck tubing bailer is run on the tubing string use
the tubing as the bailer chamber, maximize casing fill cleanout in a single trip.
The Depck tubing bailer works by having an overbalanced condition between
the tubing and the casing. Without this overbalanced condition the tool will
not operate. This overbalanced condition exists from the main valve in the
tubing string to the top of the fluid level in the casing. This condition is what
creates the hydrostatic pressure which is necessary for the cleanout operation.
Specification Guide
pump type tubing Bailer and the depck tubing Bailer
Tool
Size
Pump Type
Tubing Bailer
Depck
Tubing Bailer
OD
Length
ID
Closed
Stroke
Open
in.
in.
mm
in.
mm
ft
m
ft
m
ft
m
2-3/8
3.625
92.1
1.625
41.3
9.5
2.9
14.5
4.4
5
1.5
2-7/8
3.625
92.1
1.625
41.3
9.5
2.9
14.5
4.4
5
1.5
2-1/16
2.203
56.0
1.125
28.6
5.9
1.8
5.75
1.8
1.4
0.4
3-1/16
3.063
77.8
1.750
44.5
6.7
2.0
6.7
2.0
2.1
0.6
3-5/8
3.688
93.7
2.250
57.2
7.1
2.2
7.1
2.2
2.8
0.9
pump type tubing Bailer
Product Family No. H74750
depck tubing Bailer
Product Family No. H74749
71
General Remedial
Equipment and Accessories
B-2 and B-3 Tubing Anchor Catchers
Product Family Nos. H69803 and H69804
APPLICATION
The B-2™ and B-3™ tubing anchor catchers perform two important functions: (1) anchors the tubing
string; and (2) catches the tubing if it should part. Unlike most anchor catchers, which are set as tubing
anchors and rely upon movement of the parted tubing string to set them as catchers, the B-2 and B-3
are simultaneously set in anchoring and catching positions at all times.
When set with proper tension to overcome both breathing and buckling, the anchor catcher
effectively cuts operating costs, excessive rod, tubing, and casing wear and the number of resulting
pulling jobs. Elimination of breathing and buckling also increases production by lengthening the
effective stroke of the pump, thereby increasing volumetric efficiency.
Features/Benefits
„„Vertical
movement of the tubing during the pump cycle at the anchor is prevented by the
slips; if the tubing happens to part, it is caught by the tubing anchor before it falls
„„The tension applied to the tubing when the anchor is set will not increase which keeps
tubing stress at safe levels
„„The anchor will protect the tubing from impact of parted rods and cyclic stress caused by
pump pounding and breathing
„„The cone of the anchor does not move in relation to the slips once the anchor catcher is
set which prevents loading between the anchoring and catching positions
„„Each slip contains two sets of directional wickers: one set is designed to prevent upward
movement while the other prevents downward movement
„„Variable shear pin design permits emergency release at preselected loads with an
upward pull when normal release is impossible
„„The drag springs are constructed of stainless steel specially designed with a low-stress
value to minimize breaking under corrosive conditions
B-2 and B-3 tubing
anchor catchers
Product Family Nos.
H69803 and H69804
DB Tubing Anchor Catcher
Product Family No. H69805
APPLICATION
The DB™ tubing anchor catcher has the same design and features as the B-2 and B-3 tubing anchor
catchers (product family nos. H69803 and H69804). The DB tubing anchor catcher has drag blocks in
place of the drag springs.
dB tubing anchor catcher
Product Family No. H69805
72
General Remedial
Equipment and Accessories
Specification Guide
B-2 and B-3 Tubing Anchor Catchers
Casing
OD
Casing IDs in Which Tool
Can Be Set and Run
Tool
Size
Weight (T&C)
Minimum
Maximum
Minimum Bore
Through Tool
in.
mm
lb/ft
kg/m
in.
mm
in.
mm
in.
mm
2-7/8
73.0
6.4-6.5
9.5-9.7
28A
2.263
57.5
2.441
62.0
1.000
25.4
2-7/8
73.0
4.7-5.6
7.0-8.3
28B
2.385
60.6
2.563
65.1
1.000
25.4
4
101.6
9.5-12.6
14.1-18.8
41
3.250
82.6
3.562
90.5
1.000
25.4
4-1/2
114.3
9.5-13.5
14.1-20.1
43A
3.826
97.2
4.090
103.9
1.938
49.2
5
127.0
11.5-18
17.1-26.8
43B
4.276
108.6
4.560
115.8
1.938
49.2
5-1/2
139.7
13-23
19.3-34.2
45A
4.670
118.6
5.044
128.1
2.375
60.3
6-5/8
168.3
17-32
25.3-47.6
47A
5.675
144.2
6.456
163.8
2.438
61.9
7
177.8
20-38
29.8-56.6
47A
5.675
144.2
6.456
163.8
2.438
61.9
7
177.8
17-20
25.3-29.8
47B
6.413
162.9
7.125
181.0
2.438
61.9
7-5/8
193.7
20-39
29.8-58.0
47B
6.413
162.9
7.125
181.0
2.438
61.9
6-5/8
168.3
17-32
25.3-47.6
47 x 3.00
5.675
144.2
6.538
166.1
3.000
76.2
7
177.8
17-38
25.3-56.6
47 x 3.00
5.675
144.2
6.538
166.1
3.000
76.2
8-5/8
219.1
24-49
35.7-72.9
49
7.250
184.2
8.093
205.6
3.000
76.2
9-5/8
244.5
32.3-47
48.1-69.9
51
8.681
220.5
9.001
228.6
3.000
76.2
10-3/4
273.1
32.75-65.70
48.7-97.8
53
9.560
242.8
10.192
258.9
3.000
76.2
73
General Remedial
Equipment and Accessories
Pressure Relief Sub For Pumping Wells
Product Family No. H30055
APPLICATION
The pressure relief sub provides a means of draining the tubing fluid when a pump
standing valve, the pump itself, or rods cannot be retrieved prior to pulling the tubing.
Draining is accomplished by merely pressuring the tubing to shift the sleeve and
open the drain ports. Mechanical manipulations of the tubing string are not required
to open the pressure relief sub.
When the pressure relief sub is used in conjunction with a tubing anchor catcher and
it becomes necessary to shear the shear pins to release it, draining the tubing fluid
reduces the required tubing strength by the amount of the fluid load in the tubing.
Since the sleeve completely uncovers the drain ports in the body, effective fluid
cutting damage to the sub cannot occur.
Double-Box Tubing Hanger Bushing
pressure Relief Sub
for pumping Wells
Product Family No. H30055
Product Family No. H59810
APPLICATION
The double-box bushing for donut-type tubing hangers provides an easier, safer
method of applying and removing tension from tubing strings landed in this type
of hanger. It can be used with any anchor or packer that requires the tubing string
to be placed in tension (tension tubing anchor, anchor-catcher, Model A™ tension
packer, etc.)
double-Box tubing Hanger Bushing
Product Family No. H59810
74
General Remedial
Equipment and Accessories
D Tubing Swivel
Product Family No. H59801
APPLICATION
The D™ tubing swivel is designed for operating various Baker Hughes products during
light-duty drilling and circulating operations requiring rotation. The tubing swivel is
lightweight and sturdy with an operating load capacity of 35 tons (31,751 kg) with a
2-3/8 in. pin connection, and 50 tons (45,359 kg) with a 2-7/8 in. pin connection.
Features/Benefits
„„Has a working pressure of 7,500 psi (715 bar)
„„Tubing swivel weighs approximately 125 lb (57 kg) but is rugged and strong
„„Roller-type thrust bearing design supports the weight of the string
B-1 Center-Type Testing Manifold
Product Family No. H59833
D Testing Manifold
Product Family No. H59835
E Swivel-Type Testing Manifold
Product Family No. H59841
APPLICATION
A selection of surface testing manifolds are available to provide choke control for
conducting production or flow tests in conjunction with a retrievamatic style service
packer or compatible packer. All testing manifolds are dual-choke type thus eliminating
shutting the well in to change chokes.
d tubing Swivel
Product Family No. H59801
The testing manifolds have a working pressure rating of 10,000 psi (689 bar). The B-1™
is primarily used with tubing while the D™ and E™ are used with drillpipe.
75
General Remedial
Equipment and Accessories
Multi-Valve Cementing Manifolds
A complete selection of cementing manifolds are available to provide complete control of fluid flow and tubing, drillpipe, and casing pressures
during cement squeezing operations. The manifolds can also be used for a multitude of other pressure pumping operations. See chart below for
specifications on the manifolds.
76
Product Family No.
Working Pressure
Application
Features
Four-Valve
Cementing Manifold
H59824
5,000 psi
(345 bar)
Shallow hole,
relatively
low-pressure jobs
Compact, easily operated,
lighter, more economical and
easily transported
Five-Valve
Cementing Manifold
H59840
10,000 psi
(689 bar)
Med to
high-pressure jobs
Lighter, economical and
easily operated unit for medium
to high-pressure applications
Six-Valve
Cementing Manifold
H59813
10,000 psi
(689 bar)
High-pressure,
increased
capacity jobs
Increased flexibility, greater
capacity for restricting flow,
includes pressure gauges
General Remedial
Equipment and Accessories
Grabitz Magnets
Product Family No. H13101
APPLICATION
The Grabitz™ magnets are added to the bottomhole assembly (BHA) to help collect ferrous metal
debris from the wellbore and wellbore fluid where they are then retrieved to surface. The tools can
be used in applications such as packer milling, window milling, junk milling, or during designated
clean out runs. The tool is particularly effective when run in conjunction with other special
wellbore cleaning tools such as the ULTRA-CLEAN™ casing scraper and ULTRA-CLEAN brush sub.
The Grabitz magnets are also used to help clean metal debris such as cuttings or milling debris
from casing collars, horizontal wellbores, and subsea BOP stacks. The tools can also be used in
wells with low annular velocities, wells that contain fluids with poor carrying capacities and in
wells where circulation is a problem.
The Grabitz magnets are used as part of the Custodian™ wellbore cleaning system which also
contains the VACS™ system, Multi-Task Wellbore Filter™, shear type swivel and circulation
valve, BOP jet sub, Clean Bore Riser Brush™, ULTRA-CLEAN casing scraper, inflow test packer,
and ULTRA-CLEAN brush sub to form a complete one-trip wellbore cleaning system.
The Grabitz downhole magnets can be incorporated in a BHA as needed depending on application.
For packer milling jobs the tool should be placed a joint above the top boot basket; for collection of
perforating gun debris the tool should be placed below the perforating guns; for cleanout runs the
tool should be placed above scrapers and brushes.
The magnets of the Grabitz downhole tools are very strong and can affect the operation of
computers, watches and pacemakers. It is recommended to not let anyone within 2 feet of a tool
that is wearing a pacemaker. Caution should also be used as the strength of the magnets can
easily cause hands or fingers to be mashed or trapped between the magnets and loose objects.
Features/Benefits
„„Collects cuttings downhole and retrieves them to surface
„„Easily cleaned
„„Easily disassembled for inspection
„„One-piece full strength mandrel
Grabitz magnets
Product Family No. H13101
77
General Remedial
Equipment and Accessories
Clean Bore Riser Brush and Boot Basket
Product Family No. H13014
APPLICATION
The Baker Hughes clean bore riser brush and boot basket is designed to clean the inside
diameter (ID) of drilling and production riser systems. The tool is used to brush and wipe
mud residue, cement, or other debris from the riser inside wall and recover them to surface.
Recovery is done with a boot basket that is designed in with the brush/wiper assembly and
built on a mandrel that is full drill pipe strength. The tool can be rotated and short tripped
with the Baker Hughes blow out preventer (BOP), jet sub and Multi-Task Wellbore Filter™. It
can also be run as part of the Baker Hughes Custodian™ wellbore cleaning system along with
super downhole magnets, shear type circulation valve and swivel, ULTRA-CLEAN™ casing
scrapers, VACS™ tool, Multi-Task Wellbore Filter, and BOP jet sub.
Typically the clean bore riser brush is picked up with the BOP jet sub and surface dressed
Multi-Task Wellbore Filter, which make up the upper cleanout assembly. The upper assembly
is then short tripped with the lower string of cleanup tools in the hole. It is spaced so the
BOP, wellhead and riser areas are cleaned while the lower string is cleaning the area where
the completion packer is to be set. Once the BOPs have been jetted the upper clean out
assembly is pulled out of the hole. The lower assembly is then run back in the hole and the
clean-up program can continue. The upper clean-up assembly can also be short tripped after
the lower clean-up has been done and is being pulled out of the hole.
Features/Benefits
„„360° coverage
„„Flexible brushes to brush and scrape
„„Built-in boot basket to collect debris
„„Full drill pipe strength
„„Non-rotating brushes
clean Bore Riser Brush
and Boot Basket
Product Family No. H13014
78
General Remedial
Equipment and Accessories
Multi-Task Wellbore Filter
Product Family No. H13015
APPLICATION
The Baker Hughes Multi-Task Wellbore Filter™ allows collection of debris from wellbore wall,
brushing of wellbore wall, and filtering of fluid all in one run. It is designed to seek out
junk, collect it, then carry it to surface. It is a modular tool and can be run in conjunction with
Baker Hughes super downhole magnets, bits, casing scrapers, stabilizers, etc. The standard
filtration media on The Multi-Task Wellbore Filter is field-proven BAKERWELD™ stainless steel
screen, however slotted or perforated liners or a combination of these, can also be utilized. Debris
capacity can be optimized by simply changing the length of screen and adding an extension to the
mandrel. It is primarily for use in pre completion stages of the well’s construction, but can be run
anytime the wellbore has become contaminated with debris, such as after a milling operation.
The Multi-Task Wellbore Filter will help prevent the common problems associated with stuck
completions or liner equipment due to unexpected debris in hole.
To operate the tool simply make up in the string, verify bypass operation and run-in-hole (RIH).
When RIH the tool will act as a boot basket allowing collection of large debris using fluid flow as
it passes through the tool. When pulling-out-of-hole, the bypass is closed and the tool now diverts
fluid through the filter media capturing the debris. To clean out debris at surface, simply unlock the
clean out windows at bottom of tool and remove debris.
Features/Benefits
„„Acts as boot basket collecting debris during run in
„„Collects debris from wellbore during run in, then filters wellbore fluid when pulling out of hole
„„Optional stainless steel brushes can be run below non-rotating cups, allowing brushing and
filtering with a single tool
„„Filter mechanism can be slotted liner or BAKERWELD screen with variable gauge to suit all
fluids and debris types
„„Large bypass area for fast run in
„„Large clean out windows located at bottom of tool for easy cleanout of debris
„„Rigid with full tensile and torsional ratings through tool
„„Drillpipe connections
„„Modular tool
„„No balls or darts required to operate
„„Debris capacity can be increased by adding extensions to mandrel and screen
Specification Guide
Casing Size
Weight
in.
mm
lb/ft
kg/m
7
177.8
23.0-32.0
368.4-512.6
7
177.8
35.0-42.7
560.6-684.0
7-5/8
193.7
26.4-33.7
422.9-539.8
7-5/8
193.7
39.0-47.1
624.7-754.5
9-5/8
244.5
36.0-53.5
576.7-857.0
10-3/4
273.0
45.5-71.1
728.8-1138.9
multi-task Wellbore filter
Product Family No. H13015
79
General Remedial
Equipment and Accessories
Shear Type Circulation Valve and Swivel
Product Family No. H14046
APPLICATION
The shear type circulation valve and swivel (STCVS) is normally used to
locate at a known point such as a liner top, shear down to put the tool in the
swivel/circulate mode, and open ports for high volume circulation at the tool.
The STCVS has two primary positions. In the stroked open position it allows
fluid flow and torque to be fully transmitted through the tool. In the closed, or
sheared position, it acts as a swivel and concurrently provides ports for high
volume circulation at the tool. The tool can even be used in applications where
polishing a PBR/liner top or drilling cement is required. For cement drilling
applications the shear activation can be set to a higher value, if needed.
The shear type swivel and circulation valves are available with a 7-3/8 in.
(187.3 mm) OD with NC 50 connections and 5.00 in. (127 mm) OD with NC 38
connections. The tool can be run in conjunction with polishing mills, dress off
tools, Multi-Task Wellbore Filter™, super downhole magnets, VACS™,
ULTRA-CLEAN™ casing scraper and/or jetting subs.
The primary feature of the STCVS is the ability to shear down and rotate
only above the tool, while rotation below the tool is prevented. When weight
is applied to put the tool in the closed position, it also opens ports in the
tool allowing high volume circulation uphole through the STCVS. Straight
pickup will close the ports, restoring positive circulation through the tool
and allowing rotation of the string below the tool to take place again. This
procedure can be repeated as needed.
Features/Benefits
„„Allows
for rotation of entire string or only above the tool
„„Allows for positive circulation at the tool or all the way through
the string below
„„Tool can be run as part of a complete wellbore clean up system
„„No drop balls or darts needed
„„Allows milling or drilling with tool in string to take place
„„The tool can be shifted from stroked open to closed position
multiple times
Shear type circulation Valve and Swivel
Product Family No. H14046
80
General Remedial
Equipment and Accessories
BOP Jet Sub
Product Family No. H14068
APPLICATION
The BOP (wellhead blowout preventer) jet sub was developed to wash debris and
clean out the BOP, risers, wellhead area and casing, and tubing anchors. The tool
incorporates several nozzles that provide a hydraulic jetting force. Circulation through
the jet sub is possible by means of a piston held in place with shear screws preventing
flow through the nozzles. This enables the BOP jet sub to remain inactive until other
tool operation has been completed. Other options that can be run with the BOP jet
sub are Multi-Task Wellbore Filter™, ULTRA-CLEAN™ casing scraper, super downhole
magnets, shear type circulation valve, and swivel and the VACS™ tool to form a onetrip well cleaning system. When the operation of other tools has been completed,
a restriction plug is dropped from surface. Once the restriction is inside the piston,
hydraulic pressure dropped through the piston provides the force needed to shear
the shear screws. The piston will be pushed below the nozzles so that a majority of
the wellbore fluid will be pumped through the BOP jet sub nozzles. The restriction
plug includes a carbide nozzle so that fluid can still be pumped to the bottom of the
workstring. The restriction plug contains an internal fishing neck so it can be retrieved
by wireline if necessary.
The BOP jet sub is positioned in the workstring so that when the workstring reaches
total depth the BOP jet sub will be below the BOP. At this time other work can take
place with normal circulation through the workstring. When it is time to clean the
BOP the restriction plug must be dropped from surface. Pump pressure can be applied
to the piston to shear the shear screws. The piston will now move down below the
jetting nozzles allowing for circulation through the nozzles. The BOP, riser or other
areas may now be cleaned.
Features/Benefits
„„Screw in jetting nozzles that can easily be changed to adapt to pump capacity
„„Allows full flow
„„Simple design and operation
„„Can lie dormant in the drill string until activated or short tripped with
Bop Jet Sub
Product Family No. H14068
restriction plug
„„Balanced piston will not open prematurely
81
General Remedial
Equipment and Accessories
ULTRA-CLEAN Casing Scraper
Product Family No. H16107
APPLICATION
The non-rotating/rotating casing scraper is used to remove mud or cement sheath, perforation burs, rust,
mill scale, paraffin, and similar substances from the casing internal diameter (ID). This is especially important
in pre completion stages where tight tolerance equipment will be run. These scrapers are also a very
effective component of the BHA when making gauge runs. Other accessories that can be run with it would
be Multi-Task Wellbore Filter™, super downhole magnets, VACS™, MF™ circulating tool, jet subs, mills, or bits.
One of the key benefits to this tool is the option to run it in the rotating or non-rotating mode. When in the
non-rotating mode, the blades and optional brushes remain stationary and the pipe can be rotated for long
periods while circulating to clean the wellbore, without the worry of wear to the casing ID. When in the
non-rotating mode, should the scraper become stuck, straight overpull will shear a ring and allow the safety
clutch to engage, putting the scraper in the rotating mode and allowing it to be worked free using torque,
overpull, circulation, and jarring.
Stainless steel brushes are also an option with the ULTRA-CLEAN™ casing scraper. The brushes are installed
above the scraper blades, to scrape then brush the casing ID during run in.
The tool has a rugged design and contains no external bolts that could work loose under extreme conditions. For
this reason the ULTRA-CLEAN casing scraper is recommended for use when drilling cement on the clean out run.
Features/Benefits
„„Non-rotating mode eliminates risk of damaging or wearing casing when rotating drill string
„„Scraper can be dressed in rotating or non-rotating modes, by simply relocating a shear ring
„„No bolts, clamps or threads that can work loose and allow blades to be left in the hole
„„Non-rotating cylindrical brush may be installed above scraper blades to optimize performance by
allowing scraping then brushing in one run
„„Safety clutch allows scraper to go from rotating to non-rotating mode with overpull, should the
tool ever become stuck, allowing it to be worked free; should the tool ever have to be washed
over, the clutch will also keep the tool components from spinning
„„Hard metal applied to scraping edges on blades to provide endurance and maximum service
„„Spring mounted blades provide 360o contact with the casing ID
„„Shims are also available to keep the tool centralized in deviated wells, when centralizer are not
run above/below the ULTRA-CLEAN casing scraper
SpecificationS Guide
Casing OD
mm
lb/ft
kg/m
7
177.8
17-38
25.3-56.5
7-5/8
193.7
9-5/8
244.5
32-53.5
10-3/4
273.0
32.75-71.1
48.7-105.8
13-3/8
339.7
54.5-92.0
81.1-136.9
„„In development
Note: Other sizes available on request
82
Casing Weight
in.
„
47.6-79.6
uLtRa-cLean casing Scraper
Product Family No. H16107
General Remedial
Equipment and Accessories
ULTRA-CLEAN Brush Tool
Product Family No. H16108
APPLICATION
The ULTRA-CLEAN™ brush tool from Baker Hughes is used to brush and clean the inside diameter
(ID) of casing. It is designed to remove scale, rust, mud residue, and any other particles of debris
that might be brushed from the casing ID. The tool can be run by itself or as an integral piece
of the Custodian wellbore cleaning system with the ULTRA-CLEAN casing scraper, Multi-Task
Wellbore Filter™, shear type swivel and circulation valve, super downhole magnets, VACS™ tool,
BOP jet sub, and clean bore riser brush.
The ULTRA-CLEAN brush tool features self-centering, non-rotational stabilizers to keep the nonrotating brush sleeve centered in the hole, preventing wear or damage to the casing. This ensures
360o brush coverage and eliminates uneven brush wear while allowing for rotation of the heavyduty main mandrel in straight and high angle holes. Another benefit of the tool is a special safety
clutch that can be activated should the stabilizers or brush sleeve ever get stuck. This will allow
torque to be transferred to the entire tool for working it free or washover contingencies should
it ever become necessary. The tool is designed with ample room to allow for bypass of debris
through the special spring steel brushes and stabilizers.
Features/Benefits
„„360o coverage
„„Non-rotating stabilizers that prevent wear or damage to casing when rotating or drilling
„„Self-centering
„„Flexible brushes
„„Enhances chemical cleaning
„„Supplied with drill pie connections (box up-pin down)
„„Material options on brushes available
uLtRa-cLean Brush tool
Product Family No. H16108
83
General Remedial
Equipment and Accessories
Wellbore Test Packer
Product Family No. H40723
APPLICATION
The Baker Hughes wellbore test packer is designed to perform a negative inflow test on a liner top.
The tool is normally run in the same trip as the wellbore cleanup tools, eliminating the need for
a designated run with a retrievable packer. A negative test is completed by displacing fluid in the
workstring with a lighter weight fluid than is in the remainder of the wellbore.
A polished bore receptacle (PBR) polishing mill and liner dress off mill can be run below the ITP as
a locator. The wellbore test packer is set by downward force on the liner top, closing the bypass
and expanding the elements on the wellbore test packer. Annulus pressure (500 psi – 1,000 psi
[34 bar – 68 bar]) is applied to verify packing elements are working properly. After a successful
element test, the pressure is bled to zero and the packer is picked up off the liner top and the bypass
is opened. A precalculated volume of lighter fluid is pumped down the workstring to achieve a
desired under-balance. With back pressure held in the workstring, the packer is lowered to the liner
top and reset. Workstring pressure is bled off to zero in 500 psi (34 bar) increments. The workstring
is then observed for pressure increases denoting a leaking liner lap. With a positive test concluded,
the workstring is once again pressured to the same back pressure as before to equalize the pressure
across the tool. Straight pickup is applied to open the bypass and unset the packing element. The
well is ready for the recommended mud displacement procedure.
Features/Benefits
„„Large bypass for fast run in hole, tripping out of hole, and high circulation rates
„„Simple to operate compression set
„„Saves rig time by eliminating an additional trip
„„Torque through design allows for rotation of wellbore cleanout system below packer
ReQuiRed Set-doWn WeiGHt
pressure Below the packer
Pressure Below the Packer
Set-Down Weight
psi
bar
lb
daN
650
44
40,000
17,926
1,000
68
60,000
26,880
1,500
102
90,000
40,320
2,000
136
120,000
53,760
2,500
170
150,000
67,200
3,000
204
180,000
80,640
3,500
238
210,000
94,080
4,000
272
240,000
107,520
4,500
306
270,000
120,960
5,000
340
300,000
134,400
Wellbore test packer
Product Family No. H40723
The required set-down is the weight of the drillpipe string above the packer.
The weight below the packer does not assist in element pack-off.
Specification Guide
Casing
OD
84
Casing
Weight
Tool
Size
Gage Ring OD
Packing
Element
Spacer OD
Packing
Element OD
Tensile Rating
Pressure Rating
Burt and
Collapse
Required Set-Down Weight to
Pack Off Elements
in.
lb/ft
kg/m
in.
mm
in.
mm
in.
mm
lb
daN
psi
bar
lb
daN
lb
daN
9-5/8
53.5
79.7
51A1
8.320
211.3
8.320
211.3
8.185
207.8
588,000
263,424
5,000
340
40,000
17,920
104,000
46,592
9-5/8
47
69.9
51A2
8.460
214.8
8.460
214.8
8.380
212.8
588,000
263,424
5,000
340
40,000
17,920
104,000
46,592
* Pressure on the tubing and below the packer will require set-down weight according to the above table
General Remedial
Equipment and Accessories
Standard VACS System
Product Family No. H13125
APPLICATION
The VACS™ tool is designed to capture cuttings downhole and prevent metal cuttings or junk from
reaching the surface during milling operations. The VACS tool consists of a jet bushing, a drive
sub, 2-3 joints of washpipe, triple connection bushing, screen joint, and bushing and a diverter
tube. This allows for conventional circulation down through the workstring while performing a
reverse circulating action downhole. This tool is ideal for keeping cuttings from accumulating
inside a subsea BOP™ stack, deep water riser or becoming suspended in the milling fluid.
Position the VACS tool within 60–120 ft (18.3–36.6 m) above your milling assembly. Establish
normal milling procedures for the particular application being performed. During milling
operations, the cuttings will travel up through the center of the milling tool and up through the
diverter tube where the cuttings will fall out as the milling fluid flows through the screen and
out the jet bushing.
Features/Benefits
„„Keeps subsea BOPs clean of cuttings
„„Metal cuttings do not become suspended in the drilling or milling fluid
„„Traps all cuttings downhole
„„Can be used with all non-hydraulic milling tools
„„Can be used to remove large amounts of debris from the bottom of the well
„„Reduces mud cost
„„Debris volume can be increased
„„Mud yield and viscosity are not a factor in the tool’s performance
„„Captures cutting during milling operations
Specification Guide
Size
OD
Torque Rating
Connection
in.
in.
mm
ft-lb
N/m
3-3/4
3.750
95.3
2-3/8 in. Reg
3,950
5,355
5
5.360
136.1
3-1/2 in. IF (NC-38)
9,550
12,950
7-5/8
8.010
203.5
4-1/2 in. IF (NC-50)
25,000
33,900
9-5/8
10.100
256.5
6-5/8 in. Reg
48,500
65,760
Approximate
Overall Length
ft
m
Length of Assembled
Tool is dependent
on Debris
Chamber Length
Standard VacS System
Product Family No. H13125
85
86
PIP Inflatable Elements
Production Injection Packer (PIP) Inflatable Elements
Setting Environment
Element Type
Openhole
Open Hole
Perforations
Pressure From
Above
Pressure From
Below
x
Cased Hole
Screens
x
x
x
x
x
x
x
x
x
x
Single Anchor (Down)
Differential Pressure Condition
Slotted
Liner
Single Anchor (Up)
x
x
x
x
Double Anchor
x
x
x
x
x
x
Double Anchor Dual Seal
x
x
x
x
x
x
openhole
Single anchor
double anchor
openhole
x
Single anchor
double anchor
87
PIP Inflatable Elements
pip inflatable element rating table
Standard Service Elements
ID of Casing or Openhole
Element OD
in.
in. (mm)
4
4.5
5
5.5
6
6.5
7
7.5
8
8.5
9
9.5
(101.6) (114.3) (127.0) (139.7) (152.4) (165.1) (177.8) (190.5) (203.2) (215.9) (228.6) (241.3)
mm
3,575 3,013 2,450 2,000
(246.5) (207.7) (168.9) (137.9)
3.50 B
88.9 B
4,000 4,000
(2.00 ID) (50.80 ID) (275.8) (275.8)
3,044 2,509 2,000
(209.9) (173.0) (137.9)
4.25 ID
98.4
4.25
108.0
10.5
11
12
13
14
(266.7) (279.4) (304.8) (330.2) (355.6)
5,075
5,500 (349.9)
(379.2)
4.65 ID
5,500
(379.2)
17
(431.8)
4,150 3,488 2,825 2,350
(286.1) (240.5) (194.8) (162.0)
6.87 ID
2,000
(137.9)
4,700 4,000 3,300 2,825 2,350
(324.1) (275.8) (227.5) (194.8) (162.0)
7.41 ID
2,000
(137.9)
5.53 ID
4.63 A
117.5 A
(2.00 ID) (50.80 ID)
5,500 4,625 3,975 3,325 2,838 2,350 2,000
5,500 (379.2) (318.9) (274.1) (229.3) (195.7) (162.0) (137.9)
(379.2)
7.82 ID
4.63 B
117.5 A
(2.50 ID) (63.50 ID)
4,650 3,800 3,250 2,700 2,275 2,000
5,500 (320.6) (262.0) (224.1) (186.2) (156.9) (137.9)
(379.2)
6.21 ID
5.00
127.0
5,500
(379.2)
5.38
136.5
5,500 5,500
(379.2) (379.2)
5,075 4,350 3,788 3,225 2,775 2,325 2,000
5,500 (349.9) (299.9) (261.2) (222.4) (191.3) (160.3) (137.9)
(379.2)
5.63
142.9
6.25
158.8
7.00
6.67 ID
5,000 4,450 3,900 3,450 3,000 2,650
5,500 (344.7) (306.8) (268.9) (237.9) (206.8) (182.7)
(379.2)
2,300
(158.6)
2,000
(137.9)
5,500 5,500 5,500 4,850 4,200 3,750 3,300 2,900
(379.2) (379.2) (379.2) (334.4) (289.6) (258.6) (227.5) (199.9)
2,500
(172.4)
2,200
(151.7)
5,000 4,325 3,863
5,500 (344.7) (298.2) (266.3)
(379.2)
3,400
(234.4)
3,025
(208.6)
2,650 2,000
(182.7) (137.9)
177.8
8.13 ID
5,500 5,500 5,500
5,187
(379.2) (379.2) (379.2) 5,500 (357.6)
(379.2)
4,600
(317.2)
4,100
(282.7)
3,600 2,800 2,200
(248.2) (193.1) (151.7)
7.88
200.0
5,500 5,500 5,500 5,500
(379.2) (379.2) (379.2) (379.2)
5,100
(351.6)
4,550 3,700 3,000 2,350
(313.7) (255.1) (206.8) (162.0)
10.38
263.5
5,500
(379.2)
5,500 5,500 4,5000 3,625
(379.2) (379.2) (310.3) (249.9)
5,500 5,500 5,500
(379.2) (379.2) (379.2)
Element
OD
8.13 ID
10.41 ID
5,500
(379.2)
10.83 ID
2,000
(137.9)
13.33 ID
2,000
(137.9)
14.64 ID
2,000
(137.9)
3,000
(206.8)
2,400
(165.5)
16.75 ID
2,000
(137.9)
ID of Casing or Openhole
in. (mm)
13.875
(352.4)
15
16
(381.0) (406.4)
Limited Differential Pressure psi (bar)
3.50 A
88.9 A
5,500 4,475
(1.25 ID) (31.75 ID) (379.2) (308.5)
3.88
10
(254.0)
in. (mm)
16.5
(419.1)
17
(431.8)
18
(457.2)
5,500
(379.2)
4,892
(337.3)
3,947
(272.1)
19
(482.6)
20
(508.0)
21
(533.4)
22
(558.8)
23
(584.2)
24
(609.6)
1,950
(134.5)
1,750
(120.7)
1,550
(106.9)
Limited Differential Pressure psi (bar)
3,205
(221.0)
2,619
(180.6)
2,200
(151.7)
All above pressure ratings are for 63 in. (1600.2 mm) long elements.
Element OD
ID of Casing or Openhole
in. (mm)
13.875
(352.4)
in. (mm)
25
(635.0)
26
(660.4)
27
(685.8)
28
(711.2)
29
(736.6)
1,400
(96.5)
1,300
(89.6)
1,200
(82.7)
1,100
(75.8)
1,025
(70.7)
31
(787.4)
32
(812.8)
33
(838.2)
34
(863.6)
35
(889.0)
36
(914.4)
725
(50.0)
650
(44.8)
575
(39.6)
500
(34.5)
Limited Differential Pressure psi (bar)
All above pressure ratings are for 103.25 in. (2622.6 mm) long elements.
88
30
(762.0)
950
(65.5)
875
(60.3)
800
(55.2)
PIP Inflatable Elements
PIPDESIGN
PIPDESIGN™ is a Baker Hughes proprietary software design
program developed to assist in information gathering, engineering,
execution, and post job reporting.
Volume calculator
pre-Job information
performance envelope
element Hydraulics
89
90
Blue Whale ISP
Blue Whale Inflatable Service Packer (ISP)
Product Family No. H30045
APPLICATION
The Blue Whale™ inflatable service packer (ISP) was developed to address the increasing demand
for inflatable solutions deployed on large diameter drillpipe in critical applications where flawless
execution is a necessity. It has evolved from the Baker Hughes inflatable production injection
packer (PIP™), the pioneer of all inflatable service tools. By applying lessons learned to this
versatile workhorse, the Blue Whale ISP has become a truly fit for purpose inflatable service
packer that is particularly well-suited for applications that require drillpipe deployment. As with
all Baker Hughes inflatable service tools, there is a wide range of accessories which are available
to convert the Blue Whale ISP into a permanent or retrievable bridge plug or a permanent cement
retainer for cased or open hole applications. The high expansion characteristics of the inflatable
element provide a reliable solution across a diverse range of wellbore conditions where the
limitations of traditional mechanical type service tools are exceeded.
Features/Benefits
„„Component parts are designed to have greater tensile and torque capabilities
„„3-1/2 in. (88.9 mm) IF top and bottom connections with minimum 12 in. (304.8 mm) of tong
area for simplified rig-up and rig-down while on location
„„Uses only 103.25 in. (2.62 m) long inflatable elements for a larger seal area and greater
anchoring capabilities
„„Thru-tubing style poppet valve and delayed opening valve (DOV) are integrated into the
design to enhance reliability and performance
„„Shear-pinned bottom sub and bottom guide prevent wadding up while deploying the ISP
through tight restrictions and long horizontal laterals
„„Inflation and deflation areas have been increased to minimize the chance of blockage
„„All metal components of the chassis are NACE approved for H2S service
Specification Guide
Blue Whale inflatable Service packer (iSp)
Tensile Rating
Inflatable
Element
Length
in.
mm
Tool
ID
in.
mm
Tool
Length
in.
Thread
Connection
(Box Up x
Pin Down)
mm
103.25 2.62 2.00 51 245.63 6.24
3-1/2
Internal
Flush
Above the
Inflatable
Element X
Mandrel
Down l
Shear
Pinned
Bottom
Sub
lb
lb
lb
300,000
Burst
Rating
psi
190,000 21,390 5,500
Collapse
Rating
Temperature
Rating
bar
psi
bar
°F
°C
379
5,500
379
300
149
X This rating is applicable to all sections from the top sub to the top element adapter in the unreleased or released
l
positions. It does not apply to the inflatable element thread connection when the inflatable element is inflated.
This rating applies to all sections from the top thread connection on the mandrel down.
Blue Whale inflatable
Service packer (iSp)
Product Family No. H30045
91
Blue Whale ISP
Resettable Blue Whale
Product Family No. H30047
APPLICATION
The resettable Blue Whale™ inflatable service packer (ISP) is a multiple set packer developed to
address the increased demand for inflatable solutions deployed on large diameter drill pipe. It has
evolved from the Baker Hughes resettable production injection packer (RS PIP™).
The high expansion characteristics of the inflatable element provide a reliable solution across a
diverse range of wellbore conditions where the limitations of traditional mechanical type service
tools are exceeded. As a result it is the ideal tool for treating, testing, production, injection, and
numerous other zone-isolation applications.
Features/Benefits
„„Component parts have been designed to have much higher tensile and torque capabilities
„„3-1/2 IF (NC38) end connections with a minimum 12 in. of tong area for simplified rig-up
and rig-down while on location
„„Uses only 103.25 in. long inflatable elements for a larger seal area and greater
anchoring capabilities
„„Thru-tubing style poppet valve is integrated into the design to enhance reliability
and performance
„„Delayed opening valve (DOV) prevents inflation while running in to first setting depth
„„Shear-pinned bottom sub and bottom guide prevent wadding up while deploying to first
setting depth through tight restrictions and long horizontal laterals
„„Inflation and deflation areas have been increased to minimize the chance of blockage
„„All metal components of chassis are NACE approved for H2S service
Resettable Blue Whale
Product Family No. H30047
92
Blue Whale ISP
Blue Whale Retrievable Bridge Plug With GT Unloader
Assembly and LT Retrieving Head
Product Family Nos. H30045, H30046, and H67778
APPLICATION
The Blue Whale™ retrievable bridge plug is a reliable temporary isolation assembly that can be
deployed with drillpipe in a wide range of casing and openhole configurations.
The combination of the Blue Whale technology and the GT™ unloader subassembly result in a reliable
plugging system for applications where the limitations of traditional mechanical type service tools
are exceeded.
The high expansion characteristics of the Blue Whale inflatable element makes it the perfect tool to
pass through tight restrictions and set in casing and openhole sizes up to 36 inches.
The GT unloader subassembly provides a pressure balanced seal that contains pressure from
below. This configuration permits well control through the drill string while equalizing from below
the Blue Whale.
The LT™ retrieving head is used to run, set and retrieve the bridge plug. The bonded seal in the LT
retrieving head seals on the unloader of the GT to prevent communication between the tubing and
the annulus. When the retrieving head is made up to the bridge plug, the unloader is open and
the Blue Whale can be set with pressure in the drill string. Once the element is inflated, it is
possible to test from above and below the Blue Whale before releasing the LT retrieving head from
the Blue Whale retrievable bridge plug.
Features/Benefits
„„One trip to set and release the bridge plug
„„One trip to deflate and retrieve the bridge plug
„„Test from above and below capability
„„Balanced unloader sleeve ensures easy, safe pressure equalization and controls fluid flow
through the bridge plug while running in
„„Unloader seal design prevents debris from falling inside the Blue Whale that could
complicate retrieval
„„Well control through the drill string can be maintained while equalizing pressure from
below the plug
Blue Whale Retrievable Bridge plug
Product Family No. H30045
93
Blue Whale ISP
Blue Whale Permanent Bridge Plug
Product Family No. H30048
APPLICATION
The permanent Blue Whale™ bridge plug is a simplified version of the Blue Whale inflatable
service packer (ISP). The permanent Blue Whale bridge plug was developed to address the
increasing demand for permanent inflatable solutions deployed on large diameter drill pipe.
The permanent Blue Whale bridge plug is an inflatable bridge plug that packs off and anchors to
provide zonal isolation in openhole and cased-hole applications. The well bore seal and anchor are
provided by an inflatable packing element that is set by pumping fluid down the tubing string. Because
the inflatable element is set with pump pressure, tubing weight is not required to set the tool, so it
can be run shallow and in other applications where tubing weight is not available at the tool.
Because of the large expansion capabilities of the inflatable element, the tool can be run through
well bore restrictions and or set in washed out sections of well bore. The tool is also suited
for soft formations and older/deteriorated casing as well as fiberglass casing because its large
contact area with the side of the hole results in lower unit loading.
Features/Benefits
„„Components parts have been designed to have higher tensile and torque capabilities
„„Uses only 103.25 in. long inflatable element for a larger seal area and greater
anchoring capabilities
„„Thru-tubing style poppet valve and delayed opening valve (DOV) are integrated into the
design to enhance reliability and performance
„„Shear pinned bottom sub and bottom guide prevent wadding up while deploying the
permanent Blue Whale bridge plug through tight restrictions and long horizontal laterals
„„All metal components of the chassis are NACE approved for H2S service
„„Easy rotational disconnect does not require accessory tools
„„Designed for extended reach horizontal abandonment
Blue Whale permanent Bridge plug
Product Family No. H30048
94
Blue Whale ISP
Blue Whale ISP Sample Applications
Inflatable Service Packer For Shoe Test and Squeeze
1) Set Packer, Test Shoe
2) Spot Cement to Tool
3) Squeeze Cement
4) Reverse Out
3) Drill Cement,
Circulate Out Sand
4) Equalize, Release,
and Retrieve RBP
Retrievable Bridge Plug (RBP) in Openhole
1) Set RBP, Spot Sand Plug
2) Close Pipe Rams,
Squeeze Cement
95
Blue Whale ISP
Inflatable Service Packer for Riser Change
1) Set RBP, Disconnect
2) Pull Drilling Riser
and Sub Sea BOP
3) Run Production Riser
4) Equalize, Release,
and Retrieve RBP
3) Test Drilling Liner
4) Test Liner Top
Resettable Blue Whale ISP for Wellbore Integrity Test
1) Test Riser
96
2) Test BOPs and Wellhead
PIP Packers
Single Set PIP/Resettable
Pup Joint
The single set production injection packer (PIP™) is a retrievable,
inflatable packer that may be run on drillpipe, threaded tubing,
or coiled tubing. It is best suited for performing zonal isolation in
openhole or casing. Due to the inflatable elements large expansion
characteristics, the packer can be run through restrictions in the
wellbore whether planned or unplanned and set in the larger ID
below. In this application the single set PIP or resettable PIP is run
through a casing restriction and set above a production zone. The
treatment fluid is spotted to the J™ circulating valve. The valve is
closed and the treatment fluid injected into the formation.
J™ Circulating Valve
Single Set PIP™
97
PIP Packers
Single Set (SS) PIP
Product Family No. H30001
APPLICATION
The single set (SS) production injection packer (PIP™) is an ideal tool
for performing zone isolation in openhole or casing. The PIP tool can
be run through wellbore restrictions and set in washed out sections
of openhole due to the large expansion capabilities of the field-proven
inflatable element. The tool is ideal for treating, testing, production,
injection, and numerous other zone isolation applications. The single
set PIP cannot be reset in the hole and must be brought to the surface
for maintenance between settings.
Features/Benefits
„„Sets
in casing or open hole
„„Element OD sizes from 3-1/2 in. (88.9 mm) to 13-7/8 in. (352.4 mm)
„„66 in. (1676.4 mm) or 136 in. (3454.4 mm) element lengths
„„Straddle
packer configurations
with pump pressure only (no tubing manipulation required)
„„Standard right-hand rotation release or pull release option
„„Set
Resettable (RS) PIP
Product Family No. H30002
APPLICATION
The resettable (RS) PIP is a multiple set packer designed for permanent
or temporary use in both openhole and casing. The RS PIP tool can be
run through wellbore restrictions and set in washed-out sections of
open hole due to the large expansion capabilities of the field-proven
inflatable element. The tool is ideal for treating, testing, production,
injection and numerous other zone isolation applications.
Features/Benefits
„„Sets
in casing or open hole
„„Element OD sizes from 3-1/2 in. (88.9 mm) to 10-3/8 in. (263.5 mm)
in. (1676.4 mm) or 136 in. (3454.4 mm) element lengths
prior to releasing with use of a J™ circulating valve
„„Released with right-hand rotation and applied workstring tension
„„Reset with drop ball and applied pump pressure coupled with
workstring compression
„„66
„„Equalized
Single Set (SS) pip
Product Family No. H30001
98
Resettable (RS) pip
Product Family No. H30002
PIP Packers
Hyper Inflatable Service Packer (ISP)
Product Family No. H30074
APPLICATION
The Hyper™ inflatable service packer (ISP) integrates the versatility of the PIP™ product
line and accessories with the heightened performance of thru-tubing inflatable elements.
The components of the PIP chassis were enhanced by upgrading the materials used and
incorporating minor design improvements. By adding a thru-tubing style element, the
Hyper ISP now offers a broader range of element configurations, including acid and
H2S service elements, in addition to having significantly greater differential pressure
capabilities. With a larger number of tool variations, the Hyper ISP provides fit-for-purpose
solutions across a diverse range of downhole environments.
Features/Benefits
„„Integration
of a thru-tubing-style element provides greater pressure,
draw-down and expansion capabilities
„„Availability of H2S and acid service elements increases the range of wellbore
operating parameters
„„Material upgrades and design enhancement to the chassis provide better
mechanical specifications
„„Available H2S service chassis provides intermediate-term packer solutions
in H2S environments
„„Available pull-release option increases reliability in horizontal or coiled
tubing installations
„„Compatibility with PIP accessory tools enables solutions across a diverse
range of applications
Hyper inflatable
Service packer (iSp)
Product Family No. H30074
99
PIP Packers
Surface Control Inflated (SCI) PIP
Product Family No. H30010
APPLICATION
The surface control inflated (SCI) PIP™ is a resettable packer that is usually used in shallow,
high-pressure formations. The SCI PIP is designed for permanent or temporary use in
openhole or casing. The SCI PIP is set by applying pressure through 1/4 in. (6.3 mm) OD
inflation control tubing. Pressure enters into the element and inflates the element against
the wellbore. The surface pressure is then locked in the element by closing the surface
valve on the 1/4 in. (6.3 mm) OD tubing.
Features/Benefits
„„Sets
in casing or open hole
OD sizes from 3-1/2 in. (88.9 mm) to 13-7/8 in. (352.4 mm)
„„Pressure ratings of the element are the same as for single set or resettable PIPs
„„Positive control over inflate pressure at all times
„„Inflate tube fittings on top and bottom so multiple packers (straddle) can be run
and controlled together
„„No integral valving system or deflate mechanism allows the packer to be deflated
by simply opening the surface valve
„„Element
Surface control inflated pip
Product Family No. H30010
100
PIP Bridge Plugs
Permanent Inflatable Bridge Plug
Pup joint
A single set (SS) PIP™ can be converted to an inflatable permanent
bridge plug. The reduced OD makes the PIP bridge plug ideal for all
applications in highly deviated or horizontal wells. This assembly is
set in a horizontal openhole section of the well to isolate the toe.
The hydraulic release running tool releases the tubing from the
bridge plug with applied hydraulic pressure. This feature requires no
rotation, which simplifies operations in horizontal wells.
Pup joint
J™ circulating valve
Production Injection Packer
PIP can be modified with an equalizing top that allows pressure
differentials to be equalized before retrieving the plug. This tool
can be set on coil tubing, threaded tubing or drillpipe. The SS PIP
is set above the zone and a treatment fluid is injected into the
isolated openhole formation.
Single set PIP™
Full-up valve
Hydraulic release
running tool
Permanent inflatable
bridge plug
101
PIP Bridge Plugs
Permanent Inflatable Bridge Plug (PIBP)
Product Family No. H30073
APPLICATION
The permanent inflatable bridge plug (PIBP) is a simplified version of the single set PIP™
(product family no. H30001). The PIBP is set by applying pressure down the run-in string to
inflate the element. Once the PIBP is inflated, simple right-hand rotation will disengage the
run-in string from the bridge plug.
Features/Benefits
„„Sets
in casing or openhole
OD sizes from 3-1/2 in. (88.9 mm) to 13-7/8 in. (352.4 mm)
„„66 in. (1676.4 mm) or 136 in. (3454.4 mm) seal lengths
„„Set with applied pump pressure only
„„Special thread release sub allows workstring to be disconnected without the
use of a J™ disconnect coupling
„„Element
permanent inflatable (piBp)
Bridge plug
Product Family No. H30073
102
PIP ISAP
PIP Inflatable Straddle Acidizing Packer (ISAP)
The PIP™ inflatable straddle acidizing packer (ISAP) system uses
two PIP tools coupled with an injection control valve, treatment
valve, and flow activated drain valve. The PIP ISAP system is ideal for
performing selective treatments in horizontal openhole, cased-hole or
gravel packed screens. This system maintains a constant inflate pressure
of +/-600 psi (41.4 bar) higher than the injection pressure through the
treatment valve. When the treatment is finished the elements are
deflated allowing movement to the next zone of interest.
Pup Joint
Bar/Ball Sleeve
Injection
Control Valve
PIP™ ISAP™ Element
Treatment
Control Valve
PIP ISAP Element
Flow Activated
Drain Valve
103
PIP ISAP
PIP Inflatable Straddle Acidizing Packer
Product Family No. H32911
APPLICATION
The PIP™ inflatable straddle acidizing packer (ISAP™) is a multiple set,
injecting tool string used for zonal isolation in both cased and
openhole environments. Designed to be run on tubing or drillpipe in
both horizontal and vertical applications, it allows the operator to
inject treatments or fluids selectively into short sections of the well.
Features/Benefits
„„No
rotational manipulation required to operate
pressure is always higher than treatment pressure
ensuring sealing integrity
„„Modular construction for ease of deployment
„„Ability to reset allows for multiple zone treatment in single trip
„„Integral injection control valve allows for hydrostatic imbalance
control and positive injection fluid control
„„Element
pip inflatable Straddle acidizing packer (iSap)
Product Family No. H32911
104
PIP Assemblies
SS PIP Straddle Hookup
PIP Cement Retainer
The versatility of Inflatable production injection packers
(PIP™) products is demonstrated by combining two PIPs in
a straddle arrangement. The application shown is used to
straddle perforations to isolate water production from the
straddled perforations. The lower zone produces from below
the straddle. The upper zone is opened to the production tubing
and produced through a pressure activated sub.
In remedial squeeze work an inflatable production injection packer
(PIP) is modified with an adaptable cement retainer assembly. The
cement retainer is set by pumping fluid down the tubing and at
a predetermined pressure the inflatable element is both set and
anchored. After the assembly is set, cementing operations may be
commenced. Upon completion of the cement squeeze the tubing
and stinger are released by means of straight pull on the running
string and cement may now be placed on top of the cement retainer
if required or the tubing and running BHA pulled from the well.
Pup joint
Pup Joint
Single Set PIP™
PIP Cement
Retainer Kit
Non-Rotating Tailpipe
P™ Pressure-Actuated
Circulating Sleeve
Single Set PIP
Single Set PIP
105
106
PIP Accessories
Fill-Up Sub
Product Family No. H30098
APPLICATION
The fill-up sub allows filling of the run-in string and removes any chance of prematurely
inflating a bull plugged inflatable bridge plug. A 1-in. (25.4-mm) side port in the sub allows
the run-in string to communicate with the annulus. The side port is shut off by dropping a
ball in the run-in string, allowing pressurization of the string and setting of the inflatable
bridge plug. The run-in string will drain through the three 1/2-in. (12.7-mm) inflation holes
while the drop ball is retrieved in the fill-up sub with the run-in string.
Fill-Up Valve
Product Family No. H30304
APPLICATION
The fill-up valve is designed to allow annulus fluids to enter and fill the tubing as it is
lowered into the wellbore. By equalizing tubing and annulus pressure, the fill-up valve
eliminates problems associated with hydrostatic pressure differentials. The valve
automatically opens with 25 psi (1.7 bar) annulus overbalance and closes once the
pressure is equalized. The fill up valve is permanently latched into the closed position
with 400 psi (27.5 bar) applied tubbing pressure.
fill-up Sub
Product Family No. H30098
fill-up Valve
Product Family No. H30304
107
PIP Accessories
Hydraulic Release Running Tool (HRRT)
Product Family No. H30025
APPLICATION
The hydraulic release running tool (HRRT) is normally used as a running tool for the PIP™
retrievable bridge plug. The HRRT allows the release of the tubing from the bridge plug
by applying pressure rather than rotating the tubing string. This can be an advantage in
deviated/horizontal holes or in any other situation where tubing manipulation is difficult.
The HRRT consists of two assemblies — the lug nipple and the hydraulic disconnect.
Features/Benefits
„„Allows
disconnecting from bridge plug without rotation
the PIP inflation pressure
„„Lug nipple also has a ball seat to provide secondary means of disconnecting
„„Bridge plug is retrieved using the standard method with a modified J™
coupling overshot
„„Can be used with other compatible tools as an emergency disconnect
„„Controls
On-Off Connectors (High Performance Series)
Product Family Nos. H68420, H68421, H68422, H68423, H68424, H68426, and H68427
Hydraulic Release Running tool
Product Family No. H30025
APPLICATION
Baker Hughes presents its series of high performance on-off sealing connectors. The series
feature the standard L-10™ and R-10™ tools which are rated to 10,000 psi (689 bar) for H2S
service and have tensile strengths equivalent to L-80™ tubing.
For corrosive injection applications, the series features the L-316™ and R-316™ tools which
have a 316 stainless steel flow path and are rated to 4,000 psi (276 bar). The series also
feature the LE-10™ and RE-10™ tools with a 42-in. (1066 mm) stroke for applications
which require compensation for tubing movement. Both bonded- and Chevron-type seals
are available for most applications.
Features/Benefits
„„Standard
bonded seal design is configured to accommodate elastomer swell
and eliminate trapped pressure between seals
„„Location of seal stack above connection eliminates need for o-rings
„„Bonded elastomer seal is HNBR (hydrogenated nitrile rubber)
„„Optional high performance thermoplastic chevron seal system for the most
challenging applications
„„Can be used with other compatible tools as an emergency disconnect
108
on-off connectors
(High performance Series)
Product Family Nos. H68420,
H68421, H68422, H68423,
H68424, H68426 and H68427
PIP Accessories
J Circulating Valve
Product Family No. H30050
APPLICATION
The J™ circulating valve was designed as a means of opening and closing the tubing
immediately above a packer to permit reversing, equalizing, circulating, and spotting of acids
or other fluids. The J circulating valve is a simple lug and jay slot mechanism with a left-turn
opening sequence. Shear pins prevent premature opening while running in the hole.
B Bar/Ball Actuated Circulating Sleeve
Product Family No. H30055
APPLICATION
The B™ bar/ball actuated circulating sleeve is used as a means of opening the tubing to
the annulus. The shear pinned inner sleeve can be driven open by a wireline sinker bar or
pumped open with a ball. The bar/ball sleeve is occasionally used between two PIP™s when
used as a straddle tool.
P Pressure-Actuated Circulating Sleeve
Product Family No. H30055
APPLICATION
The P™ pressure-actuated circulating sleeve is used as a means of opening the tubing to
the annulus. The shear pinned outer sleeve is displaced once the predetermined opening
pressure is applied. The P sleeve does not require the aid of a wireline sinker bar or ball such
as the B bar/ball sleeve does. The P sleeve is commonly used between two PIPs when used
as a straddle tool.
B Bar/Ball actuated circulating Sleeve
Product Family No. H30055
p pressure-actuated circulating Sleeve
Product Family No. H30055
J circulating Valve
Product Family No. H30050
109
PIP Accessories
PIP Cement Retainer Kit
Product Family No. H30087
APPLICATION
The PIP™ cement retainer kit can be run with a permanent inflatable bridge
plug (PIBP) (product family no. H30073) or a standard production injection
packer (PIP)(product family no. H30001), to convert either of them to a
permanent cement retainer for cased-hole or openhole applications.
Two opposing flapper valves are held open by the inner mandrel while the
tool is run to setting depth. After the Inflatable PIP or PIBP is set, cement can
be bull-headed below the set tool or spotted by incorporating the use of a
J™ circulating valve (product family no. H30050).
Once cementing operations are complete, the run-in string is disconnected
from the PIP cement retainer kit by either applying tension for the pull-release
version or by applying right-hand rotation for the rotational-release version. In
either case, the inner mandrel is pulled from the PIP cement retainer kit and
the opposing flapper valves spring closed, allowing the PIP cement retainer
kit to hold pressure from both above and below.
Features/Benefits
„„This
accessory tool converts a standard production injection
packer (PIP) or permanent inflatable bridge plug (PIBP) into a
permanent cement retainer
„„It can be used in cased-hole or openhole applications
„„Available in pull-release or rotational-release versions to offer a
“fit-for-purpose” solution for the given application
„„Spring-loaded opposing flapper valves ensure that pressure can
be held from both above and below
„„Rotational-release version allows the spotting of cement when
run in conjunction with a J circulating valve
(Rotational-Release)
(pull-Release)
pip cement Retainer Kit
Product Family No. H30087
Specification Guide
pip cement Retainer Kit
OD
Type
Rotational
Pull-Release
„
110
Tensile
Strength
ID
in.
mm
in.
mm
5.00
127
1.25
32
4.00
102
.957
24
5.00
127
1.25
32
3.875
98
.957
24
lb
150,000
200,000
„
Burst
Temperature
Rating
Collapse
Unbalanced
Area
psi
bar
psi
bar
°F
°C
in.2
7,500
517
7,400
510
300
149
1.21
6,000
414
6,100
421
7,500
517
7,400
510
6,000
414
6,100
421
Tensile capacity of pull-release option is determined by the shear pin setting.
300
149
Tool Joint
Box and Pin
2.875 in. EU 8 Rd
3.50 in. API IF
0.53
2.375 in. EU 8 Rd
1.21
2.875 in. EU 8 Rd
0.53
2.375 in. EU 8 Rd
PIP Options
Delayed Opening Valve
The delayed opening valve prevents the element from being
prematurely inflated when fluid is circulated down the tubing
or when the tubing is filled in a low fluid level well.
Pull Release Subassembly
Standard release requires right-hand rotation which
releases the left-hand thread release coupling. Slight
tension moves the mandrel into the deflate position while
the travel is controlled by the bumper sub housing.
A pull release version is also available which requires
tension to be applied to the workstring in order to shear
the preset shear pins. This option includes a shock
absorber inside the bumper sub housing which cushions
and limits the mandrel travel to the deflate position.
Not recommended for use where the tubing must be
tensioned to operate other downhole equipment.
Ball and Seat plug
The ball and seat plug is used when
the tubing is filled with well fluids
while running in or when circulating
or spotting of fluid is required prior to
setting the packer.
Solid plug
When using a solid plug, a fill-up
sub or fill-up valve is used to fill
the tubing before setting the packer.
111
PIP Options
Non-Rotating Tailpipe
When two or more PIP™ tools are run in the tool string, it
may be undesirable to release them all at the same time.
Excessive torque may be required to turn all mandrels at
once or the pressure imbalance in the hole may make it
desirable to release one tool at a time. The no-turn tailpipe
assembly allows the top tool to be rotationally released and
deflated prior to rotating the next tool.
When tools are run in a straddle configuration and fluid
is injected between them, a large force can be created
that tends to push the tools apart. The no-turn tailpipe is
connected to the element which is capable of withstanding
a larger separating force than that of the PIP mandrel. The
no-turn tailpipe, therefore, gives a straddle section a higher
pressure rating.
Shear Pinned Bottom Sub
Shear pinned Bottom Sub
non-Rotating tailpipe
112
A special shear pinned bottom sub can be adapted to
any size PIP chassis for wellbores that contain close
tolerance restrictions or in horizontal applications where
contact forces may cause wadding of the element. The
element is slightly tensioned by the shear pinned bottom
sub which allows the element to safely pass through
tight spots or withstand the contact force as the element
is being pushed around the bend of a horizontal wellbore.
The shear pins are activated upon inflation of the
element as this drawing action improves the expansion
capability of the tool.
PIP Options
Element Latch System (ELS)
Product Family No. H30043
APPLICATION
The element latch system (ELS) was developed to allow standard
production injection packer (PIP™) tools to be run further into the well,
in either cased-hole or openhole applications, after being released
from the initial set position. The current stand-alone design of the PIP
tools may sometimes cause the elements to wad-up as they encounter
frictional resistance or restrictions. The design of the element latch
system overcomes this obstacle by latching the bottom sleeve of the
element to the lower end of the mandrel, thus allowing the element to
be pulled through the tight spot.
Features/Benefits
„„The
element latch system does not interfere with the inflation
or deflation mechanics of the standard PIP tools
„„Allows the standard PIP tools to be advanced further into the
well after being released from the initial set position
„„Prevents the inflatable element from wadding up by
transmitting all frictional and contact forces to the bottom
sleeve of the element
„„Innovative latch design allows eventual disengagement of the
latch thread, thus allowing simple retrieval if required
„„Compatible with most standard 2.5 in. (63.5 mm) ID
production injection packer (PIP) tools
Specification Guide
element Latch System (eLS)
Thread
Up/Down
Maximum
OD
Minimum
ID
in.
in.
mm
mm
Tensile
Rating
lb
2.875 in. NU
5.25 133.4 2.00 50.8 60,000
10 Rd Pin
Buckling
Resistance
Maximum Draw
of Inflatable
Element
kn
lb
kn
in.
mm
266.9
100,000
444.8
6.00
152.4
element Latch System
Product Family No. H30043
113
114
D r i l l s t e m Te s t To o l s
SPECIFICATION GUIDE
Inflatable DST and Conventional DST
Inflatable Drillstem Test
Optional Equipment for Inflate and/or
Conventional Tools
Conventional Test Tools
Tool OD = 5.0 in. (127.0 mm)
Tool ID = 1.0 in. (25.4 mm)
Maximum Interval = 150.0 ft (46.0 m)
(Longer intervals are available upon request)
OD = 5.0 in. (127.0 mm); 3.75 in. (95.3 mm)
ID = 1.0 in. (25.4 mm); 0.62 in. (15.9 mm)
Minimum Interval = 50.0 ft (1.5 m)
Note: Minimum interval does not allow for recording
equipment in the interval.
Minimum Interval = 5.7 ft (1.75 m)
Note: Minimum interval does not allow for recording
equipment in the interval.
Conventional equipment is available for hole sizes ranging from
3-3/4 in. (95.25 mm) to 12-1/4 in. (311.0 mm)
Specialized/Optional Equipment
1) Dual Inflate Packers
2) Rotating Sub (allows pipe rotation while tripping)
1) High volume reverse circulating sub (pressure
operated bar or drop operated)
2) Slip joint safety valve–in case of emergency
3) A loss in drillpipe tension will close a full-opening
ball valve
4) Positive control sampler: single or dual–volume is
2,000/4,000 CC
5) Sour service surface equipment (NACE specifications)
• Remote control valve
• Floor manifold
• Flow hose
Temperature Range = Maximum temperature is 350°F (176°C)
Inflatable Packer Sizes
Drilled Hole Size
Recommended Packer
in.
mm
in.
mm
5-1/2 - 6-1/8
139.7-155.6
5.00
127.0
6-1/4 - 7-1/2
159.0-190.5
5.63
136.0
7-3/4 - 8-1/4
197-0-209.5
6.25
158.8
8-1/2 - 9-1/2
216.0-241.3
7.00
177.8
9-3/4 - 12
247.7-304.8
7.88
200.2
12-1/4 - 17-1/2
311.0-444.5
10.38
263.0
DST Packer Calipered Hole Size Chart
Pressure (kg/cm2)
150
17.000
200
250
300
350
400
431.8
16.000
406.4
15.000
381.0
14.000
330.2
10.38
12.000
264.2
304.8
11.000
279.4
7.88
10.000
200.2
9.000
177.8
254.0
7.00
228.6
Packer Element OD (in. mm)
Open Hole or Casing ID (in. mm)
355.6
13.000
6.25
8.000
158.8
203.2
5.63
7.000
143.0
177.8
5.00
6.000
127.0
152.4
5.000
127.0
2,000
2,500
3,000
3,500
4,000
4,500
5,000
5,500
Pressure (psi)
115
D r i l l s t e m Te s t To o l s
Inflatable Drillstem Test Tool (DST)
Product Family No. H30240
APPLICATION
The inflatable drillstem test tool is a highly versatile tool in its ability to straddle zones. This
allows a well to be drilled to total depth, logged and then test the zones of interest based on the
log data. The system is ideal for testing zones that may have been overlooked during drilling. In
most cases, the tools can be utilized to test several zones during a single trip of the drillpipe,
saving both rig time and money.
Features/Benefits
„„Inflatable packers offer greater run-in clearance than mechanical packers
„„Seals successfully in holes too large for conventional packers
„„Conforms to the most irregular wellbores and seats in washout and soft formations
„„Flexible steel reinforced rubber element
„„Seals along the entire length of packer
„„Anchors and seats off bottom without cement plugs, hook-wall anchors, or tailpipe
„„Shut-In valve is opened and closed by simply reciprocating the drillpipe for multiple
flow and shut-in periods
„„Multiple settings can be accomplished by simply deflating, repositioning, and
inflating again
„„Electronic data recorder options allow on-site reservoir data processing, hard copy
plots, and data telecommunication using the Baker Hughes DATACAP™ system
Conventional Drillstem Test Tool (DST)
Product Family No. H30201
APPLICATION
Conventional DST tools are designed to test formations as the well is being drilled. The
tool string is assembled at the surface in order to accommodate the particular type of well
conditions. There are several different types of tool strings available. The most common being
a dual packer assembly to isolate the desired zone. The assembly is run to bottom and set-down
weight is used to energize packers.
Features/Benefits
„„Adjustable spacing for testing different length zones
„„Reverse circulating sub to reverse out test fluids when pulling the test string
„„Rotating shut-in valve to open and close the string to formation pressure
„„Positive control sample to recover an uncontaminated sample of formation fluid
„„Hydraulic valve to initially open drillpipe to formation, equalize, and retain recovered fluid
„„Perforated spacing to support the string and provide a passage for formation fluids
„„Electronic data recorder options allow on-site reservoir data processing, hard copy plots
and data telecommunication using the Baker Hughes DATACAP system
116
inflatable dSt
Product Family
No. H30240
conventional dSt
Product Family
No. H30201
D r i l l s t e m Te s t To o l s
J Environmental Test Tool
Product Family No. H32001
APPLICATION
The J™ environmental test tool provides a mechanism
for testing and treating of multiple zones in
environmental, mining, and oilfield applications. The
tool provides the operator with precise information
on pressure fluctuations above, below, and between
isolation packers throughout each test interval. This
information gives the operator another tool to assist him
with accurate evaluation of formation damage, zonal
communication, zonal combination and well productivity
during its life cycle. Advanced downhole electronics
enable the operator to evaluate data from the office, as
events are taking place. This allows time for decisions
to be made on future steps to be taken before the tool
reaches surface. The complete system consists of a
reciprocating shut-in tool, triple quartz-crystal pressure
sensor with special carrier and an upper and lower
packer section used to isolate the test zone.
Features/Benefits
Testing
„„Triple
quartz-crystal pressure sensors provide
accurate real-time pressure measurement
results as events are taking place downhole
„„Inflatable packers for out-of-round and
oversized open hole applications
„„Tool is resettable for testing multiple zones
on same run
„„Adjustable spacing for testing different
length zones
Stimulating
„„Optional
snap-latch type upper packer section
for horizontal applications
„„Spotting position allows specific placement
of treating fluids at the tool
J environmental test tool
Product Family No. H32001
For selective open or cased-hole stimulation, the
pressure sensors and shut-in tool are not required. Also
available is an optional snap-latch style specifically
designed for high angle or horizontal wells.
Snap-Latch Treat and Test Tool
Product Family No. H32901
APPLICATION
The snap-latch treat and test tool is an environmental
J test tool with the jay section replaced by a snap-latch
mechanism. The snap-latch mechanism is a collet
and profile that holds the mandrel in position until a
predetermined amount of force (usually 10,000 lb
[4545 kg]) allows the mandrel to snap out and move to the
next position. This allows the position of the tool (inflate/
deflate, treating, spotting) to be changed by reciprocation
of the workstring rather than with a jay movement. The
tool has found wide usage in horizontal wells.
Features/Benefits
„„Inflatable
elements allow treating of
openhole sections
„„Tool operated by hydraulics and reciprocation–
no rotation required
„„Spotting position allows placement of treating
fluids to the tool
Specification Guide
Minimum Flow Area
Minimum Spacing
in.
Tool OD
mm
in.
Hole ID
mm
in.2
mm2
ft
m
Maximum Spacing
ft
m
2.13
54.0
2.63-4.75
67.0-121.0
0.3
8
2.60
.79
200.00
61
3.50
89.0
4.25-9.00
108.0-229.0
.075
19
5.10
1.55
200.00
61
5.00
127.0
6.25-12.25
159.0-311.0
1.77
45
5.20
1.58
200.00
61
Snap-Latch treat
and test tool
Product Family No. H32901
117
D r i l l s t e m Te s t To o l s
Environmental Surface Controlled Completion System
Product Family No. H32003
APPLICATION
The environmental surface controlled completion system provides a mechanism for testing
multiple zones in environmental, mining, waste disposal, and oilfield applications. The tool
can remain in the hole for several years and has been run with as many as 30 isolation
packers. Optional hydraulically activated sleeves can also be incorporated into the system
for selectively testing and sampling each zone. The tool provides the operator with
precise information on pressure fluctuations above, below, and between isolation packers
throughout each test interval. This information gives the operator another tool to assist
him with accurate evaluation of formation damage, zonal communication, zonal
contamination, or well productivity during its life cycle. Advanced downhole electronics
enable the operator to evaluate data from the office, as events are taking place, allowing
time for decisions to be made on future steps to be taken before the tool reaches surface.
The basic system consists of the workstring tubular, surface inflation tubing, tubular
encased conductor (TEC) systems, a reciprocating shut-in tool, upper packer, triple
quartz-crystal pressure sensor sections with special carriers, and multiple isolation packer
sections. The use of surface inflation tubing makes this tool especially useful in dry holes
where hydraulic pressure activation is difficult.
Features/Benefits
„„Quartz-crystal
pressure sensors provide accurate real-time pressure
measurement results as events are taking place downhole
„„Tool is useful for testing multiple zones over long periods of time
„„Inflatable packers for out-of-round and oversize open hole applications
„„Adjustable spacing for testing different length zones
„„Surface controls systems for testing in dry holes
Specification Guide
Tool OD
Maximum Hole ID
in.
mm
in.
mm
3.50
89.0
4.75
121.0
Maximum Zones Isolated
12
4.63
118.0
6.25
159.0
18
5.63
143.0
8.00
203.0
30
7.88
200.0
10.50
267.0
30
environmental Surface
controlled completion System
Product Family No. H32003
118
Disclaimer of Liability: This information is provided for general information purposes only and is believed to be accurate as of the date hereof; however, Baker Hughes
Incorporated and its affiliates do not make any warranties or representations of any kind regarding the information and disclaim all express and implied warranties
or representations to the fullest extent permissible by law, including those of merchantability, fitness for a particular purpose or use, title, non-infringement, accuracy,
correctness or completeness of the information provided herein. All information is furnished “as is” and without any license to distribute. The user agrees to assume all
liabilities related to the use of or reliance on such information. BAKER HUGHES INCORPORATED AND ITS AFFILIATES SHALL NOT BE LIABLE FOR ANY DIRECT, INDIRECT,
SPECIAL, PUNITIVE, EXEMPLARY OR CONSEQUENTIAL DAMAGES FROM ANY CAUSE WHATSOEVER INCLUDING BUT NOT LIMITED TO ITS NEGLIGENCE.
www.bakerhughes.com
© 2010 Baker Hughes Incorporated. All rights reserved. 30373T