Product Standard Pipe Fitting, Threaded Cap, Class 150

advertisement
Page 1 of 1
Date: September 24, 2015
REV-02
PF.CAP.150.BLK.PRO
Product Standard
Pipe Fitting, Threaded Cap, Class 150, Black
The information below lists the required dimensional, chemical and physical characteristics of the products in this purchase order. If
the order received does not meet these requirements, it may result in a supplier corrective action request, which could jeopardize your
status as an approved vendor.
B
Part
Number
466385
466386
466387
466388
466389
466390
466391
466392
466393
466511
466512
L2
E
F
G
H
P
G1
Outside
Nominal
Thickness Thickness
Width Inside Diameter Metal
Length of Thread
Diameter Height
Pipe Size
of Fittings
Thickness
of Ribs of Flat Top
of Band
of Band
of Side
Caps
Min.
Min.
Min.
Max.
Min.
Min.
Min.
1/8
.25
.2639
.20
.43
.40
.09
.69
.53
1/4
.32
.4018
.21
.58
.54
.09
.84
.63
3/8
.36
.4078
.23
.72
.67
.10
1.01
.74
1/2
.43
.5337
.25
.90
.84
.10
1.20
.87
.10
3/4
.50
.5457
.27
1.11
1.05
.12
1.46
.97
.12
.13
1
.58
.6828
.30
1.38
1.31
.13
1.77
1.16
.13
.15
1 1/4
.67
.7068
.34
1.73
1.66
.14
2.15
1.28
.14
.17
1 1/2
.70
.7235
.37
1.97
1.90
.15
2.43
1.33
.15
.19
2
.75
.7665
.42
2.44
2.37
.17
2.96
1.45
.17
.22
2 1/2
.92
1.1375
.48
2.97
2.87
.21
3.59
1.70
.21
.25
3
.98
1.2000
.55
3.60
3.50
.23
4.28
1.80
.23
.29
Note:
Cap sizes 1/8, 1/4 and 3/8 may be alternatively be made from steel rod with a minimum yield
strength of 30 ksi at the option of the manufacturer. When made from steel rod, diameters shall be 0.50”,
0.69” and 0.84” respectively.
Caps made from steel rod may have no recess. If no recess, dimension P shall be sufficient to provide a
thread length of perfect threads not less than dimension B above, with fully formed thread roots and crests
not less than L2 (effective length of external thread) per ASME B1.20.1
Specification Requirements:
•
•
Dimensions:
Material &
Mechanical Properties:
Threads:
Product Marking:
•
Finish:
•
•
ASME B16.3, Class 150
Malleable iron per ASTM A197
ANSI/ASME B1.20.1 NPT
1) Country of origin
2.) Manufacturer’s ID
Black, with light protective oil on exposed threads
Download