1 of 1
Intense Lighting Installation Instructions
IVt104 / IVT104LED Landscape Bullet
CAUTION: TO REDUCE RISK OF SHOCK, TURN Off electrical supply BEFORE Installing / SERVICING THE FIXTURES.
WARNING: LAMP WILL BE HOT. ALLOW LAMP TO COOL BEFORE ATTEMPTING TO REPLACE LAMP.
IMPORTANT: Read all
instructions before
starting installation.
Keep instructions for
future reference.
(Do Not Use Bare Hand To Replace Lamp In Fixture)
WARNING: Fixture must be installed in a accordance of National Electrical Code (NEC) and/or any local codes.
Failure to do so may result in serious injury and/or damage to the fixture.
Safety Warning Regarding Lamp Replacement:
Fluorescent and Hid lamps contain a small amount of mercury as indicated by the Hg mark. Follow disposal laws. See www.lamprecycle.org. (LED fixtures do not contain mercury).
Recommend tools
1. Allen Wrench 2 mm
2. Allen Wrench 3 mm
[2]
3. Silicone filled wire nuts or low voltage wire connector. (By
others)
[1]
Installation:
1.
2.
Figure 1
Figure 2
Angle adjustment screw
3.
4.
5.
6.
7.
Make sure all electrical power is Off before starting installation
To install lamp (Non-LED only): Loosen set screw [1] and remove lens cover [2]. (See Figure 1).
Install lamp of type and wattage per fixture label. Caution: Do not exceed maximum wattage marked on fixture label.
Replace cover and tighten set screw.
Loosen set screw (Fig 3) To adjust angle of illumination.
Junction box mount: Insert lead wires through 1/2” threaded opening on watertight junction box (by others). Thread fixture base into cover. Attach lead
wires to low voltage leads from transformer. Rotate fixture in base to desired orientation and tighten set screw (Figure 3).
Optional stake accessory mount: Feed lead wires through adapter sleeve and thread onto base. Place wires in slot on stake and thread into adapter
sleeve.
Push assembly into desired location (Figure4) and attach lead wires to low voltage feed wires. Make final aiming adjustments.
Maintenance:
1.
2.
Rotation
set screw
3.
Figure 3
4.
Make sure all electrical power is Off before servicing.
For lamp replacements (Non-LED only): Loosen set screw [1] and remove lens cover [2]. (See Figure 1).
Install lamp of type and wattage per fixture label. Caution: Do not exceed maximum wattage marked on fixture label.
(Do not touch the lamp at any time). Use a soft cloth or suitable gloves. Oil from skin may damage lamp). Do not operate luminaire with a missing or
damaged (cover lens).
Lens should be kept clean and free of any debris or calcium build-up. Intense Lighting recommends
regular scheduled cleaning.
NOTES : To protect your investment, Intense Lighting recommends regularly scheduled cleaning of the stainless steel to prevent “tea staining” from occurring.
The cleaning schedule will need to be determined based on environmental factors; costal area with salt in the air would require cleaning weekly verses more
inland installations would be monthly. “Tea staining” is defined as a discoloration of the metal surface. It occurs when the metal is exposed to salts, or corrosive
environments. Be assured our 316 marine grade stainless steel is the best specification available to prevent corrosion of the fixture. “Tea staining” is not
corrosion. There are many articles available on the internet. If you choose to learn more go to the Intense web site and search for technical library.
Figure 4
LIMITED warranty:
Intense Lighting warrants its properly installed products to be free of defects in material and workmanship in normal use for a period of one year from the date of our shipment. Certain products may have a
longer warranty period as noted on the product’s specification sheet; Intense Lighting will repair or replace, at its option, any warranted product returned to it that is determined to be defective. This limited
warranty does not include installation or removal, nor does it include lamps, transformers or ballasts, which are covered by their respective manufacturers. To receive credit for a defective product, product must
undergo quality inspection prior to the processing of credit. If the product is found defective, you will be issued a credit. Product in good working condition will not receive a credit. Please inform your accounting
department not to short pay or issue any debits to Intense Lighting regarding a return. Testing and evaluation can take approximately 1-2 weeks based on quantity. At that time you will be notified if credit is
granted for your warranty return.
THE ABOVE EXPRESS WARRANTY STATES THE FULL AND COMPLETE OBLIGATION OF INTENSE LIGHTING. ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN
DURATION TO THE TERM OF THE EXPRESS WARRANTY. UNDER NO CIRCUMSTANCES WILL INTENSE LIGHTING ACCEPT LIABILITY FOR ANY CONSEQUENTIAL, SPECIAL OR INDIRECT DAMAGES WHETHER ARISING OUT OF
CONTRACT, TORT, OR STRICT LIABILITY.
950015 Rev: 05/30/2012 P20
Intense Lighting, LLC: 2861. E. La Palma Ave. Anaheim, CA 92806 Phone: 800 961 5321 Fax: 800 961 5322 www.intenselighting.com