PC Mimic Diagram
PCMD Standalone Install
Version:
3.5.374
Contents
1
Introduction.................................................................................................................................. 3
1.1
Terms and Abbreviations............................................................................................................... 3
2
Installation.................................................................................................................................... 4
2.1
Post-installation actions (on first startup)..................................................................................... 15
2.1.1
Visio 2003
15
2.1.2
Visio 2007
16
2.1.3
Visio 2010
18
PCMD Standalone Install
Version 3.5.374
Schneider Electric Limited
2 of 18
1 Introduction
1.1 Terms and Abbreviations
PCMD
PCMD Standalone Install
Version 3.5.374
PC Mimic Diagram.
Schneider Electric Limited
3 of 18
2 Installation
Run the PC Mimic Diagram Setup program and the following Setup Wizard dialog is displayed.
Click on the Next button to proceed with the setup.
PCMD Standalone Install
Version 3.5.374
Schneider Electric Limited
4 of 18
Read the License agreement, if you don't wish to accept the agreement click on the Cancel button.
Otherwise click on the I Agree button.
PCMD Standalone Install
Version 3.5.374
Schneider Electric Limited
5 of 18
Leave the Standard Installation type option selected.
Click on the Next button to continue with the setup.
The setup program will attempt to search for a license key on any removable media:
Click OK to continue.
PCMD Standalone Install
Version 3.5.374
Schneider Electric Limited
6 of 18
If the setup program found a PCMD license the Company Name will have been filled in. Otherwise,
enter your Company Name, this will be used to register your copy of the PC Mimic Diagram application.
Click on the Next button to continue with the setup.
PCMD Standalone Install
Version 3.5.374
Schneider Electric Limited
7 of 18
Check the components to be installed. This should normally include the Main Application. Example
diagram components can be installed now or the Setup can be run again at a later stage to add these
components.
Click the Next button to continue with the setup.
PCMD Standalone Install
Version 3.5.374
Schneider Electric Limited
8 of 18
Choose the installation folder for the PC Mimic Diagram application. The default folder should normally
be used.
Click the Next button to continue with the setup.
PCMD Standalone Install
Version 3.5.374
Schneider Electric Limited
9 of 18
Choose the installation folder for the PC Mimic Diagram data, the default folder should normally be
used.
Click the Next button to continue with the setup.
PCMD Standalone Install
Version 3.5.374
Schneider Electric Limited
10 of 18
Choose the location of the folder to store PC Mimic Diagram user data, i.e. Switching List exports,
Reports, Logs etc. This should be left blank if the data is not to be shared between Windows user
accounts and will default to \My Documents\My PCMD for each Windows user. If the user data is to be
shared, a folder should be specified that is always accessible to all Windows users, e.g. on a file
server, G:\PCMD User Data.
Click the Next button to continue with the setup.
PCMD Standalone Install
Version 3.5.374
Schneider Electric Limited
11 of 18
Choose the installation folder for the PC Mimic Diagram Reference data, the default folder should
normally be used.
Click the Next button to start the installation.
PCMD Standalone Install
Version 3.5.374
Schneider Electric Limited
12 of 18
The installation has been completed and the installation log can be reviewed, click the Next button to
continue.
PCMD Standalone Install
Version 3.5.374
Schneider Electric Limited
13 of 18
The PC Mimic Diagram installation has completed. Check the Show Readme check box if it is to be
displayed. Click on the Finish button.
You have successfully installed the PC Mimic Diagram application.
The PC Mimic Diagram application can now be launched either from the Desktop Icon or from the
Windows Start Programs Menu.
The startup of the PC Mimic Diagram application will then continue.
Note, the password for all users in the default configuration are set to SchneiderElectric
PCMD Standalone Install
Version 3.5.374
Schneider Electric Limited
14 of 18
2.1
Post-installation actions (on first startup)
When the PC Mimic Diagram application is run for the first time, Visio will give a warning about the
macros contained within the PCMD application. The signed certificate for the PCMD macros must be
enabled by following the instructions for the appropriate version of Visio.
2.1.1 Visio 2003
The following Security Warning will be displayed by Visio as the application contains macros.
Check the Always trust macros from this publisher check box.
Click the Enable Macros button.
PCMD Standalone Install
Version 3.5.374
Schneider Electric Limited
15 of 18
2.1.2 Visio 2007
A security warning will be displayed below the Visio toolbars as the application contains macros.
Click on 'Options...' to view the security alert.
Check the Trust all documents from this publisher check box.
PCMD Standalone Install
Version 3.5.374
Schneider Electric Limited
16 of 18
Click on the OK button to enable the macros.
PCMD Standalone Install
Version 3.5.374
Schneider Electric Limited
17 of 18
2.1.3 Visio 2010
A security warning will be displayed below the Visio toolbars as the application contains macros.
Click on ’Enable Content' to enable macros.
A security notice will also be displayed the first time a PCMD diagram is opened as the
application and diagram contains macros. Click on ‘Trust all from publisher’ to enable the
macros.
PCMD Standalone Install
Version 3.5.374
Schneider Electric Limited
18 of 18