Wireline Adapter Kit
Connects the MDF and MDFBB permanent production packers to a wireline assembly
APPLICATIONS
■■
Setting on electric wireline, using the
combination of a power charge and a
pressure setting assembly
ADVANTAGES
■■
■■
■■
■■
■■
Accurate location in the well by correlating
position with well logs
The wireline adapter kit is used to connect the MDF and MDFBB
permanent production packers and similar equipment to a wireline
pressure setting assembly or a hydraulic setting tool. Actuation of
the explosive applies pressure to the adapter sleeve, setting the
packer. At a predetermined force, a tension stud parts, releasing
the colletstyle running nut from the packer. The adapter kit is
retrieved with the wireline and pressure setting assembly.
May be set with industry standard E-line
or hydraulic setting tools
Simple to install with only three
major parts
No special tools required
Able to be installed in a shorter time than
with tubular conveyed methods
Wireline adapter kit.
Copyright © 2014 Schlumberger. All rights reserved. 14-CO-0201
slb.com/packers