FLEXIBLE CONDUCTORS
SOLUTIONS TO OPTIMIZE THE DESIGN
OF ELECTRICAL POWER & EARTH/GROUND
CONNECTIONS
WARNING
Pentair products shall be installed and used only as indicated in Pentair’s product instruction sheets and training materials. Instruction sheets are
available at www.erico.pentair.com and from your Pentair customer service representative. Improper installation, misuse, misapplication or other failure
to completely follow Pentair’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and/or death, and void
your warranty.
www.erico.pentair.com
Summary
Flexible conductors for multiple applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
Certificates & software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Product overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
ERIFLEX FLEXIBAR Insulated flexible busbar. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-15
ERIFLEX FLEXIBAR accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-19
Hydraulic and manual tools for busbar & ERIFLEX FLEXIBAR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20-21
Insulated braided conductor (IBS, IBSB & IBSBR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22-29
Earth/ground copper braids (MBJ & BJ). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30-31
Earth/ground stainless steel braids (CPI). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32-33
Power shunt (PBC, PBCR & PPS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34-35
Flat copper & stainless steel braids in coils (FTCB, FRCB, FSSB & FTCBI). . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Round and tubular copper braids in coils (RTCBI, RTCB, RRCB, RRCBI & TTCE) . . . . . . . . . . . . . . . . . . 37-38
Make your own braided connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Made-to-order solutions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40-41
Cross reference list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42-44
www.erico.pentair.com
1
Flexible Conductors for Low-Voltage Industrial Applications
The Pentair Advantages
• Full range of high-quality, reliable, certified
products
• Innovative and compatible product designs
• Easy to use – saves time and space
• Maximize power density
• A solution provider with strong expertise in
a variety of markets worldwide
• A worldwide team of experts in electrical
power connections
• Experienced manufacturer and global
provider
Energy
• E lectrical Power
Generators and
Distribution
- Transformers
- Generators
• Renewable Energies
- Windmills
- Solar
- Hydropower
• Oil, Gas and Petrochemical
• Telecom
• Power Stations
Transportation
• Marine
• Aircraft
• Ground Transportation
• Automotive
2
www.erico.pentair.com
Industry & Buildings
• Buildings & Shopping Centers
• Air Conditioning
• Elevators, Escalators & Automatic Doors
Panelboard
• Power
• Control & Command Applications:
- Power Switchboards
- Distribution Panel
- UPS
- Power Factory Correction
Machinery
• Tunneling
• Crunchers
• Printing
• Welding
• Packaging
• Wood Working
www.erico.pentair.com
3
Flexible Conductors for Multiple Applications
Pentair is trusted for producing high quality flexible conductors for low voltage power connections.
Flexible conductors made out of braids or laminates are used in a variety of applications for current
transfer or grounding/earthing connections.
Expansion connections for busbar system
Busbar and active electrical component
connection (Example: circuit breaker,
contactor) including most compact
components on the market
Flexible connection between fixed and
moving parts
Outdoor/offshore application or difficult
environment (Example: abrasion,
corrosion, UV...)
Earthing/grounding interconnection
(Example: pipeline)
Earthing/grounding connection with
excellent electro-magnetic compatibility
Short and compact connection between
electrical components for volume
reduction
4
www.erico.pentair.com
Flexible Conductors for Multiple Applications
Vibration and reliability solution for
connection
Worldwide certifications, applications and
product availability
Connection for alternating current or
direct current application
Reduce time assembly or maintenance
connection
Motor, generator or transformer
connection with busbar system
Power connection between horizontal and
vertical system
Complicated and difficult connection for
specific application
www.erico.pentair.com
5
Certificates & ERICO Software
Tests & Certificates
ERICO components have received conformity certificates from several agencies/standards.
Worldwide Certification
UL
®
CSA
®
IEC
Agency/Standard Approvals
International Electrotechnical Commission
IEC 60439.1 Standard
IEC 61439.1 Standard
GOST
Underwriters Laboratories
UL Recognized, File No. E125470
UL Recognized, File No. E220029
UL Recognized, File No. E316390
UL Listed, File No. E220029
Canadian Standards Association
CSA Certified, File No. LL 90005
ABS®
VERITAS
ABS American Bureau of Shipping
Certificate No. 08-HS365878-1-PDA-DUP &
Certificate No. 13-HS1018106-1-PDA-DUP
Marine & Offshore Applications
CE
European Conformity
Bureau VERITAS
Certificate No. 02859 / DO BV for
shipboard use
Interactive ERIFLEX Software Available
Online from Pentair
GOST
Certificate compliance for Russia
With the click of a mouse, Pentair makes it easy to create a
technical panel layout with all of the necessary components.
Available at www.erico.pentair.com/eriflex, this interactive
software walks the user through the creation of a project
with easy to follow instructions. The software features
updated pricelists, informative product datasheets and a
project installation calculator.
RoHS Compliant
Whether you’re interested in making a complete lowvoltage busbar system or a distribution kit, or if you need to
determine a flexible connection with ERIFLEX FLEXIBAR, you
can trust ERICO software to help simplify the process.
In fact, the software will provide you with technical and
commercial datasheets dedicated to your project.
For more information or to request your personal login
information, contact your local Pentair representative or visit
www.erico.pentair.com/eriflex.
Early involvement of Pentair experts results in
optimal solutions:
• Compact Solution
• Quality Environment
• Compliance
• Cost Effective
www.erico.pentair.com/eriflex
6
www.erico.pentair.com
Product Overview
Product Range
Insulated flexible busbar
(ERIFLEX FLEXIBAR)
Typical Uses
Typical Market
• Heavy-duty power interconnection
• Switchgear & control equipment
• Overcome vibration/alignment problems
• Transport
• Circuit breaker, generator & prefabricated
power network conductor
• Electrical equipment manufacturers
• Expansion joints
• Machinery manufacturer
• Power generation
• Variable terminating positions
• Machine connections
• Movable connection from massive busbar
system
• Alternative to large & multiple cables
• Alternative to rigid busbar
Insulated braided conductor
(IBS, IBSB & IBSBR)
• Interconnects for low voltage power
distribution units
• Switchgear & control equipment
• IBSB specially designed for industrial circuit
breaker connection
• Electrical equipment manufacturers
• Overcome vibration/alignment problems
• Transport
• Power generation
• Battery connections
• Earth/ground connections
Power shunt
(PBC, PBCR & PPS)
Earth/ground copper braids
(MBJ & BJ)
• Transformer or generator to busbar connection
• Switchgear & control equipment
• Overcome vibration/alignment problems
• Power distribution
• Power interconnection
• Transportation
• Power, earthing/grounding and equipotential
connections
• Switchgear & control equipment
• Electrical bonding enclosure door
• Electrical equipment manufacturers
• EMI effect reduction application
• Power generation (wind, solar)
• Rail transportation
• Data center
Earth/ground stainless steel braids (CPI)
• Earthing/grounding and equipotential
connections
• Transportation
• Superior abrasion, corrosion, chemical, and UV
resistance for outdoor applications
• Power generation (wind, solar)
• Expansion joints
• Connections for lightning protection systems
• Food and beverage industry
• Chemical and oil industry
• Automotive
• Defense & aerospace
• Civil construction
• Urban projects
Flat and round copper braids in coils
• Earth/ground connections
• Defense & aerospace
• Power interconnection
• Rail transportation
• Lightning protection
• Automotive
• Flexible links
• Electronics
• Overcome vibration/alignment problems
• General electrical sector
• Civil construction
Tubular copper braids in coils
www.erico.pentair.com
• Screening of cables from electromagnetic,
electrostatic and RF interference
• Defense & aerospace
• Mechanical support
• Electronics & communication
• Protection against abrasion and corrosion
• Cable harness & assembly makers
• EMC & EMH applications
• Component distributors
7
• Transportation
ERIFLEX FLEXIBAR - Insulated Flexible Busbar
NEW Generation Flexible Busbar
Patent pending insulation on ERIFLEX FLEXIBAR
ERIFLEX FLEXIBAR Flexible
Busbar - a preferred conductor
• ERIFLEX FLEXIBAR is formed with multiple
layers of thin electrolytic copper, available in
plain or tin plated
• ERIFLEX FLEXIBAR connections are made
by punching directly through the laminates.
There are no lugs to purchase, helping to
eliminate faulty connection problems and
making installation simpler and faster
• The insulation is a high-resistance, selfextinguishing PVC or silicone compound
• Traceability code and designation Part
Number on product
• Easily formed, ERIFLEX FLEXIBAR improves
assembly flexibility and aesthetics of panels
• Ideal alternative to large cable & rigid busbar
• Quality: 100% production dielectric tested
• Full range from 24 mm2 up to 1200 mm2
Superior Flexibility
Pentair’s exclusive manufacturing process offers superior
flexibility:
• Copper laminates are free to slide within the insulation
• High insulation quality
• Wide variety of bending, twisting & folding possibilities
NEW
Diverse Applications
Innovative patent pending insulation*
ERIFLEX FLEXIBAR has added grooves on the inner surface of
the insulation sleeve to improve sliding between the central
conductor and the insulation material. The grooves help
reduce the contact surface between the central conductor
and the insulation material. This results in improved flexibility
of the flexible busbar. Result: <20% of the inner surface is
in contact with the central conductor. This Pentair patentpending idea makes ERIFLEX FLEXIBAR more flexible than
ever, and allows users to optimize the design of their
electrical power connection.
• Usage -25°C up to 105°C (-13°F up to 221°F)
ERIFLEX FLEXIBAR
• Nominal voltage = 1000 V AC/1500 V DC
(IEC & UL®)
• Self-extinguishable
• High mechanical resistance
• High elongation value
• High current withstanding
• High copper quality (99.9% purity)
• High conductivity
* This patent is applicable for the cross section indication by “*” on the part number.
Refer to table on page 13
8
www.erico.pentair.com
ERIFLEX FLEXIBAR - Insulated Flexible Busbar
Connection Types
-
Between main power and distribution
equipment (contactors, circuitbreakers...)
- Between transformer and busduct
- Between busduct and electrical cabinet
Space/Weight Savings
-Requires less installation space when
compared to cable
-Reduces the length and number
of conductors, reducing weight
-Insulation allows for closer spacing
than traditional busbar designs.
Cost Savings
-Eliminates cost and installation of lugs
-Reduces inventory costs
Skin Effect on A.C. Application
Comparison of the
penetration depth between:
1 x 95 mm2
Copper Cable
1 x ERIFLEX
FLEXIBAR
2 x 20 x 1
40 mm2
OR
95 mm2
250 A
58%
Smalle
r
2 x 150 mm2
Copper Cables 1 x ERIFLEX
FLEXIBAR
5 x 32 x 1
160 mm2
OR
300 mm2
630 A
Improves Reliability
-
Connection is made directly to
ERIFLEX FLEXIBAR thus eliminating
the cable lug connection
-Excellent resistance to vibration
-No crimping
Aesthetics
47%
Smalle
r
-
Improves design flexibility and
panel access
3 x 185 mm2
Copper Cables
OR
555 mm21000 A
Ease of Installation
-
Installation is facilitated through the
ease of bending and shaping even
large sizes
1 x ERIFLEX
FLEXIBAR
6 x 50 x 1
300 mm2
46%
Smalle
r
Volume
-25%
CABLE
ERIFLEX
FLEXIBAR
BUSBAR
= Conductor
= Reduced Conductivity
= Insulation
ERIFLEX FLEXIBAR
-40%
Time saving &
improved reliability
Representative to scale.
ERIFLEX FLEXIBAR intensity and cable intensity
are based on conductor temperature rise of 50˚C.
www.erico.pentair.com
9
ERIFLEX FLEXIBAR Technical Characteristics
ERIFLEX FLEXIBAR
Insulated Flexible Busbar
Technical Characteristics
• Conductor is electrolytic copper (Cu-ETP)
• Insulation is high-resistance vinyl compound:
- Elongation: 370%
- Maximum working temperature: 105ºC
- Minimum working temperature: -25ºC
- Thickness: 2 mm ± 0,2
- Self-extinguishing: UL® 94 VO
- Dielectric strength: 20kV/mm
Selection of ERIFLEX FLEXIBAR according to the
internal temperature of the panel
Ambient
temperature
Internal
temperature
of panel (T1)
Temperature of
conductors (T2)
Temperature rise of conductor = T2 - T1 = ∆T (K)
ERIFLEX FLEXIBAR in parallel
Ex: For a current of 630A, with: T1 = 40ºC - T2 = 90ºC
When using 2 or 3 ERIFLEX FLEXIBAR on edge in
parallel for the same phase, use the coefficient:
1) ∆T = 90 - 40 = 50K
2) In the 50ºK column, find the closest current value to
630A. ERIFLEX FLEXIBAR 5x32x1 - 552650 160 mm2 - 640A.
3) S elect ERIFLEX FLEXIBAR according to the terminal
width of the equipment being connected.
Ex: 5 x 32 x 1 - ∆Tº = 50 K: 640 A
2 bars in parallel > 640 A x 1,72 = 1100 A
3 bars in parallel > 640 A x 2,25 = 1440 A
K = Kelvin degree (temperature calculated, but not measurable)
10
www.erico.pentair.com
ERIFLEX FLEXIBAR Technical Characteristics
A
Part
Number
∆T (K)
Section
mm2
125 A
20
552400
552410
552420
552440
552390
8
3
6
3
2
x
x
x
x
x
6
9
9
13
15,5
x
x
x
x
x
0,5
0,8
0,8
0,5
0,8
24
21,6
43,2
19,5
24,8
196
158
290
198
252
182
147
269
184
234
166
134
245
167
212
143
120
220
150
191
128
104
190
130
165
105
85
155
106
134
1,72
1,72
1,72
1,72
1,72
2,25
2,25
2,25
2,25
2,25
250 A
30
552430
552450
552460
552490
552500
552550
9
6
4
2
3
2
x
x
x
x
x
x
9
13
15,5
20
20
24
x
x
x
x
x
x
0,8
0,5
0,8
1
1
1
64,8
39
49,6
40
60
48
314
300
380
326
428
450
291
277
350
300
395
416
265
253
320
275
360
380
237
226
286
246
323
340
206
196
248
214
280
295
168
160
202
174
228
240
1,72
1,72
1,72
1,72
1,72
1,72
2,25
2,25
2,25
2,25
2,25
2,25
400 A
40
552470
552480
552510
552520
552530
552560
552570
552620
552630
552690
6
10
4
5
6
3
4
2
3
2
x
x
x
x
x
x
x
x
x
x
15,5
15,5
20
20
20
24
24
32
32
40
x
x
x
x
x
x
x
x
x
x
0,8
0,8
1
1
1
1
1
1
1
1
74,4
124
80
100
120
72
96
64
96
80
476
538
476
498
546
490
550
480
570
538
440
498
440
460
506
453
510
445
525
500
402
455
402
420
462
413
465
406
480
455
360
407
360
376
413
370
416
363
430
406
318
352
312
326
358
320
360
315
372
352
254
288
254
266
292
261
294
257
304
288
1,72
1,72
1,72
1,72
1,72
1,72
1,72
1,72
1.72
1.72
2,25
2,25
2,25
2,25
2,25
2,25
2,25
2,25
2,25
2,25
500 A
50
552580
552590
552640
552700
552710
552760
5
6
4
3
4
3
x
x
x
x
x
x
24
24
32
40
40
50
x
x
x
x
x
x
1
1
1
1
1
1
630 A
60
552540
552600
552650
552660
552720
552770
10
8
5
6
5
4
x
x
x
x
x
x
20
24
32
32
40
50
x
x
x
x
x
x
1
1
1
1
1
1
800 A
70
552610
552670
552730
552780
552830
552880
10
8
6
5
4
3
x
x
x
x
x
x
24
32
40
50
63
80
x
x
x
x
x
x
1
1
1
1
1
1
1000 A
B
552680
552740
552750
552790
552800
552840
552850
552890
552900
10
8
10
6
8
5
6
4
5
x
x
x
x
x
x
x
x
x
32
40
40
50
50
63
63
80
80
x
x
x
x
x
x
x
x
x
1
1
1
1
1
1
1
1
1
1250 A
A
552810
552860
552910
552950
552960
10
8
6
5
6
x
x
x
x
x
50
63
80
100
100
x
x
x
x
x
1
1
1
1
1
1600 A
N
Current
Coefficient
552870
552920
552930
552970
552980
552990
538650
10
8
10
8
10
12
10
x
x
x
x
x
x
x
63
80
80
100
100
100
120
x
x
x
x
x
x
x
1
1
1
1
1
1
1
120
144
128
120
160
150
200
192
160
192
200
200
240
256
240
250
252
240
320
320
400
300
400
315
378
320
400
500
504
480
500
600
630
640
800
800
1000
1200
1200
608
670
648
617
727
700
762
802
758
846
900
860
948
1018
1018
1100
1010
980
1230
1230
1400
1225
1393
1220
1437
1200
1390
1650
1650
1627
1635
1843
1895
1895
2100
2147
2350
2500
2755
563
620
600
570
673
650
706
743
702
783
832
795
877
943
943
1016
935
906
1140
1140
1295
1135
1290
1125
1330
1110
1285
1525
1525
1505
1515
1705
1755
1755
1945
1990
2170
2315
2550
514
566
548
522
615
592
645
678
640
715
760
727
800
860
860
930
855
827
1040
1040
1181
1035
1175
1030
1215
1015
1175
1395
1395
1375
1385
1550
1600
1600
1775
1815
1985
2115
2330
460
506
490
466
550
530
576
606
573
640
680
650
716
770
770
830
763
740
930
930
1055
925
1050
920
1085
906
1050
1245
1245
1230
1235
1393
1435
1430
1585
1625
1775
1890
2070
398
438
425
405
476
460
500
525
496
555
590
563
592
667
667
718
661
640
805
805
915
802
912
797
941
785
910
1080
1080
1065
1070
1205
1240
1240
1375
1405
1535
1636
1792
325
358
347
330
389
374
408
429
405
452
481
460
506
544
544
588
541
523
658
658
747
655
743
651
768
642
743
882
882
870
876
980
1012
1012
1123
1148
1255
1338
1474
1,72
1,72
1,72
1,72
1,72
1,72
1,72
1,72
1,72
1,72
1,72
1,72
1,72
1,72
1,72
1,72
1,65
1,65
1,72
1,72
1,72
1,72
1,72
1,65
1,65
1,65
1,65
1,72
1,65
1,65
1,6
1,6
1,65
1,65
1,65
1,6
1,6
1,6
1,49
2,25
2,25
2,25
2,25
2,25
2,25
2,25
2,25
2,25
2,25
2,25
2,25
2,25
2,25
2,25
2,25
2,12
2,12
2,25
2,25
2,25
2,25
2,25
2,12
2,12
2,12
2,12
2,25
2,12
2,12
2,02
2,02
2,12
2,12
2,12
2,02
2,02
2,02
1,95
ADMISSIBLE CURRENTS: This table indicates the temperature rise produced by chosen current in the given section. This calculation does not take into
account the heat dissipation from the switch gear.
www.erico.pentair.com
11
ERIFLEX FLEXIBAR Certifications & Approvals
ERIFLEX FLEXIBAR Voltage Rating
• Maximum continuous voltage: 1000 VAC and
1500 VDC, UL® & IEC
ERIFLEX FLEXIBAR Insulated Flexible Busbar
Certification & Approvals
• International Commission Electrotechnique (IEC) Meets all requirements of IEC 60439.1 &
IEC 61439.1
• Canadian Standards Association - CSA® certified as
appliance wiring material for a maximum of 1000
volts. File Nº 090005 (CAN/CSA - C22.2)
• UL 67 Recognized component in the “Panelboard
and Switchboard accessories - component”
category (UL file E125470) for US and Canadian
territory
• American Bureau of Shipping (ABS®) - Certificate
No. 08-HS365878-1-PDA-DUP - Marine &
Offshore Applications
• UL 758 Recognized component in the “Appliance
wiring material - component” category style
10531 (UL file E316390) and category style 11343
(UL file E316390)
• GOST Certificate Compliance - for Russia
• CE Conformity
• RoHS Compliance
• Class II Conductors (IEC 61439-1, Chapter 8.4.4 Protection by total insulation)
• Veritas Certified - No. 02859/DOBV. Ship
application
12
www.erico.pentair.com
ERIFLEX FLEXIBAR Part Numbers
2 Meters Red Copper
Part
Number
ERIFLEX FLEXIBAR
Description
552400
552410
552420
552430
552440
552450
552390
552460
552470
552480
2M 8 x 6 x 0,5
2M 3 x 9 x 0,8
2M 6 x 9 x 0,8
2M 9 x 9x 0,8
2M 3 x 13 x 0,5
2M 6 x 13 x 0,5
2M 2 x 15,5 x 0,8
2M 4 x 15,5 x 0,8
2M 6 x 15,5 x 0,8
2M 10 x 15,5 x 0,8
10
10
10
10
10
10
10
10
10
10
0,35
0,43
0,81
1,19
0,45
0,79
0,51
1,02
1,50
2,20
552490
552500
552510
552520*
552530*
552540*
2M 2 x 20 x 1
2M 3 x 20 x 1
2M 4 x 20 x 1
2M 5 x 20 x 1
2M 6 x 20 x 1
2M 10 x 20 x 1
5
5
5
5
5
5
1,05
1,42
1,78
2,15
2,41
3,99
552550
552560
552570
552580*
552590*
552600*
552610*
2M 2 x 24 x 1
2M 3 x 24 x 1
2M 4 x 24 x 1
2M 5 x 24 x 1
2M 6 x 24 x 1
2M 8 x 24 x 1
2M 10 x 24 x 1
5
5
5
5
5
5
5
1,24
1,68
2,12
2,55
2,99
3,87
4,75
552620
552630
552640
552650*
552660*
552670*
552680*
2M 2 x 32 x 1
2M 3 x 32 x 1
2M 4 x 32 x 1
2M 5 x 32 x 1
2M 6 x 32 x 1
2M 8 x 32 x 1
2M 10 x 32 x 1
5
5
5
5
5
5
5
1,62
2,20
2,78
3,36
3,94
5,10
6,27
552690
552700
552710
552720*
552730*
552740*
552750*
2M 2 x 40 x 1
2M 3 x 40 x 1
2M 4 x 40 x 1
2M 5 x 40 x 1
2M 6 x 40 x 1
2M 8 x 40 x 1
2M 10 x 40 x 1
5
5
5
5
5
5
5
1,99
2,72
3,44
4,16
4,89
6,33
7,78
552760
552770*
552780*
552790*
552800*
552810*
2M 3 x 50 x 1
2M 4 x 50 x 1
2M 5 x 50 x 1
2M 6 x 50 x 1
2M 8 x 50 x 1
2M 10 x 50 x 1
5
5
5
2
2
2
3,37
4,27
5,17
6,07
7,87
9,68
552830*
552840*
552850*
552860*
552870*
2M 4 x 63 x 1
2M 5 x 63 x 1
2M 6 x 63 x 1
2M 8 x 63 x 1
2M 10 x 63 x 1
2
2
2
2
2
5,34
6,48
7,61
9,88
12,14
552880
552890*
552900*
552910*
552920*
552930*
2M 3 x 80 x 1
2M 4 x 80 x 1
2M 5 x 80 x 1
2M 6 x 80 x 1
2M 8 x 80 x 1
2M 10 x 80 x 1
2
2
2
2
2
2
5,32
6,75
8,19
9,62
12,49
15,37
552950*
552960*
552970*
552980*
552990*
538650*
2M 5 x 100 x 1
2M 6 x 100 x 1
2M 8 x 100 x 1
2M 10 x 100 x 1
2M 12 x 100 x 1
2M 10 x 120 x 1
2
2
2
2
2
1
10,20
11,99
15,57
19,16
22,74
22,90
Kg
All ERIFLEX FLEXIBAR cross sections can be bent,
folded or twisted with a very small bending radius for
shorter and more compact power connections, from
125A up to 4500A applications.
3 Meters Red Copper
ERIFLEX FLEXIBAR
Description
541020
541060
541070
3M 6 x 9 x 0,8
3M 4 x 15,5 x 0,8
3M 6 x 15,5 x 0,8
5
5
5
1,22
1,53
2,25
541090
541100
541110
3M 2 x 20 x 1
3M 3 x 20 x 1
3M 4 x 20 x 1
5
5
5
1,58
2,13
2,67
541150
541160
541170
541180*
3M 2 x 24 x 1
3M 3 x 24 x 1
3M 4 x 24 x 1
3M 5 x 24 x 1
5
5
5
5
1,86
2,52
3,18
3,83
541230
541240
541250*
541260*
541270*
3M 3 x 32 x 1
3M 4 x 32 x 1
3M 5 x 32 x 1
3M 6 x 32 x 1
3M 8 x 32 x 1
2
2
2
2
2
3,30
4,17
5,04
5,91
7,65
541320*
541380*
3M 5 x 40 x 1
3M 5 x 50 x 1
2
2
6,24
7,76
Kg
* Pentair patent pending insulation
3 Meters Tinned Copper
Part
Number
ERIFLEX FLEXIBAR
Description
505501
505502
505503
3MTC 2 x 20 x 1
3MTC 3 x 20 x 1
3MTC 4 x 20 x 1
5
5
5
1,58
2,13
2,67
505506
505507
505508
505509*
505510*
3MTC 2 x 24 x 1
3MTC 3 x 24 x 1
3MTC 4 x 24 x 1
3MTC 5 x 24 x 1
3MTC 6 x 24 x 1
5
5
5
5
5
1,86
2,52
3,18
3,83
4,48
505514
505515
505516*
505517*
505518*
505519*
3MTC 3 x 32 x 1
3MTC 4 x 32 x 1
3MTC 5 x 32 x 1
3MTC 6 x 32 x 1
3MTC 8 x 32 x 1
3MTC 10 x 32 x 1
2
2
2
2
2
2
3,30
4,17
5,04
5,91
7,65
9,40
505523*
505526*
3MTC 5 x 40 x 1
3MTC 10 x 40 x 1
2
2
6,24
11,67
* Pentair patent pending insulation
* Pentair patent pending insulation
www.erico.pentair.com
Part
Number
13
Kg
ERIFLEX FLEXIBAR SUMMUM - Halogen Free
ERIFLEX FLEXIBAR SUMMUM
Characteristics
• Halogen free
• Environmental awareness
• High current density
• High ambient temperature
• High flexibility
• High insulation value
&
IEC 60439.1
IEC 61439.1
ERIFLEX FLEXIBAR SUMMUM
• Conductor in electrolytic copper
- Laminates thickness 1 mm
• Insulation in silicone compound
- Working temperature: -50ºC up to 280ºC
(315ºC short time)
- Halogen free
- Low smoke
- Very high UV & ozone withstanding
- Self-extinguishing: UL® 94 VO
- Elongation: 400% minimum
On request: Silvered or Tinned
ERIFLEX FLEXIBAR SUMMUM
- Tear resistance: 20 KN/m minimum
- Thickness: 2 mm ± 0.2 mm
- Dielectric strength: 20 KV/mm
- Maximum continuous voltage:
1000 V AC/ 1500 V DC - American Bureau of Shipping (ABS®) Certificate No. 08-HS365878-1-PDA-DUP Marine & Offshore Applications
14
www.erico.pentair.com
ERIFLEX FLEXIBAR SUMMUM - Halogen Free
Some photographs in the ERIFLEX FLEXIBAR SUMMUM section may actually be using ERIFLEX FLEXIBAR
2 Meter Red Copper
Current Coefficient
ERIFLEX FLEXIBAR
Description
70
60
50
40
30
566490
566500
566510
566520
ERIFLEX FLEXIBAR SUMMUM 2 M 2 x 20 x 1
ERIFLEX FLEXIBAR SUMMUM 2 M 3 x 20 x 1
ERIFLEX FLEXIBAR SUMMUM 2 M 4 x 20 x 1
ERIFLEX FLEXIBAR SUMMUM 2 M 5 x 20 x 1
5
5
5
5
1,05
1,42
1,78
2,15
40
60
80
100
326
428
476
498
300
395
440
460
275
360
402
420
246
323
360
376
214
280
312
326
1,72
1,72
1,72
1,72
2,25
2,25
2,25
2,25
566550
566560
566570
566580
566590
ERIFLEX FLEXIBAR SUMMUM 2 M 2 x 24 x 1
ERIFLEX FLEXIBAR SUMMUM 2 M 3 x 24 x 1
ERIFLEX FLEXIBAR SUMMUM 2 M 4 x 24 x 1
ERIFLEX FLEXIBAR SUMMUM 2 M 5 x 24 x 1
ERIFLEX FLEXIBAR SUMMUM 2 M 6 x 24 x 1
5
5
5
5
5
1,24
1,68
2,12
2,55
2,99
48
72
96
120
144
450
490
550
608
670
416
453
540
563
620
380
413
465
514
566
340
370
416
460
506
295
320
360
398
438
1,72
1,72
1,72
1,72
1,72
2,25
2,25
2,25
2,25
2,25
566630
566640
566650
566660
566670
ERIFLEX FLEXIBAR SUMMUM 2 M 3 x 32 x 1
ERIFLEX FLEXIBAR SUMMUM 2 M 4 x 32 x 1
ERIFLEX FLEXIBAR SUMMUM 2 M 5 x 32 x 1
ERIFLEX FLEXIBAR SUMMUM 2 M 6 x 32 x 1
ERIFLEX FLEXIBAR SUMMUM 2 M 8 x 32 x 1
5
5
5
5
5
2,2
2,78
3,36
3,94
5,1
96
128
160
192
256
570
648
758
846
1018
525
600
702
783
943
480
548
640
715
860
430
490
573
640
770
372
425
496
555
667
1,72
1,72
1,72
1,72
1,72
2,25
2,25
2,25
2,25
2,25
566720
566730
566750
ERIFLEX FLEXIBAR SUMMUM 2 M 5 x 40 x 1
ERIFLEX FLEXIBAR SUMMUM 2 M 6 x 40 x 1
ERIFLEX FLEXIBAR SUMMUM 2 M 10 x 40 x 1
5
5
5
4,16
4,89
7,78
200
240
400
900
1018
1400
832
943
1295
760
860
1181
680
770
1055
590
667
915
1,72
1,72
1,72
2,25
2,25
2,25
566780
566800
566810
ERIFLEX FLEXIBAR SUMMUM 2 M 5 x 50 x 1
ERIFLEX FLEXIBAR SUMMUM 2 M 8 x 50 x 1
ERIFLEX FLEXIBAR SUMMUM 2 M 10 x 50 x 1
5
2
2
5,17
7,87
9,68
250
400
500
1100
1393
1650
1016
1290
1525
930
1175
1395
830
1050
1245
718
912
1080
1,72
1,72
1,72
2,25
2,25
2,25
Kg
Section
mm2
IEC® Ampacity ∆T (ºk)
Part
Number
ADMISSIBLE CURRENTS: This table indicates the temperature rise produced by chosen current in the given section. This calculation does not take into
account the heat dissipation from the switch gear.
www.erico.pentair.com
15
ERIFLEX FLEXIBAR Accessories
ERIFLEX FLEXIBAR Kits
• Application: connections
between busbar and fixed
switchgear
• Kit is comprised of ERIFLEX
FLEXIBAR preformed and punched
at the 2 extremities & end covers
• Only 1 kit for 3 configurations
• Intensity range :
from 250A to 630A
• RoHS compliant
ERIFLEX FLEXIBAR End
Cover 20, 24 & 32
&
IEC 60439.1
IEC 61439.1
End Cover 20, 24 & 32
• End Cover 20: Accessory for
ERIFLEX FLEXIBAR 20 mm, Kit 250A T,
Kit 250A TN, IBS 25, IBS 50, IBSB 50
and IBSB 70.
• End Cover 24: Accessory for ERIFLEX
FLEXIBAR 24 mm and IBSB 100
ERIFLEX FLEXIBAR Kit 250A
ERIFLEX FLEXIBAR Kit 630A
• End Cover 32: Accessory for ERIFLEX
FLEXIBAR 32 mm, Kit 630A T, Kit
630A TN, IBSBR 120, 185 and 240.
• Visual inspection of connection
(transparent cover)
• Halogen-free
• Self-extinguishing: UL®94 V-0
• RoHS compliant
• Easy-fitting after bolting
3 Phases
3 Phases
+ Neutral
3 Phases
3 Phases
+ Neutral
KIT 250A T
KIT 250A TN
KIT 630A T
KIT 630A TN
Part
No.
Description
541800
541805
Kit 250A T
Kit 250A TN
kg/lbs
1
1
0,76/1.68
0,98/2.16
Part
No.
Description
541810
541815
Kit 630A T
Kit 630A TN
16
kg/lbs
1
1
2,10/4.63
3,10/6.83
Part
No.
Description
541774
541775
541776
End Cover 20
End Cover 24
End Cover 32
kg/lbs
12
12
12
0,19/0.42
0,22/0.48
0,26/0.57
www.erico.pentair.com
ERIFLEX FLEXIBAR Accessories
ERIFLEX FLEXIBAR
Spacer Clamps
FS 40-63
UFS
• Easy to install
• Provides support
• Allows for proper cooling
FS 24
RFS
FS
ERIFLEX FLEXIBAR
Spacer Clamp
• Helps ensure correct support for
ERIFLEX FLEXIBAR, IBSB & IBSBR in
parallel, without damage to the
insulation.
• Helps ensure correct space for optimum
cooling.
• 4 ERIFLEX FLEXIBAR in parallel maximum
• UL 67
• Recommended distance between
clamps: 400 mm
UFS Kit
ERIFLEX FLEXIBAR
Support
Assembly comprised of a 2 m aluminum section and 24 retaining blocks
made of glass-reinforced halogen-free
polyamide.
• Possible to make up 3 supports,
650 mm long each for 4 ERIFLEX
FLEXIBAR
• Recommended distance between
clamps: 400 mm max.
FS 24/32
FS 40/63
FS 80/100
Part
No.
Description
Type*
H
mm
L
mm
553550
553560
FS 24
FS 32
=< 24 mm
=< 32 mm
53
53
30
38
553570
FS 40-63
40-50 & 63 mm
95
150
10
0,100
553580
FS 80-100
80/100 mm
140
200
10
0,250
Kg
25
25
0,015
0,018
* Type of ERIFLEX FLEXIBAR and IBS/IBSB/IBSBR
RFS
Reinforced ERIFLEX
FLEXIBAR Support
• Allows up to 8 ERIFLEX FLEXIBAR
in parallel.
• Easy mounting in the panel.
(25 mm pitch)
• Recommended distance between
clamps: 400 mm
Part
No.
Description
553590
UFS Kit
www.erico.pentair.com
Kg
1
2,3
Part
No.
553370
553380
ERIFLEX
A B
C D
Description mm
mm mm mm FLEXIBAR H
mm
RFS 40-63
RFS 80-100
150
200
17
175
225
90
140
120
170
40=>63
80=>100
Kg
1
1
0,240
0,300
ERIFLEX FLEXIBAR Accessories
Connecting Clamps
BC
• Allows excellent electrical contact
• Very compact: space saving
• Quick installation
• Ideal for “on site” modifications
HCBC
FC
FC
ERIFLEX FLEXIBAR Clamp
HCBC
High Current
Busbar Clamp
• Clamping capacity: 20 mm
• 2 zinc plated steel plates complete
with M8 screws 8.8 class
Part
No.
Description
553020
553030
553040
553050
553060
553070
568700
568730
FC 50 x 24
FC 50 x 32
FC 50 x 40
FC 80 x 24
FC 80 x 32
FC 80 x 50
FC 100 x 32
FC 120 x 32
A
B
C
D
E
F
mm mm mm mm mm mm
50
50
50
80
80
80
100
120
20-24
32
40
20-24
32
50
32
32
60
60
60
90
90
90
110
130
36
44
52
36
44
62
44
44
75
75
75
105
105
105
125
125
Torque
N.m
52
60
68
52
60
78
60
60
Kg
10
10
10
10
10
10
10
10
3
3
3
3
3
3
3
3
0,319
0,362
0,412
0,432
0,492
0,642
0,670
0,760
• Clamping capacity: 40 mm
• This modular busbar clamp is designed with
non-magnetic materials for high
current connections between ERIFLEX
FLEXIBAR and rigid busbars such as
transformer terminals
• Its mechanical design assures rigidity
and even contact pressure
• Use 2 clamps to guarantee the contact
pressure
BC
Ribbed-Steel
Busbar Clamp
•
•
•
•
Clamping capacity: 20 mm
2 ribbed zinc-plated hardened-steel plates complete with screws
Maximum clamping capacity is 50 mm using longer screws 8.8 class
UL® 67 recognized
Part
No.
Description
553200
553210
553220
553230
553250
553260
BC 30
BC 40
BC 50
BC 63
BC 80
BC 100
A
B
C
Ø
mm mm mm mm
56
66
83
93
118
144
42
52
64
74
96
118
30
40
50
63
80
100
M6
M6
M8
M8
M10
M10
Torque
N.m
7
7
20
20
40
40
Kg
8
8
8
4
4
4
Part
No.
A
Description mm
B Torque
mm N.m
Kg
553100
553110
HSBC 80
HSBC 100
80
100
140
160
100
100
1
1
0,84
0,92
553120
HSBC 120
120
180
100
1
1,00
0,31
0,37
0,59
0,74
0,118
1,72
18
www.erico.pentair.com
ERIFLEX FLEXIBAR Accessories
FBC
Connectors for Connecting without Drilling
• Very compact connector for connecting without drilling to a 5 mm or
10 mm thick busbar
• Cables from 1 mm2 up to 185 mm2 or ERIFLEX FLEXIBAR width 6 mm to
20 mm
• Self-support of connector during mounting procedure
• IEC 60 999
ERIFLEX FLEXIBAR Type
Connectors for busbar thickness 5 mm
Part
No.
Description
A
mm
B
mm
C
mm
ERIFLEX
FLEXIBAR
Type (mm)
Torque
N.m
Cable
Size
mm2
553405
553400
553410
553510
553520
FBC 5 x 4
FBC 5 x 6
FBC 5 x 9
FBC 5 x 15,5
FBC 5 x 20
23
28
36
44
48
29
31
40
40
40
11
14
19
25
31
6
9
15,5
20
2
3
6-8
10-12
12-15
1-4
2,5 - 16
16 - 50
35 - 70
70 - 185
Kg
15
15
15
15
15
0,016
0,028
0,068
0,110
0,132
Connectors for busbar thickness 10 mm
Part
No.
Description
A
mm
B
mm
C
mm
ERIFLEX
FLEXIBAR
Type (mm)
Torque
N.m
Cable
Size
mm2
553505
553430
553440
553530
553540
FBC 10 x 4
FBC 10 x 6
FBC 10 x 9
FBC 10 x 15,5
FBC 10 x 20
28
33
42
49
54
29
31
40
40
40
12
14
19
25
31
6
9
15,5
20
2
3
6-8
10 - 12
12 - 15
1-4
2,5 - 16
16 - 50
35 - 70
70 - 185
Kg
15
15
15
15
15
0,018
0,030
0,070
0,112
0,138
QCC
Clamps ERIFLEX FLEXIBAR
• For ERIFLEX FLEXIBAR thickness
< 5 mm = 1 clamp
• For ERIFLEX FLEXIBAR thickness
> 5 mm = 2 clamps
Part
No.
Description
561200
561210
561220
QCC 6/13
QCC 15,5/32
QCC 40/63
ERIFLEX FLEXIBAR width
min. mm
max. mm
6
15,5
40
13
32
63
L
mm
F
mm
48
70
95
25
50
75
Kg
5
5
5
Cont Kit
Metal Nuts and Bolts
www.erico.pentair.com
0,068
0,112
0,158
Part
No.
Description
Dimensions
Torque
N.m
Contact Kit
558310
558340
Cont Kit M6 x 16
Cont Kit M8 x 30
HM 6 x 16
HM 8 x 30
13
30
100
100
0,012
0,028
• For good electrical contact
• 100 nuts - 100 bolts - 200 flat
washers
• 200 contact washers
(class 8/8 ZN8C protection)
558370
Cont Kit M10 x 30
HM 10 x 30
60
100
0,052
558410
Cont Kit M10 x 50
HM 10 x 50
60
100
0,062
558440
Cont Kit M12 x 30
HM 12 x 30
110
100
0,081
558460
Cont Kit M12 x 40
HM 12 x 40
110
100
0,091
558480
Cont Kit M12 x 50
HM 12 x 50
110
100
0,097
558880
Cont Kit M12 x 60
HM 12 x 60
110
100
0,116
558490
Cont Kit M12 x 80
HM 12 x 80
110
100
0,150
19
Kg
ERIFLEX FLEXIBAR and Busbar Hydraulic Work Center
To discover our full range of tools,
please request a copy of our specific
“Hydraulic & Manual Tools” brochure,
or download it from this QR code.
Hydraulic Busbar & ERIFLEX
FLEXIBAR Puncher
Hydraulic Busbar Bender
Hydraulic Pump & Foot
Controller
Hydraulic Busbar Cutter
Hydraulic ERIFLEX FLEXIBAR
Shearing Tool
20
Shearing Tool Ruler
Shearing Tool Guide
www.erico.pentair.com
ERIFLEX FLEXIBAR Manual Work Center
Shearing Tool
Bending Tool
Twisting Tool
ERICO FLEXIDRILL
Folding Tool
Stripping Tool
Stripping Knife
Bending Tool
www.erico.pentair.com
21
Insulated Braided Conductor (IBSB & IBSBR)
Insulated Braided Conductor
Technical Characteristics
• IBSB and IBSBR are specially designed and
developed to be suitable and connectable for
molded case circuit breaker ranges, including
most compact breakers on the market
• IBSB and IBSBR are formed with high-quality
electrolytic copper wire (diameter 0,15 mm for
maximum flexibility)
• Material savings: Integral palm without lugs
or terminals
NEW
• Quick and easy to install: Ready to use. No
cutting, stripping, crimping or punching.
Less labor time for installation
• Weight savings: A flat braid weighs less than a
cable (with insulation) and lugs.
Offers better copper usage (Skin Effect)
Insulated braided conductors suitable for
all the main molded case circuit breakers
worldwide.
• The insulation is a high-resistance selfextinguishing PVC – 105°C working
temperature maximum
• Full application range: 80 A to 630 A
(section 25, 50, 70, 100, 120, 185 and
240 mm2), with 230 up to 1030 mm length
• Reliability – No extra contact due to the lugs
being crimped at the extremities of the cables.
Integral palm without tin addition or crimped
lug for an excellent electrical contact.
• Resistant to vibration - ideal alternative to cable
Ideal connection for molded case circuit breakers
The IBSB and IBSBR range can be used as an alternative
to cable for all low-voltage applications. It is suitable
and connectable for molded case circuit breaker ranges,
including most compact breakers on the market. From
80 A up to 630 A circuit breakers, you can directly
connect the IBSB/IBSBR on the front access terminals
breaker without additional accessories, such as angular
connectors, spreaders, ring terminal connectors
or extenders. No lugs and no cutting, stripping, or
crimping are necessary.
No spreader,
no extender
needed
Very simple! Very quick! Ready to use!
No lug
needed
Direct connection
22
www.erico.pentair.com
Insulated Braided Conductor (IBSB & IBSBR)
The optimised alternative to cable - Ready to use.
Pentair has developed a unique, state-of-the-art
manufacturing line to massivate directly the palms of
IBSB and IBSBR braids.
The innovative manufacturing process provides an
effective electrical contact, due to the integral palms,
without the addition of tin or crimped lugs. This
process welds the flexible braid and brings back a
solid tinned or red copper block as a palm. Unlike
the traditional press-welded palms process, Pentair’s
process is suitable for red copper, but also for tinned
plated copper. The electrical contact between each
wire is optimized.
www.erico.pentair.com
This Pentair process also helps eliminate moisture
issues in the palms. By using crimped lugs in a severe
environment, moisture can enter in the lug (often by
capillarity) and create corrosion between each wire.
After several years, the electrical contact between
each wire can deteriorate and alter the electrical
conductivity of the equipment. The corrosion in the
palm is impossible to remove without changing the
element.
This process produces RoHS products; no additional
substances are added to the tinned-plated wires
during the manufacturing process.
23
Insulated Braided Conductor (IBSB & IBSBR)
Comparison of tensile strength
Solidified
Palms
Traditional
Braid
Displacement
Nominal clamping force
Technical data
• E xcellent electrical contact with integral palm construction
• Good tensile strength
Insulation
Braid
Certification & Approvals
• High resistance: vinyl compound
• Tinned (IBSB 25-50-70-100) or red
(IBSBR 120-185-240) electrolytic
copper
• IEC 60439.1 & IEC 61439.1
• Wire diameter: 0.15 mm for
maximum flexibility - According to
EN 13602
• RU per UL758 (E316390)
•M
aximum working temperature:
105º C
• Self-extinguishable: UL 94 V0
• Dielectric strength: 20 kV/mm
•M
ax. working voltage:
1000 V AC-1500 V DC-IEC & UL 758
• Max. working voltage:
600V AC/DC – UL 67
• Class II Conductors (IEC 61439-1,
Chapter 8.4.4 Protection by total
insulation)
A1
• c RUus per UL67 & CAN/CSA C22.2
No. 29 (File E125470)
• CE conformity
• RoHS compliance
• Very good resistance to vibration
L
+5
0
• American Bureau of Shipping
(ABS®) - Certificate No.
13-HS1070074-PDA - Marine &
Offshore Applications
A2
K1
J
J
1
2
24
K2
M
www.erico.pentair.com
Insulated Braided Conductor (IBSB & IBSBR)
Use with
circuit breaker
Part
Number
Description
L
Ø1 Ø2 A1 A2
J
S
mm2 mm mm mm mm mm mm
M
mm
K1 mm
K2 mm
Kg
IBSB - Tinned Copper
IBSB 25
125/160A
IBSB 50
250A
IBSB 70
300A
IBSB 100
350A
IBSBR 240
IBSBR 185
IBSBR 120
IBSBR - Red Copper
400A
500A
630A
www.erico.pentair.com
558500
IBSB 25-230-6
25
230
6,5
6,5
7,5
7,5
12
2,8
9
18
10
0,08
558501
IBSB 25-330-6
25
330
6,5
6,5
7,5
7,5
12
2,8
9
18
10
0,11
558502
IBSB 25-430-6
25
430
6,5
6,5
7,5
7,5
12
2,8
9
18
10
0,15
558503
IBSB 25-530-6
25
530
6,5
6,5
7,5
7,5
12
2,8
9
18
10
0,18
558504
IBSB 25-630-6
25
630
6,5
6,5
7,5
7,5
12
2,8
9
18
10
0,22
558505
IBSB 25-830-6
25
830
6,5
6,5
7,5
7,5
12
2,8
9
18
10
0,28
558506
IBSB 25-1030-6
25
1030
6,5
6,5
7,5
7,5
12
2,8
9
18
10
0,35
558507
IBSB 50-230-8-10
50
230
8,5
10,5
9
11
20
3
9
27
10
0,15
558508
IBSB 50-330-8-10
50
330
8,5
10,5
9
11
20
3
9
27
10
0,21
558509
IBSB 50-430-8-10
50
430
8,5
10,5
9
11
20
3
9
27
10
0,27
558510
IBSB 50-530-8-10
50
530
8,5
10,5
9
11
20
3
9
27
10
0,33
0,39
558511
IBSB 50-630-8-10
50
630
8,5
10,5
9
11
20
3
9
27
10
558512
IBSB 50-830-8-10
50
830
8,5
10,5
9
11
20
3
9
27
10
0,52
558513
IBSB 50-1030-8-10
50
1030
8,5
10,5
9
11
20
3
9
27
10
0,64
558514
IBSB 70-230-8-10
70
230
8,5
10,5
9
11
20
4,3
11
27
10
0,197
558515
IBSB 70-330-8-10
70
330
8,5
10,5
9
11
20
4,3
11
27
10
0,28
558516
IBSB 70-430-8-10
70
430
8,5
10,5
9
11
20
4,3
11
27
10
0,362
558517
IBSB 70-530-8-10
70
530
8,5
10,5
9
11
20
4,3
11
27
10
0,444
558518
IBSB 70-630-8-10
70
630
8,5
10,5
9
11
20
4,3
11
27
10
0,527
558519
IBSB 70-830-8-10
70
830
8,5
10,5
9
11
20
4,3
11
27
10
0,692
558520
IBSB 70-1030-8-10
70
1030
8,5
10,5
9
11
20
4,3
11
27
10
0,857
558521
IBSB 100-230-8-10
100
230
8,5
10,5
9
11
24
5
13
31
10
0,27
558522
IBSB 100-330-8-10
100
330
8,5
10,5
9
11
24
5
13
31
10
0,39
558523
IBSB 100-430-8-10
100
430
8,5
10,5
9
11
24
5
13
31
10
0,50
558524
IBSB 100-530-8-10
100
530
8,5
10,5
9
11
24
5
13
31
10
0,62
0,73
558525
IBSB 100-630-8-10
100
630
8,5
10,5
9
11
24
5
13
31
10
558526
IBSB 100-830-8-10
100
830
8,5
10,5
9
11
24
5
13
31
10
0,96
558527
IBSB 100-1030-8-10
100
1030
8,5
10,5
9
11
24
5
13
31
10
1,19
558528
IBSBR 120-230-10
120
230
10,5
10,5
11
11
32
4,4
12
39
2
0,33
558529
IBSBR 120-330-10
120
330
10,5
10,5
11
11
32
4,4
12
39
2
0,47
558530
IBSBR 120-430-10
120
430
10,5
10,5
11
11
32
4,4
12
39
2
0,6
558531
IBSBR 120-530-10
120
530
10,5
10,5
11
11
32
4,4
12
39
2
0,74
0,88
558532
IBSBR 120-630-10
120
630
10,5
10,5
11
11
32
4,4
12
39
2
558533
IBSBR 120-830-10
120
830
10,5
10,5
11
11
32
4,4
12
39
2
1,15
558534
IBSBR 120-1030-10
120
1030
10,5
10,5
11
11
32
4,4
12
39
2
1,43
558535
IBSBR 185-330-10-12
185
330
10,5
12,5
12
14
32
7,1
16
39
2
0,7
558536
IBSBR 185-430-10-12
185
430
10,5
12,5
12
14
32
7,1
16
39
2
0,9
558537
IBSBR 185-530-10-12
185
530
10,5
12,5
12
14
32
7,1
16
39
2
1,1
558538
IBSBR 185-630-10-12
185
630
10,5
12,5
12
14
32
7,1
16
39
2
1,3
558539
IBSBR 185-830-10-12
185
830
10,5
12,5
12
14
32
7,1
16
39
2
1,7
558540
IBSBR 185-1030-10-12
185
1030
10,5
12,5
12
14
32
7,1
16
39
2
2,1
558541
IBSBR 240-330-10-12
240
330
10,5
12,5
12
14
32
9,2
18.5
39
2
0,89
558542
IBSBR 240-430-10-12
240
430
10,5
12,5
12
14
32
9,2
18.5
39
2
1,14
558543
IBSBR 240-530-10-12
240
530
10,5
12,5
12
14
32
9,2
18.5
39
2
1,4
558544
IBSBR 240-630-10-12
240
630
10,5
12,5
12
14
32
9,2
18.5
39
2
1,65
558545
IBSBR 240-830-10-12
240
830
10,5
12,5
12
14
32
9,2
18.5
39
2
2,16
558546
IBSBR 240-1030-10-12
240
1030
10,5
12,5
12
14
32
9,2
18.5
39
2
2,67
25
Insulated Braided Conductor (IBS)
Insulated Braided Conductor
Technical Characteristics
IBS 25
IBS 50
• The ideal alternative to cable
IBS 120
IBS 185
IBS 240
• No cutting, no stripping, no crimping
• More flexible connection
• Pre-punched: ready to use
• Quick and easy to install
Technical Data
• Excellent electrical contact
• Intensity = 100A up to 1000A
• Excellent electrical contact
• Good tensile strength
• Tinned electrolytic copper for better corrosion
protection
• Very good resistance to vibration
Insulation
• Volume reduction inside the panel board
• High resistance : vinyl compound
• Max. working temperature : 105°C
• Self-extinguishable: UL® 94 VO
• Dielectric strength: 20 kV/mm
• Max. working voltage:
1000 V AC-1500 V DC-IEC & UL 758
• Max. working voltage:
600V AC/DC – UL 67
Braid
• Tinned electrolytic copper for
better corrosion protection
• Wire diameter: 0.15 mm for maximum flexibility
• Very good resistance to
vibration
Certification & Approval
• IEC 60439.1 & IEC 61439.1
• cRUus per UL67 &
CAN/CSA C22.2 No. 29
• CE conformity
• RoHS compliance
• RU per UL758
• American Bureau of Shipping (ABS®)
Dielectric Test
• 3500 VAC, 1 minute according
to the IEC 60439.1 standard
(rated insulation voltage
Ui 1000 VAC)
• 6000 VAC, 1 minute with 6 mA
creepage current set up
26
www.erico.pentair.com
Insulated Braided Conductor (IBS)
A1
IBS 25
IBS 50
L
+5
0
A2
J
J
1
160 A
K1
2
M
Part
No.
IBS 25
S
mm2
L
mm
Ø1
mm
Ø2
mm
A1
mm
A2
mm
J
mm
M
mm
K1
mm
K2
mm
558240
558241
558242
558243
558244
558249
558250
IBS 25-230-8-10
IBS 25-330-8-10
IBS 25-430-8-10
IBS 25-530-8-10
IBSA25-630-8-10
IBS
A1 25-830-8-10
IBS 25-1030-8-10
25
25
25
25
25L+50
+5
25
L0
25
230
330
430
530
630
830
1030
8,5
8,5
8,5
8,5
8,5
8,5
8,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10
10
10
10
10
10
K1
10
12
12
12
12
12
K
12
12
20
20
20
20
20
20
20
1,9
1,9
1,9
1,9
1,9
1,9
1,9
6
6
6
6
6
6
6
25
25
25
25
25
25
25
A2
J
mm
M
mm
K1
mm
K2
mm
12
12
12
12
12
12
12
20
20
20
20
20
20
20
3,8
3,8
3,8
3,8
3,8
3,8
3,8
7,5
7,5
7,5
7,5
7,5
7,5
7,5
25
25
25
25
25
25
25
A2
J
Part
No.
250 A
K2
J
IBS 120
IBS 185
IBS 240
10
10
10
10
10
10
10
0,095
0,14
0,17
0,21
0,25
0,33
0,41
J
IBS 50
1
558260
558261
558262
558263
558264
558255
558256
Kg
IBS 50-230-10
IBS 50-330-10
IBS 50-430-10
IBS 50-530-10
IBS 50-630-10
IBS 50-830-10
IBS 50-1030-10
A
S
mm2
50
50
50
50
50
50
50
L
mm
230
330
430
530
630
830
1030
Ø1
mm
10,5
10,5
10,5
10,5
10,5
10,5
10,5
2
Ø2
mm
J
A1
mm
K2
Mmm
Kg
M
10,5
10,5
10,5
10,5
10,5
10,5
10,5
12
12
12
12
12
12
12
10
10
10
10
10
10
10
0,16
0,22
0,29
0,35
0,41
0,53
0,65
+5
L0
K
J
J
630 A
500 A
400 A
M
Part
No.
IBS 120
S
mm2
L
mm
Ø
mm
A
mm
J
mm
M
mm
K
mm
558270
558271
558272
558273
558274
558276
IBS 120-330-10
IBS 120-430-10
IBS 120-530-10
IBS 120-630-10
IBS 120-830-10
IBS 120-1030-10
120
120
120
120
120
120
330
430
530
630
830
1030
10,5
10,5
10,5
10,5
10,5
10,5
12
12
12
12
12
12
24
24
24
24
24
24
10
10
10
10
10
10
27
27
27
27
27
27
Part
No.
IBS 185
S
mm2
L
mm
Ø
mm
A
mm
J
mm
M
mm
K
mm
558290
558291
558292
558293
558294
558295
IBS 185-330-10
IBS 185-430-10
IBS 185-530-10
IBS 185-630-10
IBS 185-830-10
IBS 185-1030-10
185
185
185
185
185
185
330
430
530
630
830
1030
10,5
10,5
10,5
10,5
10,5
10,5
12
12
12
12
12
12
24
24
24
24
24
24
15
15
15
15
15
15
31
31
31
31
31
31
Part
No.
IBS 240
S
mm2
L
mm
Ø
mm
A
mm
J
mm
M
mm
K
mm
558280
558281
558282
558283
558284
558285
IBS 240-330-12
IBS 240-430-12
IBS 240-530-12
IBS 240-630-12
IBS 240-830-12
IBS 240-1030-12
240
240
240
240
240
240
330
430
530
630
830
1030
12,5
12,5
12,5
12,5
12,5
12,5
13
13
13
13
13
13
32
32
32
32
32
32
15
15
15
15
15
15
36
36
36
36
36
36
www.erico.pentair.com
27
Kg
2
2
2
2
2
2
0,51
0,67
0,82
0,98
1,29
1,6
Kg
2
2
2
2
2
2
0,82
1,07
1,26
1,48
1,9
2,3
Kg
2
2
2
2
2
2
1,03
1,34
1,65
1,96
2,58
3,2
Insulated Braided Conductor (IBS, IBSB & IBSBR)
Insulated Braided
conductor type
Section
mm2
IBS 25
IBSB 25
IBS 50
IBSB 50
IBSB 70
IBSB 100
IBS 120
IBSBR 120
IBS 185
IBSBR 185
IBS 240
IBSBR 240
25
25
50
50
70
100
120
120
185
185
240
240
∆T (K)
Current Coefficient
30
40
45
50
55
60
70
137
116
213
213
226
298
325
363
407
416
488
556
158
134
246
246
261
344
376
419
470
480
563
642
167
142
260
260
277
365
398
444
499
509
598
681
177
150
274
274
291
385
420
468
526
537
630
718
185
157
288
288
306
404
441
491
552
563
661
753
193
164
301
301
319
422
460
513
576
588
690
786
209
177
325
325
345
456
497
554
622
635
745
849
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
2
2
2
2
2
2
2
2
2
ADMISSIBLE CURRENTS: This table indicates the temperature rise produced by chosen current in the given section.
This calculation does not take into account the heat dissipation from the switch gear.
Temperature rise of conductor = T2 - T1 = ∆T (K)
Selection of insulated braided
conductor IBS, IBSB & IBSBR
according to the internal
temperature of the panel.
Ex.: For a current of 630A, with:
T1 = 40ºC - T2 = 90ºC
1) ∆T = 90 - 40 = 50K
2) In the 50ºK column, find the closest current value to 630A.
K = Kelvin degree (temperature calculated, but not measurable.)
Ambient
Temperature
Internal
Temperature
of panel (T1)
Temperature of
conductors (T2)
Insulated braided conductor in parallel
When using 2 or 3 insulated braided conductors in parallel for the same phase,
use the current coefficient:
Ex.: IBSB 100 - ΔTº = 50K: 385 A
2 braids in parallel > 385 A x 1,6 = 616 A
3 braids in parallel > 385 A x 2 = 770 A
28
www.erico.pentair.com
Insulated Braided Conductor (IBS, IBSB & IBSBR)
Assembly Instructions
Space between 2 or 3 insulated braided
conductors in parallel, for cooling.
A minimum air gap is required. Use FS type spacer
clamp.
Screw
“Contact” Washer
Flat Washer
IBS/IBSB/IBSBR
Flat Washer
“Contact” Washer
Copper bar
Screw
Nut
“Contact” Washer
Flat Washer
Designation
Part No.
FS 24
553550
FS 32
553560
IBS/IBSB/IBSBR
Flat Washer
“Contact” Washer
Copper bar
Nut
www.erico.pentair.com
29
For insulated braided
conductor type
IBS 25 / 50
IBSB 25 / 50 / 70 / 100
IBSBR 120 / 185 / 240
Earth/Ground Copper Braids (MBJ & BJ)
Tinned Copper Earth/Ground Braids
Technical Characteristics
With integral palm
• A complete range of earth/ground flexible
connections from 6 to 100 mm2 section and
from 100 to 500 mm length
• Good resistance to vibration and fatigue
• Reliable: No extra contact due to the lugs
crimped at the ends of the cable
• Weight savings: A flat braid weighs less than
a cable (with insulation) and lugs and offers
better copper usage (Skin Effect)
• Integral palm, without tin or crimped lugs for
superior electrical contact and tensile strength
resistance
• Quick and easy to install: Ready to use. No
cutting, stripping, crimping or punching. Less
labor time for installation
Innovative, state-of-the-art manufacturing
process.
• Material savings: No lugs or terminals
Pentair manufacturing directly massivates the palms
of the MBJ tinned-plated braids. This manufacturing
process provides an effective electrical contact, due
to the integral palms, without the addition of tin or
crimped lugs.
• Recommended by the EMC/EMI directives and
less impedance than cables
This process welds the flexible braid and brings back
a solid tinned or red copper block as a palm. Unlike
the traditional press-welded palms process, Pentair’s
process is suitable for red copper, but also for tin
plated copper. The electrical contact between each
wire is optimized.
This Pentair process also helps eliminate moisture
issues in the palms. By using crimped lugs in a severe
environment, moisture can enter in the lug (often by
capillarity) and create corrosion between each wire.
After several years, the electrical contact between
each wire can deteriorate and alter the electrical
conductivity of the equipment. The corrosion in the
palm is impossible to remove without changing the
element.
BJ
Round braids with crimped lugs
This process produces RoHS products; no additional
substances are added to the tinned-plated wires
during the manufacturing process.
Part
No.
556900
556910
556920
30
L Ø D Intensity
Description Section
mm
mm mm
A
BJ 6-150 S
BJ 6-200 S
BJ 10-300 S
6
6
10
150
200
300
6,5
6,5
6,5
45
45
75
Kg
10
10
10
0,010
0,015
0,033
www.erico.pentair.com
Earth/Ground Copper Braids (MBJ & BJ)
Part
Number
Description
Intensity
A
Thickness
mm
Section
mm2
L
Ø
J
T
mm mm mm mm
MBJ 6-150-6
Kg
556600
MBJ 6-150-6
40
1,1
6
150
6,5
11
18
10
0,01
563410
MBJ 6-200-6
40
1,1
6
200
6,5
11
18
10
0,0167
556930
MBJ 10-200-6
75
1,1
10
200
6,5
11
18
10
0,022
556610
MBJ 10-300-6
75
1,1
10
300
6,5
11
18
10
0,033
0,018
563540
MBJ 16-100-6
120
1,5
16
100
6,5
15
20
10
556620
MBJ 16-100-8
120
1,5
16
100
8,5
15
20
10
0,018
563550
MBJ 16-150-6
120
1,5
16
150
6,5
15
20
10
0,035
0,035
556630
MBJ 16-150-8
120
1,5
16
150
8,5
15
20
10
563300
MBJ 16-200-6
120
1,5
16
200
6,5
15
20
10
0,033
556640
MBJ 16-200-8
120
1,5
16
200
8,5
15
20
10
0,033
556650
MBJ 16-250-8
120
1,5
16
250
8,5
15
20
10
0,04
563320
MBJ 16-300-6
120
1,5
16
300
6,5
15
20
10
0,05
556660
MBJ 16-300-8
120
1,5
16
300
8,5
15
20
10
0,05
556940
MBJ 16-500-8
120
1,5
16
500
8,5
15
20
10
0,082
556670
MBJ 25-100-10
150
1,5
25
100
10,5
22
28
10
0,027
556680
MBJ 25-150-10
150
1,5
25
150
10,5
22
28
10
0,039
563340
MBJ 25-200-6
150
1,5
25
200
6,5
22
28
10
0,052
556690
MBJ 25-200-10
150
1,5
25
200
10,5
22
28
10
0,052
563430
MBJ 25-200-12
150
1,5
25
200
12,5
22
28
10
0,052
556700
MBJ 25-250-10
150
1,5
25
250
10,5
22
28
10
0,064
556710
MBJ 25-300-10
150
1,5
25
300
10,5
22
28
10
0,077
556950
MBJ 25-500-10
150
1,5
25
500
10,5
22
28
10
0,13
556720
MBJ 30-100-10
180
2
30
100
10,5
22
28
10
0,032
556730
MBJ 30-150-10
180
2
30
150
10,5
22
28
10
0,047
556740
MBJ 30-200-10
180
2
30
200
10,5
22
28
10
0,062
556750
MBJ 30-250-10
180
2
30
250
10,5
22
28
10
0,075
556760
MBJ 30-300-10
180
2
30
300
10,5
22
28
10
0,092
556960
MBJ 30-500-10
180
2
30
500
10,5
22
28
10
0,155
556770
MBJ 35-100-10
197
2,1
35
100
10,5
22
28
10
0,037
556780
MBJ 35-150-10
197
2,1
35
150
10,5
22
28
10
0,054
556790
MBJ 35-200-10
197
2,1
35
200
10,5
22
28
10
0,072
556800
MBJ 35-250-10
197
2,1
35
250
10,5
22
28
10
0,089
Section Length Ø Holes
mm2
mm
mm
L
J
+5
0
+1
0
T±4
Technical Data
• Recommended by EMC/EMI
directives
• Flat tinned copper braids
• Electrolytic copper Cu-ETP
according to standard EN13602
• Copper purity of minimum 99,9%
• Maximum resistivity of
0,017241 mm2/m at 20ºC
• Standard wire diameter; 0,15 mm
• Bends very close to the contact
area
• Working temperature up to 105ºC
565000
MBJ 35-250-25
197
1,5
35
250
25,5
40
45
10
0,089
556810
MBJ 35-300-10
197
2,1
35
300
10,5
22
28
10
0,11
556970
MBJ 35-500-10
197
2,1
35
500
10,5
22
28
10
0,18
556820
MBJ 50-100-10
250
2,5
50
100
10,5
28
33
10
0,052
• UL® Listed (UL467) except BJ
556830
MBJ 50-150-10
250
2,5
50
150
10,5
28
33
10
0,077
563350
MBJ 50-200-6
250
2,5
50
200
6,5
28
33
10
0,12
• GOST certificates
556840
MBJ 50-200-10
250
2,5
50
200
10,5
28
33
10
0,12
• RoHS 2002/95/EC Compliant
563440
MBJ 50-200-12
250
2,5
50
200
12,5
28
33
10
0,12
• IEC 60439.1 & 61439.1
563360
MBJ 50-200-16
250
2,5
50
200
16,5
28
33
10
0,11
563370
MBJ 50-200-18
250
2,5
50
200
18,5
28
33
10
0,11
556850
MBJ 50-250-10
250
2,5
50
250
10,5
28
33
10
0,127
563380
MBJ 50-300-6
250
2,5
50
300
6,5
28
33
10
0,15
556860
MBJ 50-300-10
250
2,5
50
300
10,5
28
33
10
0,153
563390
MBJ 50-300-16
250
2,5
50
300
16,5
28
33
10
0,15
563400
MBJ 50-300-18
250
2,5
50
300
18,5
28
33
10
0,14
556980
MBJ 50-500-10
250
2,5
50
500
10,5
28
33
10
0,255
563560
MBJ 50-500-12
250
2,5
50
500
12,5
28
33
10
0,255
563450
MBJ 70-300-6
290
3,4
70
300
6,5
28
33
10
0,21
563460
MBJ 70-300-10
290
3,4
70
300
10,5
28
33
10
0,21
563420
MBJ 70-300-12
290
3,4
70
300
12,5
28
33
10
0,21
563470
MBJ 70-300-16
290
3,4
70
300
16,5
28
33
10
0,2
563480
MBJ 70-300-22
290
2,8
70
300
22,5
40
45
10
0,2
563490
MBJ 70-500-10
290
3,4
70
500
10,5
28
33
10
0,34
563500
MBJ 100-250-16
349
4
100
250
16,5
50
55
10
0,254
563510
MBJ 100-250-30
349
4
100
250
30,5
50
55
10
0,254
563520
MBJ 100-500-16
349
4
100
500
16,5
50
55
10
0,508
563530
MBJ 100-500-30
349
4
100
500
30,5
50
55
10
0,508
www.erico.pentair.com
31
Certification & Approvals
Comparison of tensile strength
Solidified
Palms
Traditional
Braid
Displacement
Nominal clamping force
Earth/Ground Stainless Steel Braids (CPI)
Stainless Steel Braids
Technical Characteristics
• 316L stainless steel braid ready to use
• Full application range: 16 to 70 mm2 section
with 150 to 1100 mm length
• High-quality 316L stainless steel: superior
abrasion, corrosion, chemical, and UV
resistance for outdoor applications
• Good resistance to vibration and fatigue
• Time savings: Quick and easy to install. Ready
to use. No additional cutting, stripping,
crimping and punching needed. Less labor time
for installation
• Material savings: No additional lugs or
terminals needed
• Durable in outdoor, salt and corrosive
environments
• Non-magnetic material
Ready-to-use stainless steel braids for
multiple applications
• Long maintenance cycle
Pentair developed and manufactures a range of earth/ground stainless steel braids. These high-quality 316L stainless steel
braids can be installed in extremely corrosive environments, like offshore applications or coastal applications. The CPI
braid is ideal for applications using stainless steel pipe or tanks, like the food and beverage industry, building industry,
transportation, oil and chemical industry.
Pentair offers 316L stainless steel, one of the highest resistant stainless steel options on the market. Pentair has mastered
the process of manufacturing stainless steel for braiding, crimping, cutting or punching and offers a full range of ready-touse stainless steel braids.
Where stainless braids can be used:
Outdoor application: Oil & chemical industry,
Salt Environment
up to 100 km
Offshore application: Salt and corrosive environments
food & beverage industry, civil construction,
urban projects and transportation
Coastal Industry
32
www.erico.pentair.com
Earth/Ground Stainless Steel Braids (CPI)
• Superior abrasion, corrosion, chemical
and UV resistance make it ideal for
outdoor applications
• Great for expansion joints where
constant movement requires a flexible
and indestructable covering
• Won’t rust or discolor, so the
appearance will never fade or change
• No additional cutting, stripping, or
crimping needed
• More flexible connection
• Pre-punched: ready to use
• Quick and easy to install
• Excellent electrical contact
T
• Very good resistance to vibration
and fatigue
e
J
• Recommended by the EMC directives
A
• Reduced maintenance
Part
Number
Technical Data
• Excellent electrical contact
• Good tensile strength
• Working temperature up to 105ºC
L
Description
Section
mm2
L
Ø
J
A
T
e
mm mm mm mm mm mm
Kg
554277
CPI 16-150-8
16
150
8,5
17,5
10
20
3
10
0,031
554278
CPI 16-200-8
16
200
8,5
17,5
10
20
3
10
0,037
554279
CPI 16-250-8
16
250
8,5
17,5
10
20
3
10
0,043
554280
CPI 16-300-8
16
300
8,5
17,5
10
20
3
10
0,050
554282
CPI 16-400-8
16
400
8,5
17,5
10
20
3
10
0,062
554286
CPI 16-600-8
16
600
8,5
17,5
10
20
3
10
0,087
554299
CPI 25-150-10
25
150
10,5
26,5
15
30
3,5
10
0,058
554300
CPI 25-200-10
25
200
10,5
26,5
15
30
3,5
10
0,068
554301
CPI 25-250-10
25
250
10,5
26,5
15
30
3,5
10
0,078
554302
CPI 25-300-10
25
300
10,5
26,5
15
30
3,5
10
0,088
554304
CPI 25-400-10
25
400
10,5
26,5
15
30
3,5
10
0,108
554308
CPI 25-600-10
25
600
10,5
26,5
15
30
3,5
10
0,147
Braid
554321
CPI 35-150-12
35
150
13
26,5
15
30
4
10
0,071
• 316L Stainless steel
554322
CPI 35-200-12
35
200
13
26,5
15
30
4
10
0,085
• Wire diameter: 0,25 mm for
maximum flexibility
• Very good resistance to vibration
Certification & Approvals
• UL® Listed UL467 - grounding and
bonding equipment for US and
Canada
• RoHS Compliant
• IEC 60439.1 & 61439.1
• ABS American Bureau of Shipping
Certificate No. 13-HS1018106-1PDA-DUP
www.erico.pentair.com
554323
CPI 35-250-12
35
250
13
26,5
15
30
4
10
0,099
554324
CPI 35-300-12
35
300
13
26,5
15
30
4
10
0,112
554326
CPI 35-400-12
35
400
13
26,5
15
30
4
10
0,140
554330
CPI 35-600-12
35
600
13
26,5
15
30
4
10
0,195
554343
CPI 50-150-12
50
150
13
30
15
30
5
10
0,111
554344
CPI 50-200-12
50
200
13
30
15
30
5
10
0,130
554345
CPI 50-250-12
50
250
13
30
15
30
5
10
0,150
554346
CPI 50-300-12
50
300
13
30
15
30
5
10
0,170
554348
CPI 50-400-12
50
400
13
30
15
30
5
10
0,209
554352
CPI 50-600-12
50
600
13
30
15
30
5
10
0,288
554365
CPI 70-150-12
70
150
13
30
15
30
5,8
10
0,139
554366
CPI 70-200-12
70
200
13
30
15
30
5,8
10
0,167
554367
CPI 70-250-12
70
250
13
30
15
30
5,8
10
0,194
554368
CPI 70-300-12
70
300
13
30
15
30
5,8
10
0,222
554370
CPI 70-400-12
70
400
13
30
15
30
5,8
10
0,277
554374
CPI 70-600-12
70
600
13
30
15
30
5,8
10
0,388
554378
CPI 70-800-12
70
800
13
30
15
30
5,8
10
0,498
554384
CPI 70-1100-12
70
1100
13
30
15
30
5,8
10
0,664
33
Power Shunt (PBC, PBCR & PPS)
• High flexibility
• Reduce vibrations
• Ideal for transformer-busduct link
• Intensity: Up to 4600 A
PPS
PBC
PBCR
A1
+5
0
A2
J
PBCR
Braided Power Shunts
• Drilled palms (ready to use)
• Weight savings - integral
palm without tin addition
or crimped lug
• Red electrolytic copper
strand
Ø 0,15 mm
• Extra flexible power
connection and good
resistance to vibration
• UL® Listed to UL 467
up to 100 mm2 for
grounding and bonding
application
• UL® Recognized to UL 67
L
J
1
2
M
Intensity
(∆T 30K)
Intensity
(∆T 50K)
70
70
70
226
226
226
362
362
362
291
291
291
466
466
466
230
330
430
8,5
8,5
8,5
10,5
10,5
10,5
9
9
9
11
11
11
20
20
20
4,3
4,3
4,3
2
2
2
0,17
0,24
0,30
PBCR 100-230-8-10
PBCR 100-330-8-10
PBCR 100-430-8-10
100
100
100
298
298
298
477
477
477
385
385
385
616
616
616
230
330
430
8,5
8,5
8,5
10,5
10,5
10,5
9
9
9
11
11
11
24
24
24
5
5
5
2
2
2
0,24
0,34
0,44
564966
564967
564968
PBCR 120-230-10
PBCR 120-330-10
PBCR 120-430-10
120
120
120
363
363
363
581
581
581
468
468
468
749
749
749
230
330
430
10,5 10,5
10,5 10,5
10,5 10,5
11
11
11
11
11
11
32
32
32
4,4
4,4
4,4
2
2
2
0,29
0,41
0,53
564969
564970
PBCR 185-330-10-12
PBCR 185-430-10-12
185
185
416
416
666
666
537
537
859
859
330
430
10,5
10,5
12,5
12,5
12
12
14
14
32
32
7,1
7,1
2
2
0,64
0,82
564971
564972
PBCR 240-330-10-12
PBCR 240-430-10-12
240
240
556
556
890
890
718
718
1149
1149
330
430
10,5
10,5
12,5
12,5
12
12
14
14
32
32
9,2
9,2
2
2
0,83
1,07
Part
No.
Description
Section
mm2
564000
564050
564010
564100
564150
564200
564250
564300
564400
564500
564600
564700
564800
564900
564030
PBC 100 x 250
PBC 100 x 500
PBC 120 x 250
PBC 150 x 250
PBC 150 x 500
PBC 200 x 250
PBC 200 x 500
PBC 250 x 300
PBC 300 x 400
PBC 400 x 400
PBC 500 x 400
PBC 600 x 450
PBC 800 x 450
PBC 1000 x 450
PBC 1200 x 500
100
100
120
150
150
200
200
250
300
400
500
600
800
1000
1200
Part
No.
Description
Section
mm2
564960
564961
564962
PBCR 70-230-8-10
PBCR 70-330-8-10
PBCR 70-430-8-10
564963
564964
564965
M
L Ø1 Ø2 A1 A2
J
mm mm mm mm mm mm mm
Kg
PBC
Braided Power Shunts
• Undrilled palms to
customer’s specific designs,
fitted by power press
• Extra-flexible power
connections (expansion
rings, busbar…)
• Tinned electrolytic copper
strand Ø 0,15 mm
• When used in parallel, the
2 shunts must be spaced
with a minimum distance
equal to the thickness of
the shunt to allow air
cooling
Intensity
(∆T 30K)
349
349
385
440
440
550
550
651
716
853
917
1101
1376
1651
1982
34
600
600
670
757
757
946
946
1120
1180
1360
1561
1762
2202
2642
3170
Intensity
(∆T 50K)
462
462
511
583
583
729
729
863
948
1131
1216
1459
1823
2188
2626
795
795
877
1003
1003
1253
1253
1484
1565
1808
1944
2334
2917
3500
4208
A
mm
B
mm
C
mm
L
mm
35
35
35
55
55
55
55
85
85
85
105
105
105
105
125
40
40
40
50
50
50
50
50
60
80
100
100
100
100
120
7,0
7,0
7,5
8,0
8,0
9,0
9,0
10,5
11,0
11,0
11,0
13,0
14,0
16,0
17,5
250
500
250
250
500
250
500
300
400
400
400
450
450
450
500
Kg
2
2
2
2
2
2
2
2
1
1
1
1
1
1
1
0,38
0,63
0,42
0,63
0,90
0,76
1,20
1,03
1,53
2,20
2,64
3,40
4,26
5,47
7,16
www.erico.pentair.com
Power Shunt (PBC, PBCR & PPS)
PBC Application
PPS
Presswelded Power Shunts
Part
No.
Description
566000
566020
566030
566040
566050
566060
566070
PPS 40/5/50-180
PPS 40/10/50-220
PPS 50/10/80-280
PPS 80/10/100-320
PPS 100/10/100-300
PPS 100/10/110-360
PPS 100/15/110-360
Intensity
Section (∆T 30K)
mm2
200
400
500
800
1000
1000
1500
572
849
1022
1511
1825
1825
2178
984
1460
1758
2493
2920
2920
3485
Intensity
(∆T 50K)
758
1125
1354
2002
2418
2418
2886
1304
1935
2329
3303
3869
3869
4617
A
mm
B
mm
50
50
80
100
100
110
110
40
40
50
80
100
100
100
C
L
H
mm mm mm
5
10
10
10
10
10
15
Custom Solutions
Pentair can provide made-to-order, custom configurations
to your drawing specifications.
Pentair copper braids can be made to custom lengths,
widths, thicknesses and hole patterns; with PVC
installation; in flat or tubular shapes; using
copper wire; in continuous coils; or with soldered
studs or crimped lugs. Let Pentair solve your design
and production scheduling challenges.
www.erico.pentair.com
35
180
220
280
320
300
360
360
45
58
58
52
54
53
57
Kg
2
2
1
1
1
1
1
0,390
0,930
1,440
2,625
3,065
3,610
5,385
Press welding is welding of
laminations to each other
through direct current applied
to pieces under pressure.
This technique results in:
• The formation of a solid palm
with properties of plain bar
• Smaller cross section for same
capacity
• Runs cooler than equal
section
• Plain copper, thickness of
laminations 0,2 mm
• When used in parallel, the 2
shunts must be spaced with
a minimum distance equal to
the thickness of the shunt
Flat Copper & Stainless Steel Braids (FTCB, FRCB, FSSB & FTCBI)
FTCBI
FRCB 15
FTCB
FSSB 25
FTCB 15
FTCB 15
Flat tinned copper braids
FTCBI
Insulated flat tinned copper braids
•Standard wire diameter: 0,15 mm
• 25 m coils
• Insulation in clear PVC, thickness 1 mm,
self-extinguishing UL® 94 VO
• Standard wire diameter: 0,15 mm
• 25 m coils
• Insulation voltage: 450 V
• Working temperature: up to 70°C
Part
No.
Description
557200
557210
557220
557230
557240
557250
557260
557270
557280
557290
557300
557310
557320
557330
557350
FTCB 15-3
FTCB 15-5
FTCB 15-8
FTCB 15-10
FTCB 15-16
FTCB 15-20
FTCB 15-25
FTCB 15-30
FTCB 15-35
FTCB 15-40
FTCB 15-50
FTCB 15-60
FTCB 15-70
FTCB 15-75
FTCB 15-100
Number Nominal
of
Current
Wire
A
Section
mm
mm2
3
5
8
10
16
20
25
30
35
40
50
60
70
75
100
5x1
8x1
8x1,5
10x1,5
15x1,5
20x1,5
23x1,5
23x2,0
23x2,5
25x2,5
28x3
30x3
30x3,5
30x4
40x4
168
288
456
576
896
1120
1404
1692
1980
2272
2848
3392
3968
4256
5664
30
45
65
75
120
140
150
180
200
220
250
280
290
300
360
Kg
25 m
25 m
25 m
25 m
25 m
25 m
25 m
25 m
25 m
25 m
25 m
25 m
25 m
25 m
25 m
0,03
0,05
0,08
0,10
0,16
0,20
0,25
0,30
0,35
0,40
0,50
0,60
0,70
0,75
1,00
FRCB 15
Flat plain copper braids
557000
557010
557020
557030
557040
557050
557060
557070
557080
557090
557100
557110
557120
557130
557150
FRCB 15-3
FRCB 15-5
FRCB 15-8
FRCB 15-10
FRCB 15-16
FRCB 15-20
FRCB 15-25
FRCB 15-30
FRCB 15-35
FRCB 15-40
FRCB 15-50
FRCB 15-60
FRCB 15-70
FRCB 15-75
FRCB 15-100
3
5
8
10
16
20
25
30
35
40
50
60
70
75
100
5x1
8x1
8x1,5
10x1,5
15x1,5
20x1,5
23x1,5
23x2,0
23x2,5
25x2,5
28x3
30x3
30x3,5
30x4
40x4
Number Nominal
of
Current
Wire
A
168
288
456
576
896
1120
1404
1692
1980
2272
2848
3392
3968
4256
5664
Description
Section
mm
mm2
Number Nominal
of
Current
Wire
A
510300
FTCBI 16
16
17x3,5
896
510310
FTCBI 25
25
25x3,5
1404
510320
FTCBI 35
35
25x4,5
1980
510340
FTCBI 50
50
30x5
2848
Standard wire diameter 0,15 mm - Extra long reels
503600
FTCBI 15-16
16
17x3,5
896
503610
FTCBI 15-25
25
25x3,5
1404
503620
FTCBI 15-35
35
25x4,5
1980
Kg
120
150
200
250
25 m
25 m
25 m
25 m
0,18
0,29
0,40
0,60
120
150
200
100 m
100 m
75 m
0,18
0,29
0,40
FTCB 20
Flat tinned copper braids
•Standard wire diameter: 0,20 mm
• Extra long reels
•Standard wire diameter: 0,15 mm
• 25 m coils
Part
Section
mm
Description
No.
mm2
Part
No.
30
45
65
75
120
140
150
180
200
220
250
280
290
300
360
Kg
25 m
25 m
25 m
25 m
25 m
25 m
25 m
25 m
25 m
25 m
25 m
25 m
25 m
25 m
25 m
0,03
0,05
0,08
0,10
0,16
0,20
0,25
0,30
0,35
0,40
0,50
0,60
0,70
0,75
1,00
Part
No.
Description
503500
503510
503520
503530
503540
FTCB 20-3
FTCB 20-5
FTCB 20-10
FTCB 20-16
FTCB 20-25
Section
mm
mm2
3
5
10
16
25
Number Nominal
of
Current
Wire
A
5x1
8x1
10x1,5
15x2
25x1,5
96
168
312
512
792
30
45
75
120
150
Kg
500 m
500 m
150 m
150 m
100 m
0,03
0,05
0,10
0,16
0,25
FSSB 25
Stainless steel flat braids
•Standard wire diameter: 0,25 mm
• Stainless steel 316L
36
Part
No.
Description
Section
mm2
mm
557160
557170
557390
FSSB 25-162
FSSB 25-252
FSSB 25-502
16
25
50
15x1,5
23x1,5
30x3
Kg
25 m
25 m
25 m
0,14
0,22
0,44
www.erico.pentair.com
Round & Tubular Copper Braids (RTCB, RRCB & TTCE)
• A large range of braids
• Bare or insulated
• Tubulars for shielding
• Stainless steel for corrosive environment
RRCB
RTCB
RTCB / RTCB HL
Tinned copper round braids
RRCB
Plain copper round braids
•Standard wire diameter: 0,15 mm
• 25 m coils
•Standard wire diameter: 0,15 mm
• 25 m coils
Part
Section
Description
No.
mm2
External Number Nominal
dia in
of
Current
mm
Wire
A
557600
RTCB 15-6
6
4
352
557610
RTCB 15-8
8
4,5
464
557620
RTCB 15-10
10
5
560
557630
RTCB 15-16
16
6
900
557640
RTCB 15-25
25
8
1416
557650
RTCB 15-30
30
9
1680
557660
RTCB 15-50
50
11
2820
557670
RTCB 15-75
75
13,5
4236
557680 RTCB 15-100
100
17
5652
Standard wire diameter 0,15 mm - Extra long reels
503700 RTCB 15-10/HL
10
5
560
503710 RTCB 15-16/HL
16
6
900
503720 RTCB 15-25/HL
25
7,5
1416
503730 RTCB 15-30/HL
30
8
1680
Part
Section
Description
No.
mm2
Kg
45
65
75
120
150
180
250
300
360
25 m
25 m
25 m
25 m
25 m
25 m
25 m
25 m
25 m
0,06
0,08
0,10
0,16
0,25
0,30
0,50
0,75
1,00
75
120
150
180
100 m
100 m
100 m
75 m
0,100
0,160
0,250
0,300
557400
557410
557420
557430
557440
557450
557460
557470
557480
RRCB 15-6
RRCB 15-8
RRCB 15-10
RRCB 15-16
RRCB 15-25
RRCB 15-30
RRCB 15-50
RRCB 15-75
RRCB 15-100
External Number Nominal
dia in
of
Current
mm
Wire
A
6
8
10
16
25
30
50
75
100
4
4,5
5
6
8
9
11
14
18
352
464
560
900
1416
1680
2820
4236
5652
45
65
75
120
150
180
250
300
360
Kg
25 m
25 m
25 m
25 m
25 m
25 m
25 m
25 m
25 m
0,06
0,08
0,10
0,16
0,25
0,30
0,50
0,75
1,00
TTCE
Tinned copper tubular braids
•For screening connecting cables between equipment used in an electromagnetically disturbed
environment.
• Supplied with draw wire
TTCE
Part
Section
Description
No.
mm2
510100
TTCE 3
510110
TTCE 5
510120
TTCE 8
510130
TTCE 10
510140
TTCE 15
510150
TTCE 20
510160
TTCE 25
510170
TTCE 30
510180
TTCE 35
Extra long reels
504690
TTCE 8/HL
Diameter (mm)
Number
Nominal
Ø wires
of
Current
mm
Covering % Wire
A
Int.
Covering %
Exp.
1,7
2,5
4,45
5,7
12
20,4
27,1
33,9
40,7
3
5
8
10
15
20
25
30
35
100%
99%
99%
100%
100%
99%
99%
100%
100%
6
10
16
20
30
40
50
60
70
90%
92%
95%
92%
94%
87%
92%
90%
94%
96
144
252
320
334
288
384
480
576
0,15
0,15
0,15
0,15
0,20
0,30
0,30
0,30
0,30
13
19
37
43
90
122
163
185
244
50 m
50 m
50 m
50 m
50 m
50 m
25 m
25 m
25 m
6,8
8
-
16
-
216
0,20
37
200 m 0,050
www.erico.pentair.com
37
Kg
0,020
0,026
0,050
0,054
0,120
0,190
0,270
0,320
0,380
The primary use of tubular
braid is to provide sensitive
cables with an EMC/EMI
screen to shield them against
electromagnetic, electrostatic
and radio frequency interference. Optimum screening
performance is obtained using
copper wire braid that can
also be used for earth
continuity purposes.
Round Copper Braids (RRCBI & RTCBI)
RRCBI
RTCBI
RRCBI
Insulated plain copper round braids
RTCBI / RTCBI HL
Insulated round tinned copper braids
• Insulation in clear PVC, thickness 1 mm,
self-extinguishing UL® 94 VO
• Standard wire diameter: 0,15 mm
• Insulation voltage: 450 V
• Working temperature: up to 70°C
• Insulation in clear PVC, thickness 1 mm,
self-extinguishing UL 94 VO
• Standard wire diameter: 0,15 mm
• 25 m coils
• Insulation voltage: 450 V
• Working temperature: up to 70°C
Part
Section
Description
No.
mm2
510500
510510
RRCBI 15-10
RRCBI 15-16
10
16
External Number Nominal
dia in
of
Current
mm
Wire
A
7
8
560
900
75
120
Part
No.
Kg
25 m
25 m
0,10
0,16
Description
Section
mm
mm2
Number Nominal
of
Current
Wire
A
503400
RTCBI 15-10
10
7
560
503410
RTCBI 15-16
16
8
900
503420
RTCBI 15-25
25
9,5
1416
503430
RTCBI 15-30
30
10
1680
503440
RTCBI 15-50
50
12,5
2820
Standard wire diameter 0,15 mm - Extra long reels
503800 RTCBI 15-10HL
10
7
560
503810 RTCBI 15-16HL
16
8
900
503820 RTCBI 15-25HL
25
9,5
1416
503830 RTCBI 15-30HL
30
10
1680
On Request Special Manufacturing:
- Tubular braids up to 60 mm diameter maximum
- Flat or round copper braids up to 400 mm2 maximum
- Insulation 105º C
38
Kg
75
120
150
180
250
25 m
25 m
25 m
25 m
25 m
0,12
0,18
0,25
0,35
0,58
75
120
150
180
100 m
100 m
100 m
75 m
0,12
0,18
0,28
0,35
www.erico.pentair.com
Make Your Own Braided Connections
BD
PB
BD
Crimp and drill tool
PB
Lugs for flat braids
(FTCB or FCRB)
• This tool has been developed by Pentair specifically for
crimping and drilling of braid terminals. Guide and
specially adapted drill bit included.
Part
Description
No.
558610
558640
558620
558630
BD 16
BD 16-8,5
BD 25
BD 50
For
Flat
Ø
Drill Bit
Bolt
FTCB or FRCB 15-16
FTCB or FRCB 15-16
FTCB or FRCB 15-25
FTCB or FRCB 15-50
6,5
8,5
11
12,5
M6
M8
M10
M126
• In tinned annealed copper
Kg
1
1
1
1
0,653
0,653
0,678
0,712
e
B
A
HCT 3-4
Crimping tool for hydraulic work center
Part
Description
No.
• This package allows to crimp lugs PB16, PB25 and
PB50 on braids with the hydraulic ERICO Puncher.
Part
No.
Description
545980
HCT 3-4
557180
557190
557380
Kg
1
1,850
ABOUT ELECTROMAGNETIC COMPATIBILITY…
In an environment where electromagnetic disturbances
are more and more numerous, the ElectroMagnetic
Compatibility (EMC) is increasingly important in the design
and building of electrical panels.
In order to avoid stray currents, it is necessary that all the
metallic framework, inside the panel or outside, is at the
same electrical potential. Thus, it is essential to link all these
metal parts with connections presenting a low impedance
at High Frequency (H.F.).
Connections with cables are not efficient. Only short and
flat conductors are. Their H.F. impedances are 10 times
lower than the wire impedances.
www.erico.pentair.com
39
PB 16
PB 25
PB 50
For
Flat
A
B
e
FTCB or FRCB 15-16
FTCB or FRCB 15-25
FTCB or FRCB 15-50
16
22
30
15
25
30
1
1
1
Kg
100
100
100
0,004
0,010
0,017
Made to Order Solutions (MTO)
ERIFLEX FLEXIBAR Custom
Solutions (Made to Order)
Pentair can provide preformed ERIFLEX
FLEXIBAR configurations to your
drawing specifications. ERIFLEX
FLEXIBAR can be cut, punched,
twisted or bent to address your most
challenging panelboard designs and
production scheduling requirements.
Give Pentair your low voltage
connection challenges!
Braided Conductors Custom
Solutions (Made to Order)
ERICO brand of copper braids can
be made to custom lengths, widths,
thicknesses and hole patterns; with
PVC insulation; in flat or tubular
shapes; using copper or stainless
steel wire; in continuous coils; or
with soldered studs or crimped lugs.
Let Pentair solve your design and
production scheduling challenges.
40
www.erico.pentair.com
Made to Order Solutions
Custom Solutions (Made to Order) - Check List
Summary of the information we need for custom design work. Please photocopy this page and complete it by providing
the information you know and sending to your local Pentair customer service representative. (Sections can be left blank)
Material:
Red/plain copper...............................................
Tinned copper..................................................
Stainless steel...................................................
Aluminum.........................................................
Other......________________________________
Electrical Function:
Earthing/grounding conductor..........................
Power conductor..............................................
Nominal current.........................................____A
Alternating or direct current......................._____
Nominal voltage.........................................____V
Insulation specification (if required)................... ........................................................................
Environment:
Ambient temperature..............................____Cº
Operating temperature............................____Cº
Conductor maximum temperature...........____Cº
Humidity (dry/average/moist).......................%HR
Extremity/terminal dimensions: Indicate your dimensions on the proposed terminal
drawing or make a sketch showing your needs.
Conductor Dimensions:
Availability: Drawing
Specification
Samples
mm2
Cross Section ____________________________________
Flat or Round Section _____________________________
mm
Width of the Conductor ___________________________
mm
Thickness of the Conductor ________________________
mm
Length of the Conductor __________________________
Quantity ________________________________________
Contact/Requested by:
Company ___________________________________________
Contact Name _____________________________________
Phone Number _____________________________________
www.erico.pentair.com
41
E-mail address _____________________________________
Address (City & Country) _______________________________
_____________________________________________________
Cross Reference List
Part
Number
Page
50340038
50341038
50342038
50343038
50344038
50350036
50351036
50352036
50353036
50354036
50360036
50361036
50362036
50370037
50371037
50372037
50373037
50380038
50381038
50382038
50383038
50469037
50550113
50550213
50550313
50550613
50550713
50550813
50551413
50551513
51010037
51011037
51012037
51013037
51014037
51015037
51016037
51017037
51018037
51030036
51031036
51032036
51034036
51050038
51051038
53865011
54102013
54106013
54107013
54109013
54110013
54111013
54115013
54116013
54117013
54123013
54124013
54177416
54177516
Part
Number
Page
54177616
54180016
54180516
54181016
54181516
54598039
55239011
55239013
55240011
55240013
55241011
55241013
55242011
55242013
55243011
55243013
55244011
55244013
55245011
55245013
55246011
55246013
55247011
55247013
55248011
55248013
55249011
55249013
55250011
55250013
55251011
55251013
55252011
55253011
55254011
55255011
55255013
55256011
55256013
55257011
55257013
55258011
55259011
55260011
55261011
55262011
55262013
55263011
55263013
55264011
55264013
55265011
55266011
55267011
55268011
55269011
55269013
55270011
55270013
55271011
42
Part
Number
Page
55271013
55272011
55273011
55274011
55275011
55276011
55276013
55277011
55278011
55279011
55280011
55281011
55283011
55284011
55285011
55286011
55287011
55288011
55288013
55289011
55290011
55291011
55292011
55293011
55295011
55296011
55297011
55298011
55299011
55302018
55303018
55304018
55305018
55306018
55307018
55310018
55311018
55312018
55320018
55321018
55322018
55323018
55325018
55326018
55337017
55338017
55340019
55340519
55341019
55343019
55344019
55350519
55351019
55352019
55353019
55354019
55355017
55355029
55356017
55356029
www.erico.pentair.com
Cross Reference List
Part
Number
Page
55357017
55358017
55359017
55427733
55427833
55427933
55428033
55428233
55428633
55429933
55430033
55430133
55430233
55430433
55430833
55432133
55432233
55432333
55432433
55432633
55433033
55434333
55434433
55434533
55434633
55434833
55435233
55436533
55436633
55436733
55436833
55437033
55437433
55437833
55438433
55660031
55661031
55662031
55663031
55664031
55665031
55666031
55667031
55668031
55669031
55670031
55671031
55672031
55673031
55674031
55675031
55676031
55677031
55678031
55679031
55680031
55681031
55682031
55683031
55684031
www.erico.pentair.com
Part
Number
Page
55685031
55686031
55690030
55691030
55692030
55693031
55694031
55695031
55696031
55697031
55698031
55700036
55701036
55702036
55703036
55704036
55705036
55706036
55707036
55708036
55709036
55710036
55711036
55712036
55713036
55715036
55716036
55717036
55718039
55719039
55720036
55721036
55722036
55723036
55724036
55725036
55726036
55727036
55728036
55729036
55730036
55731036
55732036
55733036
55735036
55738039
55739036
55740037
55741037
55742037
55743037
55744037
55745037
55746037
55747037
55748037
55760037
55761037
55762037
55763037
43
Part
Number
Page
55764037
55765037
55766037
55767037
55768037
55824027
55824127
55824227
55824327
55824427
55824927
55825027
55825527
55825627
55826027
55826127
55826227
55826327
55826427
55827027
55827127
55827227
55827327
55827427
55827627
55828027
55828127
55828227
55828327
55828427
55828527
55829027
55829127
55829227
55829327
55829427
55829527
55831019
55834019
55837019
55841019
55844019
55846019
55848019
55849019
55850025
55850125
55850225
55850325
55850425
55850525
55850625
55850725
55850825
55850925
55851025
55851125
55851225
55851325
55851425
Cross Reference List
Part
Number
Page
55851525
55851625
55851725
55851825
55851925
55852025
55852125
55852225
55852325
55852425
55852525
55852625
55852725
55852825
55852925
55853025
55853125
55853225
55853325
55853425
55853525
55853625
55853725
55853825
55853925
55854025
55854125
55854225
55854325
55854425
55854525
55854625
55861039
55862039
55863039
55864039
55888019
56120019
56121019
56122019
56330031
56332031
56334031
56335031
56336031
56337031
56338031
56339031
56340031
56341031
56342031
56343031
56344031
56345031
56346031
56347031
56348031
56349031
56350031
Part
Number
Page
56351031
56352031
56353031
56354031
56355031
56356031
56400034
56401034
56403034
56405034
56410034
56415034
56420034
56425034
56430034
56440034
56450034
56460034
56470034
56480034
56490034
56496034
56496134
56496234
56496334
56496434
56496534
56496634
56496734
56496834
56496934
56497034
56497134
56497234
56500031
56600035
56602035
56603035
56604035
56605035
56606035
56607035
56649015
56650015
56651015
56652015
56655015
56656015
56657015
56658015
56659015
56663015
56664015
56665015
56666015
56667015
56672015
56673015
56675015
56678015
44
Part
Number
Page
56680015
56681015
56870018
56873018
505509*13
505510*13
505516*13
505517*13
505518*13
505519*13
505523*13
505526*13
538650*13
541180*13
541250*13
541260*13
541270*13
541320*13
541380*13
552520*13
552530*13
552540*13
552580*13
552590*13
552600*13
552610*13
552650*13
552660*13
552670*13
552680*13
552720*13
552730*13
552740*13
552750*13
552770*13
552780*13
552790*13
552800*13
552810*13
552830*13
552840*13
552850*13
552860*13
552870*13
552890*13
552900*13
552910*13
552920*13
552930*13
552950*13
552960*13
552970*13
552980*13
552990*13
www.erico.pentair.com
www.erico.pentair.com
AUSTRALIA
CHINA
HUNGARY
NORWAY
SWITZERLAND
Phone 1-800-263-508
Fax 1-800-423-091
Phone +86-21-3430-4878
Fax +86-21-5831-8177
Phone 06-800-16538
Fax +39-0244-386-107
Phone 800-100-73
Fax 800-100-66
Phone 0800-55-86-97
Fax 0800-55-96-15
BELGIUM
DENMARK
INDONESIA
POLAND
THAILAND
Phone 0800-757-48
Fax 0800-757-60
Phone 808-89-372
Fax 808-89-373
Phone +62-21-575-0941
Fax +62-21-575-0942
Phone +48-71-349-04-60
Fax +48-71-349-04-61
Phone +66-2-267-5776
Fax +66-2-636-6988
BRAZIL
FRANCE
ITALY
SINGAPORE
Phone +55-11-3623-4333
Fax +55-11-3621-4066
Phone 0-800-901-793
Fax 0-800-902-024
Phone 800-870-938
Fax 800-873-935
Phone +65-6-268-3433
Fax +65-6-268-1389
UNITED ARAB
EMIRATES
CANADA
GERMANY
MEXICO
SPAIN
UNITED KINGDOM
Phone +1-800-677-9089
Fax +1-800-677-8131
Phone 0-800-189-0272
Fax 0-800-189-0274
Phone +52-55-5260-5991
Fax +52-55-5260-3310
Phone 900-993-154
Fax 900-807-333
Phone 0808-2344-670
Fax 0808-2344-676
CHILE
HONG KONG
NETHERLANDS
SWEDEN
UNITED STATES
Phone +56-2-370-2908
Fax +56-2-369-5657
Phone +852-2764-8808
Fax +852-2764-4486
Phone 0800-0200-135
Fax 0800-0200-136
Phone 020-790-908
Fax 020-798-964
Phone 1-800-753-9221
Fax +1-440-248-0723
Phone +971-4-881-7250
Fax +971-4-881-7270
ABS is a registered certification mark of American Bureau of Shipping.
CSA is a registered trademark of the Canadian Standards Association.
IEC is a registered trademark of Internationale Commission Electrotechnique.
UL is a registered trademark of UL LLC.
© 2012, 2013, 2015 Pentair All Rights Reserved
Pentair, CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH and LENTON are owned by Pentair or its global affiliates. All other
trademarks are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.
P1224C-WWEN
P162LT15WWEN
3.5M0315