DLQL
TOC
1.4 –
X X DLQLtestregistrierung
Ceiling diffusers
1
Type DLQL
Horizontal
one-way air discharge
Horizontal
two-way air discharge
Horizontal
four-way air discharge
For horizontal one-way to four-way air discharge,
for comfort zones, with fixed baffle element
Square ceiling diffusers
■ Nominal sizes 250, 300, 400, 500, 600
■ Volume flow rate range 6 – 285 l/s or 22 – 1026 m³/h
■ Square diffuser face
■ Diffuser face made of galvanised sheet steel, powder-coated
■ For supply and extract air
■ For variable and constant volume flows
■ For all types of ceiling systems
Horizontal
duct connection
■ Perforated diffuser face with special baffle element
for horizontal air discharge and high induction levels
Optional equipment and accessories
■ Exposed diffuser face available in RAL CLASSIC colours
■ Horizontal or vertical duct connection
■ Blanking plates for adjusting the discharge direction
■ Plenum box with damper blade
Vertical duct connection
02/2015 – DE/en
K1 – 1.4 – 77
Ceiling diffusers
TOC
General information
DLQL
Type
1
DLQL
Variants
DLQL-Z-H
Page
General information
Order code
Quick sizing
Dimensions and weight
Installation details
Specification text
1.4 – 78
1.4 – 82
1.4 – 84
1.4 – 87
1.4 – 90
1.4 – 91
Basic information and nomenclature
1.6 – 1
DLQL-Z-V
Product examples
Installation examples
K1 – 1.4 – 78
Installation in T-bar ceilings
Installation in T-bar ceilings,
arrangement in a row
02/2015 – DE/en
Ceiling diffusers
TOC
General information
Description
For detailed information
on plenum boxes
see Chapter K1 – 1.5.
Application
– Type DLQL ceiling diffusers
are used as supply air or extract air diffusers
for comfort zones
– Perfect integration with suspended perforated
sheet metal ceilings
– Horizontal one-way to four-way supply
air discharge for mixed flow ventilation
– High induction results in a rapid reduction
of temperature differences and airflow
velocities (supply air variant)
– For variable and constant volume flows
– For supply air to room air temperature
differences from –10 to +10 K
– For room heights up to 4 m
(lower edge of suspended ceiling)
– For all types of ceiling systems
Variants
– DLQL-P: Grid ceilings
and continuous plasterboard ceilings
– DLQL-T: T-bar ceilings
– DLQL-*-Z: Supply air
– DLQL-*-A: Extract air
Connection
– H: Horizontal duct connection
– V: Vertical duct connection
Nominal sizes
Ceiling tile
– 248, 298, 398, 498, 598, 623
(intermediate sizes 249 to 622,
in increments of 1 mm)
Air terminal device
– 250, 300, 400, 500, 600
Attachments
– M: Damper blade for volume flow rate
balancing with horizontal connection
DLQL
Parts and characteristics
– Perforated square diffuser face
with special baffle element
– Simple installation of the diffuser face due
to central fixing screw with decorative cap
(variant -P)
Construction features
– Spigot suitable for circular ducts to EN 1506
or EN 13180
– Spigot with groove for lip seal
(if accessory lip seal has been ordered)
Materials and surfaces
– Perforated diffuser face made of galvanised
sheet steel
– Casing, damper blade and plenum box
made of galvanised sheet steel
– Baffle element made of acoustic fleece
– Lip seal made of rubber
– Casing powder-coated RAL 9005, jet black
– Diffuser face electrocoated RAL 9010,
pure white
– P1: Powder-coated, RAL CLASSIC colour
Installation and commissioning
– Preferably for rooms
with a clear height up to 4.0 m
– Installation in plasterboard,
grid and T-bar ceilings
– Horizontal or vertical duct connection
– If necessary, carry out volume flow rate
balancing with damper blade
Standards and guidelines
– Sound power level of the air-regenerated
noise measured according to EN ISO 5135
Maintenance
– Maintenance-free as construction
and materials are not subject to wear
– Inspection and cleaning to VDI 6022
Accessories
– Lip seal
Useful additions
– Blanking plates
Special characteristics
– Horizontal one-way to four-way
supply air discharge
– Perforated diffuser face made of galvanised
sheet steel
– For all types of ceiling systems
– Horizontal or vertical duct connection
Technical data
02/2015 – DE/en
Nominal sizes – ceiling tile
Nominal sizes – diffuser
Minimum volume flow rate
Maximum volume flow rate, with LWA ≅ 50 dB(A)
Supply air to room air temperature difference
248, 298, 398, 498, 593, 598, 618, 623 mm
250, 300, 400, 500, 600 mm
6 – 145 l/s or 22 – 522 m³/h
275 – 285 l/s or 990 – 1026 m³/h
–10 to +10 K
K1 – 1.4 – 79
1
Ceiling diffusers
TOC
General information
1
Function
DLQL
Functional description
Ceiling diffusers direct the air from air conditioning
systems into the room. The resulting airflow
induces high levels of room air, thereby rapidly
reducing the airflow velocity and the temperature
difference between supply air and room air.
Ceiling diffusers allow for large volume flow rates.
The result is a mixed flow ventilation in comfort
zones, with good overall room ventilation, creating
only very little turbulence in the occupied zone.
Type DLQL ceiling diffusers are fitted with a
special baffle element that creates a horizontal
air discharge with high induction levels. Horizontal
air discharge is one-way to four-way. The supply
air to room air temperature difference may range
from –10 to +10 K. To give rooms an aesthetic,
uniform look, Type DLQL diffusers may also
be used for extract air.
Schematic illustration of the DLQL for supply air with one blanking plate
‫ݩ‬
‫ݨ‬
‫ݪ‬
‫ݫ‬
‫ݧ‬
‫ݦ‬
‫ݬ‬
‫ݥ‬
‫ݤ‬
① Diffuser face
② Central fixing screw
③ Baffle element (only for supply air)
④ Casing
⑤ Plenum box
⑥ Cross bar
⑦ Suspension hole
⑧ Spigot
Air patterns
Horizontal air discharge
K1 – 1.4 – 80
One-way air discharge
with three blanking plates
‫ݣ‬
‫ݢ‬
Options
⑨ Lip seal
⑩ Damper blade for volume flow rate balancing
⑪ Blanking plate
Two-way air discharge
with two blanking plates
02/2015 – DE/en
Ceiling diffusers
TOC
General information
Three-way air discharge
with one blanking plate
02/2015 – DE/en
DLQL
Four-way air discharge
without blanking plate
1
K1 – 1.4 – 81
Ceiling diffusers
TOC
Order code
1
Order code
DLQL
DLQL
DLQL – T – Z – H – M – L / 600 x 593 / P1 – RAL ...
݇
݈ ݉ ݊
‫݋‬
 Type
DLQL Ceiling diffuser
 Ceiling system
P
Grid or plasterboard ceiling
T
T-bar ceiling
 System
Supply air
Z
A
Extract air
‫݌‬
‫ݍ‬
‫ݎ‬
‫ݏ‬
 Size of diffuser face plate [mm]
DLQL-P
No entry: size of diffuser face plate =
nominal size – 2 mm
598 For grid size 600
623 For grid size 625
...
Other dimensions, 623 mm max.
DLQL-T
593 For T-bar ceilings, grid size 600
618 For T-bar ceilings, grid size 625
 Connection
H
Horizontal
V
Vertical
 Exposed surface
No entry: powder-coated RAL 9010,
pure white
P1
Powder-coated,
 Damper blade for volume flow rate balancing
specify RAL CLASSIC colour
No entry: none
Gloss level
M
With (only for connection type H)
RAL 9010 50 %
 Accessories
RAL 9006 30 %
No entry: none
All other RAL colours 70 %
L
With lip seal
 Nominal size [mm]
250
300
400
500
600
Order example
DLQL-T-Z-H-M-L/600×593
Ceiling system
System
Connection
Damper blade for volume flow rate balancing
Accessories
Nominal size
Size of diffuser face plate
Exposed surface
K1 – 1.4 – 82
T-bar ceiling
Supply air
Horizontal
With
With lip seal
600
593
RAL 9010, pure white, gloss level 50 %
02/2015 – DE/en
Ceiling diffusers
TOC
Order code
Useful additions
DLQL
DLQL-AB
1
DLQL – AB / 250
݇
 Type
DLQL-AB
݈
Blanking plate for ceiling diffuser DLQL
 Nominal size [mm]
250
300
400
500
600
02/2015 – DE/en
K1 – 1.4 – 83
Ceiling diffusers
TOC
Quick sizing
1
DLQL-*-Z-H
one-way air discharge
(supply air)
Quick sizing tables
provide a good overview
of the volume flow rates
and corresponding
sound power levels
and differential pressures.
The maximum volume
flow rates apply to a
sound power level of
approx. 50 dB (A) with
damper blade position 0°.
Exact values for all
parameters can be
determined with our
Easy Product Finder
design programme.
DLQL
Quick sizing – sound power level and total differential pressure
Damper blade position

Nominal size
l/s
300
400
500
600
DLQL-*-Z-H
two-way air discharge
(supply air)
Δpt
dB(A)
3
20
35
79
5
22
49
87
5
19
43
64
7
17
33
54
5
16
32
53
LWA
Pa
<15
22
31
49
<15
30
42
52
<15
28
42
49
<15
28
42
50
<15
28
41
50
90°
Δpt
dB(A)
3
22
39
87
6
24
54
95
5
21
47
70
8
19
36
59
6
17
35
58
LWA
Pa
<15
22
31
49
<15
30
42
52
<15
29
43
50
<15
29
43
51
<15
28
41
50
dB(A)
6
40
70
158
11
43
98
173
9
38
85
127
14
35
66
107
11
32
63
106
<15
22
31
49
<15
31
43
53
<15
30
44
51
<15
29
43
51
<15
28
41
50
Quick sizing – sound power level and total differential pressure
Damper blade position

Nominal size
l/s
250
300
400
500
600
K1 – 1.4 – 84
Pa
22
54
72
108
36
72
108
144
54
108
162
198
90
144
198
252
126
216
306
396
45°
LWA
Δpt
m³/h
6
15
20
30
10
20
30
40
15
30
45
55
25
40
55
70
35
60
85
110
250
0°
0°
m³/h
15
25
35
50
20
30
40
55
35
50
70
85
50
70
95
115
75
105
140
175
54
90
126
180
72
108
144
198
126
180
252
306
180
252
342
414
270
378
504
630
45°
LWA
Δpt
Pa
Δpt
dB(A)
8
22
43
89
9
20
36
68
10
20
40
59
10
20
36
53
9
19
33
52
Pa
17
30
39
51
18
29
38
50
18
30
42
49
20
32
43
50
16
31
42
50
90°
LWA
Δpt
dB(A)
9
24
48
97
10
22
39
75
11
23
44
65
11
22
40
58
10
20
36
57
LWA
Pa
17
30
39
51
18
29
38
50
19
31
43
50
21
33
44
51
16
31
42
50
dB(A)
16
44
87
177
18
40
72
136
20
41
80
118
20
39
72
106
19
37
66
103
17
30
39
51
19
30
39
51
20
32
44
51
21
33
44
51
16
31
42
50
02/2015 – DE/en
Ceiling diffusers
TOC
Quick sizing
DLQL-*-Z-H
three-way air discharge
(supply air)
DLQL
Quick sizing – sound power level and total differential pressure
Nominal size
l/s
300
400
500
600
LWA
Δpt
Pa
72
126
180
216
108
144
180
234
180
252
324
396
270
360
450
540
396
540
684
846
45°
Δpt
dB(A)
9
27
55
80
13
23
36
61
12
23
39
58
13
23
36
52
12
22
35
53
LWA
Pa
20
34
45
52
23
32
40
49
21
32
42
50
22
35
43
50
19
33
42
50
90°
Δpt
dB(A)
10
30
61
87
14
25
40
67
13
26
43
64
14
25
39
57
13
24
38
58
LWA
Pa
20
34
45
52
23
32
40
49
22
33
43
51
23
36
44
51
19
33
42
50
dB(A)
18
54
110
159
26
46
72
122
24
47
77
115
26
46
72
103
23
43
69
106
20
34
45
52
24
33
41
50
23
34
44
52
23
36
44
51
19
33
42
50
Quick sizing – sound power level and total differential pressure
Damper blade position

Nominal size
l/s
250
300
400
500
600
02/2015 – DE/en
0°
m³/h
20
35
50
60
30
40
50
65
50
70
90
110
75
100
125
150
110
150
190
235
250
DLQL-*-Z-H
four-way air discharge
(supply air)
1
Damper blade position

0°
m³/h
25
35
50
65
35
45
60
75
65
75
95
135
100
130
160
180
145
185
230
275
90
126
180
234
126
162
216
270
234
270
342
486
360
468
576
648
522
666
828
990
45°
LWA
Δpt
Pa
Δpt
dB(A)
10
19
39
66
14
23
41
64
15
20
32
64
18
30
46
58
15
24
38
54
Pa
23
30
40
49
23
31
41
50
23
28
37
50
27
38
46
50
25
34
43
50
90°
LWA
Δpt
dB(A)
11
21
43
72
16
26
46
72
19
25
40
80
20
33
50
63
17
28
44
63
LWA
Pa
22
30
41
49
24
32
41
49
25
30
38
51
27
37
45
50
25
34
43
50
dB(A)
17
34
69
116
28
46
81
127
35
47
75
151
37
62
94
118
30
49
75
107
22
30
40
49
25
32
41
49
26
31
39
51
28
38
46
50
25
34
43
49
K1 – 1.4 – 85
Ceiling diffusers
TOC
Quick sizing
1
The maximum volume
flow rates apply to a
sound power level of
approx. 50 dB (A).
DLQL
DLQL-*-Z-V
one-way air discharge
(supply air)
DLQL-*-Z-V
two-way air discharge
(supply air)
Quick sizing – sound power level
and total differential pressure
Quick sizing – sound power level
and total differential pressure
Nominal size
250
300
400
500
600
m³/h
6
15
20
25
10
20
30
35
15
30
45
50
25
40
55
75
35
60
85
100
LWA
Δpt
Pa
22
54
72
90
36
72
108
126
54
108
162
180
90
144
198
270
126
216
306
360
dB(A)
5
34
60
94
6
24
53
72
5
20
45
56
6
15
28
52
5
15
30
42
<15
34
43
50
15
33
46
51
<15
32
45
49
19
30
40
51
19
32
43
50
Nominal size
250
300
400
500
600

l/s
m³/h
15
25
35
40
20
30
40
50
35
50
70
80
50
70
95
115
75
105
130
165
Pa
54
90
126
144
72
108
144
180
126
180
252
288
180
252
342
414
270
378
468
594
Quick sizing – sound power level
and total differential pressure
Quick sizing – sound power level
and total differential pressure
250
300
400
500
600

20
35
50
60
30
40
50
65
50
70
90
110
75
100
125
150
110
150
190
230
m³/h
72
126
180
216
108
144
180
234
180
252
324
396
270
360
450
540
396
540
684
828
LWA
Δpt
Pa
dB(A)
9
27
55
80
11
19
29
50
9
17
29
43
9
16
25
36
8
15
24
35
19
36
47
53
20
31
40
49
21
33
43
50
20
35
44
50
21
33
42
51
Nominal size
250
300
400
500
600

l/s
25
35
50
65
35
50
65
85
65
85
110
135
100
125
150
170
145
190
235
285
m³/h
90
126
180
234
126
180
234
306
234
306
396
486
360
450
540
612
522
684
846
1026
dB(A)
10
29
56
73
8
18
32
50
9
18
35
45
8
15
28
41
8
15
24
38
DLQL-*-Z-V
four-way air discharge
(supply air)
l/s
LWA
Δpt
DLQL-*-Z-V
three-way air discharge
(supply air)
Nominal size
K1 – 1.4 – 86

l/s
20
35
45
50
16
31
41
49
18
32
44
49
20
33
44
51
20
33
41
50
LWA
Δpt
Pa
dB(A)
9
17
35
59
9
17
29
50
9
16
27
40
11
17
25
32
8
14
22
32
18
29
41
50
<15
30
41
51
19
32
42
49
26
37
45
50
20
33
42
50
02/2015 – DE/en
Ceiling diffusers
TOC
Dimensions and weight
Diffuser face DLQL
DLQL
Dimensions
ϯˣ
Nominal size
250
300
400
500
600
DLQL-P
DLQL-T
□Q1
□Q1
mm
248
298
398
498
598
Aeff
m²
593
593
593
593
593
0.0100
0.0145
0.0258
0.0403
0.0580
Aeff applies to four-way air discharge
DLQL-...-H
Variant
– Ceiling diffuser with square diffuser face
– With plenum box for horizontal duct connection
Nominal sizes
Ceiling tile
– 248, 298, 398, 498, 598, 623
(intermediate sizes 249 to 622,
in increments of 1 mm)
DLQL-Z-H
– H –
Order code detail
02/2015 – DE/en
Construction features
– Spigot suitable for circular ducts to EN 1506
or EN 13180
– Spigot with groove for lip seal
(if accessory lip seal has been ordered)
Air terminal device
– 250, 300, 400, 500, 600
Parts and characteristics
– Perforated square diffuser face
with special baffle element
– Simple installation of the diffuser face due
to central fixing screw with decorative cap
(variant -P)
K1 – 1.4 – 87
1
Ceiling diffusers
TOC
Dimensions and weight
DLQL
Square diffuser face with plenum box
for horizontal duct connection
1
C
ˣ
A
˥
͌
ϯ˥
ϯˣ
Dimensions [mm] and weight [kg]
DLQL-P DLQL-T
Nominal size
□Q1
ØD
H1
□Q3
H3
A
C
Plenum box
mm
m
kg
250
248
593
158
8
216
250
139
50
AK-Uni-008
2.8
300
298
593
158
8
290
250
139
50
AK-Uni-001
4.0
400
398
593
198
8
372
295
164
50
AK-Uni-002
6.5
500
498
593
248
8
476
345
189
48
AK-Uni-010
9.6
600
598
593
313
8
590
410
222
50
AK-Uni-012
13.8
DLQL-T: □Q1 = 618 is available for T-bar ceilings with grid size 625
DLQL-P : □Q1 to 623 mm available
K1 – 1.4 – 88
02/2015 – DE/en
Ceiling diffusers
TOC
Dimensions and weight
DLQL-...-V
DLQL-Z-V
– V –
Order code detail
DLQL
Variant
– Ceiling diffuser with square diffuser face
– With plenum box for vertical duct connection
Construction features
– Spigot suitable for circular ducts to EN 1506
or EN 13180
1
Nominal sizes
Ceiling tile
– 248, 298, 398, 498, 598, 623
(intermediate sizes 249 to 622,
in increments of 1 mm)
Air terminal device
– 250, 300, 400, 500, 600
Parts and characteristics
– Square diffuser face
– Plenum box for vertical duct connection
DLQL...-V
ϯ˥
ˣ
C
˥
ØD
ϯˣ
Dimensions [mm] and weight [kg]
DLQL-P
Nominal size
250
300
400
500
600
DLQL-T
□Q1
248
298
398
498
598
ØD
H1
□Q3
H3
C
m
mm
593
593
593
593
593
123
158
198
248
313
kg
8
8
8
8
8
198
272
354
458
572
20
26
36
47
56
50
50
50
50
50
0.9
1.2
2.0
3.1
4.4
DLQL-T: □Q1 = 618 is available for T-bar ceilings with grid size 625
DLQL-P : □Q1 to 623 mm available
02/2015 – DE/en
K1 – 1.4 – 89
Ceiling diffusers
TOC
Installation details
1
Installation types
DLQL
Flush ceiling installation
with square plenum box
Flush ceiling installation
with vertical connection
For more installation details
see Chapter K1 – 1.6.
These are only schematic
diagrams to illustrate
installation details.
Ceiling systems
K1 – 1.4 – 90
Grid ceiling
Continuous ceiling
T-bar ceiling
T-bar ceiling
(diffuser face
rests on T-bars)
02/2015 – DE/en
Ceiling diffusers
TOC
Specification text
Standard text
This specification text
describes the general
properties of the product.
Texts for variants can be
generated with our
Easy Product Finder
design programme.
Ceiling diffusers with perforated square diffuser
face. Supply air and extract air variants for
comfort zones. Diffuser face with baffle element
for horizontal one-way to four-way supply air
discharge. For flush installation into all kinds
of suspended grid or continuous plasterboard
ceilings. Ready-to-install component which
consists of the diffuser face with baffle element
(only for supply air), and either a casing with
top entry spigot or a plenum box with side
entry spigot. Perforated diffuser face suitable
for central screw fixing (variant -P).
Spigot suitable for ducts to EN 1506 or EN 13180.
Sound power level of the air-regenerated
noise measured according to EN ISO 5135.
Special characteristics
– Horizontal one-way to four-way
supply air discharge
– Perforated diffuser face made of galvanised
sheet steel
– For all types of ceiling systems
– Horizontal or vertical duct connection
DLQL
Materials and surfaces
– Perforated diffuser face made of galvanised
sheet steel
– Casing, damper blade and plenum box
made of galvanised sheet steel
– Baffle element made of acoustic fleece
– Lip seal made of rubber
– Casing powder-coated RAL 9005, jet black
– Diffuser face electrocoated RAL 9010,
pure white
– P1: Powder-coated, RAL CLASSIC colour
Technical data
– Nominal sizes – ceiling tile:
248, 298, 398, 498, 593, 598, 618, 623 mm
– Nominal sizes – diffuser:
250, 300, 400, 500, 600 mm
– Minimum volume flow rate:
6 – 145 l/s or 22 – 522 m³/h
– Maximum volume flow rate,
with LWA ≅ 50 dB(A):
275 – 285 l/s or 990 – 1026 m³/h
– Supply air to room air temperature difference:
–10 to +10 K
Sizing data
–  ______________________________ [m³/h]
– Δpt _______________________________ [Pa]
– LWA Air-regenerated noise __________ [dB(A)]
Order options
 Type
DLQL Ceiling diffuser
 Ceiling system
P
Grid or plasterboard ceiling
T
T-bar ceiling
 System
Z
Supply air
A
Extract air
 Size of diffuser face plate [mm]
DLQL-P
No entry: size of diffuser face plate =
nominal size – 2 mm
598 For grid size 600
623 For grid size 625
...
Other dimensions, 623 mm max.
DLQL-T
593 For T-bar ceilings, grid size 600
618 For T-bar ceilings, grid size 625
 Connection
H
Horizontal
V
Vertical
 Exposed surface
No entry: powder-coated RAL 9010,
pure white
P1
Powder-coated,
 Damper blade for volume flow rate balancing
specify RAL CLASSIC colour
No entry: none
M
With (only for connection type H)
Gloss level
RAL 9010 50 %
 Accessories
RAL 9006 30 %
No entry: none
All other RAL colours 70 %
L
With lip seal
 Nominal size [mm]
250
300
400
500
600
02/2015 – DE/en
K1 – 1.4 – 91
1
Ceiling diffusers
TOC
Specification text
1
Useful additions
Order options
DLQL
 Type
DLQL-AB Blanking plate for ceiling diffuser DLQL
 Nominal size [mm]
250
300
400
500
600
K1 – 1.4 – 92
02/2015 – DE/en
TOC
1.6 –
X X Basic
information and nomenclaturetestregistrierung
Ceiling diffusers
1
Basic information and nomenclature
■ Product selection
■ Principal dimensions
■ Nomenclature
■ Sizing and sizing example
■ Installation information
■ Commissioning
02/2015 – DE/en
K1 – 1.6 – 1
Ceiling diffusers
TOC
Basic information and nomenclature
1
Product selection
Ceiling swirl diffusers
AIRNAMIC
VDW
TDVSilentAIR
Circular
●
●
●
Square
●
RFD
FD
TDFSilentAIR
●
●
●
VD
VDL
FDE
Diffuser face style
●
●
●
Diffuser face
Circular
●
●
●
●
●
●
Square
●
●
●
●
●
●
●
●
●
●
●
Galvanised sheet steel
Aluminium
●
Plastic
●
●
●
●
●
●
●
Air control blades
Fixed
●
●
Adjustable
●
●
Plastic, black and white
●
●
●
●
●
●
●
Duct connection
Horizontal
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Vertical
FLEXTRO
●
Attachments
Damper blade
Pressure tap
Actuator
●
●
Protective cage
●
●
Extended border
●
●
Accessories
Lip seal
●
Nominal sizes
Circular diffuser face
Square diffuser face
●
300, 400,
500, 600, 625
300, 400,
300, 600,
500, 600,
625
625, 825
400, 600
●
●
300, 400,
500, 600,
625
●
300, 400,
500, 600,
625
●
300, 400,
500, 600,
625
●
425, 600,
775, 1050
125, 160,
200, 250,
315, 400
Spigot*
600, 625
315, 400,
630, 800
250, 315
65 – 1080
51 – 365
Technical data
Volume flow rate range [l/s]
13 – 385
Volume flow rate range [m³/h] 47 – 1386
Supply air to room air
temperature difference
●
7 – 470
11 – 315
4 – 330
9 – 235
10 – 295
25 – 1692
40 – 1134
14 – 1188
31 – 846
36 – 1026 342 – 5364 234 – 3888 184 – 1314
–12 – +10 K
95 – 1490
–12 – +15 K
–12 – +10 K
Possible
Not possible
*Nominal diameter
K1 – 1.6 – 2
02/2015 – DE/en
Ceiling diffusers
TOC
Basic information and nomenclature
Product selection
1
Ceiling swirl diffusers
with perforated face plate
Design ceiling swirl diffusers
Diffuser face style
Circular
Square
Diffuser face
Circular
Square
Galvanised sheet steel
Aluminium
Plastic
Air control blades
Fixed
Adjustable
Plastic, black and white
Duct connection
Horizontal
Vertical
FLEXTRO
Attachments
Damper blade
Pressure tap
Actuator
Accessories
Lip seal
Protective cage
Extended border
Nominal sizes
XARTO
ADD
DCS
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Circular diffuser face
600
Square diffuser face
600, 625
Spigot*
Technical data
250, 300,
450, 500,
600
250, 300,
450, 500,
600, 625
125, 160,
200, 250,
315
125, 160,
200, 250,
315, 400
600, 625
Volume flow rate range [l/s]
31 – 265
20 – 465
4 – 260
Volume flow rate range [m³/h]
110 – 954
72 – 1674
16 – 936
Supply air to room air temperature difference
●
–12 – +10 K
Possible
Not possible
*Nominal diameter
02/2015 – DE/en
K1 – 1.6 – 3
Ceiling diffusers
TOC
Basic information and nomenclature
1
Product selection
Ceiling diffusers
VDR
Diffuser face style
Circular
Square
Diffuser face
Circular
Square
Galvanised sheet steel
Aluminium
Plastic
Air control blades
Fixed
Adjustable
Plastic, black and white
Duct connection
Horizontal
Vertical
FLEXTRO
Attachments
Damper blade
Pressure tap
Actuator
Accessories
Lip seal
Protective cage
Extended border
Nominal sizes
Circular diffuser face
●
●
●
●
●
●
●
Volume flow rate range [m³/h]
Supply air to room air
temperature difference
●
DLQ
●
●
●
●
●
●
●
●
●
DLQ-AK
DLK-Fb
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
250, 300,
400, 500,
600, 625
175 – 1495
20 – 665
630 – 5382
72 – 2394
–10 to +15 K
●
DLQL
●
250, 300,
400, 500,
600, 625
315, 400, 630, 800
ADLR
●
630, 800
Square diffuser face
Spigot*
Technical data
Volume flow rate range [l/s]
ADLQ
244, 300,
356, 412,
468, 542,
598, 654
600
625
250, 300,
400, 500,
600
300, 400,
500, 600,
625
600, 625
20 – 700
20 – 650
6 – 285
40 – 565
220 – 460
72 – 2520
72 – 2340
22 – 1026
144 – 2034
792 – 1656
–10 to +10 K
Possible
Not possible
*Nominal diameter
K1 – 1.6 – 4
02/2015 – DE/en
Ceiling diffusers
TOC
Basic information and nomenclature
Principal dimensions
ØD [mm]
Outside diameter of the spigot
ØD₁ [mm]
Outer diameter of a circular diffuser face
ØD₂ [mm]
Diameter of a circular diffuser face style
ØD₃ [mm]
Diameter of a circular plenum box
□Q₁ [mm]
Outer diameter of a square diffuser face
□Q₂ [mm]
Dimensions of a square diffuser face style
□Q₃ [mm]
Dimensions of a square plenum box
H₂ [mm]
Height of a ceiling diffuser, from the lower
edge of the suspended ceiling to the upper edge
of the spigot
H₃ [mm]
Height of a ceiling diffuser with plenum box,
from the lower edge of the suspended ceiling to
the upper edge of the plenum box or of the spigot
A [mm]
Position of the spigot, defined by the distance
of the spigot centre line to the lower edge
of the suspended ceiling
C [mm]
Length of the spigot
m [kg]
Weight
H₁ [mm]
Distance (height) from the lower edge
of the suspended ceiling to the lower edge
of the diffuser face
Nomenclature
LWA [dB(A)]
A-weighted sound power level
of air-regenerated noise
 [m³/h] and [l/s]
Volume flow rate
Δtz [K]
Supply air temperature difference
02/2015 – DE/en
Δpt [Pa]
Total differential pressure
Aeff [m²]
Effective air discharge area
All sound power levels are based on 1 pW.
K1 – 1.6 – 5
1
Ceiling diffusers
TOC
Basic information and nomenclature
1
Sizing with the help
of this catalogue
This catalogue provides convenient quick sizing
tables for ceiling diffusers.
The tables give supply air volume flow rates
for all nominal sizes. The maximum volume flow
rates are for an open damper blade. A smaller
opening of the damper blade results in higher
sound power levels and a higher total differential
pressure. The tables show values for damper
blade positions 45° and 90°.
Sizing data for other volume flow rates
and damper blade positions can be
determined quickly and precisely using
the Easy Product Finder design programme.
Sizing example
Given data
 = 300 l/s (1280 m3/h)
Square ceiling diffuser, steel,
with fixed air control blades
Maximum sound power level 40 dB(A)
with damper blade position 45°
Four-way air discharge
Quick sizing
Type DLQ
Nominal sizes: 600, 625
Selected: DLQ/600
Easy Product Finder
The Easy Product Finder
allows you to size
products using your
project-specific data.
You will find
the Easy Product Finder
on our website.
K1 – 1.6 – 6
02/2015 – DE/en
Ceiling diffusers
TOC
Basic information and nomenclature
Description
Installation information
– Installation and making connections
to be performed by others
– The optimum aerodynamic function
is only achieved with flush ceiling installation
– The diffuser face is fixed to the plenum box
cross bar using the central fixing screw
– Central fixing screw is concealed
by a decorative cap
Installation types
Flush ceiling installation
with square plenum box
1
Flush ceiling installation
with circular plenum box
‫ݢ‬
‫ݣ‬
‫ݢ‬
‫ݣ‬
‫ݤ‬
‫ݤ‬
① Duct
② Suspension hole
③ Diffuser face
① Duct
② Suspension lug
③ Diffuser face
– Horizontal duct connection
– Four suspension holes
– Suspension with cords, wires or hangers,
to be provided by others
– Horizontal duct connection
– Three suspension lugs
– Suspension with cords, wires or hangers,
to be provided by others
Flush ceiling installation
with plenum box FLEXTRO
Freely suspended installation
‫ݣ‬
‫ݣ‬
‫ݢ‬
‫ݢ‬
‫ݤ‬
‫ݤ‬
① Duct
② Suspension lug
③ Diffuser face
– Spigot at 30° angle
– Four suspension lugs
– Suspension with cords, wires or hangers,
to be provided by others
02/2015 – DE/en
‫ݥ‬
① Duct
② Suspension lug
③ Diffuser face
④ Extended border
– Vertical duct connection
– Three suspension lugs
– Suspension with cords, wires or hangers,
to be provided by others
K1 – 1.6 – 7
Ceiling diffusers
TOC
Basic information and nomenclature
1
Installation
without plenum box
Flush ceiling installation with standard
cross bar G1, screw-fixed to ceiling
Flush ceiling installation with standard
cross bar G1, with fixing tabs mortared in
‫ݥ‬
‫ݥ‬
‫ݤ‬
‫ݢ‬
‫ݣ‬
① Diffuser face
② Central fixing screw
③ Ceiling tile
④ Standard cross bar
‫ݤ‬
‫ݢ‬
‫ݣ‬
① Diffuser face
② Central fixing screw
③ Fixing tab
④ Standard cross bar
– No spigot
– Fixing of the standard cross bar
to the ceiling tile is to be performed by others
– No spigot
– The standard cross bar has to be mortared
into the ceiling by others
Flush ceiling installation
with duct cross bar E1
‫ݥ‬
‫ݤ‬
‫ݣ‬
‫ݢ‬
① Diffuser face
② Central fixing screw
③ Duct
④ Duct cross bar
– Vertical duct connection
– Fixing of the duct cross bar
to the duct is to be performed by others
Ceiling systems
K1 – 1.6 – 8
Installation into grid ceilings
Installation in continuous ceilings
– Fix the plenum box to the ceiling
– The ceiling tile of the grid ceiling
is independent of the ceiling diffuser
– Fix the diffuser face after the ceiling
has been completed
– Fix plenum box
(including diffuser face, if necessary)
to the ceiling
– Adjust plasterboard ceiling tile as required
– If necessary, fix the diffuser face after
the ceiling has been completed
02/2015 – DE/en
Ceiling diffusers
TOC
Basic information and nomenclature
Diffuser face sealing
and fixing
Installation in T-bar ceilings
Installation in T-bar ceilings,
diffuser face rests on T-bars
– Fix the plenum box to the ceiling
– The T-bar ceiling is independent
of the ceiling diffuser
– Fix the diffuser face below the T-bars
after the ceiling has been completed
– Fix the plenum box to the ceiling, if necessary
– The diffuser rests on the T-bars
Diffuser face – sealing
Diffuser face – central screw fixing
1
‫ݢ‬
X
‫ݥ‬
X
X
‫ݣ‬
‫ݢ‬
‫ݣ‬
‫ݤ‬
‫ݤ‬
① Plenum box
② Diffuser face
③ Seal
④ Ceiling tile
– The self-adhesive sealing tape (supplied)
has to be applied to the return
edges of the plenum box by others
02/2015 – DE/en
‫ݥ‬
① Diffuser face
② Cross bar
③ Central fixing screw
④ Decorative cap
– Using the central fixing screw,
fix the diffuser face to the cross bar
of the plenum box
– Attach the decorative cap
K1 – 1.6 – 9
Ceiling diffusers
TOC
Basic information and nomenclature
1
Commissioning
Volume flow rate balancing
When several diffusers are connected to just
one volume flow controller, it may be necessary
to balance the volume flow rates.
– AIRNAMIC, XARTO, FLEXTRO:
The diffuser face can be removed to access
the damper blade; the damper blade can
then be set in 15° intervals between 0 and 90°
– Ceiling diffusers with universal plenum box
and damper blade (variant -M):
The diffuser face can be removed to access
the damper blade; the damper blade can
then be set to any position between 0 and 90°
– Ceiling diffusers with universal plenum box,
damper blade and pressure tap (variant -MN):
The diffuser face need not be removed since
the damper blade can be set with two cords
(white and green).
AK-Uni-...-MN Volume flow rate balancing
AK-Uni-...-MN Volume flow rate balancing
‫ݢ‬
‫ݢ‬
‫ݣ‬
‫ݣ‬
① Damper blade
② White cord for opening the damper blade
Open, 0°
Closed, 90°
AIRNAMIC, XARTO, FLEXTRO
Volume flow rate balancing
AIRNAMIC, XARTO, FLEXTRO
Volume flow rate balancing
‫ݢ‬
‫ݣ‬
‫ݢ‬
‫ݤ‬
① Damper blade
② Sticker explaining the damper blade position
③ Setting lever
Open, 0°
K1 – 1.6 – 10
① Damper blade
② Green cord for closing the damper blade
‫ݣ‬
‫ݤ‬
① Damper blade
② Sticker explaining the damper blade position
③ Setting lever
Closed, 90°
02/2015 – DE/en
Ceiling diffusers
TOC
Basic information and nomenclature
Volume flow rate measurement
Ceiling diffusers with universal plenum box,
damper blade and pressure tap (variant -MN)
allow for volume flow rate balancing even
with the diffuser face in place.
1
– Connect the measuring tube
to the digital manometer
– Read the effective pressure
– Read the volume flow rate off
the characteristic or calculate it
– If necessary, adjust the damper
blade position with the cords
A characteristic is included
with each AK-Uni plenum box.
AK-Uni-...-MN volume flow rate measurement
‫ݣ‬
‫ݢ‬
‫ݤ‬
X
‫ݨ‬
‫ݥ‬
‫ݦ‬
X
‫ݧ‬
‫ݢ‬
‫ݣ‬
① Measuring tube
② Pressure tap
③ Damper blade for volume flow rate balancing
④ White cord for opening the damper blade
⑤ Green cord for closing the damper blade
⑥ Digital manometer
⑦ Text label indicating plenum box variant
For K values
Volume flow rate calculation
for the AK-Uni plenum boxes for air density 1.2 kg/m³
refer to Chapter K1 – 1.5.
‫= ݑ‬C×
02/2015 – DE/en
͍Æw
Volume flow rate calculation
for other air densities
‫= ݑ‬C×
͍Æw ×
1.2
Ǿ
K1 – 1.6 – 11