Single-Use Pulling Eye Solution Step 1: Strip it Step 2: Crimp it Anixter’s single-use pulling-eye system is a cost-effective alternative to traditional pulling eyes. With the ability to attach pulling eyes prior to shipment, Anixter can reduce cable waste and labor cost, which minimizes tooling and inventory expenditures and improves contractor efficiency. Our Solution Product Features PARAPULL ° ° ° ° ° ° ° Steel lugs Can be used on aluminum and copper Disposable lugs and lanyards Color-coded to crimp dies Crimp to conductor, not jacket Compatible with standard crimp tool Small pulling heads Product Benefits Step 3: Pull it cost than other methods ° Lower Lower cost of tooling ° No increase to cost of conduit ° Easier to pull multiple lugs ° Easier to select correct crimp die ° Anixter cuts the cable to circuit length and installs and fits the lugs to the cable, which is then checked for quality. The prepped cable is put on Anixter’s PARAPULL reels and shipped to the job site. Anixter’s PARAPULL solution spools three or four cables into their own compartment, which is then delivered on one multiflange, shippable reel. Because the separate compartments prevent the cable legs from binding with each other, contractors can pull each leg simultaneously, allowing for a smoother pull even when pulling into a conduit. PARAPULLs are especially valuable when space to set up multiple jack stands is limited, such as in a high-rise building. 1.800.ANIXTER | anixter.com Products. Technology. Services. Delivered Globally. Single-Use Pulling Eye Solution Lug With No Lanyard Disposable Lugs and Lanyards Anixter Part No. Anixter Part No. Anixter Part No. Anixter Part No. Anixter Part No. AWG Anixter Part No. 11 in. 14 in. 21 in. 28 in. 35 in. 8 6 4 3 2 1 1/0 2/0 3/0 1/0 250 300 400 500 600 750 1,000 452028 --------------------- --452045 452041 452037 452033 452029 ----------- --------- --------- ------------452049 453459 456523 452053 452047 473485 473489 452061 456527 456531 456535 ------------452050 453460 456524 452054 452058 473486 473490 452062 456528 456532 456536 ------------452051 453461 456525 452055 452049 473487 473491 452063 456529 456533 456537 ------------452052 453462 456526 452046 452060 473488 473492 452064 456530 456534 456538 Specifications for THHN and XHHW Copper Wire Wire Size 8 AWG 6 AWG 4 AWG 3 AWG 2 AWG 1 AWG 1/0 AWG 2/0 AWG 3/0 AWG 4/0 AWG 250 MCM 300 MCM 350 MCM 400 MCM 500 MCM 600 MCM 750 MCM 1000 MCM Max Load (lb.) One Tool Five Tools 130 210 300 400 500 669 844 1000 1250 1650 2000 2400 2400 2400 4000 4200 4300 5000 650 1050 1500 2000 2500 3345 4220 5000 6250 8250 10000 12000 12000 12000 20000 21000 21500 25000 Min Conductor Diameter (in.) 0.134 0.169 0.213 0.238 0.268 0.299 0.336 0.376 0.423 0.475 0.520 0.570 0.616 0.659 0.736 0.813 0.908 1.060 Minimum Conduit Size* (in.) Max Conductor Diameter (in.) 1 Wire 2 Wires 3 Wires 4 Wires 5 Wires 0.146 0.184 0.232 0.260 0.292 0.332 0.373 0.419 0.470 0.528 0.575 0.631 0.681 0.728 0.813 0.893 0.998 1.153 ------------1 1 1 1 1/4 1 1/4 1 1/4 2 1 1/2 1 1/2 2 2 2 ------------1 1/4 1 1/4 1 1/2 1 1/2 2 2 2.5 2 1/2 2 1/2 2 1/2 3 3 ------------1 1/4 1 1/2 1 1/2 2 2 2 2.5 2 1/2 2 1/2 3 3 3 1/2 ------------1 1/2 2 2 2 2 1/2 2 1/2 2 1/2 2 1/2 3 3 3 1/2 4 ------------2 2 2 1/2 2 1/2 2 1/2 2 1/2 3 3 3 1/2 3 1/2 4 4 1/2 Crimper 12 to 15 Ton Die Crimper 15 Ton Die Crimper * For use on THHN and XHHW copper wire only. May require special service (such as removing bushing and installing extra guide pulleys) when pulling maximum diameter wires through minimum size conduit. About Anixter: anixter.com/aboutus Legal Statement: anixter.com/legalstatement 12D020X00 © 2013 Anixter Inc. • 09/13 Anixter Inc. World Headquarters 2301 Patriot Boulevard Glenview, Illinois 60026 224.521.8000 1.800.ANIXTER | anixter.com Products. Technology. Services. Delivered Globally.