Q Anti Vibration
advertisement
Q Anti Vibration Anti Vibration Spring Hanger Cup Spring Mount Housed Spring Mount Inertia Base Anti Vibration Hanger Anti Vibration Mount Ribbed Mounting Pad Waffle Pad Square Cell Pad Cork Sandwich Pad Metal Sandwich Pad Ribbed Multi Layer Pad Square Cell Multi Layer Pad 192 193 194 195 197 198 199 200 201 202 203 204 205 191 EN-DUB 03/2016 Q Anti Vibration Spring Hanger Features and benefits ■ brackets and springs powder coated spring hangers are used to isolate suspended sources of both noise and ■ designed to meet BS1726, class B vibration ■ suspended mechanical equipment such as air handling units, FCU's, cabinet fans, piping and ductwork in close proximity to rotating mechanical equipment are typical applications of spring hangers ■ color coded springs as per load ratings ■ outer diameter equal to at least 85% of working height ■ springs designed for 50% overload capacity ■ Part No. DM SH2 5 /10 DM SH2 5 /15 DM SH2 5 /20 DM SH2 5 /30 DM SH2 5 /40 DM SH2 5 /60 DM SH25 / 100 DM SH25 / 160 DM SH25 / 200 DM SH25 / 250 DM SH25 / 300 DM SH25 / 400 DM SH25 / 500 DM SH25 / 600 DM SH25 / 800 DMSH25/1050 DMSH25/1250 R M10 M10 M10 M10 M10 M12 M12 M12 M12 M12 M16 M16 M16 M16 M16 M16 M16 L 60 mm 60 mm 60 mm 60 mm 60 mm 87 mm 87 mm 87 mm 87 mm 87 mm 100 mm 100 mm 100 mm 100 mm 100 mm 100 mm 100 mm B H d1 FH Deflection (mm) (mm) (mm) (mm) (mm) 52 52 52 52 52 65 65 65 65 65 85 85 85 85 85 85 85 104 104 104 104 104 138 138 138 138 138 157 157 157 157 157 157 157 10.5 10.5 10.5 10.5 10.5 12.5 12.5 12.5 12.5 12.5 16.5 16.5 16.5 16.5 16.5 16.5 16.5 80 80 80 80 80 96 96 96 96 96 115 115 115 115 115 115 115 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 Fa,z Colour (N) 100 150 200 300 400 600 1,000 1,600 2,000 2,500 3,000 4,000 5,000 6,000 8,000 10,500 12,500 192 EN-DUB 03/2016 Q 05 305 Red Purple Grey Green Blue Yellow Black White Green Blue Red Purple Grey Green Blue Yellow Black Anti Vibration Q Cup Spring Mount Features and benefits Cup Spring Mounts are used to isolate ■ springs powder coated ■ designed to meet BS1726, class B noise and vibration from floor mounting equipents ■ pumps, packaged air handling units, air conditioning units, centrifugal and axial fans, inertia bases etc. ■ color coded springs as per load ratings ■ outer diameter equal to at least 85% of working height ■ springs designed for 50% overload capacity ■ neoprene top and bottom with nonskid bolt down base ■ plated leveling / lock bolt ■ Part No. DM CS2 5 -10 DM CS2 5 -15 DM CS2 5 -20 DM CS2 5 -30 DM CS2 5 -40 DM CS2 5 -60 DM CS25 - 100 DM CS25 - 160 DM CS25 - 200 DM CS25 - 250 DM CS25 - 300 DM CS25 - 400 DM CS25 - 500 DM CS25 - 600 DMCS25-1050 DMCS25-1250 Bolt M16 M16 M16 M16 M16 M16 M16 M16 M16 M16 M20 M20 M20 M20 M20 M20 L 110 mm 110 mm 110 mm 110 mm 110 mm 110 mm 110 mm 110 mm 110 mm 110 mm 140 mm 140 mm 140 mm 140 mm 140 mm 140 mm B d1 k FH Deflection (mm) (mm) (mm) (mm) (mm) 65 65 65 65 65 75 75 75 75 75 100 100 100 100 100 100 M10 M10 M10 M10 M10 M10 M10 M10 M10 M10 M12 M12 M12 M12 M12 M12 90 90 90 90 90 90 90 90 90 90 120 120 120 120 120 120 115 115 115 115 115 125 125 125 125 125 168 168 168 168 168 168 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 Fa,z Colour (N) 100 150 200 300 400 600 1,000 1,600 2,000 2,500 3,000 4,000 5,000 6,000 10,500 12,500 Red Purple Grey Green Blue Yellow Black White Green Blue Red Purple Grey Green Yellow Black 193 Q 05 310 EN-DUB 03/2016 Q Anti Vibration Housed Spring Mount Features and benefits Housed Spring Mount design provides ■ mountings must be adjusted so that horizontal stability, high loading upper housing clears lower housing by capacity and protective spring at least 6 mm and not more than 12 enclosure mm ■ all mounts have external leveling ■ application examples include: chiller, arrangement, capable of compensating AHU's, pumps, centrifugal / axial fans, for full static deflection condensing units, roof top packaged ■ inner walls of lower casing have units, reciprocating compressors, DG resilient rubber snubbers sets, punch presses, drop hammers and ■ deflection is at rated load with 15% floor pipe supports (normally at first tolerance few pipe support points leading from ■ all mounts have approximately 50% isolated equipment) ■ springs powder coated overload capacity ■ designed to meet BS1726, class B ■ Part No. DMHS 1 -60 DM HS1 - 100 DM HS1 - 160 DM HS1 - 200 DM HS1 - 250 DM HS1A - 300 DM HS1A - 400 DM HS1A - 500 DM HS1A - 600 DM HS1A - 800 DMHS1A-1050 DMHS1A-1250 DM HS2 - 600 DM HS2 - 800 DM HS2- 1 000 DM HS2- 1 200 DM HS2- 1 600 DM HS2- 2 100 DM HS2- 2 500 DM HS4- 1 200 DM HS4- 1 600 DM HS4- 2 000 DM HS4- 2 400 DM HS4- 3 200 DM HS4- 4 200 DM HS4- 5 000 Bolt M12 M12 M12 M12 M12 M16 M16 M16 M16 M16 M16 M16 M20 M20 M20 M20 M20 M20 M20 M20 M20 M20 M20 M20 M20 M20 L 160 mm 160 mm 160 mm 160 mm 160 mm 200 mm 200 mm 200 mm 200 mm 200 mm 200 mm 200 mm 285 mm 285 mm 285 mm 285 mm 285 mm 285 mm 285 mm 285 mm 285 mm 285 mm 285 mm 285 mm 285 mm 285 mm B s d1 k FH Deflection (mm) (mm) (mm) (mm) (mm) (mm) 92 92 92 92 92 115 115 115 115 115 115 115 115 115 115 115 115 115 115 210 210 210 210 210 210 210 5.0 5 5 5 5 10 10 5 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 Ø 10.0 Ø 10.0 Ø 10.0 Ø 10.0 Ø 10.0 Ø 12.0 Ø 12.0 Ø 12.0 Ø 12.0 Ø 12.0 Ø 12.0 Ø 12.0 Ø 16.0 Ø 16.0 Ø 16.0 Ø 16.0 Ø 16.0 Ø 16.0 Ø 16.0 Ø 16.0 Ø 16.0 Ø 16.0 Ø 16.0 Ø 16.0 Ø 16.0 Ø 16.0 147 147 147 147 147 180 180 147 180 180 180 180 265 265 265 265 265 265 265 265 265 265 265 265 265 265 116 116 116 116 116 158 158 116 158 158 158 158 163 163 163 163 163 163 163 163 163 163 163 163 163 163 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 194 EN-DUB 03/2016 Q 05 315 Fa,z Colour (N) 600 1,000 1,600 2,000 2,500 3,000 4,000 5,000 6,000 8,000 10,500 12,500 6,000 8,000 10,000 12,000 16,000 21,000 25,000 12,000 16,000 20,000 24,000 32,000 42,000 50,000 Yellow Black White Green Blue Red Purple Grey Green Blue Yellow Black Red Purple Grey Green Blue Yellow Black Red Purple Grey Green Blue Yellow Black Anti Vibration Q Inertia Base Features and benefits Inertia Base is specially designed and ■ Inertia Base made from standard engineered to pour concrete, which structural channel or formed steel after curing is used as mechanical channel depend upon the design. It is vibration isolated reinforced inertia used 12 mm reinforcement rod welded base for the equipments in 150 mm spacing for better concrete ■ these Inertia Base are recommended to strength. Inertia Base is suplied with use under heavy start up and shut red oxide primer coating. down vibration amplitude equipments ■ Diamond Walraven Vibration Isolator such as generators, IC engines, large Spring Mount will be supplied together fans, centrifugal chillers etc. as per design ■ Part No. DMI B 500 DMI B 750 DMIB 1 000 DMIB 1 250 DMIB 1 500 DMIB 1 750 DMIB 2 000 DMIB 2 250 DMIB 2 500 DMIB 2 750 DMIB 3 000 Further info Base Thickness Chart 196 195 Q 05 320 EN-DUB 03/2016 Q Anti Vibration Base Thickness Chart 196 EN-DUB 03/2016 Q 05 320 Anti Vibration Q Anti Vibration Hanger Features and benefits ■ constructed of a neoprene element in a square powder coated bracket Part No. DMRH10 DMRH20 DMRH30 DMRH50 DMRH70 DMR H 120 R M10 M10 M10 M10 M10 M10 B H h Deflection (mm) (mm) (mm) (mm) 55 55 55 55 55 55 75 75 75 75 75 75 40 40 40 40 40 40 8 8 8 8 10 10 Fa,z Colour (N) 100 200 300 500 700 1,200 Blue Green Red Yellow Brown Orange 197 Q 05 325 EN-DUB 03/2016 Q Anti Vibration Anti Vibration Mount Features and benefits constructed of a neoprene element encased within two steel caps ■ compact model for space saving installations ■ Part No. DMAVM DMAVMC R M10 M10 B H h Deflection (mm) (mm) (mm) (mm) 41 32 37 27 25 19 4 4 Fa,z (N) 900 600 198 EN-DUB 03/2016 Q 05 330 Anti Vibration Q Ribbed Mounting Pad Features and benefits alternate high-low ribbed construction pads can be cut to be slightly larger than the size of the leg or machine, using shears or knife ■ easy field installation ■ multiple layers of Ribbed Mounting Pad can be used to increase deflection ■ ■ Part No. HIMOAVP381818 HIMOAVP381212 HIMOAVP380808 HIMOAVP380606 HIMOAVP380404 HIMOAVP380303 L 450 mm 300 mm 200 mm 150 mm 100 mm 75 mm B s Rec. Load (mm) (mm) (N) 450 300 200 150 100 75 10 10 10 10 10 10 4,100 2,750 1,800 1,350 900 650 Fa,z (N) 4,800 3,100 2,050 1,500 1,050 750 199 Q 05 335 EN-DUB 03/2016 Q Anti Vibration Waffle Pad Features and benefits ■ ■ easy field installation no need for bolting Part No. DMAVWP341818 DMAVWP341212 DMAVWP340808 DMAVWP340606 DMAVWP340404 L 450 mm 300 mm 200 mm 150 mm 100 mm ■ ■ designed with in-built section cups easy cut design without tools allows job site flexibility B s Rec. Load (mm) (mm) (N) 450 300 200 150 100 20 20 20 20 20 4,100 2,750 1,800 1,350 900 Fa,z (N) 4,800 3,100 2,050 1,500 1,050 200 EN-DUB 03/2016 Q 05 340 Anti Vibration Q Square Cell Pad Features and benefits ■ Square Cell Pad consist of 81 sections ■ excellent high frequency sound of size 50 mm x 50 mm seperated by a attentuation as compared to waffle thin web which can be easily cut to fit pads ■ standard size for ease of handling loading requirements Part No. DMACMSC341818 L 450 mm B s Rec. Load (mm) (mm) (N) 450 20 4,500 Fa,z (N) 6,000 201 Q 05 345 EN-DUB 03/2016 Q Anti Vibration Cork Sandwich Pad Features and benefits ■ Cork Sandwich Pad are laminated pads ■ easy field installation ■ no need for bolting having ⅜” thick close grained cork securely bonded between two layers of ■ offers highest level of sound ¼” alternate low-high ribbed neoprene attentuation and vibration insulation rubber pads Part No. HIMOAVSP781818 HIMOAVSP781212 HIMOAVSP780808 HIMOAVSP780606 HIMOAVSP780404 HIMOAVSP780303 L 450 mm 300 mm 200 mm 150 mm 100 mm 75 mm B s Rec. Load (mm) (mm) (N) 450 300 200 150 100 75 22 22 22 22 22 22 7,200 7,200 3,200 2,400 1,600 1,200 Fa,z (N) 9,000 6,000 4,000 3,000 2,000 1,500 202 EN-DUB 03/2016 Q 05 350 Anti Vibration Q Metal Sandwich Pad Features and benefits ■ Metal Sandwich Pads are constructed ■ designed for very high load capacity of a steel plate bonded between ribbed and vibration pads Part No. HIMOAVMP11818 HIMOAVMP11212 HIMOAVMP10808 HIMOAVMP341818 HIMOAVMP341212 HIMOAVMP340808 HIMOAVMP340606 HIMOAVMP340404 HIMOAVMP340303 L 450 mm 300 mm 200 mm 450 mm 300 mm 200 mm 150 mm 100 mm 75 mm B s Rec. Load (mm) (mm) (N) 450 300 200 450 300 200 150 100 75 25 25 25 20 20 20 20 20 20 22,000 18,000 15,000 22,000 18,000 15,000 12,500 7,500 6,000 Fa,z (N) 33,000 27,000 22,500 33,000 27,000 22,500 18,750 11,250 9,000 203 Q 05 355 EN-DUB 03/2016 Q Anti Vibration Ribbed Multi Layer Pad Features and benefits ■ Ribbed Multi Layer Pads are constructed of two layers of thick ribbed pads encasing one 1.5 mm thickness steel plate in the center Part No. HIMOAVMLP1380606 HIMOAVMLP1380404 L 152 mm 102 mm alternate rib design with the ribs below and above joined at right angles to each other to eliminate skidding ■ diagonal ribs help to distribute load evenly ■ B s Deflection Rec. Load (mm) (mm) (mm) (N) 152 102 35 35 4.5 4.5 6,300 2,800 Fa,z (N) 9,000 4,000 204 EN-DUB 03/2016 Q 05 360 Anti Vibration Q Square Cell Multi Layer Pad Features and benefits ■ ■ due to suction pockets formed by the Square Cell Multi Layer Pads are constructed of three layers of square square cell design the pad offers better cell rubber sheets with two steel plates grip on the floor surface ■ higher load capacity than Ribbed Multi of 1.5 mm thickness Layer Pad Part No. HIMOAVSCP1380606 HIMOAVSCP1380404 L 152 mm 102 mm B s Deflection Rec. Load (mm) (mm) (mm) (N) 152 102 35 35 4.5 4.5 7,900 3,500 Fa,z (N) 10,000 4,500 205 Q 05 365 EN-DUB 03/2016
