GE
Security
EST Fire & Life Safety
Notification Appliances
Overview
Standard Features
116DEXSTC-FJ hazardous location strobes are in-rush current
limited life safety signaling appliances designed for installation in
hazardous environments. Rigid specifications and state-of-the-art
technology provide for high visual output and low maintenance.
• UL 1971 listed and ADA compliant for the hearing impaired
When pendant, wall or ceiling mounted, the 116DEXSTC-FJ meets
or exceeds the requirements of UL 1971 Signaling Appliance for the
Hearing Impaired. Stanchion mount models are UL 1638 Listed for
private mode emergency signaling. All models are CSFM Listed.
• Stanchion mount available for private mode signaling
The 116DEXSTC-FJ is intended for indoor use in UL listed compatible
fire alarm systems and other applications requiring electrical supervision of signaling circuit field wiring. Its strobe flashes a 360-degree
beam of light approximately 65 times per minute with a UL 1971
60 cd wall and ceiling light output. In Canada, the 116DEXSTC-FJ is
listed to ULC-S526-02 Visible Signal Device for Fire Alarm Systems,
suitable for indoor and outdoor applications.
• 65 flashes per minute
When assembled with an available mounting option, the
116DEXSTC-FJ is UL Listed for use in Class I, Division 1, Groups C and
D, Class I, Division 2, Groups A, B, C and D, Class II Division 1, Group
E, F and G, Class II, Division 2, Group F and G, and Class III Division
1 and 2 hazardous locations. This strobe is UL and cUL Listed as a
Type 3R and 4X enclosure.
Hazardous
Location Strobes
116DEXSTC-FJ
• Approved for fire alarm applications
• Bracket, ceiling or pendant mount
• Diode polarized for use in electronically supervised circuits
• High impact glass dome
• Factory sealed - no external seals required
• Quick connect - threads onto mounting module for easy installation
• Shock absorbing receptacle
• Easy to assemble and relamp
• Epoxy powder coat for corrosion resistance
• ULC-S526-02 listed for indoor and outdoor applications
Wall
Mount
Pendant
Mount
Stanchion
mount option
also available.
Ceiling
Mount
360-degree field of view.
Data Sheet 85001-0586 Issue 1
Not to be used for installation purposes. Page of 6
7 1/4"
7 1/4"
Application
Assembly
116DEXSTC-FJ hazardous location strobes are designed for use in
compatible GE Security fire alarm systems and other applications
requiring electrical supervision of signaling circuit field wiring.
116DEXSTC-FJ signals come pre-assembled, but come apart easily
for cleaning and relamping.
These strobes are suitable for many locations including mines, granaries, flour mills,
tankers, refineries, laboratories and other applica12 9/16"
tions where environmental
116DEXSTC-FJ
9 7/16" hazards may be present.
6 3/4"
strobes are particularly well-suited 1"in areas of high noise levels
4"
where standard bells or horns are not satisfactory.
They are suitable
for indoor or outdoor applications, however, the UL 1971 rating is
for indoor applications only.
4"
Set
Screw
13 1/4"
1 1/4"
Set
Screw
12 3/4"
Strobe13Tube
1/2"
When pendant, wall, or ceiling mounted, 116DEXSTC-FJ strobes
are ULC-S526-02 listed for indoor and outdoor applications and UL
16 1/16"
5/16"
1971 Listed (ADA compliant) for indoor visual signaling applications
16 13/16"
in non-sleeping areas. Stanchion mounted strobes are UL 1638
listed for private mode emergency
Set Screws signaling only. Stanchion mounting is not ULC-S526-02 listed as a visible signal device for fire alarm
systems.
1 1/4"
Conduit
Globe & Guard
Assembly
25°
Wiring
KEY:
Light symbol -
(-)
(+)
White
From Power Source
or
Previous Signaling Device
(+)
White
Series
116DEX
(+)
White
Wire nut symbol -
(+)
White
End-of-Line Resistor,
when required with
supervised system
Series
116DEX
Black
(-)
Black
(-)
Black
(-)
Black
(-)
(+)
For non-fire alarm use, i.e. without field wire supervision, installer can tie the two white leads together
and tie the two black leads together
Notes:
1.
DC Polarity of circuit shown in supervisory state (signal inactive). Circuit polarity to reverse to activate signal
2.
Electrical supervision requires wire run to be broken at each device.
3.
Device for constant input voltage. Do not connect to “coded” or pulsating voltage.
4.
For non-fire alarm use, i.e.: without field wire supervision, the installer can tie the two white leads together and tie the two black leads together.
Hazardous Location Listings
Ambient
Temperature
40 °C
55 °C
66 °C
Supply Wire
Temperature Marking
75 °C
90 °C
105 °C
Operating Temperature
Class I, Div. 2
Class I, Div. 1 & 2
Groups A, B
Groups C, D
T2D (215 °C)
T6 (85 °C)
T2C (230 °C)
T6 (85 °C)
T2C (230 °C)
T6(85 °C)
Class II, Div. 1
Groups E, F, G, & Class III
T4A (120 °C)
T4 (135 °C)
T3C (160 °C)
Class II, Div. 2
Groups F, G, & Class III
T4A (120 °C)
T4 (135 °C)
T3C (160 °C)
Data Sheet 85001-0586 Issue 1
Not to be used for installation purposes. Page of 6
Mounting
Thanks to its modular design, the
116DEXSTC-FJ configures for pendant,
ceiling, wall, or stanchion mounting. See
the ordering information table for available
mounting modules.
STANCHION 116EX-S
PENDANT 116EX-P
3/4" CONDUIT
ENTRY
CEILING 116EX-C
3/4" CONDUIT
ENTRIES
116EX-C (WALL MOUNTED)
3/4" CONDUIT
ENTRIES
WALL 116EX-B
3" HUB
Note: Stanchion mounting option is not listed to
UL 1971 or ULC-S526-02.
116 SERIES HOUSING AND GLOBE
ASSEMBLY WITH GUARD
1 1/4"CONDUIT
ENTRY
6 3/4"
Set Screw(s)
4"
4"
12"
5/16"
12 3/4"
Set
Screw
1"
13"
13 3/4"
7 1/4"
7 1/4"
Ceiling Mount
Pendant Mount
Set
Screw
13 1/4"
12 9/16"
9 7/16"
6 3/4"
1"
1 1/4"
4"
Set
Screw
4"
16 1/16"
12 3/4"
13 1/2"
5/16"
16 13/16"
1 1/4"
Conduit
Set Screws
25°
Wall Mount
Stancion Mount
(for private mode signaling,
not listed to UL UXWC and ULC-S526-02)
KEY:
Light symbol -
(-)
(+)
White
From Power Source
or
Series
116DEX
(+)
White
(+)
White
Series
116DEX
(+)
White
Data Sheet 85001-0586 Issue 1
Not to be used for installation purposes. Page of 6
Wire nut symbol -
End-of-Line Resistor,
when required with
Light Output
WALL
BRACKET
MOUNTING
ANGLE
(DEGREES)
zero
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
Compound
45
Effective Candela Light Output for Wall Bracket Mount
Vertical Plane
(Zero degree angle at side of globe)
UL1971 REQUIRED
DISPERSION AS % OF CD
RATING
VERTICAL
HORIZONTAL
PLANE
PLANE
100%
100%
90%
90%
90%
90%
90%
90%
90%
90%
90%
90%
90%
75%
65%
75%
46%
75%
34%
75%
27%
55%
22%
45%
18%
40%
16%
35%
15%
35%
13%
30%
12%
30%
12%
25%
12%
25%
-90
-85
130
-80
-75
-70
-65
120
-60
110
-55
-50
100
-45
90
-40
80
TYPICAL CD
70
-35
-30
UL REQUIRED CD
FOR 110 RATING
60
-25
50
-20
40
-15
30
-10
20
24%
-5
10
0 degrees
0
5
10
15
20
25
30
35
40
45
50
55
60
65
85
UL 1971 Hearing Impaired: 60 cd wall
145
135
110
140
155
120
150
165
160
175
170
180
170
165
160
155
150
130
135
140
140
130
130
100
UL REQUIRED CD
FOR 110 RATING
110
60
110
125
TYPICAL CD
70
120
80
115
115
120
125
90
50
105
105
40
100
100
30
90
0
80
75
70
65
60
55
50
45
40
35
30
25
20
15
10
5
15
10
5
degrees 0
UL 1971 Hearing Impaired: 60 cd ceiling
20
25
30
35
40
45
50
55
60
65
70
75
80
85
10
95
20
95
100%
90%
90%
90%
90%
90%
75%
75%
75%
75%
55%
45%
40%
35%
35%
30%
30%
25%
25%
24%
145
Effective Candela Light Output for Ceiling Mount
X & Y Planes
(Zero degree angle at bottom of of globe)
UL1971
REQUIRED
X & Y PLANE
DISPERSION
AS % OF CD
RATING
85
ANGLE
(DEGREES)
0
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
Compound 45
70
90
90
CEILING
MOUNTING
80
75
Data Sheet 85001-0586 Issue 1
Not to be used for installation purposes. Page of 6
Specifications
Mounting
Pendant, ceiling, wall, or stanchion
UL 1971(indoor) and ULC-S526-02 (indoor &
Rated strobe intensity
outoor): 60 cd
Flash Rate
65 fps
Agency Listings
UL, ULC, CSFM
UL Listed for Class I, Division 1 Groups C & D,
UL Listed Hazardous
Division 2, Groups A, B, C & D;
Classifications
Class II, Division 1, Groups E, F & G, Division 2,
Groups F & G, and Class III Divisions 1 & 2
ADA Compliance
UL 1971 listed signaling appliance for the
(pendant, ceiling, and
hearing impaired. Indoor, non-sleeping areas
wall applications*)
only.
NEMA Ratings
Type 3R, Type 4X, UL/ULC listed
Voltage Range
16 - 33 Vdc
0.774 @ 24 Vdc (regulated) 1.140 @ 24 VFWR
Operating Current (RMS)
(regulated)
UL: -31 to 150° F (-35° C to 65° C)
Operating Temperature
ULC: -40 to 150° F ( -40° C to 66° C)
Lens Color
Clear polycarbonate
Strobe Type
Xenon – clear/nominal white flash
Finish
Gray powder coat epoxy
Weight
18 lbs (8.2 kg)
* Stanchion mounted 116DEXSTC-FJ strobes are UL 1638 listed for private
mode signaling. They are not listed to UL 1971 or ULC-S526-02.
Ordering Information
Model
116DEXSTC-FJ
116EX-B
116EX-C
116EX-P
116EX-S
116-GRD
116-GLOBE
92 -ST
Description
Ship Wt.
Explosionproof Strobe, Diode Polarized
18 lbs 8.2 kg
Wall bracket mounting elbow
Ceiling/wall mounting module
Pendant mounting module - ¾” (19 mm) NPT
Stanchion mounting module - 1-1/4” (25 mm) NPT
Lens Guard
Replacement Globe
Replacement Strobe Tube
Data Sheet 85001-0586 Issue 1
Not to be used for installation purposes. Page of 6
GE
Security
U.S.
T 888-378-2329
F 866-503-3996
Canada
T 519 376 2430
F 519 376 7258
Asia
T 852 2907 8108
F 852 2142 5063
Australia
T 61 3 9259 4700
F 61 3 9259 4799
Europe
T 32 2 725 11 20
F 32 2 721 86 13
Latin America
T 305 593 4301
F 305 593 4300
www.gesecurity.com
© 2006 General Electric Company
All Rights Reserved
Data Sheet 85001-0586 Issue 1
Not to be used for installation purposes. Page of 6