DOWNLIGHT
®
BeveLED2.0
3021
*
1" REGRESS ALZAK
1" REGRESS
2-1/4" REGRESS ALZAK
BeveLED 2.0 Recessed Downlight - It’s a Downlight, Adjustable and Wall Wash - all in one housing - interchangeable anytime. Delivering up to
2000 lumens at 33W (60LPW), 1500 lumens at 24W (61LPW) and 1000 lumens at 16W (72LPW) the BeveLED 2.0 provides maximum delivered lumens
and optical performance through the optimization of thermal, optical and LED science in the smallest possible aperture.
PROJECT INFORMATION
DELIVERED PERFORMANCE
TYPE
PROJECT
12 Watts
BeveLED 2.0
DOWNLIGHT
DATE
Lumens per Watt
Source Lumens
Delivered Lumens
NOTES
80+
CRI
72
1012
875
90+
HIGH
CRI
59
837
725
16 Watts
80+
CRI
72
1425
1200
90+
HIGH
CRI
59
1165
990
24 Watts
80+
CRI
61
1725
1490
90+
HIGH
CRI
51
1410
1230
33 Watts
80+
CRI
60
2400
1960
90+
HIGH
CRI
50
1960
1620
Performance based on 1" regress trim with solite lens. Consult factory for 2-1/2" regress trim
HOW TO SPECIFY
Trim
–
Bevel Style
–
–
1" REGRESS
3021
Downlight B1 - Die Cast Bevel
AB1 - Black Alzak Bevel
3021W
w/ painted flange
Use in
Wet
AC1 - Clear Matte
Location
Alzak Bevel
w/ painted flange
3021TZ
Tech
2-1/2" REGRESS
Zone
Compatible AB2 - Black Alzak Bevel
w/ painted flange
Trim
for use w/ AC2 - Clear Matte
NCSM
Alzak Bevel
Housing
w/ painted flange
Only
3021EML
Use with
EML
Emergency
on
1" regress
only
– Optional – Flange Finish –
Trim Lens
3021EMLW
Wet Location
Use with EMLW
Emergency
on
1" regress
only
Not required for NCSM
housing with EML Option
®
USAI
–
Wattage
–
Options
120V CB27 - 27” C-Channel Bars
30 - 30° NC - New
50 - 50° Construction 277V CB52 - 52” C-Channel Bars
Note:
DIML2 - 0-10V Low Voltage.
80 - 80° SP - New
Solite is
Construction
100%-15% Dimming Driver
standard
Shallow
DIML3- Lutron Hi-Lume A-Series
Plenum
2 wire Forward Phase (with neutral)
NCSM - New
100%-1% Dimming Driver. 120V Only
High
Construction
DIML4 - Lutron Hi-Lume A-Series
CRI 90+
CP 3 Wire or ECO System
27KH - 2700K
100%-1% Dimming Driver
Chicago
Plenum
30KH - 3000K
DIML5 - ELV 2 wire control. Reverse
AB2 & AC2 not available
phase 100%-15% Dimming Driver.
IC with NCSM housing
Not available for NCSM and SP housings
Insulated /
120V Only.
Note: Alzak trims not
Airtight
for use in wet location
DIML6A -eldoLED SOLOdrive 561/S
0-10V control 100%-0% dimming driver
For Lutron Controls. Not for 33W.
Options (continued)
See dimming compatibility guide.
DIML6B -eldoLED SOLOdrive 561/S
EML - Emergency lighting battery pack w/ integral test switch. (Serviceable through
0-10V control 100%-0% dimming driver
aperture). Not for use with wet listed. Bodine BSL26C Emergency driver with max.
For Non-Lutron Controls. Not for 33W.
output of 200mA for 90 minutes delivering approx 275-300 lumens. *Note: NCSM utilizes
See dimming compatibility guide.
remote test switch & requires above ceiling access for service.
DIML7 -eldoLED SOLOdrive 560/S DALI
EMLW - Wet location emergency lighting battery pack w/ remote test switch.
control 100%-0% dimming driver.
(Serviceable through aperture). Bodine BSL26C Emergency driver with max. output of
Not for 33W.
200mA for 90 minutes delivering approx 275-300 lumens. *Note: NCSM housing utilizes
remote test switch & requires above ceiling access for service.
DIML8 -eldoLED POWERdrive 562/S
DMX/RDM control 100%-0% dimming
TZ - TechZone ceiling compatible (NCSM only).
driver. Not available for NCSM housings
Not for 33W.
F - Frosted
www.usailighting.com
info@usailighting.com
10 - White
13 - Statuary
Bronze
21 - Black
28 - Metalized
Grey
RAL - Special
Color
LRTD4-9012-C2
(12W LED)
LRTD4-9016-C2
(16W LED)
LRTD4-9024-C2
(24W LED)
LRTD4-9033-C2
(33W LED)
Color – Reflector – Housing – Voltage –
Temperature
Type
–
–
–
–
–
–
1126 River Road
New Windsor, NY 12553
STANDARD
CRI 80+
27KS - 2700K
30KS - 3000K
35KS - 3500K
40KS - 4000K
T 845–565–8500
F 845–561–1130
© 2012. USAI, LLC.
All rights reserved.
All designs protected by copyright.
Revised 9/17/2013
DOWNLIGHT
®
BeveLED2.0
3021
*
LIGHT ENGINE
Proprietary blend of high power white LEDs tightly binned for
fixture-to-fixture color consistency ± 50K within a 2-Step
MacAdam Ellipse. Field replaceable through the aperture.
MATERIALS:
Trim: Die cast aluminum retained by two mounting clips.
Housing: Fabricated of 20 ga. galvanized steel with thru
wire J-box, 4 in 4 out at min. 90°C, #12 AWG thru branch circuit
wiring. Housing and trim supplied as one complete unit.
Trim Lens: Solite. Frosted is optionally available.
Reflector: Interchangeable precision injection molded specular
polycarbonate reflector maximized for 30°, 50° or 80° beam
distribution.
CRI OPTIONS: Standard: 80+ CRI. High: 90+ CRI.
RATED LIFE: Based on IESNA LM80-2008
50,000 hours at 70% lumen maintenance (L70).
LISTINGS:
Dry/Damp/Wet. *(Wet available for die cast
trims only). IBEW union made.
HEATSINK: Proprietary high performance aluminum
die cast heatsink for maximum LED life.
NOTES:
• Housing included with trim.
• Maximum ceiling thickness:
NC/SP/IC/CP: 1-1/4" inch. NCSM: 2-3/16"
Consult factory for other ceiling
conditions.
• Fixture should be installed in applications
where ambient temperatures do not
exceed 40°C during normal operation.
• Not for use in corrosive environment.
• Use of pressure washer voids warranty.
• 5 year warranty
DRIVER: Field Replaceable
Solid state electronic. Constant current.
High power factor. Specify 120V or 277V. Driver
complies with IEEE C62.41 surge protection.
DIMMING: (optional)
Multiple dimming drivers available. See
compatibility chart attached. Warm Glow Dimming
option available. See 3023 spec sheet.
MOUNTING:
Butterfly brackets and adjustable nailer bars with
integral nails provided. Nailer bars are extendible
from 14" to 24" centers.
PHOTOMETRICS:
Consult factory or website for IES files.
Tested in accordance with
IESNA LM79-2008.
CEILING CUT OUT: 51/16" Ø
TRIM INFORMATION
1" Regress w/ EM
1" Regress
1" Regress - TechZone Compatible
1" Regress
1" Regress
Bevel Finish
Color area
(B1, AB1, AC1)
Bevel Finish
Color area
(B1, AB1, AC1)
Flange Finish
Color area
(10, 13, 21, 28 RAL)
31⁄2" Ø
41⁄2" Ø
Outer Trim 51⁄2" Ø
Hole in lens for EM indicator light.
2-1/2" Regress
21⁄2" Regress
Flange Finish
Color area
(10, 13, 21, 28 RAL)
31⁄2" Ø
31⁄2" Ø
41⁄2" Ø
Outer Trim 51⁄2" Ø
41⁄2" Ø
Outer Trim 513⁄16" Ø
Bevel Finish
Color area
(B1, AB1, AC1)
Flange Finish
Color area
(10, 13, 21, 28 RAL)
21⁄2" Ø
41⁄2" Ø
Outer Trim 51⁄2" Ø
HOUSING INFORMATION
New Construction
Universal Style Housing - NC
New Construction
Shallow Plenum - SP
For Downlight Only
Chicago Plenum (33W) - CP
IC / Airtight (33W) - IC
Chicago Plenum (12W, 16W & 24W) - CP
IC / Airtight (12W, 16W & 24W) - IC
67/8"
81/2"
67/8"
5"
1 /4"
1
11/4"
7"
11/4"
7"
13"
13"
13"
185/8" (Plan View)
185/8" (Plan View)
185/8" (Plan View)
22 /8" (Plan View)
22 /8" (Plan View)
22 /8" (Plan View)
1
11/4"
7"
7"
1
13"
185/8" (Plan View)
221/8" (Plan View)
1
83/8"
New Construction - NCSM For Downlight Only
83/8"
53/4"
43/4"
Shown
with
EM option
81/4"
1 - 23/16"
19" (Plan View)
19" (Plan View)
22(Plan View)
®
USAI
www.usailighting.com
info@usailighting.com
1126 River Road
New Windsor, NY 12553
22(Plan View)
T 845–565–8500
F 845–561–1130
© 2012. USAI, LLC.
All rights reserved.
All designs protected by copyright.
Revised 9/17/2013
DIMMING DRIVER COMPATIBILITY
SELECTION GUIDE
DIML4, DIML5, DIML6A & DIML6B
®
BeveLED2.0
DIMMING DRIVER WIRING SCHEMES:
DIML4 LED: Lutron Hi-Lume A-Series LED Driver with Eco System Control / LED Dimming Driver Wiring (Dims down to 1%)
Compatible Lutron Dimmers / Test Results
NOTE: Consult dimmer manufacturer for detailed installation information.
Product
Part Number
1-59
1-29
1-59
1-29
1-29
1-29
1-29
1-29
1-22
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
1-61
1-46
1-61
1-46
1-46
1-46
1-46
-
100% - 1%
100% - 1%
1-22
1-29
1-22
1-22
1-59
1-59
1-46
1-46
1-46
1-46
1-123
-
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% – 1%
100% - 1%
100% - 1%
64 per
EcoSystem
32 per module
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
BLACK
ORANGE
WHITE
GREEN
SWITCHED HOT
DIMMED HOT VV+
NEU
GND
E2
E1
BLACK
RED
DRIVER
(BACK SIDE OF
MTG PLATE)
ECO-SYS BUS
CAP WIRES
Wire Diagram for ECO System Digital Control
CAP LEAD
LED
ECO SYSTEM
Control
(By Others)
BLACK
ORANGE
WHITE
GREEN
SWITCHED HOT
DIMMED HOT VV+
NEU
GND
E2
E1
DRIVER
(BACK SIDE OF
MTG PLATE)
PURPLE
1-46
1-46
LED
FL
Control
(By Others)
PURPLE/GREY
1-22
1-22
Wire Diagram for 3-Wire FL Control (no Eco System Control)
PURPLE
NTF-10,
NTF-103P, NTF-10-277
NTF-103P-277
NF-10
NF-103P, NF-10-277
NF-103P-277
VF-10
SF-10P, SF-103P
SF-12P-277,SF-12P-277-3
DVF-103, DVSCF-103P
DVF-103P-277,DVSCF-103P-277
AYF-103P
AYF-103P-277
VTF-6AM
MAF-6AM, MAF-6AM-277, MSCF6AM, MCSF-6AM-277
Maestro Wireless
MRF2-F6AN-DV
Spacer System
SPSF-6A,SPSF-6A-277, SPSF6AM, SPSF-6AM-277
Lyneo LX
LXF-103PL
Lyneo LX
LXF-103PL-277
Radio RA 2
RRD-F6AN-DV
HomeWorks QS
HQRD-F6AN-DV
Interfaces (1)
PHPM-3F -120, PHPM-3F-DV
NGRX-FDBI-16A
Energi Savr Node
CS-1L-WM, CS-2L-WM,
with EcoSystem
CS-1LCM, CS-2L-CM
Grafik Eye QS
QS with EcoSystem
with ECO System
Quantum
Quantum
PowerPak dim
RMJ-ECO32-DV-B
module ECOSystem
Measured
Light Output
Range
PURPLE/GREY
NovaT
NovaT
NovaT
Nova
Nova
Nova
Vareo
Skylark
Skylark
Diva
Diva
Ariadni
Ariadni
Vierti
Maestro
Fixtures
Per Dimmer
120V
277V
ECO-SYS BUS
Compatible ETC Dimming Cabinets / Test Results
Approved for use with:
ETC Sensor+ Cabinet with D20F dimming module
Measured light output 100% - 1%
ETC Unison DRd Cabinet with D20F dimming module
NOTE: Additional dim configuration required for optimum performance.
Measured light output 100% - 1%
(1) For use with 3 Wire controls or Commercial Systems, RA Systems or Home Systems applications.
*Contact Lutron tech support for deganging rules when using wallbox controls on the
Hi-lume A-Series LED Driver.
**Fixtures per Dimmer value assumes a 40W fixture. Number of fixtures may be higher if wattage is less than 40W.
DIML5 LED: ELV Reversr Phase 2 wire 100%-15% Dimming Driver (16W only)
Product
Part Number
Fixtures
Per Dimmer
120V Only
Diva
Maestro
NovaT
Sunrise Preset
DVELV-300P
MAELV-600
NTELV
ZP260QE
1-8
1-8
1-8
1-8
Measured
Light Output
Range
Part Number
Diva
DVTV/NFTV/N TFTV with PP-20
Energi Savr Node
QSN-4T16-S
Panels
TVM2 Module
Interfaces
GRX-TVI w GRX3503
Lutron
Electronics
GraphicEye-GRX-TVI w GRX3503
Energy Savr Node-QSN-4T16-S
TVM2 Module
®
USAI
www.usailighting.com
info@usailighting.com
LED
BLACK
WHITE
SWITCHED HOT VNEU
10% - 100%
10% - 100%
10% - 100%
10% - 100%
DIML6A LED: eldoLED SOLOdrive 561/S 0-10V control 100%-0%
dimming driver For Lutron Controls.
Product
2 Wire
Reverse Phase
ELV Dimmer
(By Others)
Fixtures
Per Dimmer
120V Only
Measured
Dimming
Range
1-4
1-5
1
1-4
1% - 99%
1% - 100%
1% - 99%
1% - 100%
1126 River Road
New Windsor, NY 12553
V+
BLACK
RED
DRIVER
(BACK SIDE OF
MTG PLATE)
DIML6B LED: eldoLED SOLOdrive 561/S 0-10V control 100%-0%
dimming driver For Non-Lutron Controls.
Product
Bush-Jaeger
Jung
Leviton Lighting
Controls
Lightolier Controls
Merten
Pass & Seymour
The Wall Stopper
T 845–565–8500
F 845–561–1130
Part Number
2112U-101
240-10
IllumaTech-IP710-DLX
ZP600FAM120
5729
CD4FB -W
DCLV1
© 2012. USAI, LLC.
All rights reserved.
All designs protected by copyright.
Revised 9/17/2013
DIMMING DRIVER COMPATIBILITY
SELECTION GUIDE
DIML2 & DIML3
®
BeveLED2.0
DIMMING DRIVER WIRING SCHEMES:
DIML2 LED: 0-10V FL Dimming Driver Wiring
(Dims down to 15%)
Levition and Lightolier Driver Wiring
NOTE: Consult dimmer manufacturer for detailed installation information.
For use with 0-10V fluorescent type controls.
Use only with approved vendor models:
Lutron: DIVA DVTV-XX
XX=Color
0-10V
Dimmer
(By Others)
Leviton: IP710-DLX
Lightolier: V2000FAMU
0-10V
Dimmer
(By Others)
LED
VIOLET
GREY
DIMMING
DRIVER
VIOLET
GREY
BLACK
DIMMING
DRIVER
-
GROUND
WHITE
0-10V VIOLET
CCT GREY
0-10V VIOLET
CCT GREY
RED
+
RED
BLACK
LED
+
RED
BLACK
-
GROUND
WHITE
BLACK
BUILDING POWER WIRING
NOTE GROUND WIRE
BUILDING POWER WIRING
NOTE GROUND WIRE
Compatible Crestron Dimming System: NOTE:
Consult dimmer manufacturer for detailed installation information.
Creston
Min # of
Creston
Model
Compatible
Fixtures
Min-Max %
Required (1)
Limits (2)
CLS-EXP-DIMFLV
DIN-4DIMFLV4
DIN-A08
GLX-DIMFLV8
GLXP-DIMFLV8
Y
Y
Y
Y
Y
1
1
1
1
1
0-100%
0-100%
0-100%
0-100%
0-100%
Measured
Light Output
(3)
15-100%
15-100%
15-100%
15-100%
15-100%
(1) Operating dimmers with less than minimum required fixtures may cause flicker.
The Max number of fixtures is limited by dimmer rating unless otherwise noted.
(2) % Level refers to the Crestron Control System Intensity.
Operating the dimmer below the Min % level may cause flicker.
Operating the dimmer above the Max % may show no additional brightness.
(3) % Level of light output from fixture when connected directly to power source
(4) Dimmer requires a direct connection to neutral unless otherwise noted.
DIML3 LED: Lutron Hi-Lume A-Series 2 Wire Fwd Phase (with neutral) / LED Dimming Driver Wiring (Dims down to 1%) 120V only.
Compatible Lutron Dimmers / Test Results
NOTE: Consult dimmer manufacturer for detailed installation information.
Product
Part Number
NovaT
Maestro Wireless
RadioRA 2 1000W
RadioRA 2 Adaptive dimmer
RadioRA 600W
RadioRA 1000W
HomeWorks QS 600W
HomeWorks QS 1000W
HomeWorks QS Adaptive dimmer
HomeWorks QS WPM
HomeWorks 600W dimmer
HomeWorks 1000W dimmer
HomeWorks WPM
GRAFIK Eye QS
GRAFIK Eye 3000
RPM-4U Module
(LCP, HomeWorks,
GRAFIK Systems, Quantum)
RPM-4A Module
(LCP, HomeWorks,
GRAFIK Systems, Quantum)
GP Panels
(LCP, HomeWorks,
GRAFIK Systems, Quantum)
Stanza
Fixtures Measured
Per Dimmer Light Output
120V Only* Range
NTLV-600-CPN0199
MRF2-6ND-120
RRD-10ND
RRD-6NA
RA-6ND
RA-10ND
HQRD-6ND
HQRD-10ND
HQRD-6NA
HQRJ-WPM-6D-120
1–8
1–8
1 – 13
1–8
1–8
1 – 13
1–8
1 – 13
1–8
1 – 11
(per output)
HRD-6ND
1–8
HWD-10ND, HRD-10ND
1–8
HWI-WPM-6D-120
1 – 10
(per output)
QSGR-, QSGRJ1 – 10
(per output)
GRX-3100, GRX-3500
1 – 10
(per output)
HW-RPM-4U-120,
1 – 26
LP-RPM-4U-120
(per output)
HW-RPM-4A-120,
LP-RPM-4A-120
1–8
(per output)
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
Compatible ETC Dimming Cabinets / Test Results
Approved for use with:
ETC Sensor + Cabinet with D20 dimming module
Measured light output 100% - 1%
ETC Unison DRd Cabinet with D20 dimming module
NOTE: Additional dim configuration required for optimum performance.
Measured light output 100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
Wire Diagram for 2-Wire Control
100% - 1%
100% - 1%
100% - 1%
Forward Phase
with Neutral
2-Wire Dimmer
(By Others)
LED
BLACK
SWITCHED HOT
WHITE
GREEN
NEU
GND
VV+
BLACK
RED
100% - 1%
DRIVER
(BACK SIDE OF
MTG PLATE)
Various
1 – 27
100% - 1%
SZ-6ND
1–8
100% - 1%
* Fixtures per Dimmer value assumes a 40W fixture. Number of fixtures may be higher
if wattage is less than 40W.
NOTE: Contact Lutron tech support for deganging rules when using wallbox controls on the
Hi-lume A-Series LED Driver.
®
USAI
www.usailighting.com
info@usailighting.com
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
© 2012. USAI, LLC.
All rights reserved.
All designs protected by copyright.
Revised 9/17/2013