Turnbuckles
Applications
Turnbuckles are used for rigging or tensioning wires, ropes, rods etc. They are designed for in-line rigging, tensioning
or lashing.
Range
Van Beest offers a wide range of turnbuckles:
• Load rated Green Pin® turnbuckles;
• Open body rigging screws generally to DIN 1480;
• Rigging screws with welding ends;
• Closed body rigging screws;
• Special turnbuckles for lashing (hamburgers).
Design
Green Pin® turnbuckles are manufactured to ASTM F1145-92, formerly U.S. Fed. Spec. FF-T-791.
Green Pin® turnbuckles are drop forged.
Green Pin® turnbuckles are available with following end fittings: eye/eye, hook/hook, hook/eye, jaw/jaw and jaw/eye.
All fittings are interchangeable. Locking nuts are supplied with all sizes.
Green Pin® turnbuckles are generally marked with:
- Working Load Limit
n e.g. 2.36 t
- manufacturer’s symbol
n e.g. GP
3
- thread diameter
ne.g. /4”
- traceability code
n e.g. A1
- thread
n L (lefthanded) and R (righthanded)
Rigging screws generally to DIN 1480 are available with welding ends and in hook/eye, eye/eye, hook/hook and
jaw/jaw combinations.
Closed body rigging screws are available in jaw/jaw, jaw/eye and eye/eye combinations.
Finish
6
Load rated Green Pin® turnbuckles and closed body rigging screws are hot dipped galvanized. Rigging screws to
DIN 1480 are electro-galvanized. Lashing turnbuckles are self coloured.
7
Certification
8
Specific details of certificate availability can be found on each product page.
Please verify your certification requirements with Van Beest at time of order.
9
Instructions for use
10
Turnbuckles must be used for in-line applications only.
Special attention should be paid to prevent overloading.
During tensioning, avoid forces on the turnbuckle that may lead to deformation. Should a turnbuckle start to
deform, the tension should be decreased immediately and any deformed parts should be replaced. Should extreme
circumstances or shock loading, possibly occur during use, this must be taken into account when selecting the
correct products to be used for the application.
11
12
13
For the rigging of wires, ropes, rods etc., Green Pin® turnbuckles are recommended to be used.
The WLL should be applied in in-line lifting only and overloading is not permitted.
Nor should side loads be applied, as the products have not been designed for this purpose.
14
Open body rigging screws are used for tensioning wires and ropes for less demanding applications (for example
rope railings).
15
Turnbuckles must be regularly inspected in accordance with the safety standards given in the country of use. This
is required because the products in use may be affected by wear, misuse, overloading etc. which may lead to
deformation and alteration of the steel structure.
16
17
18
19
20
96
Turnbuckles
Safe use of turnbuckles
Turnbuckles should be inspected before use to ensure that:
• all markings are legible;
• the threads of the body and the end fittings are of the same type;
• the pin, nut, cotter pin, or any other locking system cannot vibrate out of position;
• the threads of the body and the end fittings are undamaged;
• the body and end fittings are not distorted or unduly worn;
• the body and end fittings are free from nicks, gouges and cracks.
Make sure that the end fittings are correctly screwed into the body. Always use the locking nuts provided to prevent
the turnbuckles from unscrewing.
Never replace an end fitting by anything other than one designed for the purpose, otherwise the turnbuckle may not
be suitable for the loads imposed.
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
97
Turnbuckles
Green Pin® turnbuckles Jaw - Jaw with cotter pin
generally to ASTM F1145-92
•
•
•
•
Material
Safety factor
Standard
: drop forged high tensile steel SAE 1035 or 1045
: MBL equals 5 x WLL
: generally to ASTM F1145-92
formerly U.S. Federal Specification FF-T-791b
: hot dipped galvanized
Finish
: 2.1 2.2 3.1
• Certification
G-6313
6
7
working diameter
load
thread
limit
a
t
inch
2.36
2.36
2.36
2.36
3.27
3.27
4.54
4.54
4.54
4.5
6.9
6.9
6.9
9.71
9.71
9.71
12.7
12.7
16.8
27.2
34
3/4
3/4
3/4
3/4
7/8
7/8
1
1
1
1
1 1/4
1 1/4
1 1/4
1 1/2
1 1/2
1 1/2
1 3/4
1 3/4
2
2 1/2
2 3/4
mm inch
:
take
up
length
open
position
c
inch
length
closed
position
d
inch
opening
jaw
length
inside
diameter
pin
thickness
jaw eye
diameter
jaw eye
weight
each
inch
length
closed
position
b
inch
e
inch
f
inch
g
inch
h
inch
i
inch
lbs
6
9
12
18
12
18
6
12
18
24
12
18
24
12
18
24
18
24
24
24
24
14 17/32
17 17/32
20  1/2
26 11/32
22  3/32
28  1/32
17  5/8
23  9/16
29 17/32
35  9/16
25  1/4
31  5/8
37  7/8
26  9/16
32  1/2
38 19/32
36 29/32
42  7/8
45  5/16
49 13/32
53  3/32
19  3/16
25  3/16
31  5/32
43  5/32
32 17/32
44  9/16
21 13/16
33 13/16
46
57  7/8
35 31/32
48 11/32
60 19/32
37  3/32
48 31/32
61  1/16
51 13/16
63 13/16
65 25/32
72  3/32
74  3/32
17  5/16
20  1/4
23  1/4
29  1/8
25  1/8
31  3/32
20 15/16
26  7/8
32  7/8
38 29/32
29  7/16
35 13/16
42  3/32
31  3/4
37  5/8
43  3/4
43
48 15/16
52 11/16
58  9/32
63  5/32
15/16
15/16
15/16
15/16
1  3/32
1  3/32
1  1/4
1  1/4
1  1/4
1  1/4
1  3/4
1  3/4
1  3/4
2  1/32
2  1/32
2  1/32
2 11/32
2 11/32
2  1/2
2 15/16
3  9/16
1 17/32
1 17/32
1 17/32
1 17/32
1 11/16
1 11/16
1 31/32
1 31/32
1 31/32
1 31/32
2 25/32
2 25/32
2 25/32
2 25/32
2 25/32
2 25/32
3  3/8
3  3/8
3 11/16
4  1/2
4  5/16
5/8
5/8
5/8
5/8
3/4
3/4
7/8
7/8
7/8
7/8
1 5/32
1 5/32
1 5/32
1 3/8
1 3/8
1 3/8
1 5/8
1 5/8
2
2 1/4
2 3/4
5/8
5/8
5/8
5/8
3/4
3/4
25/32
25/32
25/32
25/32
1  1/32
1  1/32
1  1/32
1  1/8
1  1/8
1  1/8
1  5/16
1  5/16
1 19/32
1  5/8
1  5/8
1  5/8
1  5/8
1  5/8
1  5/8
1 29/32
1 29/32
2  1/8
2  1/8
2  1/8
2  1/8
2 11/16
2 11/16
2 11/16
3  5/32
3  5/32
3  5/32
3  9/16
3  9/16
4  3/16
5  5/8
6  3/16
5.71
6.90
7.54
9.94
10.87
14.13
11.42
14.18
18.52
19.62
24.7
30.0
33.1
37.5
42.5
45.6
55.1
63.3
100.1
194.0
216.1
CAD
8
9
10
11
12
13
14
15
16
17
18
19
20
98
generally to ASTM F1145-92
•
•
•
•
Material
Safety factor
Standard
Finish
• Certification
working
load
limit
t
G-6313
2.36
2.36
2.36
2.36
3.27
3.27
4.54
4.54
4.54
4.5
6.9
6.9
6.9
9.71
9.71
9.71
12.7
12.7
16.8
27.2
34
: drop forged high tensile steel SAE 1035 or 1045
: MBL equals 5 x WLL
: generally to ASTM F1145-92
formerly U.S. Federal Specification FF-T-791b
: hot dipped galvanized
: 2.1 2.2 3.1
:
diameter
thread
take
up
a
inch
/4
3
/4
3
/4
3
/4
7
/8
7
/8
3
1
1
1
1
1 1/4
1 1/4
1 1/4
1 1/2
1 1/2
1 1/2
1 3/4
1 3/4
2
2 1/2
2 3/4
mm inch
length
open
position
c
mm
length
closed
position
d
mm
opening
jaw
length
inside
diameter
pin
thickness
jaw eye
diameter
jaw eye
inch
length
closed
position
b
mm
e
mm
f
mm
g
mm
h
mm
i
mm
kg
6
9
12
18
12
18
6
12
18
24
12
18
24
12
18
24
18
24
24
24
24
369
444
520
670
561
713
447
598
750
903
641
803
962
675
825
980
938
1089
1151
1255
1348
487
640
792
1096
826
1132
554
859
1168
1470
914
1228
1539
942
1244
1551
1316
1621
1671
1831
1882
439
514
590
740
638
790
532
683
835
988
748
910
1069
806
956
1111
1092
1243
1338
1480
1604
24
24
24
24
27
27
31
31
31
31
44
44
44
52
52
52
60
60
63
75
90
38
38
38
38
42
42
50
50
50
50
71
71
71
71
71
71
86
86
93
114
110
16
16
16
16
19
19
22
22
22
22
29
29
29
35
35
35
41
41
51
57
70
16
16
16
16
19
19
20
20
20
20
26
26
26
28
28
28
33
33
40
41
41
41
41
41
41
48
48
54
54
54
54
68
68
68
80
80
80
90
90
107
143
158
2.59
3.13
3.42
4.51
4.93
6.41
5.18
6.43
8.4
8.9
11.2
13.6
15
17
19.3
20.7
25
28.7
45.4
88
98
Turnbuckles
Green Pin® turnbuckles Jaw - Jaw with cotter pin
weight
each
CAD
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
99
Turnbuckles
Green Pin® turnbuckles Jaw - Jaw with safety bolt
generally to ASTM F1145-92
•
•
•
•
Material
Safety factor
Standard
Finish
• Certification
working
load
limit
t
G-6323
6
7
8
9
10
0.54
1
1
1
1.59
1.59
1.59
2.36
2.36
2.36
2.36
3.27
3.27
4.54
4.54
4.54
4.5
6.9
6.9
6.9
9.71
9.71
9.71
12.7
12.7
16.8
27.2
34
: drop forged high tensile steel SAE 1035 or 1045
: MBL equals 5 x WLL
: generally to ASTM F1145-92
formerly U.S. Federal Specification FF-T-791b
: hot dipped galvanized
: 2.1 2.2 3.1
:
diameter
thread
take
up
a
inch
/8
1
/2
1
/2
1
/2
5
/8
5
/8
5
/8
3
/4
3
/4
3
/4
3
/4
7
/8
7
/8
3
1
1
1
1
1 1/4
1 1/4
1 1/4
1 1/2
1 1/2
1 1/2
1 3/4
1 3/4
2
2 1/2
2 3/4
mm inch
length
open
position
c
inch
length
closed
position
d
inch
opening
jaw
length
inside
diameter
pin
thickness
jaw eye
diameter
jaw eye
weight
each
inch
length
closed
position
b
inch
e
inch
f
inch
g
inch
h
inch
i
inch
lbs
6
6
9
12
6
9
12
6
9
12
18
12
18
6
12
18
24
12
18
24
12
18
24
18
24
24
24
24
10  3/4
11 31/32
14 29/32
17 15/16
13  5/8
16 19/32
19  5/8
14 17/32
17 17/32
20  1/2
26 11/32
22  3/32
28  1/32
17  5/8
23  9/16
29 17/32
35  9/16
25  5/16
31 23/32
37 15/16
26  9/16
32  1/2
38 19/32
36 29/32
42  7/8
45 13/32
49 13/32
53  3/32
16  1/8
17  5/32
23  5/32
29  1/8
18  1/2
24  1/2
30  7/16
19  3/16
25  3/16
31  5/32
43  5/32
32 17/32
44  9/16
21 13/16
33 13/16
46
57  7/8
36  1/32
48  7/8
60 11/16
37  3/32
48 31/32
61  1/16
51 13/16
63 13/16
65  7/8
72  3/32
74  3/32
11 31/32
13 17/32
16  1/2
19  1/2
16
18 29/32
21 15/16
17  5/16
20  1/4
23  1/4
29  1/8
25  1/8
31  3/32
20 15/16
26  7/8
32  7/8
38 29/32
29  7/16
35 13/16
42  3/32
31  3/4
37  5/8
43  3/4
43
48 15/16
52 11/16
58  9/32
63  5/32
15/32
5/8
5/8
5/8
23/32
23/32
23/32
15/16
15/16
15/16
15/16
1  3/32
1  3/32
1  1/4
1  1/4
1  1/4
1  1/4
1  3/4
1  3/4
1  3/4
2  1/32
2  1/32
2  1/32
2 11/32
2 11/32
2  1/2
2 15/16
3  9/16
13/16
1  1/32
1  1/32
1  1/32
1  9/32
1  9/32
1  9/32
1 17/32
1 17/32
1 17/32
1 17/32
1 11/16
1 11/16
1 31/32
1 31/32
1 31/32
1 31/32
2 25/32
2 25/32
2 25/32
2 25/32
2 25/32
2 25/32
3  3/8
3  3/8
3 11/16
4  1/2
4  5/16
9/32
13/32
13/32
13/32
1/2
1/2
1/2
5/8
5/8
5/8
5/8
3/4
3/4
7/8
7/8
7/8
7/8
1  1/8
1  1/8
1  1/8
1  3/8
1  3/8
1  3/8
1  5/8
1  5/8
1 31/32
2  1/4
2  3/4
11/32
7/16
7/16
7/16
9/16
9/16
9/16
5/8
5/8
5/8
5/8
3/4
3/4
25/32
25/32
25/32
25/32
1  1/32
1  1/32
1  1/32
1  1/8
1  1/8
1  1/8
1  5/16
1  5/16
1 19/32
1  5/8
1  5/8
13/16
1
1
1
1  5/16
1  5/16
1  5/16
1  5/8
1  5/8
1  5/8
1  5/8
1 29/32
1 29/32
2  1/8
2  1/8
2  1/8
2  1/8
2 11/16
2 11/16
2 11/16
3  5/32
3  5/32
3  5/32
3  9/16
3  9/16
4  3/16
5  5/8
6  3/16
1.21
2.12
2.60
3.31
3.86
4.72
5.36
5.95
7.12
7.87
10.03
11.51
14.46
12.21
15.34
18.52
19.62
26.2
30
31.3
40.8
42.5
48.5
66.1
72.8
110
203
240
CAD
11
12
13
14
15
16
17
18
19
20
100
generally to ASTM F1145-92
•
•
•
•
Material
Safety factor
Standard
Finish
• Certification
working
load
limit
t
G-6323
0.54
1
1
1
1.59
1.59
1.59
2.36
2.36
2.36
2.36
3.27
3.27
4.54
4.54
4.54
4.5
6.9
6.9
6.9
9.71
9.71
9.71
12.7
12.7
16.8
27.2
34
: drop forged high tensile steel SAE 1035 or 1045
: MBL equals 5 x WLL
: generally to ASTM F1145-92
formerly U.S. Federal Specification FF-T-791b
: hot dipped galvanized
: 2.1 2.2 3.1
:
diameter
thread
take
up
a
inch
/8
1
/2
1
/2
1
/2
5
/8
5
/8
5
/8
3
/4
3
/4
3
/4
3
/4
7
/8
7
/8
3
1
1
1
1
1 1/4
1 1/4
1 1/4
1 1/2
1 1/2
1 1/2
1 3/4
1 3/4
2
2 1/2
2 3/4
mm inch
length
open
position
c
mm
length
closed
position
d
mm
opening
jaw
length
inside
diameter
pin
thickness
jaw eye
diameter
jaw eye
inch
length
closed
position
b
mm
e
mm
f
mm
g
mm
h
mm
i
mm
6
6
9
12
6
9
12
6
9
12
18
12
18
6
12
18
24
12
18
24
12
18
24
18
24
24
24
24
273
304
379
455
346
421
498
369
444
520
670
561
713
447
598
750
903
643
805
964
675
825
980
938
1089
1153
1255
1348
409
435
588
740
469
622
774
487
640
792
1096
826
1132
554
859
1168
1470
916
1230
1541
942
1244
1551
1316
1621
1673
1831
1882
304
343
418
494
406
480
557
439
514
590
740
638
790
532
683
835
988
748
910
1069
806
956
1111
1092
1243
1338
1480
1604
12
16
16
16
18
18
18
24
24
24
24
27
27
31
31
31
31
44
44
44
52
52
52
60
60
63
75
90
21
26
26
26
32
32
32
38
38
38
38
42
42
50
50
50
50
71
71
71
71
71
71
86
86
93
114
110
7
10
10
10
13
13
13
16
16
16
16
19
19
22
22
22
22
28
28
28
35
35
35
41
41
50
57
70
9
11
11
11
14
14
14
16
16
16
16
19
19
20
20
20
20
26
26
26
28
28
28
33
33
40
41
41
21
25
25
25
33
33
33
41
41
41
41
48
48
54
54
54
54
68
68
68
80
80
80
90
90
107
143
158
Turnbuckles
Green Pin® turnbuckles Jaw - Jaw with safety bolt
weight
each
kg
0.55
0.96
1.18
1.50
1.75
2.14
2.43
2.7
3.23
3.57
4.55
5.22
6.56
5.54
6.96
8.4
8.9
11.9
13.6
14.2
18.5
19.3
22
30
33
50
92
109
CAD
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
101
Turnbuckles
Green Pin® Polar turnbuckles Jaw - Jaw with safety bolt
generally to ASTM F1145-92
mm inch
• Material
: drop forged alloy steel, Grade 8, quenched and tempered
• Safety factor
: MBL equals 5 x WLL
• Standard
: generally to ASTM F1145-92
formerly U.S. Federal Specification FF-T-791b
• Finish
: hot dipped galvanized
• Temperature Range : -40°C up to +200°C
• Certification
: 2.1 2.2 3.1
:
• Note
: jaw ends up to and including 5/8” are fitted with bolts and nuts, sizes 3/4” and up
are equipped with bolts, nuts and cotter pins
working
load
limit
t
G-6333
1
1.59
2.36
3.27
4.54
6.9
9.71
12.7
diameter
thread
take
up
a
inch
/2
5
/8
3
/4
7
/8
1
1
1 1/4
1 1/2
1 3/4
length
open
position
c
inch
length
closed
position
d
inch
opening
jaw
length
inside
diameter
pin
thickness
jaw eye
diameter
jaw eye
inch
length
closed
position
b
inch
e
inch
f
inch
g
inch
h
inch
i
inch
12
12
18
18
18
18
18
18
17 15/16
19  5/8
26 11/32
28  1/32
29 17/32
31 23/32
32  1/2
36 29/32
29  1/8
30  7/16
43  5/32
44  9/16
46
48  7/8
48 31/32
51 13/16
19  1/2
21 15/16
29  1/8
31  3/32
32  7/8
35 13/16
37  5/8
5/8
23/32
15/16
1  3/32
1  1/4
1  3/4
2  1/32
2 11/32
1  1/32
1  9/32
1 17/32
1 11/16
1 31/32
2 25/32
2 25/32
3  3/8
13/32
1/2
5/8
3/4
7/8
1  1/8
1  3/8
1  5/8
7/16
9/16
5/8
3/4
25/32
1  1/32
1  1/8
1  5/16
1
1  5/16
1  5/8
1 29/32
2  1/8
2 11/16
3  5/32
3  9/16
43
weight
each
lbs
3.31
5.11
10.08
14.33
18.52
30
46.5
66.1
CAD
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
102
generally to ASTM F1145-92
mm inch
• Material
: drop forged alloy steel, Grade 8, quenched and tempered
• Safety factor
: MBL equals 5 x WLL
• Standard
: generally to ASTM F1145-92
formerly U.S. Federal Specification FF-T-791b
• Finish
: hot dipped galvanized
• Temperature Range : -40°C up to +200°C
• Certification
Turnbuckles
Green Pin® Polar turnbuckles Jaw - Jaw with safety bolt
: 2.1 2.2 3.1
:
• Note
: jaw ends up to and including 5/8” are fitted with bolts and nuts, sizes 3/4” and up
are equipped with bolts, nuts and cotter pins
working
load
limit
t
G-6333
1
1.59
2.36
3.27
4.54
6.9
9.71
12.7
diameter
thread
take
up
a
inch
/2
5
/8
3
/4
7
/8
1
1
1 1/4
1 1/2
1 3/4
length
open
position
c
mm
length
closed
position
d
mm
opening
jaw
length
inside
diameter
pin
thickness
jaw eye
diameter
jaw eye
inch
length
closed
position
b
mm
weight
each
e
mm
f
mm
g
mm
h
mm
i
mm
kg
12
12
18
18
18
18
18
18
455
498
670
713
750
805
825
938
740
774
1096
1132
1168
1230
1244
1316
494
557
740
790
835
910
956
1092
16
18
24
27
31
44
52
60
26
32
38
42
50
71
71
86
10
13
16
19
22
28
35
41
11
14
16
19
20
26
28
33
25
33
41
48
54
68
80
90
1.50
2.32
4.57
6.5
8.4
13.6
21.1
30
CAD
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
103
Turnbuckles
Green Pin® turnbuckles Eye - Eye
generally to ASTM F1145-92
•
•
•
•
Material
Safety factor
Standard
Finish
• Certification
working
load
limit
t
G-6311
6
7
8
9
10
0.54
1
1
1
1.59
1.59
1.59
2.36
2.36
2.36
2.36
3.27
3.27
4.54
4.54
4.54
4.5
6.9
6.9
6.9
9.71
9.71
9.71
12.7
12.7
16.8
27.2
34
: drop forged high tensile steel SAE 1035 or 1045
: MBL equals 5 x WLL
: generally to ASTM F1145-92
formerly U.S. Federal Specification FF-T-791b
: hot dipped galvanized
: 2.1 2.2 3.1
:
diameter
thread
take
up
a
inch
/8
1
/2
1
/2
1
/2
5
/8
5
/8
5
/8
3
/4
3
/4
3
/4
3
/4
7
/8
7
/8
3
1
1
1
1
1 1/4
1 1/4
1 1/4
1 1/2
1 1/2
1 1/2
1 3/4
1 3/4
2
2 1/2
2 3/4
mm inch
length
open
position
c
inch
length
diameter
width
inside
length
inside
inch
length
closed
position
b
inch
weight
each
g
inch
length
closed
position
h
inch
d
inch
e
inch
f
inch
6
6
9
12
6
9
12
6
9
12
18
12
18
6
12
18
24
12
18
24
12
18
24
18
24
24
24
24
11 17/32
12 25/32
15  3/4
18  3/4
14 15/16
17 15/16
20 29/32
16  9/32
19  5/16
22  3/16
28  1/4
23 25/32
29  3/4
19  5/8
25  9/16
31 17/32
37  1/2
28
33 15/16
39 31/32
29  3/4
36  1/32
41 15/16
40  5/32
46  1/8
49 25/32
56  5/16
57  3/32
16  7/8
17 15/16
23 15/16
29 29/32
19 13/16
25 13/16
31 13/16
20 15/16
26 15/16
32 15/16
45
34  1/4
46  7/32
23 25/32
35 25/32
47 27/32
59 25/32
38 25/32
50 11/16
60  7/32
40  9/32
52  9/16
64 13/32
54 15/16
67  1/16
70  1/4
76  5/32
78  9/32
7  3/16
7 19/32
10  5/8
13  5/8
8
11  1/32
14
8  7/16
11  1/2
14  7/16
20  7/16
14 13/16
20 13/16
9  1/4
15  1/4
21  1/4
27  1/4
15  5/32
21  5/32
27  5/32
15 25/32
21 25/32
27 25/32
22 23/32
28 23/32
29  7/16
31  9/16
31  9/16
13/32
15/32
15/32
15/32
9/16
9/16
9/16
11/16
11/16
11/16
11/16
25/32
25/32
15/16
15/16
15/16
15/16
1  5/32
1  5/32
1  5/32
1  9/32
1  9/32
1  9/32
1 17/32
1 17/32
1 13/16
2
2  1/4
1/2
23/32
23/32
23/32
13/16
13/16
13/16
1  1/32
1  1/32
1  1/32
1  1/32
1  9/32
1  9/32
1  1/2
1  1/2
1  1/2
1  1/2
1  7/8
1  7/8
1  7/8
2  5/32
2  5/32
2  5/32
2  3/8
2  3/8
2 23/32
3  5/32
3  5/16
1  5/32
1  7/16
1  7/16
1  7/16
1 25/32
1 25/32
1 25/32
2  1/8
2  1/8
2  1/8
2  1/8
2  3/8
2  3/8
3
3
3
3
3 19/32
3 19/32
3 19/32
4  5/32
4  5/32
4  5/32
4 23/32
4 23/32
5 25/32
6  1/2
7
1 15/16
2  9/32
2  1/4
2  1/4
3  1/8
3  3/32
3  3/32
3 17/32
3 17/32
3  1/2
3 17/32
3 31/32
3 31/32
4  5/8
4 19/32
4 19/32
4  9/16
5 23/32
5 11/16
5 11/16
6  1/8
6  9/32
6  3/16
7  3/4
7 23/32
9  3/32
10 25/32
11  3/16
1.06
1.79
2.36
2.84
2.93
3.55
4.32
4.48
5.45
6.39
8.69
9.5
12.15
9.59
12.68
16.03
16.58
20.46
24.5
26.7
31.3
34.8
37.7
51
58
89.7
141
194
lbs
CAD
11
12
13
14
15
16
17
18
19
20
104
generally to ASTM F1145-92
•
•
•
•
Material
Safety factor
Standard
Finish
• Certification
working
load
limit
t
G-6311
0.54
1
1
1
1.59
1.59
1.59
2.36
2.36
2.36
2.36
3.27
3.27
4.54
4.54
4.54
4.5
6.9
6.9
6.9
9.71
9.71
9.71
12.7
12.7
16.8
27.2
34
: drop forged high tensile steel SAE 1035 or 1045
: MBL equals 5 x WLL
: generally to ASTM F1145-92
formerly U.S. Federal Specification FF-T-791b
: hot dipped galvanized
: 2.1 2.2 3.1
:
diameter
thread
take
up
a
inch
/8
1
/2
1
/2
1
/2
5
/8
5
/8
5
/8
3
/4
3
/4
3
/4
3
/4
7
/8
7
/8
3
1
1
1
1
1 1/4
1 1/4
1 1/4
1 1/2
1 1/2
1 1/2
1 3/4
1 3/4
2
2 1/2
2 3/4
mm inch
length
open
position
c
mm
length
diameter
width
inside
length
inside
inch
length
closed
position
b
mm
weight
each
g
mm
length
closed
position
h
mm
d
mm
e
mm
f
mm
6
6
9
12
6
9
12
6
9
12
18
12
18
6
12
18
24
12
18
24
12
18
24
18
24
24
24
24
292
325
400
476
380
455
531
413
490
564
718
604
756
498
649
801
952
712
862
1015
756
916
1065
1020
1171
1264
1430
1450
428
455
608
760
503
656
808
532
685
837
1143
870
1174
604
909
1215
1518
985
1287
1592
1023
1335
1636
1396
1703
1784
1934
1988
183
193
270
346
203
280
356
214
291
367
519
377
529
234
387
539
692
385
537
690
401
553
706
577
730
748
802
802
10
12
12
12
14
14
14
17
17
17
17
20
20
24
24
24
24
29
29
29
32
32
32
38
38
46
51
57
13
18
18
18
21
21
21
26
26
26
26
32
32
37
37
37
37
47
47
47
55
55
55
61
61
69
80
84
29
36
36
36
45
45
45
54
54
54
54
61
61
76
76
76
76
91
91
91
106
106
106
120
120
147
165
178
49
58
57
57
79
78
78
89
89
88
89
101
101
118
117
117
116
145
144
144
156
160
158
197
196
230
274
284
0.48
0.81
1.07
1.29
1.33
1.61
1.96
2.03
2.47
2.9
3.94
4.31
5.51
4.35
5.75
7.27
7.52
9.28
11.1
12.1
14.2
15.8
17.1
23.1
26.3
40.7
64
88
Turnbuckles
Green Pin® turnbuckles Eye - Eye
kg
CAD
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
105
Turnbuckles
Green Pin® turnbuckles Hook - Hook
generally to ASTM F1145-92
•
•
•
•
Material
Safety factor
Standard
Finish
G-6312
:
diameter
thread
take
up
a
inch
inch
t
0.54
1
1
0.68
1.02
1.59
1.02
2.36
1.36
2.36
2.36
2.27
4.54
2.27
2.27
: drop forged high tensile steel SAE 1035 or 1045
: MBL equals 5 x WLL
: generally to ASTM F1145-92
formerly U.S. Federal Specification FF-T-791b
: hot dipped galvanized
: 2.1 2.2 3.1
• Certification
working
load
limit
/8
1
/2
1
/2
1
/2
5
/8
5
/8
5
/8
3
/4
3
/4
3
/4
3
/4
3
1
1
1
1
mm inch
6
6
9
12
6
9
12
6
9
12
18
6
12
18
24
length
closed
position
b
inch
10 15/16
12
14 15/16
17 31/32
14
17
19 31/32
15  1/2
18  7/16
21  7/16
27  3/8
18  7/8
24 19/32
30 19/32
36 17/32
length
open
position
c
inch
16 11/32
17  1/8
23  1/8
29  3/32
18  7/8
24  7/8
30 13/16
20  1/8
26  1/8
32  1/8
44  3/8
23  3/32
34  7/8
46 29/32
58  3/4
thickness
hook
thickness
hook
opening
hook
d
inch
e
inch
f
inch
1/2
5/8
5/8
1/2
5/8
25/32
5/8
7/8
25/32
7/8
7/8
1  1/32
1  1/32
1  1/32
1  1/32
5/8
7/8
7/8
3/4
29/32
15/16
29/32
1  3/32
1  3/32
1  3/32
1  3/32
1  3/8
1  3/8
1  3/8
1  3/8
19/32
5/8
5/8
5/8
13/16
13/16
13/16
15/16
15/16
15/16
15/16
1  1/4
1  1/4
1  1/4
1  1/4
length
closed
position
g
inch
1 11/16
1 29/32
1  7/8
1  7/8
2  5/8
2 19/32
2 19/32
3  1/8
3  3/32
3  3/32
3  3/32
4  9/32
4  5/32
4  5/32
4  1/8
weight
each
lbs
1.17
2.05
2.56
2.95
2.16
4.32
3.77
3.37
4.14
7.21
9.92
8.53
14.64
13.23
16.58
CAD
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
106
generally to ASTM F1145-92
•
•
•
•
Material
Safety factor
Standard
: 2.1 2.2 3.1
0.54
1
1
0.68
1.02
1.59
1.02
2.36
1.36
2.36
2.36
2.27
4.54
2.27
2.27
:
diameter
thread
take
up
a
inch
t
G-6312
: drop forged high tensile steel SAE 1035 or 1045
: MBL equals 5 x WLL
: generally to ASTM F1145-92
formerly U.S. Federal Specification FF-T-791b
: hot dipped galvanized
Finish
• Certification
working
load
limit
/8
1
/2
1
/2
1
/2
5
/8
5
/8
5
/8
3
/4
3
/4
3
/4
3
/4
3
1
1
1
1
mm inch
length
open
position
c
mm
thickness
hook
thickness
hook
opening
hook
inch
length
closed
position
b
mm
weight
each
f
mm
length
closed
position
g
mm
d
mm
e
mm
6
6
9
12
6
9
12
6
9
12
18
6
12
18
24
278
305
380
456
356
431
507
393
468
544
696
479
625
778
928
415
434
587
739
479
632
784
511
664
816
1122
586
886
1191
1495
13
16
16
13
16
20
16
22
20
22
22
26
26
26
26
16
22
22
19
23
24
23
27
27
27
27
35
35
35
35
15
16
16
16
21
21
21
24
24
24
24
31
31
31
31
42
48
47
47
67
66
66
79
78
78
78
109
106
106
105
0.53
0.93
1.16
1.34
0.98
1.96
1.71
1.53
1.88
3.27
4.5
3.87
6.64
6
7.52
Turnbuckles
Green Pin® turnbuckles Hook - Hook
kg
CAD
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
107
Turnbuckles
Green Pin® turnbuckles Eye - Jaw
generally to ASTM F1145-92
•
•
•
•
Material
Safety factor
Standard
Finish
mm inch
: drop forged high tensile steel SAE 1035 or 1045
: MBL equals 5 x WLL
: generally to ASTM F1145-92
formerly U.S. Federal Specification FF-T-791b
: hot dipped galvanized
: 2.1 2.2 3.1
• Certification
:
• Note
: jaw ends up to and including 5/8” are fitted with bolts and nuts, sizes 3/4” and up
are equipped with pins and cotters.
working diameter take length
length opening
load thread up
closed
open
jaw
limit
position position
a
b
c
d
t
inch
inch
inch
inch
inch
G-6315
i
6
7
8
9
10
11
0.54
1
1
1
1.59
1.59
1.59
2.36
2.36
2.36
2.36
3.27
3.27
4.54
4.54
4.54
4.5
6.9
6.9
6.9
9.71
9.71
9.71
12.7
12.7
16.8
27.2
34
/8
1
/2
1
/2
1
/2
5
/8
5
/8
5
/8
3
/4
3
/4
3
/4
3
/4
7
/8
7
/8
3
1
1
1
1
1 1/4
1 1/4
1 1/4
1 1/2
1 1/2
1 1/2
1 3/4
1 3/4
2
2 1/2
2 3/4
6
6
9
12
6
9
12
6
9
12
18
12
18
6
12
18
24
12
18
24
12
18
24
18
24
24
24
24
11  5/32
12  3/8
15 11/32
18 11/32
14  9/32
17  9/32
20  1/4
15  3/8
18  3/8
21 11/32
27  5/16
22 15/16
28 29/32
18  5/8
24  9/16
30 17/32
36 17/32
26  5/8
32 25/32
38 15/16
28  5/32
34  9/32
40  9/32
38  9/16
44  1/2
47  9/16
52  7/8
55  3/32
16  1/2
17 19/32
23  9/16
29  9/16
19  5/32
25  5/32
31  5/32
20  3/32
26  3/32
32  3/32
44  3/32
33  3/8
45 13/32
22 25/32
34 25/32
46 27/32
58 13/16
37  3/8
49 17/32
61 21/32
38 23/32
50 25/32
60  3/4
53 13/32
65  7/16
68  1/32
74 25/32
76 29/32
15/32
5/8
5/8
5/8
23/32
23/32
23/32
15/16
15/16
15/16
15/16
1  3/32
1  3/32
1  1/4
1  1/4
1  1/4
1  1/4
1  3/4
1  3/4
1  3/4
2  1/32
2  1/32
2  1/32
2 11/32
2 11/32
2  1/2
2 15/16
3  9/16
length
inside
jaw
e
inch
13/16
1  1/32
1  1/32
1  1/32
1  9/32
1  9/32
1  9/32
1 17/32
1 17/32
1 17/32
1 17/32
1 11/16
1 11/16
1 31/32
1 31/32
1 31/32
1 31/32
2 25/32
2 25/32
2 25/32
2 25/32
2 25/32
2 25/32
3  3/8
3  3/8
3 11/16
4   1/2
4  5/16
diameter thickness diameter diameter
pin
eye
eye
eye
jaw
jaw
jaw
f
g
h
i
inch
inch
inch
inch
5/16
13/32
13/32
13/32
1/2
1/2
1/2
5/8
5/8
5/8
5/8
3/4
3/4
7/8
7/8
7/8
7/8
1 5/32
1 5/32
1 5/32
1 3/8
1 3/8
1 3/8
1 5/8
1 5/8
2
2 1/4
2 3/4
11/32
7/16
7/16
7/16
9/16
9/16
9/16
5/8
5/8
5/8
5/8
3/4
3/4
25/32
25/32
25/32
25/32
1  1/32
1  1/32
1  1/32
1  1/8
1  1/8
1  1/8
1  5/16
1  5/16
1 19/32
1  5/8
1  5/8
13/16
1
1
1
1  5/16
1  5/16
1  5/16
1  5/8
1  5/8
1  5/8
1  5/8
1 29/32
1 29/32
2  1/8
2  1/8
2  1/8
2  1/8
2 11/16
2 11/16
2 11/16
3  5/32
3  5/32
3  5/32
3  9/16
3  9/16
4  3/16
5  5/8
6  3/16
13/32
15/32
15/32
15/32
9/16
9/16
9/16
11/16
11/16
11/16
11/16
25/32
25/32
15/16
15/16
15/16
15/16
1  5/32
1  5/32
1  5/32
1  9/32
1  9/32
1  9/32
1 17/32
1 17/32
1 13/16
2
2  1/4
width
inside
eye
j
inch
length
inside
eye
k
inch
length
closed
position
l
inch
weight
each
1/2
23/32
23/32
23/32
13/16
13/16
13/16
1 1/32
1 1/32
1 1/32
1 1/32
1 9/32
1 9/32
1 1/2
1 1/2
1 1/2
1 1/2
1 7/8
1 7/8
1 7/8
2 5/32
2 5/32
2 5/32
2 3/8
2 3/8
2 23/32
3  5/32
3  5/16
1  5/32
1  7/16
1  7/16
1  7/16
1 25/32
1 25/32
1 25/32
2  1/8
2  1/8
2  1/8
2  1/8
2  3/8
2  3/8
3
3
3
3
3 19/32
3 19/32
3 19/32
4  5/32
4  5/32
4  5/32
4 23/32
4 23/32
5 25/32
6  1/2
7
1 15/16
2  9/32
2  1/4
2  1/4
3  1/8
3  3/32
3  3/32
3 17/32
3 17/32
3  1/2
3 17/32
3 31/32
3 31/32
4  5/8
4 19/32
4 19/32
4  9/16
5 23/32
5 11/16
5 11/16
6  1/8
6  9/32
6  3/16
7  3/4
7 23/32
9  3/32
10 25/32
11  3/16
1.15
1.94
2.49
3.02
3.42
4.06
4.78
5.03
6.22
6.5
7.28
9.59
12.04
10.27
13.1
17.59
18.41
22.9
24.3
28.4
28.9
32.4
39.2
49.2
60.6
94.6
150
200
lbs
CAD
12
13
14
15
16
17
18
19
20
108
generally to ASTM F1145-92
•
•
•
•
Material
Safety factor
Standard
mm inch
: drop forged high tensile steel SAE 1035 or 1045
: MBL equals 5 x WLL
: generally to ASTM F1145-92
formerly U.S. Federal Specification FF-T-791b
: hot dipped galvanized
Finish
: 2.1 2.2 3.1
• Certification
:
Turnbuckles
Green Pin® turnbuckles Eye - Jaw
• Note
: jaw ends up to and including 5/8” are fitted with bolts and nuts, sizes 3/4” and up
are equipped with pins and cotters.
working diameter
load
thread
limit
a
t
inch
G-6315
i
0.54
1
1
1
1.59
1.59
1.59
2.36
2.36
2.36
2.36
3.27
3.27
4.54
4.54
4.54
4.5
6.9
6.9
6.9
9.71
9.71
9.71
12.7
12.7
16.8
27.2
34
/8
1
/2
1
/2
1
/2
5
/8
5
/8
5
/8
3
/4
3
/4
3
/4
3
/4
7
/8
7
/8
3
1
1
1
1
1 1/4
1 1/4
1 1/4
1 1/2
1 1/2
1 1/2
1 3/4
1 3/4
2
2 1/2
2 3/4
take
up
inch
6
6
9
12
6
9
12
6
9
12
18
12
18
6
12
18
24
12
18
24
12
18
24
18
24
24
24
24
length length opening length diameter thickness diameter diameter width
closed
open
jaw
inside
pin
eye
eye
eye
inside
position position
jaw
jaw
jaw
jaw
eye
b
c
d
e
f
g
h
i
j
mm
mm
mm
mm
mm
mm
mm
mm
mm
283
315
390
466
363
438
514
391
467
542
694
583
735
473
624
776
928
677
833
989
716
871
1023
979
1130
1208
1343
1399
418
446
598
751
486
639
790
510
663
815
1120
848
1153
579
884
1190
1494
950
1258
1566
983
1290
1594
1356
1662
1728
1899
1953
12
16
16
16
18
18
18
24
24
24
24
27
27
31
31
31
31
44
44
44
52
52
52
60
60
63
75
90
21
26
26
26
32
32
32
38
38
38
38
42
42
50
50
50
50
71
71
71
71
71
71
86
86
93
114
110
8
10
10
10
13
13
13
16
16
16
16
19
19
22
22
22
22
29
29
29
35
35
35
41
41
51
57
70
9
11
11
11
14
14
14
16
16
16
16
19
19
20
20
20
20
26
26
26
28
28
28
33
33
40
41
41
21
25
25
25
33
33
33
41
41
41
41
48
48
54
54
54
54
68
68
68
80
80
80
90
90
107
143
158
10
12
12
12
14
14
14
17
17
17
17
20
20
24
24
24
24
29
29
29
32
32
32
38
38
46
51
57
13
18
18
18
21
21
21
26
26
26
26
32
32
37
37
37
37
47
47
47
55
55
55
61
61
69
80
84
length
inside
eye
k
mm
29
36
36
36
45
45
45
54
54
54
54
61
61
76
76
76
76
91
91
91
106
106
106
120
120
147
165
178
length weight
closed
each
position
l
mm
kg
49
58
57
57
79
78
78
89
89
88
89
101
101
118
117
117
116
145
144
144
156
160
158
197
196
230
274
284
0.52
0.88
1.13
1.37
1.55
1.84
2.17
2.28
2.82
2.95
3.30
4.35
5.46
4.66
5.94
7.98
8.35
10.4
11
12.9
13.1
14.7
17.8
22.3
27.5
42.9
68
91
CAD
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
109
Turnbuckles
Green Pin® turnbuckles Eye - Hook
generally to ASTM F1145-92
•
•
•
•
Material
Safety factor
Standard
: drop forged high tensile steel SAE 1035 or 1045
: MBL equals 5 x WLL
: generally to ASTM F1145-92
formerly U.S. Federal Specification FF-T-791b
: hot dipped galvanized
Finish
: 2.1 2.2 3.1
• Certification
working
load
limit
t
G-6314
0.54
1
1
0.68
1.02
1.59
1.02
2.36
1.36
2.36
2.36
2.27
4.54
2.27
2.27
:
diameter
thread
take
up
a
inch
inch
length
closed
position
b
mm
6
6
9
12
6
9
12
6
9
12
18
6
12
18
24
285
315
390
466
368
443
519
403
479
554
707
488
636
789
939
/8
1
/2
1
/2
1
/2
5
/8
5
/8
5
/8
3
/4
3
/4
3
/4
3
/4
3
1
1
1
1
length thickness thickness opening
open
hook
hook
hook
position
c
d
e
f
mm
mm
mm
mm
422
445
598
750
491
644
796
521
675
827
1133
595
897
1202
1506
13
16
16
13
16
20
16
22
20
22
22
26
26
26
26
16
22
22
19
23
24
23
27
27
27
27
35
35
35
35
15
16
16
16
21
21
21
24
24
24
24
31
31
31
31
diameter
eye
length
inside
eye
i
mm
length
closed
position
j
mm
weight
each
g
mm
width
inside
eye
h
mm
10
12
12
12
14
14
14
17
17
17
17
24
24
24
24
13
18
18
18
21
21
21
26
26
26
26
36
36
36
36
29
36
36
36
45
45
45
54
54
54
54
75
75
75
75
49
58
57
57
79
78
78
89
89
88
89
118
117
117
116
0.47
0.82
1.06
1.28
1.31
1.56
1.71
2.04
4.49
2.3
2.85
3.87
5.09
6
7.52
diameter
eye
length
inside
eye
i
inch
length
closed
position
j
inch
weight
each
g
inch
width
inside
eye
h
inch
/32
15
/32
15
/32
15
/32
9
/16
9
/16
9
/16
11
/16
11
/16
11
/16
11
/16
15
/16
15
/16
15
/16
15
/16
1/2
23/32
23/32
23/32
13/16
13/16
13/16
1  1/32
1  1/32
1  1/32
1  1/32
1  7/16
1  7/16
1  7/16
1  7/16
1  5/32
1  7/16
1  7/16
1  7/16
1 25/32
1 25/32
1 25/32
2  1/8
2  1/8
2  1/8
2  1/8
2 15/16
2 15/16
2 15/16
2 15/16
1 15/16
2  9/32
2  1/4
2  1/4
3  1/8
3  3/32
3  3/32
3 17/32
3 17/32
3  1/2
3 17/32
4  5/8
4 19/32
4 19/32
4  9/16
1.04
1.81
2.34
2.82
2.89
3.44
3.77
4.5
9.9
5.07
6.28
8.53
11.22
13.23
16.58
kg
In inch
6
working diameter
load
thread
limit
a
t
inch
7
8
0.54
1
1
0.68
1.02
1.59
1.02
2.36
1.36
2.36
2.36
2.27
4.54
2.27
2.27
9
10
11
12
13
14
15
/8
1
/2
1
/2
1
/2
5
/8
5
/8
5
/8
3
/4
3
/4
3
/4
3
/4
3
1
1
1
1
take
up
inch
length
closed
position
b
inch
length
open
position
c
inch
6
6
9
12
6
9
12
6
9
12
18
6
12
18
24
11  1/4
12  3/8
15 11/32
18 11/32
14  1/2
17  1/2
20  7/16
15  7/8
18  7/8
21 13/16
27 13/16
19  1/4
25  1/32
31  1/32
36 15/16
16  5/8
17  9/16
23  9/16
29 17/32
19 11/32
25 11/32
31  5/16
20 17/32
26  9/16
32  9/16
44  5/8
23  7/16
35  5/16
47  5/16
59  5/16
thickness thickness opening
hook
hook
hook
d
inch
e
inch
f
inch
1/2
5/8
5/8
1/2
5/8
25/32
5/8
7/8
25/32
7/8
7/8
1  1/32
1  1/32
1  1/32
1  1/32
5/8
7/8
7/8
3/4
29/32
15/16
29/32
1  3/32
1  3/32
1  3/32
1  3/32
1  3/8
1  3/8
1  3/8
1  3/8
19/32
5/8
5/8
5/8
13/16
13/16
13/16
15/16
15/16
15/16
15/16
1  1/4
1  1/4
1  1/4
1  1/4
13
lbs
CAD
16
17
18
19
20
110
Turnbuckles
Rigging screws Eye - Eye
according to DIN 1480
• Material
• Standard
• Finish
: drop forged mild steel
: DIN 1480
: electro-galvanized
• Certification
:
diameter
thread
E-6351
length
open
position
c
mm
length
body
length
end fitting
length
thread
a
mm
length
closed
position
b
mm
d
mm
e
mm
5
6
8
10
12
14
16
20
22
24
30
33
36
42
114
160
168
210
222
244
300
334
372
410
440
490
554
600
170
246
248
300
305
334
416
466
527
587
605
690
740
800
70
110
110
125
125
140
170
200
220
255
255
295
295
330
57
80
84
105
110
123
143
165
185
208
220
245
277
300
diameter
eye
inside
h
mm
weight
each
f
mm
diameter
eye
outside
g
mm
35
55
57
68
70
75
88
105
118
135
135
148
158
170
16
20
22
31
35
40
47
52
60
65
71
88
94
110
8
9
10
14
16
18
22
24
27
27
31
36
38
49
0.07
0.11
0.2
0.28
0.43
0.61
1
1.6
2.2
2.8
4.1
6
8.5
11
kg
Rigging screws Hook - Hook
6
according to DIN 1480
7
• Material
• Standard
• Finish
: drop forged mild steel
: DIN 1480
: electro-galvanized
8
• Certification
:
: 2.1
9
diameter
thread
E-6352
: 2.1
length
open
position
c
mm
length
body
length
end fitting
length
thread
opening
hook
thickness
hook
weight
each
a
mm
length
closed
position
b
mm
d
mm
e
mm
f
mm
g
mm
h
mm
kg
6
8
10
12
14
16
20
22
24
30
33
36
184
200
234
260
278
322
382
456
496
550
600
640
270
280
323
343
368
438
514
601
673
715
799
825
110
110
125
125
140
170
200
220
255
255
295
295
92
100
117
130
139
161
191
228
248
275
300
320
55
57
68
70
75
88
105
118
135
135
148
158
8
10.5
13
16
18
20
21
24
26
34
38
46
15
15
11
13
15
17
21
28
33
35
40
45
0.11
0.2
0.28
0.43
0.61
1
1.6
2.2
2.8
4.1
6
8.3
10
11
12
13
14
15
16
17
18
19
20
111
Turnbuckles
Rigging screws Eye - Hook
according to DIN 1480
• Material
• Standard
• Finish
: drop forged mild steel
: DIN 1480
: electro-galvanized
• Certification
:
diameter
thread
E-6354
: 2.1
length
open
position
c
mm
length
body
a
mm
length
closed
position
b
mm
length
length
end fitting end fitting
d
mm
e
mm
5
6
8
10
12
14
16
20
22
24
30
33
36
125
172
184
222
241
261
311
358
414
453
495
545
597
180
258
264
311
324
351
427
490
559
630
660
744
782
70
110
110
125
125
140
170
200
220
255
255
295
295
56
77
85
106
117
124
144
170
200
215
240
260
275
6
Rigging screws Jaw - Jaw
7
according to DIN 1480
•
•
•
•
8
9
Material
Standard
Finish
Note
diameter
thread
11
12
E-6353
13
14
15
16
17
18
19
20
112
opening
hook
thickness
hook
diameter
eye
inside
k
mm
weight
each
i
mm
diameter
eye
outside
j
mm
f
mm
g
mm
h
mm
57
80
84
105
111
122
150
167
186
205
220
245
277
35
55
57
68
70
75
88
105
118
135
135
148
158
7
8
10.5
13
16
18
20
21
24
26
34
38
46
12
15
15
11
13
15
17
21
28
33
35
40
45
16
20
22
31
35
40
47
52
60
65
71
88
94
8
9
10
14
16
18
22
24
27
27
31
36
38
0.07
0.11
0.2
0.28
0.43
0.61
1
1.6
2.2
2.8
4.1
6
8.4
kg
: drop forged mild steel
: DIN 1480
: electro-galvanized
: supplied with locking nuts
: 2.1
• Certification
10
length
thread
:
length
open
position
c
mm
length
body
opening
jaw
length
inside
diameter
pin
thickness
jaw eye
diameter
jaw eye
a
mm
length
closed
position
b
mm
weight
each
d
mm
e
mm
f
mm
g
mm
h
mm
i
mm
kg
6
8
10
12
14
16
20
22
24
30
191
194
236
266
316
374
438
466
514
544
277
274
325
349
406
490
570
611
691
709
110
110
125
125
140
170
200
220
255
255
7.5
8.5
11
13
16
18
20
22
24
30
12
12
16
20
30
38
42
44
46
50
M 6
M 6
M 8
M 10
M 12
M 12
M 16
M 18
M 20
M 24
5
6
8
10
12
12
16
18
20
22
13
14
18
24
28
32
38
40
42
46
0.16
0.21
0.38
0.66
1.15
1.45
2.61
3.24
4.35
6.48
Turnbuckles
Rigging screws with Welding Ends
according to DIN 1480
• Material
• Standard
• Finish
• Certification
diameter
thread
E-6355
: 2.1
:
length
open
position
c
mm
length
body
a
mm
length
closed
position
b
mm
6
8
10
12
14
16
20
22
24
30
36
240
240
300
300
330
400
440
440
520
520
600
326
320
389
383
420
516
572
585
697
685
780
length
stub-ends
length
thread
d
mm
length
body
inside
e
mm
f
mm
g
mm
110
110
125
125
140
170
200
220
255
255
295
86
80
89
83
90
116
132
145
177
165
185
120
120
150
150
165
200
220
220
260
260
300
65
65
75
75
85
100
120
130
150
160
180
weight
per
100 pcs
kg
9.3
14
29
40
66
89
160
227
282
423
710
Turnbuckles (hamburgers)
6
for deck lashing
7
• Material
• Finish
: mild steel
: self coloured
• Certification
:
minimum
breaking
load
S-6330
: drop forged mild steel
: DIN 1480
: Body: electro-galvanized
Welding ends : self coloured
8
: 2.1
9
diameter
thread
length
thread
diameter
bow
length
bow
t
a
mm
b
mm
c
mm
d
mm
kg
13
13
18
18
20
20
21
21
24
24
27
27
30
30
36
36
400
500
400
500
400
500
400
500
16
16
18
18
20
20
20
20
210
260
210
260
210
260
210
260
2.8
3.8
4.4
5.5
5
6.3
7
8.8
10
weight
each
11
12
13
14
15
16
17
18
19
20
113
Turnbuckles
Closed body rigging screws
Jaw - Jaw
• Material
• Safety factor
• Finish
: mild steel
: MBL equals 5 x WLL,
: hot dipped galvanized
• Certification
:
• Note
: end fittings of 6 and 8 mm rigging screws are electro-galvanized
working
load
limit
G-6343
j
: 2.1 2.2
diameter
thread
length
body
length
open
position
d
mm
diameter
pin
length
inside
opening
jaw
width
jaw
b
mm
length
closed
position
c
mm
t
a
mm
0.2
0.32
0.5
0.7
1.2
1.5
2.2
3.2
4.8
6
8.5
11
6
8
10
12
16
20
22
24
33
39
45
48
e
mm
f
mm
g
mm
100
108
125
195
230
270
295
325
370
400
400
400
170
199
222
315
388
449
490
538
680
707
761
780
250
279
312
470
568
654
715
793
965
1002
1011
1005
5
6
8
10
12
16
20
22
30
33
39
45
16
22
22
27
33
38
45
52
70
70
86
97
7
9
10.5
13
18
20
25
30
38
45
50
58
6
Closed body rigging screws
7
Eye - Eye
diameter
hole
h
mm
diameter
jaw
eye
i
mm
j
mm
kg
20
24
28
34
42
51
55
70
82
85
94
98
13
14
19
23
29
33
38
46
60
76
85
92
6
8
8
10
11
12
12
12
14
15
16
16
0.15
0.26
0.45
0.85
1.51
2.62
3.94
5.16
11.6
14.2
20.8
24
8
• Material
• Safety factor
• Finish
: mild steel
: MBL equals 5 x WLL,
: hot dipped galvanized
9
• Certification
:
• Note
: end fittings of 6 and 8 mm rigging screws are electro-galvanized
10
working
load
limit
11
12
G-6340
13
14
15
16
h
17
18
19
20
114
weight
each
: 2.1 2.2
diameter
thread
length
body
length
open
position
d
mm
diameter
b
mm
length
closed
position
c
mm
t
a
mm
0.2
0.32
0.5
0.7
1.2
1.5
2.2
3.2
4.8
6
8.5
11
6
8
10
12
16
20
22
24
33
39
45
48
width
eye
inside
g
mm
diameter
hole
e
mm
length
eye
inside
f
mm
100
108
125
195
230
270
295
325
370
400
400
400
160
175
205
320
380
455
495
540
660
720
721
767
240
255
300
480
555
660
720
790
940
1020
879
1032
weight
each
h
mm
kg
5.5
6
8.5
11
12
16
16
19
29
35
31
37
11
12
13
30
40
50
50
56
70
80
49
52
11
12
13
15
20
24
24
28
35
40
49
52
6
8
8
10
11
12
12
12
14
15
16
16
0.12
0.19
0.34
0.77
1.31
2.36
2.94
3.86
8.95
11
13.4
17.9
Turnbuckles
Closed body rigging screws
Eye - Jaw
• Material
• Safety factor
• Finish
: mild steel
: MBL equals 5 x WLL,
: hot dipped galvanized
• Certification
:
• Note
: end fittings of 6 and 8 mm rigging screws are electro-galvanized
working diameter
load
thread
limit
a
t
mm
G-6345
l
0.2
0.32
0.5
0.7
1.2
1.5
2.2
3.2
4.8
6
8.5
11
6
8
10
12
16
20
22
24
33
39
45
48
: 2.1 2.2
length
body
b
mm
100
108
125
195
230
270
295
325
370
400
400
400
length
length diameter
closed
open
pin
position position
c
d
e
mm
mm
mm
165
187
214
317
384
452
493
539
670
714
741
774
247
267
306
475
562
657
717
791
952
1011
945
1018
5
6
8
10
12
16
20
22
30
33
39
45
length
jaw
inside
f
mm
opening
jaw
width
jaw
h
mm
diameter
jaw
eye
i
mm
length
eye
inside
j
mm
width
eye
inside
k
mm
g
mm
16
22
22
27
33
38
45
52
70
70
86
97
7
9
10.5
13
18
20
25
30
38
45
50
58
20
24
28
34
42
51
55
70
82
85
94
98
13
14
19
23
29
33
38
46
60
76
85
92
11
12
13
30
40
50
50
56
70
80
49
52
11
12
13
15
20
24
24
28
35
40
49
52
diameter weight
hole
each
l
mm
kg
6
8
8
10
11
12
12
12
14
15
16
16
0.14
0.24
0.53
0.83
1.49
2.54
3.34
4.65
10.5
12.8
20.8
24
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
115