LON-bus
SynovaTM
LON-bus accessories
Remote display, indication and control for
Synova FC700A and FC330A control panels
z
z
z
z
z
z
z
z
z
Proven LON-bus technology, fault-free and reliable
Compact 2 x 40 character LCD floor repeaters, displaying messages including
service, isolation and alarm events
LED indication unit for alarm and fault status
LED driver module for easy assembly and customized mimic panel
Relay outputs and input / output modules
All accessories are designed to blend into existing building designs
Easy system expansion and customization
Low maintenance
Flush or surface mounting
Building Technologies
Fire Safety & Security Products
Features
The LON-bus interface provides drive capability for floor repeater panels, parallel indicators and mimic panels. This enables system status to be viewed anywhere within a
building. The LON-bus interface also enables remote operation of the fire control devices.
Product features and capabilities
The LON-Bus is a stand-alone information bus. It provides functions, which for security
reasons are not on the detector bus.
Information displays, for example, floor repeater panels, etc. can be positioned up to
1000 meters from the control panel using easily managed, unshielded cabling. The
easily installed LON-bus interface mounts within the control panel and supports the direct connection of floor repeater panels which make small autonomous control panels.
– Up to 32 LON-Bus devices can be connected to FC700A control panel.
– A maximum of 16 LON-Bus devices is possible with FC330A control panel.
Application
The LON-bus is ideal for use in large buildings. It enables system status information to
be viewed and controlled independent of the location of the main control panel by the
addition of floor repeater panels, parallel indicators and mimic panels.
Specific installation or plant requirements can be easily met with the LON-bus. For example, warning devices (emergency exit signs etc.) can be operated via additional relay
cards that may be individually controlled in the event of an emergency.
Installation
– Standard twisted (min. 10 turns per metre) and shielded cable.
– Max. length: up to 1000 m if used as stub line, up to 500 m if used as free topology.
– Free polarity.
System overview
FC700A
24 VDC
power
supply
LON-Bus
interface
FC330A
or
LON-Bus
LON-I/O
modules
FC330A-ECO
or
LON/Synoptic
converter
Databus
Floor repeater panels
Parallel indicators
or
Synoptic/relay
2
Building Technologies
Fire Safety & Security Products
System overview (continued)
3
Building Technologies
Fire Safety & Security Products
System overview (continued)
[1] FC700A Addressable networkable
fire control panel
Up to 16 FC700A fire control panels can
be connected via C-Bus network.
Each FC700A control panel accommodates up to 1000 devices. LON-Bus
devices are connected to FC700A via IBus / LON-Bus interface.
[2] I-Bus / LON-Bus interface E3I040
for FC700A control panel and FT700A
operating terminal
Converter between I-Bus and LON-Bus.
Up to 32 LON-Bus devices connectable.
Monitored two-wire bus without loop line
function.
Mounting accessory Z1B070
To secure the LON interface E3I040 in
H28G200 (FT700A) housing.
Note: Incorporation of LON interface
E3I040 in the FT700A operating terminal prohibits the addition of B3R051
parallel indicator panel on the H28T110
door.
[3] FC330A Two-loop addressable
fire control panel
Expandable to four loops. Accommodates up to 512 addressable devices.
LON-Bus devices are connected to
FC330A via RS232 / LON-Bus interface
K3I080.
[4] FC330A-ECO One-loop addressable fire control panel
Accommodates up to 128 addressable
devices. LON-Bus is connected to
FC330A-ECO via RS232 / LON-Bus
interface K3I080.
[5] RS232 / LON-Bus interface K3I080
for FC330A and FC330A-ECO control
panels
K3I080 can be fitted within the panel at
any time for expansion or retrofit purposes. Up to 16 LON-Bus devices
connectable. Monitored two-wire bus
without loop line function.
[6] Floor repeater panel B3Q580
The floor repeater panel (B3Q580) is
designed for the remote indication of
system messages. Panels can selectively display messages; alarms, warnings and faults. A user-friendly scroll
key enables viewing of up to 200 messages. A built-in buzzer provides additional audible notification of all messages.
4
Building Technologies
Fire Safety & Security Products
[7] Floor repeater panel with control
functions B3Q590
The floor repeater panel (B3Q590) is used
both for the remote indication of messages and to provide acknowledge and
reset control functions in the event of an
alarm. B3Q590 is ideally suited as a mini
control centre at entrances. It enables the
control panel to be reset to normal operation after an event, simply by pressing a
button. Operation of the B3Q590 is enabled by means of a key switch.
[8] Floor repeater panel with control
functions B3Q595
The B3Q595 is a further development of
the B3Q590 with the same features and
advantages. Additionally, B3Q595 can be
included within a like-keyed security
concept.
[6] + [7] + [8] Floor repeater panels
Floor repeater panels display system
messages in areas remote from the panel.
For example, in another floor, wing or
building. All alarm messages can be
indicated on all floor repeater panels and
the control panel.
Floor repeater panels are constantly
monitored. If the LON-bus cabling is cut, a
fault message is shown on the affected
floor repeater panel and the control panel.
Floor repeater panels do not require
configuration. All that is required is for an
address to be locally set.
32 (FC700A) or 16 (FC330A) floor repeater panels can be directly connected
to the LON-bus.
Different types of repeater panels with or
without control functions are available to
suite customer needs.
[9] LON I/O card K3I110
The K3I110 offers 16 inputs and 16 outputs (relay potential free 30 V, 1 A) at the
same time. The inputs supervised on
open circuit, short circuit, deviation and
ground fault.
On the LON-bus up to 32 (FC700A) or 16
(FC330A) input / output-cards can be
connected.
[10] LON / mimic converter K3I050
Converter of the LON-bus to the local
data bus. On the LON-bus up to 32
(FC700A) or 16 (FC330A) LON / mimic
converters (K3I050) can be connected.
Each can drive up to 24 LED indicating
panels (B3R051) or 24 output driver cards
(K3R072).
8 individual addresses for B3R051 /
K3R072 on the local data bus are possible with FC700A control panel, or two
individual addresses are possible with
FC330A / FC330A-ECO control panel.
K3I050 has buzzer, lamp test and other
inputs / outputs.
System overview (continued)
[11] LED indicating panel B3R051
Events associated with fire zones or
areas are displayed in the simplest
manner using the B3R051 LED indicating panels. Two multiplied 24 colored
LEDs show the state of the system at
any time. Red indicates an alarm and
yellow indicates that the relevant zone
is switched off (e.g. due to building
maintenance work, etc.). B3R051 panels are connected to the LON-bus by
means of K3I050 converters. Up to 24
LED indicating panels (B3R051) displaying identical information may be
connected to a single K3I050 converter.
[12] Output driver card K3R072
A single K3R072 driver output card
supports 2 devices; either 2 relay cards
(K3G060); or 2 LED flat cables
(F50F410), or one of each, for a total of
48 individually addressable outputs.
K3R072 has buzzer, lamp test and
other inputs / outputs.
[14] Mimic panel
Mimic panels can be easily designed
around a site layout or floor plan using
K3R072 output driver cards and F50F410
LED flat cables.
The required floor plan or situation plan
forms the front of the mimic panel. The
individually addressable LEDs of the flat
cable are the information carriers on the
front panel in the same manner as LED
indicating panel B3R051.
The LED flat cables connect directly to the
K3R072 output driver cards. The complete mimic panel connects to the output
driver card K3R072 and to the LON-bus
via the K3I050 LON/mimic converter card.
[15] LED ribbon cable, 50 wires 1 m,
with 24 red LED's F50F410
Two F50F410 LED cables can be connected directly to the driver output card
(K3R072) to offer a total of 48 (2 x 24) red
LED. The LED can be easily configured
via the configuration tool.
[13] Relay card K3G060
Customer requirements can be exactly
met by means of K3G060 relay cards.
24 individually addressable relays
provide outputs for installation controls
such as control of emergency exit signs,
voice alarms, announcements, etc.
5
Building Technologies
Fire Safety & Security Products
Technical data
Type
Operating voltage
Quiescent current
– 24 VDC
– 24 VDC max.
Nominal power
– Output buzzer
B3Q580 B3Q590/95 B3R051
9.. 45 VDC 9.. 45 VDC 9.. 45 VDC
K3I050
9.. 45 VDC
K3R072
9.. 45 VDC
K3G060
9.. 45 VDC
K3I110
9.. 45 VDC
18 mA
185 mA
15 mA
30 mA
40 mA
140 mA
6 mA
90 mA
24 mA
184 mA
≤50 mA/
22 VDC
3.3 VDC/
10 mA
≤12 mA/
24 VDC
30 VDC/
1A
30 VDC/
1A
105
200
45
122
220
45(76)
20 mA
180 mA
40 mA
140 mA
– Output LED ON
Relays
– Contact rating
Dimensions (mm)
– Width
– Height
– Depth (with housing)
219
122
66 (76)
219
122
66 (76)
122
219
55 (76)
105
200
45
105
200
45
Reference documents
6
Building Technologies
Fire Safety & Security Products
Doc. no.1583
Synova FC330A
Doc. no. 1923
Synova FC330A
Doc. no. 1973
Doc. no. 007836
Doc. no. 007831
Synova FC330A
Synova FC700A
Synova FC700A
Planning, Installation, Commissioning,
Operating Programming, Trouble Shooting,
Maintenance
Remote indicating & Control devices, Logging
Printer (Installation & Commissioning).
Operating
Planning
Hardware description Modules
Accessories
B3Q580, B3Q590, B3Q595
surface mounting
B3R051
surface mounting
H23G230
B3Q590
B3Q595
B3Q580
H23G230
B3R051
flush mounting
flush mounting
H23U230
H23U230
H23G230
H23Z230
H23Z230
K3I050
H23G230
K3I110
K3I050
K3I050
Z3I530
K3I110
K3I110
Z3I520
F12A...
H23G230
H23G230
Z3B230
K3R072
K3R072
Z3I530
K3G060
F50F410
K3G060
Z3I520
F12A...
7
Building Technologies
Fire Safety & Security Products
Details for ordering
Siemens Switzerland Ltd
Building Technologies Group
International Headquarters
Fire Safety & Security Products
Gubelstrasse 22
CH-6301 Zug
Tel. +41 41 724 24 24
Fax +41 41 724 35 22
www.sbt.siemens.com
Document no.
007349_c_en_--
Edition
08.2006
Type
E3I040
Z1K030
Part no
4993100001
4842310001
Z1B070
A5Q00001720
K3I080
K3I110
B3Q580
B3Q590
5047680001
5288120001
4961770001
4961800001
B3Q595
5341100001
Z5B710
5104480001
Z5B720
5104510001
Z5B730
5104640001
Z5B740
5104770001
H23G230
4750910001
H23U230
H23Z230
5328790001
5328820001
K3I050
Z3B230
4967660001
5590010001
Z3I520
Z3I530
4849690001
4849720001
F12A100
F12A470
K3R072
F50F410
K3G060
B3R051
4952750001
4952880001
5286050001
5291410001
5287860001
4905130001
Designation
LON interface
Terminal block with p.c.b. chassis for mounting E3I040 in FC700A housing
Mounting accessory for E3I040 in housing
H28G200
RS232/LON converter card
LON I/O card
Floor repeater panel
Floor repeater panel with control functions,
Nordic access key
Floor repeater panel with control functions,
Like-Keyed concept
Inscription stripes set “Nordic” to B3Q580
(SE, NO, FI, DK)
Inscription stripes set “Europe” to B3Q580
(GB, DE, FR, IT)
Inscription stripes set “Nordic” to B3Q59x
(SE, NO, FI, DK)
Inscription stripes set “Europe” to B3Q59x
(GB, DE, FR, IT)
Housing to B3Q580 / B3Q590 / B3Q595 /
B3R051 / K3I110
Recess box to H23G230
Flush mount frame to B3Q580 / B3Q590 /
B3Q595 / B3R051
LON/mimic converter
Support plate-set for the installation of
K3I050 in H23G230
Cable set, 12 cables with connector 0.5 m
Adapter for K3I050 to external B3R051 /
K3R072
Flat cable micro 12 pin, 0.4 m
Flat cable micro 12 pin, 1.5 m
Driver output card
LED flat cable, 50 pin, 1m, with 24 red LED’s
Relay card, 24 NO contacts, rating 1 A, 30 V
LED indicating panel 2 x 24 LED’s
Weight
0.325 kg
0.051 kg
0.170 kg
0.178 kg
0.597 kg
0.619 kg
0.675 kg
0.735 kg
–
–
–
–
0.197 kg
0.462 kg
0.204 kg
0.237 kg
0.148 kg
0.055 kg
0.058 kg
0.008 kg
0.021 kg
0.273 kg
0.108 kg
0.396 kg
0.448 kg
© 2006 Copyright by
Siemens Switzerland Ltd
Data and design subject to change without notice.
Supply subject to availability.
Manual FD-C
Section 8