CUSTOMER:
REFERENCE:
5624 WARMING CABINET
PRODUCT SPECIFICATION
PRODUCT
A unique warming cabinet with “look-in” tempered glass doors
into two separate, independently controlled, convection
heated chambers. Temperature range in each compartment is
adjustable from 90°F (32°C) to 160°F (71°C) and is provided
with a “lock-in” feature to prevent unauthorized changes to the
temperature settings.
APPLICATION
The Getinge 5624 Warming Cabinet is designed for the warm
storage of saline solutions and/or blankets used in the care of
patients in areas such as surgery, recovery, OB/GYN, ICU or
ER. Note: This product is not to be used for the storage of
blood or blood products.
DIMENSIONS
Exterior:
Width
30'' (762mm)
Height
60'' (1524mm)
Depth
24''.7 (610mm)
Interior:
Upper:
Lower:
26'' (660mm)
26'' (660mm)
13'' 1(330mm)
40'' (1016mm)
22.7'' (577mm)
22.7'' (577mm)
CAPACITY
Upper Compartment: volume: 4.1 ft3 (116 L)
20 two-liter flasks or equivalent dry goods.
Lower Compartment: volume: 13.4 ft3 (379 L)
60 two-liter flasks or equivalent dry goods.
Total useable volume: 17.5 ft3 (495 L)
DOOR SWING
Left hand hinged
Right hand hinged
QUALITY STATEMENT
MOUNTING
Freestanding Cabinet with Pedestal Base
Recessed with Pedestal Base
Recessed without Pedestal Base
Wall Mounted Cabinet
ELECTRICAL SUPPLY
115V, single phase, 50/60 Hz
230V, single phase, 50/60 Hz
Confidence in the Getinge Group is the most important quality
criterion. This must be the hallmark of all our external and
internal commitments, activities and products. Products and
services supplied by Getinge must conform to the agreed
terms and expectations to ensure recommendations for further
business. The achievement of these quality goals is the basis
for a continued competitive and successful enterprise.
STANDARDS AND CODES
This warming cabinet has been designed to conform to the
requirements of:
• NFPA70
• ETL Listed to UL-544
• CETL Listed to CSA C22.2 No. 151
• California Seismic Anchoring Requirements
Page 3 of 12
WARRANTY*
Getinge USA, Inc. warrants that each warming cabinet is
carefully tested, inspected and leaves the factory in proper
working condition, free from visible defects. Warming Cabinets
are warranted for one year from the start of the warranty,
including parts and labor (excluding expendable parts).
An audible alarm indicates overheat condition.
PERFORMANCE
Heated air is circulated over the load by fans, located in each
of the two compartments. The heated air is distributed evenly
over the load, achieving convection heating. The upper
compartment is capable of holding 20 two-liter square flasks
or a quantity of blankets. Two adjustable shelves are provided
in the lower compartment which can hold 60 two-liter square
flasks or a quantity of blankets. Once the selected temperature
is attained, it will be controlled throughout within 10°F (5.5°C)
of the selected temperature. A full load of two-liter flasks in the
upper compartment will be heated to 110°F within 8 hours or
less. In the event of a power loss, once power is restored the
unit will indicate a power loss has occurred and resume its prepower loss state.
CONSTRUCTION
The cabinet unit is double walled, type 304 stainless steel
construction. Insulation is provided to conserve energy and
insure that the exterior surface temperature does not exceed
120°F (49°C). Doors are tempered glass panes framed with
type 304 stainless steel. Temperature of glass panes does not
exceed 120°F.
*Applies only to Domestic U.S., Puerto Rico, and Canadian
shipments.
FEATURES
• “Look-In” glass doors provide visual inventory control
without opening doors
• Large useable internal volume for storage of solution bottles
and blankets
• Forced air convection heating is more effective and
eliminates the need for blanket racks
• Independent heat control provides flexibility of different
temperatures in each compartment
• Programmable for °F and °C display
• Supervisory “Lock-In” of temperature set point prevents
unauthorized changes of temperature
• Non-volatile memory protects temperature settings in the
event of a power loss
• An LED display will alert operator of an interruption or power
loss
• Overheat protection will shut the heaters off and provide an
audible alarm for the operators
• Adjustable shelves provided to accommodate various types
of loads
• Mounting options include floor mounted on a pedestal
base, wall mounted or recessed in a wall
OPTIONS
Six (6) foot power cord kit to replace standard hard wire
connection
Extra storage shelf - 24” deep
Getinge USA, Inc.
1777 East Henrietta Road
Rochester, New York 14623-3133
U.S.A.
Phone: (800) 475-9040
Fax:
(585) 272-5033
info@getingeusa.com www.getingeusa.com
THE GETINGE GROUP is a leading global provider of equipment and
systems that contribute to quality enhancement and cost efficiency within
healthcare and life sciences. Equipment, services and technologies are
supplied under the brands ARJO for patient hygiene, patient handling and
wound care, GETINGE for infection control and prevention within healthcare
and life science and MAQUET for surgical workplaces, cardiopulmonary
and critical care.
Getinge is constantly reviewing its products for improvements. Consequently, the actual products may differ slightly from the products pictured and described here.
L.E.D. displays provide the following information:
Control off
Chamber temperature
Power loss
Temperature set point
Overheat
Set point lock/unlock
Heater on
Fahrenheit or Celcius
Printed in U.S.A.
Control touch pads provide selection of:
Control on/off
Set point from 90°F (32°C) to 160°F (71°C)
Temperature display in °F or °C
Temperature set point “Lock-In”
Control components are mounted in the rear of the upper
compartment, permitting convenient service access from the
front of the unit. Similar provisions are made for easy removal
of fans, heater elements and control boards from each
compartment. Integral L.E.D. displays provide control and
heater-on information for easy serviceability.
ARJO, GETINGE and MAQUET are registered trademarks.
The control panel for each compartment is located
conveniently at eye level in the door frame of the compartment
being controlled.
SERVICING
DS5624 0208
CONTROLS