Pipe Mounts
Standoff Pipe Mount
Universal Tower Leg Clamp Kit
Standoff Pipe Mounts provide a
mounting pipe for a microwave dish
antenna or a Wireless Frame that
supports multiple antennas per sector. The Standoff Pipe Mounts help
avoid tower interference when a
Dish Antenna or Wireless Frame is
rotated to the desired azimuth.
The Standoff Pipe Mount installs
on vertical tower legs only, and requires either a Round-leg or Universal Tower Leg Clamp Kit for installation.
Universal Tower Leg Clamp
Kits fit round-legs from 1-3/4” to
8-5/8” outside diameter and
angle legs from 2-1/2” x
2-1/2” to 6” x 6”. Includes two
formed plate weldments and
four backing plates. Galvanized.
Standoff
Length
3'
2'
3'
Mounting
Length
2-3/8" O.D. x 4'
4-1/2" O.D. x 5'
4-1/2" O.D. x 5'
P/N
B 2210
B 1738
B 1739
Price
Description
P/N
145.00
150.00
170.00
Universal Tower Leg Adapter Kit
B3114
Price
150.00
Bogner
Mount
Bogner Mount
Bogner Mounts are designed for secure attachment of
larger antennas. Schedule 80 mounting pipe is 3-1/2" (4"
O.D.) X 48". Holds two BCR 12 or equivalent antennas.
Hardware included for mounting on towers with up to 3 1/2"
leg diameter. Approximate mount capacity would be 20 sq.
ft. distributed at the end of the mount considering 90 mph
basic windspeed with ½" radial ice at 200' elevation1 for all
Bogner Mounts.
Offset
Antenna Pipe
(4"O.D. x 48”)
Standard
1
Capacity of mount is provided for comparison purposes only and is valid for conditions specified. Call Valmont Communications for capacity on
your specific installation. Actual load capacity is dependent on basic windspeed, ice load, height of mount and other factors specific to individual
installations. All Valmont Communications antenna mounts are designed and manufactured in accordance with ANSI/TIA/EIA-222-F standards. See
page 12 for additional mount capacity information.
Description
P/N
6' Offset Bogner Mount Standard Duty (fits 12" to 60" face width lattice towers)
6' Bogner Mount Standard Duty (fits 12" to 60" face width lattice towers)
6' Bogner Mount Heavy Duty (fits 12" to 60" face width lattice towers)
12' Bogner Mount Standard Duty (fits 60" to 144" face width lattice towers)
Weight and Areas2
6' Bogner Mount Standard Duty
6' Bogner Mount Heavy Duty
12' Bogner Mount Standard Duty
850965
850962
850963
850964
Price
695.00
695.00
850.00
1,125.00
Weight, No Ice
Weight, 1/2" Ice
Area, No Ice
(lbs.)
(lbs.)
(CAAC)
(CAAC)
225
250
410
295
325
540
7.2 sq. ft.
8.2sq. ft.
16.0 sq. ft.
9.3 sq. ft.
9.9 sq. ft.
21.5 sq. ft.
Area, 1/2" Ice
2
All areas presented are computed in accordance with ANSI/TIA/EIA-222-F 1996. All areas do not include cross arms, pipe mounts or antenna
mounting pipes.
All of the above information, including but not limited to pricing, area and dimensions are subject to change without notice.
Communications Division, V
Valmont
almont Industries, Inc.
1545 Pidco Drive • Plymouth, Indiana • 46563-4005 USA
1- 87 7- 4 67- 4763
3575 25th S
Street
treet • Salem, Oregon • 97302-1
97302-1123
123 USA
1- 888
888--880
880--9191
17