The Komyo Kitagawa Gas Detector Tube
System is a cost-effective spot gas detector
sampling system, offering over 300 gas
detector tubes from Ammonia to Xylene.
Manufactured by
u
Accurate Reading in minutes
u
Portable, Safe, Easy to use
u
No Power Supply or Calibration Required
u
Low Cost Analysis
Gas Detector System
With over 50 years gas detection experience,
the Kitagawa System re-defines gas detection
by maximising accuracy, operation, safety and
efficiency.
Whenever - with no chemical
Kitagawa model AP-20
reagents to prepare or warm up time - it
includes pump and standard accessories
is ready for immediate use.
Wherever - light weight and
comprising:
u
carrying case
u
service kit
u
operating instructions
compact , Kitagawa’s system is easy to
carry and operate in virtually any
situation.
Whoever - the simple and intuitive
system design ensures easy straight forward
operation - all personnel can operate it with
ease.
Speedy - an accurate reading can
be obtained within minutes and multiple
sample points can be tested quickly and
efficiently.
Safety - as no electricity or heat is
required, tests can be taken without risk
of explosion, even in the most flammable
atmospheres.
Certified in conformity with the
European standard EN1231
Gas Detector Tubes
Kitagawa Gas Detector Tubes
The tubes are filled with an absorbant material and chemical reagent which, when in the
presence of the target gas, produces a colour stain along the tube.
A measurement scale is printed along on the tube to enable the user to easily match the
length of the colour stain to concentration of the gas present.
Applications are wide ranging and include health and safety, air pollution, flue gas monitoring
and indoor air quality. Industries utilising the Kitagawa tube system include:
Oil & Gas
Petrochemical
Marine
Environmental
Steel
Engineering
Mining
Acriculture
The Kitagawa system is also mutli-functional and can be used for measuring
disolved substances in solutions, compressed breathing air testing and even
blood screening in criminal investigations. Extra apparatus for the AP-20
pump offers remote testing in confined spaces and as no electricity is required,
there is no added risk of explosion.
The full list of tubes for gases that can measured can be downloaded from
our website at www.et.co.uk
It’s as easy as 1-2-3
1
Conect the detector tube to
the pump
2
Pull handle of the pump to take
sample of gas
3
Read off printed scale on tube
to establish gas concentration
Inorganic Gas/Organic Gas Qualitative Detector Tubes
The qualitative-analysis-detector tube system is composed of only two kinds of gas detector tubes
which contain different reagents at multiple sections in the tubes.
Only these tubes are able to detect various kinds of gases. Although the main purpose of this
system is qualitative analysis, simple quantitative analysis of the gases is also possible.
Inorganic Gas Qualitative Detector Tubes (Tube No. 131)
There are 12 inorganic gases including NH3, H2S & CI2 that can be detected. Please refer
to the Kitagawa catalogue for the full list.
Organic Gas Qualitative Detector Tubes (Tube No. 186B)
There are over 40 organic gases including Benzene, Butadiene, Acetone that can be
detected, please see the Kitagawa catalogue for the full list.
Model SFH -40 Hot-Air Probe
Where a hot sample is measured i.e emission gas from
a flue/stack or engine exhaust, this 40cm long probe is
available.
For further information on the Kitagawa Gas Detecter Tube System or
associated products, contact ET on:
+ 44 (0) 1453 733200 or sales@et.co.uk
www.et.co.uk