LED Dimming Driver
Hi-lume® A-Series LTE
Architectural Dimming
369543d
1 07.08.14
Hi-lume® A-Series Driver Overview
Forward-Phase Control
Hi-lume® A-Series Driver is a high-performance LED
driver that provides smooth, continuous 1% dimming
for virtually any LED fixture, whether it requires
constant-current or constant-voltage. It is the most
versatile LED driver offered today due to its
compatibility with a wide variety of LED arrays,
multiple form factors, and numerous control options.
Features
•Continuous, flicker-free dimming from 100% to 1%.
•Guaranteed compatibility with selected Maestro
Wireless®, RadioRA® 2, HomeWorks® QS, GRAFIK
Eye® QS, GRAFIK Systems™, Quantum®, and Stanza®
dimmers. Please see the chart at the end of this
document or contact Lutron for details regarding
compatible controls.
Hi-lume® A-Series, case type K
3.00 in (76 mm) W x 1.00 in (25 mm) H x
4.90 in (124 mm) L
•100% performance tested at factory.
•100% burned in at factory.
•Pulse width modulation (PWM) or constant-current
reduction (CCR) dimming methods available. See
Application Note #360 for details.
1% Dimming LED Driver
1% Pilote de DEL
WARNING: Shock hazard. May result in serious injury or death. Disconnect power
before servicing or installing.
ADVERTISSEMENT: Danger d’èlectrocution. Peut causer de graves lèsions ou dècès de la
personne. Couper l’alimentation au disjoncteur avant de procèder au montage ou à
l’entretien de l’installation.
c
LTEA4U1UMN-HC070
Input Entrèe
120 V
50 / 60 Hz
0,27 A
32 W Max
t
Output Sortie
38,0 V Max
0,70 A Max
Class 2
N
•
•
DL
Hi-lume®
A-Series
-V
+V
Solid 18 - 16 AWG
(0.75 - 1.5 mm2) wire only.
Utiliser un fil solide
18 - 16 AWG (0,75 - 1,5 mm2)
seulement.
Cu Al
0 27557
00196 0
Ver. A
5/16 in.
(8 mm)
To remove wire, insert screw driver into slot.
Pour enlever le fil, insérez un tourneviz dans
la fente.
Suitable for damp locations.
Pour les endroits emplacements.
Warranty void if unit opened.
Garantie annulée si ouvert.
Pats. / Brevets: 7,911,156; 8,466,628;
8,492,987; 8,492,988
USA / Canada 1.800.523.9466
+V N/C -V
lutron.com
Hi-lume® A-Series
P/N 50015684
N/C N/C
•FCC Part 15 compliant for commercial and residential
applications at 120 V ~.
N N/C DL
•UL recognized for United States and Canada.
N/C N/C N/C
•A rated lifetime of 50,000 hours @ t c =149 °F (65 °C).
Hi-lume® A-Series, case type M
1.18 in (30 mm) W x 1.00 in (25 mm) H x
14.25 in (362 mm) L
•RoHS Compliant
•For more information please go to:
www.lutron.com/HilumeLED
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
1
LED Dimming Driver
Hi-lume® A-Series LTE
Architectural Dimming
369543d
2 07.08.14
Specifications
Performance
•UL 8750 recognized.
•Dimming Range: 100% to 1%
•Class 2 output available.
•Operating Voltage: 120 V ~ at 50/60 Hz
(Forward Phase Control)
•Models available to meet LED Driver requirements
for Energy Star 1.1.
•A rated lifetime of 50,000 hours @ t c = 149 °F (65 °C).
Contact Lutron for derating information.
•Patented thermal foldback protection
•LEDs turn on to any dimmed level without going
to full brightness.
•Nonvolatile memory restores all driver settings after
power failure.
•Power Factor: > 0.90 at 40 W
•Total Harmonic Distortion (THD): < 20% at 40 W
•Inrush Current: < 2 A
•Inrush Current Limiting Circuitry: eliminates circuit
breaker tripping, switch arcing and relay failure.
•Open circuit protected
•Short circuit protected
•Turn-on time: ≤ 1 second
•PWM Dimming Frequency: 550 Hz
Driver Wiring & Mounting
•Driver is grounded by a mounting screw to the
grounded fixture (or by terminal connection on the
K case).
•Terminal blocks on the driver accept one solid wire
per terminal from 18 AWG to 16 AWG (0.75 mm( to
1.5 mm().
•Fixture must be grounded in accordance with local
and national electrical codes.
•Maximum driver-to-LED light engine wire length for
Constant-Current Drivers:
Maximum Lead Length
Wire Gauge
200 mA to
700 mA
710 mA to
1.50 A
1.51 A to
2.10 A
18 AWG (0.75 mm2)
30 ft (9 m)
15 ft (4.5 m)
10 ft (3 m)
16 AWG (1.5 mm2)
35 ft (10.5 m)
25 ft (7.5 m)
15 ft (4.5 m)
14 AWG (2.5 mm )
50 ft (15 m)
40 ft (12 m)
25 ft (7.5 m)
12 AWG (4.0 mm2)
100 ft (30 m)
60 ft (18 m)
40 ft (12 m)
2
Environmental
•Sound Rating: Class A.
•Relative Humidity: Maximum 90% non-condensing.
•Minimum operating ambient temperature (t a) =
32 °F (0 °C).
•Maximum driver-to-LED light engine wire length for
Constant-Voltage Drivers:
Maximum Lead Length
Wire Gauge
10 to 20 V-
20.5 to 40 V-
40.5 to 60 V-
18 AWG (0.75 mm )
10 ft (3 m)
15 ft (4.5 m)
30 ft (9 m)
16 AWG (1.5 mm2)
15 ft (4.5 m)
25 ft (7.5 m)
50 ft (15 m)
14 AWG (2.5 mm )
25 ft (7.5 m)
40 ft (12 m)
75 ft (22.5 m)
12 AWG (4.0 mm )
40 ft (12 m)
60 ft (18 m)
100 ft (30 m)
2
Regulatory Approvals
•Meets ANSI C62.41 category A surge protection
standards up to and including 4 kV.
2
2
•FCC Part 15 compliant for commercial and
residential applications.
•Manufacturing facilities employ ESD reduction
practices that comply with the requirements of
ANSI/ESD S20.20.
•Lutron® Quality Systems registered to ISO
9001.2008.
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
2
LED Dimming Driver
Hi-lume® A-Series LTE
Architectural Dimming
369543d
3 07.08.14
How to Build a Model Number: Hi-lume® A-Series
LTE A 4U1U _ _ - _ _ _ _ _
Case Size:
example: LTEA4U1UKS-HC070
For further assistance selecting your model
number, contact our LED Center of Excellence
at 1.877.346.5338 or LEDs@lutron.com
K = Compact
M = Stick
Current Level (for Constant-Current):
020 = 0.20 A; 021 = 0.21 A…070 = 0.70 A…210 = 2.10 A
Voltage Level (for Constant-Voltage):
100 = 10.0 V; 105 = 10.5 V…600 = 60.0 V
Case Style:
S = Studded
(K case only)
N = Non-Studded
Driver Output:
C = Constant-current driver
with pulse width modulation (PWM) dimming
A = Constant-current driver
with constant-current reduction (CCR) dimming
V = Constant-voltage driver
with pulse width modulation (PWM) dimming
LED Load Output Range (see the following pages for more detail):
Class 2 Constant-Voltage
Class 2 Constant-Current
A = 10.0 V–12.0 V
E = 0.20 A–0.50 A 30 V–54 V
Isolated Non-Class 2
Constant-Current
B = 12.5 V–20.0 V
F = 0.51 A–1.00 A 30 V–54 V
Y = 0.20 A–0.50 A 30 V–60 V
C = 20.5 V–24.0 V
G = 0.20 A–0.70 A 8 V–20 V
Z = 0.51 A–1.00 A 30 V–60 V
D = 24.5 V–38.0 V
H = 0.20 A–0.70 A 15 V–38 V
I = 0.71 A–1.05 A 8 V–20 V
Isolated Non-Class 2
Constant-Voltage
J = 0.71 A–1.05 A 15 V–38 V
X = 38.5 V–60.0 V
L = 1.06 A–1.50 A 15 V–38 V
K = 1.06 A–1.50 A 8 V–20 V
M = 1.51 A–2.10 A 8 V – 20 V
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
3
LED Dimming Driver
Hi-lume® A-Series LTE
Architectural Dimming
369543d
4 07.08.14
“A” Output Range, Voltage Driver Models
Driver Type
Output Dimming Method
Output Voltage
Output Current
Output Power
Constant-Voltage Driver
(Class 2)
Pulse Width Modulation (PWM)
10.0 – 12.0 V PWM
0.42 – 3.3 A
5 – 40 W
Standards Recognition
Voltage Driver Operation Range:
Output Current vs. Output Voltage
Output Current vs. Output Voltage
3.5
3.5
3.3
3.3
Output Power vs. Output Voltage
Output Power vs. Output Voltage
40
40
3
3
2
2
Output
OutputPower
Power(W)
(W)
Output
OutputCurrent
Current(A)
(A)
2.5
2.5
A
A
1.5
1.5
1
1
30
30
25
25
A
A
20
20
15
15
10
10
0.5
0.5
0
0
3.3 A Max.
3.3 A Max.
35
35
5
5
5 W Min.
5 W Min.
0
0
10 12
10 12
20
20
30
30
40
40
50
50
0
0
60
60
0
0
Output Voltage (V)
Output Voltage (V)
10 12
10 12
20
20
30
30
40
40
50
50
60
60
Output Voltage (V)
Output Voltage (V)
Typical Performance Specifications:
Parameter
Value
Test Conditions
t a = 25 °C,
12.0 V 40 W load,
Max. Light Output,
K enclosure
120 V~ without a dimmer
Input Current
400 mA
Power Factor
0.98
THD
16%
Driver Efficiency
79%
Driver Efficiency vs. Output Power at 120 V ~
Driver Efficiency vs. Output Power at 120 V ~
90
90
85
85
Efficiency
Efficiency(%)
(%)
80
80
12.0 V
10.0 V 12.0 V
10.0 V
75
75
70
70
65
65
60
60
5
5
10
10
15
15
20
20
25
25
30
30
35
35
40
40
Output Power (W)
Output Power (W)
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
4
LED Dimming Driver
Hi-lume® A-Series LTE
Architectural Dimming
369543d
5 07.08.14
“B” Output Range, Voltage Driver Models
Driver Type
Output Dimming Method
Output Voltage
Output Current
Output Power
Constant-Voltage Driver
(Class 2)
Pulse Width Modulation (PWM)
12.5 – 20.0 V PWM
0.25 – 3.2 A
5 – 40 W
Standards Recognition
Voltage Driver Operation Range:
Output Current vs. Output Voltage
Output Current vs. Output Voltage
3.5
3.5
40
40
3
3
40 W Max.
40 W Max.
35
35
Output
OutputPower
Power(W)
(W)
2.5
2.5
Output
OutputCurrent
Current(A)
(A)
Output Power vs. Output Voltage
Output Power vs. Output Voltage
2
2
1.5
1.5
B
B
1
1
25
25
B
B
20
20
15
15
10
10
0.5
0.5
0
0
30
30
5
5
5 W Min.
5 W Min.
0
0
10 12.5
10 12.5
20
20
30
30
40
40
50
50
0
0
60
60
0
0
Output Voltage (V)
Output Voltage (V)
10 12.5
10 12.5
20
20
30
30
40
40
50
50
60
60
Output Voltage (V)
Output Voltage (V)
Typical Performance Specifications:
Parameter
Value
Test Conditions
t a = 25 °C,
20.0 V 40 W load,
Max. Light Output,
K enclosure
120 V~ without a dimmer
Input Current
400 mA
Power Factor
0.99
THD
9%
Driver Efficiency
83%
Driver Efficiency vs. Output Power at 120 V ~
Driver Efficiency vs. Output Power at 120 V ~
90
90
85
85
20.0 V
20.0 V
18.0 V
18.0 V
Efficiency
Efficiency(%)
(%)
80
80
12.5 V
12.5 V
75
75
70
70
65
65
60
60
5
5
10
10
15
15
20
20
25
25
30
30
35
35
40
40
Output Power (W)
Output Power (W)
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
5
LED Dimming Driver
Hi-lume® A-Series LTE
Architectural Dimming
369543d
6 07.08.14
“C” Output Range, Voltage Driver Models
Driver Type
Output Dimming Method
Output Voltage
Output Current
Output Power
Constant-Voltage Driver
(Class 2)
Pulse Width Modulation (PWM)
20.5 – 24.0 V PWM
1.95 – 0.21 A
5 – 40 W
Standards Recognition
Voltage Driver Operation Range:
Output Current vs. Output Voltage
Output Current vs. Output Voltage
3.5
3.5
Output Power vs. Output Voltage
Output Power vs. Output Voltage
40
40
3
3
35
35
40 W Max.
40 W Max.
Output
OutputPower
Power(W)
(W)
Output
OutputCurrent
Current(A)
(A)
2.5
2.5
2
2
1.5
1.5
C
C
1
1
25
25
C
C
20
20
15
15
10
10
0.5
0.5
0
0
30
30
5
5
5 W Min.
5 W Min.
0
0
20.5 24
20.5 24
10
10
30
30
40
40
50
50
0
0
60
60
0
0
Output Voltage (V)
Output Voltage (V)
10
10
20.5 24
20.5 24
30
30
40
40
50
50
60
60
Output Voltage (V)
Output Voltage (V)
Typical Performance Specifications:
Parameter
Value
Test Conditions
t a = 25 °C,
24.0 V 40 W load,
Max. Light Output,
K enclosure
120 V~ without a dimmer
Input Current
380 mA
Power Factor
0.99
THD
10%
Driver Efficiency
84%
Driver Efficiency vs. Output Power at 120 V ~
Driver Efficiency vs. Output Power at 120 V ~
90
90
85
85
24 V
24 V
Efficiency
Efficiency(%)
(%)
80
80
20.5 V
20.5 V
75
75
70
70
65
65
60
60
5
5
10
10
15
15
20
20
25
25
30
30
35
35
40
40
Output Power (W)
Output Power (W)
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
6
LED Dimming Driver
Hi-lume® A-Series LTE
Architectural Dimming
369543d
7 07.08.14
“D” Output Range, Voltage Driver Models
Driver Type
Output Dimming Method
Output Voltage
Output Current
Output Power
Constant-Voltage Driver
(Class 2)
Pulse Width Modulation (PWM)
24.5 – 38.0 V PWM
0.13 – 1.63 A
5 – 40 W
Standards Recognition
Voltage Driver Operation Range:
Output Current vs. Output Voltage
Output Current vs. Output Voltage
3.5
3.5
Output Power vs. Output Voltage
Output Power vs. Output Voltage
40
40
3
3
35
35
Output
OutputPower
Power(W)
(W)
Output
OutputCurrent
Current(A)
(A)
2.5
2.5
2
2
40 W Max.
40 W Max.
1.5
1.5
1
1
D
D
0.5
0.5
0
0
10
10
20
20
25
25
D
D
20
20
15
15
10
10
5
5
5 W Min.
5 W Min.
0
0
30
30
24.5
24.5
30
30
38 40
38 40
50
50
0
0
60
60
0
0
Output Voltage (V)
Output Voltage (V)
10
10
20
20
24.5
24.5
30
30
38 40
38 40
50
50
60
60
Output Voltage (V)
Output Voltage (V)
Typical Performance Specifications:
Parameter
Value
Test Conditions
t a = 25 °C,
38.0 V 40 W load,
Max. Light Output,
K enclosure
120 V~ without a dimmer
Input Current
380 mA
Power Factor
0.99
THD
7%
Driver Efficiency
86%
Driver Efficiency vs. Output Power at 120 V ~
Driver Efficiency vs. Output Power at 120 V ~
90
90
36 V
36 V
38 V
38 V
85
85
24.5 V
24.5 V
Efficiency
Efficiency(%)
(%)
80
80
75
75
70
70
65
65
60
60
5
5
10
10
15
15
20
20
25
25
30
30
35
35
40
40
Output Power (W)
Output Power (W)
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
7
LED Dimming Driver
Hi-lume® A-Series LTE
Architectural Dimming
369543d
8 07.08.14
“E” Output Range, Current Driver Models
Driver Type
Output Dimming Method
Output Voltage
Output Current
Output Power
Constant-Current Driver
(Class 2)
Constant-Current Reduction (CCR)
30 – 54 V -
0.20 – 0.50 A
6 – 27 W
Standards Recognition
Current Driver Operation Range:
Output Power vs. Output Current
Output Power vs. Output Current
60
60
40
40
54
54
50
50
35
35
30
30
E
E
40
40
Output
OutputPower
Power(W)
(W)
Output
OutputVoltage
Voltage(V)(V)
Output Voltage vs. Output Current
Output Voltage vs. Output Current
30
30
20
20
20
20
E
E
15
15
10
10
10
10
0
0
54 V Max.
54 V Max.
25
25
30 V Min.
30 V Min.
5
5
0
0
0.20 0.35 0.50
0.20 0.35 0.50
0.7
0.7
1.05
1.05
1.4
1.4
0
0
2.1
2.1
0
0
0.20 0.35 0.50
0.20 0.35 0.50
Output Current (A)
Output Current (A)
0.7
0.7
1.05
1.05
1.4
1.4
1.75
1.75
2.1
2.1
Output Current (A)
Output Current (A)
Typical Performance Specifications:
Parameter
Value
Test Conditions
t a = 25 °C,
0.50 A 27 W load,
Max. Light Output,
K enclosure
120 V~ without a dimmer
Input Current
270 mA
Power Factor
0.99
THD
10%
Driver Efficiency
83%
Driver Efficiency vs. Output Power at 120 V ~
Driver Efficiency vs. Output Power at 120 V ~
90
90
85
85
80
80
Efficiency
Efficiency(%)
(%)
0.50 A
0.50 A
0.35 A
0.35 A
75
75
0.20 A
0.20 A
70
70
65
65
60
60
6
6
9
9
12
12
15
15
18
18
21
21
24
24
27
27
Output Power (W)
Output Power (W)
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
8
LED Dimming Driver
Hi-lume® A-Series LTE
Architectural Dimming
369543d
9 07.08.14
“F” Output Range, Current Driver Models
Driver Type
Output Dimming Method
Output Voltage
Output Current
Output Power
Constant-Current Driver
(Class 2)
Constant-Current Reduction (CCR)
30 – 54 V -
0.51 – 1.00 A
15 – 40 W
Standards Recognition
Current Driver Operation Range:
Output Voltage vs. Output Current
Output Voltage vs. Output Current
60
60
40
40
40 W Max.
40 W Max.
54
54
50
50
30
30
F
F
40
40
30
30
20
20
F
F
25
25
20
20
30 V Min.
30 V Min.
15
15
10
10
10
10
0
0
54 V Max.
54 V Max.
35
35
Output
OutputPower
Power(W)
(W)
Output
OutputVoltage
Voltage(V)(V)
Output Power vs. Output Current
Output Power vs. Output Current
5
5
0
0
0.51
0.51
0.35
0.35
0.7
0.7
1.00
1.00
1.4
1.4
1.75
1.75
0
0
2.1
2.1
0
0
Output Current (A)
Output Current (A)
0.35 0.51
0.35 0.51
0.7
0.7
1.00
1.00
1.4
1.4
1.75
1.75
2.1
2.1
Output Current (A)
Output Current (A)
Typical Performance Specifications:
Parameter
Value
Test Conditions
t a = 25 °C,
1.00 A 40 W load,
Max. Light Output,
K enclosure
120 V~ without a dimmer
Input Current
400 mA
Power Factor
0.99
THD
7%
Driver Efficiency
82%
Driver Efficiency vs. Output Power at 120 V ~
Driver Efficiency vs. Output Power at 120 V ~
90
90
85
85
0.70 A
0.70 A
Efficiency
Efficiency(%)
(%)
80
80
1.00 A
1.00 A
0.51 A
0.51 A
75
75
70
70
65
65
60
60
15
15
20
20
25
25
30
30
35
35
40
40
Output Power (W)
Output Power (W)
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
9
LED Dimming Driver
Hi-lume® A-Series LTE
Architectural Dimming
369543d
10 07.08.14
“G” Output Range, Current Driver Models
Driver Type
Output Dimming Method
Output Voltage
Output Current
Output Power
Constant-Current Driver
(Class 2)
Pulse Width Modulation (PWM)
8 – 20 V PWM
0.20 – 0.70 A
2 – 14 W
Constant-Current Reduction (CCR)
8 – 20 V -
Standards Recognition
Current Driver Operation Range:
Output Voltage vs. Output Current
Output Voltage vs. Output Current
Output Power vs. Output Current
Output Power vs. Output Current
40
40
60
60
35
35
30
30
40
40
Output
OutputPower
Power(W)
(W)
Output
OutputVoltage
Voltage(V)(V)
50
50
30
30
20
20
G
G
10
10
8
8
25
25
20
20
20 V Max.
20 V Max.
15
15
10
10
G
G
5
5
0
0
0.20
0.20
0.35
0.35
0.7
0.7
1.05
1.05
1.4
1.4
1.75
1.75
0
0
2.1
2.1
8 V Min.
8 V Min.
0
0
0.20 0.35
0.20 0.35
Output Current (A)
Output Current (A)
0.7
0.7
1.05
1.05
1.4
1.4
1.75
1.75
2.1
2.1
Output Current (A)
Output Current (A)
Typical Performance Specifications:
Parameter
Value
Test Conditions
t a = 25 °C,
0.70 A 14 W load,
Max. Light Output,
K enclosure
120 V~ without a dimmer
Input Current
150 mA
Power Factor
0.99
THD
12%
Driver Efficiency
76%
Driver Efficiency vs. Output Power at 120 V ~
Driver Efficiency vs. Output Power at 120 V ~
80
80
0.70 A
0.70 A
75
75
0.50 A
0.50 A
Efficiency
Efficiency(%)
(%)
70
70
0.35 A
0.35 A
65
65
0.20 A
0.20 A
60
60
55
55
50
50
45
45
2
2
4
4
6
6
8
8
10
10
12
12
14
14
Output Power (W)
Output Power (W)
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
10
LED Dimming Driver
Hi-lume® A-Series LTE
Architectural Dimming
369543d
11 07.08.14
“H” Output Range, Current Driver Models
Driver Type
Output Dimming Method
Output Voltage
Output Current
Output Power
Constant-Current Driver
(Class 2)
Pulse Width Modulation (PWM)
15 – 38 V PWM
0.20 – 0.70 A
3 – 26 W
Constant-Current Reduction (CCR)
15 – 38 V -
Standards Recognition
Current Driver Operation Range:
Output Voltage vs. Output Current
Output Voltage vs. Output Current
Output Power vs. Output Current
Output Power vs. Output Current
40
40
60
60
35
35
30
30
40
40
38
38
30
30
Output
OutputPower
Power(W)
(W)
Output
OutputVoltage
Voltage(V)(V)
50
50
H
H
20
20
15
15
10
10
0
0
25
25
38 V Max.
38 V Max.
20
20
15
15
H
H
10
10
5
5
0
0
0.20
0.20
0.35
0.35
0.7
0.7
1.05
1.05
1.4
1.4
1.75
1.75
2.1
2.1
0
0
15 V Min.
15 V Min.
0
0
0.20
0.20
Output Current (A)
Output Current (A)
0.35
0.35
0.7
0.7
1.05
1.05
1.4
1.4
1.75
1.75
2.1
2.1
Output Current (A)
Output Current (A)
Typical Performance Specifications:
Parameter
Value
Test Conditions
t a = 25 °C,
0.70 A 26 W load,
Max. Light Output,
K enclosure
120 V~ without a dimmer
Input Current
270 mA
Power Factor
0.99
THD
8%
Driver Efficiency
83%
Driver Efficiency vs. Output Power at 120 V ~
Driver Efficiency vs. Output Power at 120 V ~
90
90
85
85
Efficiency
Efficiency(%)
(%)
0.70 A
0.70 A
0.50 A
0.50 A
80
80
0.35 A
0.35 A
75
75
70
70
0.20 A
0.20 A
65
65
60
60
3
3
8
8
13
13
18
18
23
23
Output Power (W)
Output Power (W)
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
11
LED Dimming Driver
Hi-lume® A-Series LTE
Architectural Dimming
369543d
12 07.08.14
“I” Output Range, Current Driver Models
Driver Type
Output Dimming Method
Output Voltage
Output Current
Output Power
Constant-Current Driver
(Class 2)
Pulse Width Modulation (PWM)
8 – 20 V PWM
0.71 – 1.05 A
6 – 21 W
Constant-Current Reduction (CCR)
8 – 20 V -
Standards Recognition
Current Driver Operation Range:
Output Voltage vs. Output Current
Output Voltage vs. Output Current
Output Power vs. Output Current
Output Power vs. Output Current
40
40
60
60
35
35
30
30
40
40
Output
OutputPower
Power(W)
(W)
Output
OutputVoltage
Voltage(V)(V)
50
50
30
30
20
20
II
10
10
8
8
0
0
20 V Max.
20 V Max.
25
25
20
20
15
15
II
10
10
5
5
0
0
0.35
0.35
0.71
0.71
1.05
1.05
1.4
1.4
1.75
1.75
0
0
2.1
2.1
8 V Min.
8 V Min.
0
0
0.20 0.35
0.20 0.35
Output Current (A)
Output Current (A)
0.7
0.7
1.05
1.05
1.4
1.4
1.75
1.75
2.1
2.1
Output Current (A)
Output Current (A)
Typical Performance Specifications:
Parameter
Value
Test Conditions
t a = 25 °C,
1.05 A 21 W load,
Max. Light Output,
K enclosure
120 V~ without a dimmer
Input Current
220 mA
Power Factor
0.99
THD
11%
Driver Efficiency
79%
Driver Efficiency vs. Output Power at 120 V ~
Driver Efficiency vs. Output Power at 120 V ~
90
90
85
85
Efficiency
Efficiency(%)
(%)
80
80
1.05 A
1.05 A
0.71 A
0.71 A
75
75
70
70
65
65
60
60
6
6
9
9
12
12
15
15
18
18
21
21
Output Power (W)
Output Power (W)
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
12
LED Dimming Driver
Hi-lume® A-Series LTE
Architectural Dimming
369543d
13 07.08.14
“J” Output Range, Current Driver Models
Driver Type
Output Dimming Method
Output Voltage
Output Current
Output Power
Constant-Current Driver
(Class 2)
Pulse Width Modulation (PWM)
15 – 38 V PWM
0.71 – 1.05 A
11 – 40 W
Constant-Current Reduction (CCR)
15 – 38 V -
Standards Recognition
Current Driver Operation Range:
Output Voltage vs. Output Current
Output Voltage vs. Output Current
Output Power vs. Output Current
Output Power vs. Output Current
40
40
60
60
30
30
40
40
38
38
30
30
Output
OutputPower
Power(W)
(W)
Output
OutputVoltage
Voltage(V)(V)
50
50
J
J
20
20
15
15
10
10
0
0
38 V Max.
38 V Max.
35
35
25
25
J
J
20
20
15
15
10
10
5
5
0
0
0.71
0.71
0.35
0.35
1.05
1.05
1.4
1.4
1.75
1.75
0
0
2.1
2.1
15 V Min.
15 V Min.
0
0
Output Current (A)
Output Current (A)
0.35
0.35
0.71
0.71
1.05
1.05
1.4
1.4
1.75
1.75
2.1
2.1
Output Current (A)
Output Current (A)
Typical Performance Specifications:
Parameter
Value
Test Conditions
t a = 25 °C,
1.05 A 40 W load,
Max. Light Output,
K enclosure
120 V~ without a dimmer
Input Current
400 mA
Power Factor
0.99
THD
7%
Driver Efficiency
84%
Driver Efficiency vs. Output Power at 120 V ~
Driver Efficiency vs. Output Power at 120 V ~
90
90
85
85
Efficiency
Efficiency(%)
(%)
80
80
1.05 A
1.05 A
75
75
0.71 A
0.71 A
70
70
65
65
60
60
10
10
15
15
20
20
25
25
30
30
35
35
40
40
Output Power (W)
Output Power (W)
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
13
LED Dimming Driver
Hi-lume® A-Series LTE
Architectural Dimming
369543d
14 07.08.14
“K” Output Range, Current Driver Models
Driver Type
Output Dimming Method
Output Voltage
Output Current
Output Power
Constant-Current Driver
(Class 2)
Pulse Width Modulation (PWM)
8 – 20 V PWM
1.06 – 1.50 A
9 – 30 W
Constant-Current Reduction (CCR)
8 – 20 V -
Standards Recognition
Current Driver Operation Range:
Output Voltage vs. Output Current
Output Voltage vs. Output Current
Output Power vs. Output Current
Output Power vs. Output Current
40
40
60
60
35
35
40
40
30
30
20
20
K
K
10
10
8
8
0
0
20 V Max.
20 V Max.
30
30
Output
OutputPower
Power(W)
(W)
Output
OutputVoltage
Voltage(V)(V)
50
50
25
25
20
20
K
K
15
15
10
10
8 V Min.
8 V Min.
5
5
0
0
0.7
0.7
0.35
0.35
1.06
1.06
1.4 1.5
1.4 1.5
1.75
1.75
2.1
2.1
0
0
0
0
Output Current (A)
Output Current (A)
0.35
0.35
0.7
0.7
1.05
1.05
1.4 1.5
1.4 1.5
1.75
1.75
2.1
2.1
Output Current (A)
Output Current (A)
Typical Performance Specifications:
Parameter
Value
Test Conditions
t a = 25 °C,
1.50 A 30 W load,
Max. Light Output,
K enclosure
120 V~ without a dimmer
Input Current
320 mA
Power Factor
0.99
THD
12%
Driver Efficiency
79%
Driver Efficiency vs. Output Power at 120 V ~
Driver Efficiency vs. Output Power at 120 V ~
90
90
85
85
1.20 A
1.20 A
Efficiency
Efficiency(%)
(%)
80
80
1.50 A
1.50 A
1.06 A
1.06 A
75
75
70
70
65
65
60
60
9
9
11
11
13
13
15
15
17
17
19
19
21
21
23
23
25
25
27
27
29
29
Output Power (W)
Output Power (W)
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
14
LED Dimming Driver
Hi-lume® A-Series LTE
Architectural Dimming
369543d
15 07.08.14
“L” Output Range, Current Driver Models
Driver Type
Output Dimming Method
Output Voltage
Output Current
Output Power
Constant-Current Driver
(Class 2)
Pulse Width Modulation (PWM)
15 – 38 V PWM
1.06 – 1.50 A
16 – 40 W
Constant-Current Reduction (CCR)
15 – 38 V -
Standards Recognition
Current Driver Operation Range:
Output Voltage vs. Output Current
Output Voltage vs. Output Current
Output Power vs. Output Current
Output Power vs. Output Current
40
40
60
60
35
35
30
30
40
40
Output
OutputPower
Power(W)
(W)
Output
OutputVoltage
Voltage(V)(V)
50
50
40 W Max.
40 W Max.
30
30
L
L
20
20
15
15
10
10
0
0
L
L
25
25
20
20
15 V Min.
15 V Min.
15
15
10
10
5
5
0
0
0.7
0.7
0.35
0.35
1.06
1.06
1.4 1.5
1.4 1.5
1.75
1.75
0
0
2.1
2.1
0
0
Output Current (A)
Output Current (A)
0.35
0.35
0.7
0.7
1.05
1.05
1.4 1.5
1.4 1.5
1.75
1.75
2.1
2.1
Output Current (A)
Output Current (A)
Typical Performance Specifications:
Parameter
Value
Test Conditions
t a = 25 °C,
1.50 A 40 W load,
Max. Light Output,
K enclosure
120 V~ without a dimmer
Input Current
400 mA
Power Factor
0.99
THD
9%
Driver Efficiency
82%
Driver Efficiency vs. Output Power at 120 V ~
Driver Efficiency vs. Output Power at 120 V ~
90
90
85
85
Efficiency
Efficiency(%)
(%)
80
80
1.20 A
1.20 A
1.06 A
75 1.06 A
75
1.50 A
1.50 A
70
70
65
65
60
60
16
16
19
19
22
22
25
25
28
28
31
31
34
34
37
37
40
40
Output Power (W)
Output Power (W)
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
15
LED Dimming Driver
Hi-lume® A-Series LTE
Architectural Dimming
369543d
16 07.08.14
“M” Output Range, Current Driver Models
Driver Type
Output Dimming Method
Output Voltage
Output Current
Output Power
Constant-Current Driver
(Class 2)
Pulse Width Modulation (PWM)
8 – 19.9 V PWM
1.51 – 2.10 A
12 – 30 W
Constant-Current Reduction (CCR)
8 – 19.9 V -
Standards Recognition
Current Driver Operation Range:
Output Voltage vs. Output Current
Output Voltage vs. Output Current
Output Power vs. Output Current
Output Power vs. Output Current
40
40
60
60
35
35
30
30
40
40
30
30
Output
OutputPower
Power(W)
(W)
Output
OutputVoltage
Voltage(V)(V)
50
50
30 W Max.
30 W Max.
20
20
0
0
0
0
0.35
0.35
0.7
0.7
1.05
1.05
1.4 1.51
1.4 1.51
M
M
20
20
15
15
10
10
M
M
10
10
8
8
25
25
8 V Min.
8 V Min.
5
5
1.75
1.75
0
0
2.1
2.1
0
0
Output Current (A)
Output Current (A)
0.35
0.35
0.7
0.7
1.05
1.05
1.4 1.51
1.4 1.51
1.75
1.75
2.1
2.1
Output Current (A)
Output Current (A)
Typical Performance Specifications:
Parameter
Value
Test Conditions
t a = 25 °C,
2.10 A 30 W load,
Max. Light Output,
K enclosure
120 V~ without a dimmer
Input Current
310 mA
Power Factor
0.99
THD
14%
Driver Efficiency
76%
Driver Efficiency vs. Output Power at 120 V ~
Driver Efficiency vs. Output Power at 120 V ~
90
90
85
85
Efficiency
Efficiency(%)
(%)
80
80
75
75
70
70
1.51 A
1.51 A
1.75 A
1.75 A
2.10 A
2.10 A
65
65
60
60
12
12
14
14
16
16
18
18
20
20
22
22
24
24
26
26
28
28
30
30
Output Power (W)
Output Power (W)
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
16
LED Dimming Driver
Hi-lume® A-Series LTE
Architectural Dimming
369543d
17 07.08.14
“X” Output Range, Voltage Driver Models
Driver Type
Output Dimming Method
Output Voltage
Output Current
Output Power
Constant-Voltage Driver
(Isolated, Non-Class 2)
Pulse Width Modulation (PWM)
38.5 – 60.0 V PWM
0.08 – 1.04 A
5 – 40 W
Standards Recognition
Voltage Driver Operation Range:
Output Current vs. Output Voltage
Output Current vs. Output Voltage
3.5
3.5
Output Power vs. Output Voltage
Output Power vs. Output Voltage
40
40
35
35
2.5
2.5
30
30
Output
OutputPower
Power(W)
(W)
Output
OutputCurrent
Current(A)
(A)
3
3
2
2
1.5
1.5
40 W Max.
40 W Max.
1
1
X
X
20
20
15
15
10
10
0.5
0.5
0
0
25
25
5 W Min.
5 W Min.
0
0
10
10
20
20
30
30
5
5
X
X
38.5 40
38.5 40
50
50
0
0
60
60
0
0
10
10
20
20
30
30
38.5 40
38.5 40
50
50
60
60
Output Voltage (V)
Output Voltage (V)
Output Voltage (V)
Output Voltage (V)
Typical Performance Specifications:
Parameter
Value
Test Conditions
t a = 25 °C,
60.0 V 40 W load,
Max. Light Output,
K enclosure
120 V~ without a dimmer
Input Current
390 mA
Power Factor
0.99
THD
10%
Driver Efficiency
86%
Driver Efficiency vs. Output Power at 120 V ~
Driver Efficiency vs. Output Power at 120 V ~
90
90
85
85
38.5 V
38.5 V
60.0 V
60.0 V
Efficiency
Efficiency(%)
(%)
80
80
48.0 V
48.0 V
75
75
70
70
65
65
60
60
5
5
10
10
15
15
20
20
25
25
30
30
35
35
40
40
Output Power (W)
Output Power (W)
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
17
LED Dimming Driver
Hi-lume® A-Series LTE
Architectural Dimming
369543d
18 07.08.14
“Y” Output Range, Current Driver Models
Driver Type
Output Dimming Method
Output Voltage
Output Current
Output Power
Constant-Current Driver
(Isolated, Non-Class 2)
Pulse Width Modulation (PWM)
30 – 60 V PWM
0.20 – 0.50 A
6 – 30 W
Constant-Current Reduction (CCR)
30 – 60 V -
Standards Recognition
Current Driver Operation Range:
Output Voltage vs. Output Current
Output Voltage vs. Output Current
Output Power vs. Output Current
Output Power vs. Output Current
40
40
60
60
35
35
30
30
Y
Y
40
40
Output
OutputPower
Power(W)
(W)
Output
OutputVoltage
Voltage(V)(V)
50
50
30
30
20
20
20
20
Y
Y
15
15
10
10
10
10
0
0
60 V Max.
60 V Max.
25
25
30 V Min.
30 V Min.
5
5
0
0
0
0
0.20
0.20
0.35 0.50
0.35 0.50
0.7
0.7
1.05
1.05
1.4
1.4
1.75
1.75
2.1
2.1
0
0
0.20
0.20
Output Current (A)
Output Current (A)
0.35 0.50
0.35 0.50
0.7
0.7
1.05
1.05
1.4
1.4
1.75
1.75
2.1
2.1
Output Current (A)
Output Current (A)
Typical Performance Specifications:
Parameter
Value
Test Conditions
t a = 25 °C,
0.50 A 30 W load,
Max. Light Output,
K enclosure
120 V~ without a dimmer
Input Current
300 mA
Power Factor
0.99
THD
11%
Driver Efficiency
84%
Driver Efficiency vs. Output Power at 120 V ~
Driver Efficiency vs. Output Power at 120 V ~
90
90
85
85
0.50 A
0.50 A
Efficiency
Efficiency(%)
(%)
80
80
0.35 A
0.35 A
75
75
0.20 A
0.20 A
70
70
65
65
60
60
6
6
9
9
12
12
15
15
18
18
21
21
24
24
27
27
30
30
Output Power (W)
Output Power (W)
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
18
LED Dimming Driver
Hi-lume® A-Series LTE
Architectural Dimming
369543d
19 07.08.14
“Z” Output Range, Current Driver Models
Driver Type
Output Dimming Method
Output Voltage
Output Current
Output Power
Constant-Current Driver
(Isolated, Non-Class 2)
Pulse Width Modulation (PWM)
30 – 60 V PWM
0.51 – 1.00 A
16 – 40 W
Constant-Current Reduction (CCR)
30 – 60 V -
Standards Recognition
Current Driver Operation Range:
Output Voltage vs. Output Current
Output Voltage vs. Output Current
60
60
Output Power vs. Output Current
Output Power vs. Output Current
40
40
40 W Max.
40 W Max.
30
30
20
20
25
25
30 V Min.
30 V Min.
20
20
15
15
10
10
10
10
0
0
Z
Z
30
30
Z
Z
Output
OutputPower
Power(W)
(W)
Output
OutputVoltage
Voltage(V)(V)
50
50
40
40
60 V Max.
60 V Max.
35
35
5
5
0
0
0.35 0.51
0.35 0.51
0.7
0.7
1.00
1.00
1.4
1.4
1.75
1.75
0
0
2.1
2.1
0
0
Output Current (A)
Output Current (A)
0.35 0.51
0.35 0.51
0.7
0.7
1.00
1.00
1.4
1.4
1.75
1.75
2.1
2.1
Output Current (A)
Output Current (A)
Typical Performance Specifications:
Parameter
Value
Test Conditions
t a = 25 °C,
1.00 A 40 W load,
Max. Light Output,
K enclosure
120 V~ without a dimmer
Input Current
400 mA
Power Factor
0.99
THD
8%
Driver Efficiency
83%
Driver Efficiency vs. Output Power at 120 V ~
Driver Efficiency vs. Output Power at 120 V ~
90
90
85
85
Efficiency
Efficiency(%)
(%)
0.70 A
0.70 A
0.51 A
0.51 A
80
80
1.00 A
1.00 A
75
75
70
70
65
65
60
60
15
15
20
20
25
25
30
30
35
35
40
40
Output Power (W)
Output Power (W)
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
19
LED Dimming Driver
Hi-lume® A-Series LTE
Architectural Dimming
369543d
20 07.08.14
K Case: Case Dimensions
C
J*
A
I*
H*
B
E D
F
G
K Case: Connector Location Dimensions
K*
L
O
P
K*
Q
8-32
Threaded
Studs*
L
M
N
Q
A
B
C
D
E
4.20 in (107 mm)
1.00 in (25 mm)
3.00 in (76 mm)
4.90 in (124 mm)
4.60 in (117 mm)
(mounting center)
F
G
H* I* J*
1.42 in (36 mm)
1.99 in (51 mm)
1.11 in (28 mm)
2.00 in (51 mm)
1.60 in (41 mm)
R*
K* L
M
N
O
0.33 in (8.3 mm)
0.65 in (16.5 mm)
0.75 in (19 mm)
1.73 in (44 mm)
1.33 in (34 mm)
P 0.74 in (19 mm)
Q 0.32 in (8 mm)
R* 0.29 in (7 mm)
* Applies to studded K case only.
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
20
LED Dimming Driver
Hi-lume® A-Series LTE
Architectural Dimming
369543d
21 07.08.14
K Case: Side Entry Connector Location Dimensions (Non-Studded)
S
U
T
S
T
U
V
1.38 in (35 mm)
0.64 in (16 mm)
0.88 in (22 mm)
1.53 in (39 mm)
V
M Case: Case Dimensions
C
B
A
A
B
C
D
14.125 in (359 mm)
13.68 in (347 mm)
(mounting center)
1.18 in (30 mm)
1.00 in (25 mm)
D
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
21
LED Dimming Driver
Hi-lume® A-Series LTE
Architectural Dimming
369543d
22 07.08.14
Wiring
Controls Requiring Neutral
Note: Colors shown correspond to terminals on driver.
Wiring Diagram
LutronR
Neutral-wire
Forward
Phase
Dimmer
Line
Dimmed Line (Black)
+V (Red)2
Hi-lume ®
A-Series LED
Dimming Driver
Neutral
Ground1
Neutral
LED
Light
Engine
Neutral (White)
Ground (Green)1
–V (Black)2
Ground1
Ground wire connection available on K case models only. Fixture and driver case must be grounded in accordance with local and national electrical
codes.
2
For maximum driver-to-LED light engine wire length, see charts in Driver Wiring and Mounting section.
1
Compatible Controls: Lutron® Neutral-wire Dimmers
Guaranteed performance specifications with the controls listed in
the chart below.
For assistance selecting controls, contact our LED Center of Excellence
at 1.877.346.5338 or LEDs@lutron.com
Product
Part Number
Low-End Setting/Load-Type Setting*
A
A: Not Ganged
B
B
B
C
B
Drivers per Control
B: End of Gang C: Middle of Gang
Maestro
MRF2Wireless® dimmer 6ND-120-
Trim low-end per Advanced
Programming Mode App Note
(Lutron® P/N 048370)
1 – 8
1 – 8
1 – 8
HomeWorks® QS
adaptive dimmer
HQRD-6NA-
LED Lutron® A-Series 2-Wire
1 – 8
1 – 8
1 – 8
HomeWorks® QS
600 W dimmer
HQRD-6ND-
LED Lutron® A-Series 2-Wire
1 – 8
1 – 8
1 – 8
HomeWorks® QS
1000 W dimmer
HQRD-10ND-
LED Lutron® A-Series 2-Wire
1 – 13
1 – 13
1 – 13
Stanza® dimmer
SZ-6ND-
Trim low-end per Dimmer Installation
Guide
1 – 8
1 – 8
1 – 8
RadioRA® 2
adaptive dimmer
RRD-6NA-
Hi-lume® A-Series LTE LED Driver
2-Wire
1 – 8
1 – 8
1 – 8
RadioRA® 2
1000 W dimmer
RRD-10ND-
Set Device type to “INC/MLV Neutral
Dimmer”; Set High-End Trim to 99%;
Set Low-End Trim to 35%
1 – 13
1 – 13
1 – 13
* Setting the low-end trim and load type is necessary to ensure optimal performance and 1% dimming capability.
Note: For information about Legacy Product use in existing control application, contact LEDs@lutron.com
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
22
LED Dimming Driver
Hi-lume® A-Series LTE
Architectural Dimming
369543d
23 07.08.14
Wiring (continued)
Controls Requiring Neutral (continued)
Note: Colors shown correspond to terminals on driver.
Wiring Diagram
LutronR
Dimming
Module/Panel
Line
Dimmed Line (Black)
+V (Red)2
Hi-lume ®
A-Series LED
Dimming Driver
Neutral
(White)
Neutral
Ground1
Neutral
Ground (Green)1
LED
Light
Engine
–V (Black)2
Ground1
Enclosure must be grounded in accordance with local and national electrical codes. Ground provided by grounding of junction box or by using the green
ground wire connection.
2
For maximum driver-to-LED light engine wire length, see charts in Driver Wiring and Mounting section.
1
Compatible Controls: Lutron® Dimming Modules/Panels
Guaranteed performance specifications with the controls listed in the chart below.
For assistance selecting controls, contact our LED Center of Excellence at
1.877.346.5338 or LEDs@lutron.com
Product
Part Number
Drivers per Control Low-End Setting/Load-Type Setting*
HomeWorks® QS wallbox power module
HQRJ-WPM-6D-120-
1 – 10 (per output);
26 total per module LED Lutron® A-Series 2-Wire
HomeWorks® wallbox power module
HWI-WPM-6D-120
1 – 10 (per output);
26 total per module Set load type to “GRX‑FDBI or GRX-TVI”
GRAFIK Eye® QS control unit
QSGR-,
QSGRJ-
1 – 10 (per output);
26 total per unit
GRAFIK Eye® 3000 control unit
GRX-3100-,
GRX-3500-
1 – 10 (per output);
26 total per module Set load type to “GRX‑FDBI or GRX-TVI”
RPM-4U module (LCP, HomeWorks® QS, HW-RPM-4U-120,
GRAFIK SystemsTM, Quantum®)
LP-RPM-4U-120
1 – 26 (per output);
26 total per module
RPM-4A module (LCP, HomeWorks® QS, HW-RPM-4A-120,
GRAFIK SystemsTM, Quantum®)
LP-RPM-4A-120
1 – 13 (per output);
26 total per module
GP dimming panels
1 – 26
Various
Set load type to “Fluorescent Module”
LED Lutron® A-Series 2-Wire
Set load type to “2-1”
LED Lutron® A-Series 2-Wire
Set load type to “2-1”
Set load type to “2-1”
* Setting the low-end trim and load type is necessary to ensure optimal performance and 1% dimming capability.
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
23
LED Dimming Driver
Hi-lume® A-Series LTE
Architectural Dimming
369543d
24 07.08.14
Wiring (continued)
Controls Not Requiring Neutral
Note: Colors shown correspond to terminals on driver.
Wiring Diagram
Line
LutronR
Non-Neutral
Forward
Phase
Dimmer
Dimmed Line (Black)
+V (Red)2
Hi-lume ®
A-Series LED
Dimming Driver
Ground1
Neutral
LED
Light
Engine
Neutral (White)
Ground (Green)1
–V (Black)2
Ground1
Ground wire connection available on K case models only. Fixture and driver case must be grounded in accordance with local and national
electrical codes.
2
For maximum driver-to-LED light engine wire length, see charts in Driver Wiring and Mounting section.
1
Compatible Controls: Lutron® Non-Neutral Dimmers
Guaranteed performance specifications with the controls listed
in the chart below.
For assistance selecting controls, contact our LED Center of Excellence
at 1.877.346.5338 or LEDs@lutron.com
Product
Ariadni® C•L®
250 W dimmer
Part Number
Low-End Setting/Load-Type Setting*
AYCL-253P-
Set low-end trim dial to 1 o’clock.
Adjust slightly if needed. See Figure 1
under ‘Dimmer Range Adjustment’
section in the Dimmer Installation
Guide for how to adjust low-end trim.
DVCL-253P-
Set low-end trim dial to 10 o’clock.
Adjust slightly if needed. See Figure 1
under ‘Dimmer Range Adjustment’
DVSCCL-253P- section in the Dimmer Installation
Guide for how to adjust low-end trim.
Diva® C•L® 250
W dimmer
A
A: Not Ganged
B
B
B
C
B
Drivers per Control
B: End of Gang C: Middle of Gang
1 – 8
1 – 8
1 – 8
1 – 8
1 – 8
1 – 8
1 – 8
1 – 8
1 – 8
* Setting the low-end trim and load type is necessary to ensure optimal performance and 1% dimming capability.
Note: For information about Legacy Product use in existing control application, contact LEDs@lutron.com
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
24
LED Dimming Driver
Hi-lume® A-Series LTE
Architectural Dimming
369543d
ELECTRICIANS AND CONTRACTORS
FACILITIES MANAGERS
Driver Leads
SERVICE
Maximum driver-to-LED light engine wire length for
Constant-Current Drivers:
Maximum Lead Length
Wire Gauge
200 mA to
700 mA
710 mA to
1.50 A
1.51 A to
2.10 A
18 AWG (0.75 mm2)
30 ft (9 m)
15 ft (4.5 m)
10 ft (3 m)
16 AWG (1.5 mm )
35 ft (10.5 m)
25 ft (7.5 m)
15 ft (4.5 m)
14 AWG (2.5 mm2)
50 ft (15 m)
40 ft (12 m)
25 ft (7.5 m)
12 AWG (4.0 mm2)
100 ft (30 m)
60 ft (18 m)
40 ft (12 m)
2
Maximum driver-to-LED light engine wire length for
Constant-Voltage Drivers:
Maximum Lead Length
Wire Gauge
10 to 20 V-
20.5 to 40 V-
40.5 to 60 V-
18 AWG (0.75 mm2)
10 ft (3 m)
15 ft (4.5 m)
30 ft (9 m)
16 AWG (1.5 mm )
15 ft (4.5 m)
25 ft (7.5 m)
50 ft (15 m)
14 AWG (2.5 mm2)
25 ft (7.5 m)
40 ft (12 m)
75 ft (22.5 m)
12 AWG (4.0 mm )
40 ft (12 m)
60 ft (18 m)
100 ft (30 m)
2
2
25 07.08.14
Warranty
For warranty information, please visit
http://www.lutron.com/BallastDriverWarranty.pdf
Replacement Parts
When ordering Lutron® replacement parts please
provide the full model number. Consult Lutron if you
have any questions.
Further Information
For further information, please visit us at
www.lutron.com/hilumeLED or contact our
LED Control Center of Excellence at 1.877.346.5338
or LEDs@lutron.com
Wiring and Grounding
Driver and lighting fixture must be grounded.
Drivers must be installed per national and local
electrical codes.
LED Load Replacement
For Class 2 rated drivers, the LED load can be
changed while the driver is installed and powered.
Maximum Driver Operating Temperature
Driver case temperature (t c ) must not exceed UL
conditions of acceptability in end product.
For 50,000 hour lifetime, driver case temperature (t c )
must not exceed 65 °C.
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
25