SGP Stock
RUBBER HOSES FOR HIGH-TEMPERATURE WATER／HOT-WATER HOSES／HOSE BANDS
Printed in Red
The volume discount rate is also applicable to alteration cost.
All price & lead time are to be quoted.
■Rubber Hose for High-Temperature Water
d
D
KGH (Rubber Hose for High-Temperature Water)
L
Internal／Outside rubber
Heat resistant synthetic rubber (EPDM)
Applicable for liquid-water
D
Part Number
Type
No.
d
18 9.7
KGH
U/Price 1∼9
L
(unit: m)
L1
L2
L5
L10
L20
Maximum allowable pressure Allowable temperature range Minimum bending radius
MPa (kgf/cm2)
mm
℃
L30
125
10 20 30
3
1.0(10.2)
To be quoted on price & lead time above Max. Q'ty.
Check the size of the outer diameter of the hose nipple on usage.
Although the inside diameter (d) of the hose is 9.7, applicable for hose
nipple of outside diameter of between 9.7 and 12mm.
Reinforcing wire
Mass
kg/m
120
−30∼120
0.23
Notes
・When installing the hose nipple, fix it with a hose band (MHBS).
・This product is for warm water use. NEVER use it with oil.
Also, do not use these hoses in an environment where they are likely to come into contact with oil.
・Inspect the hoses periodically, and if they show signs of cracking, hardening or other changes,
replace them.
・The hoses expand or contract depending upon whether they are pressurized or depressurized, so
allow a certain margin of length.
Socket
Outer diameter of Hose Nipple
Part Number −
KGH3
Inside diameter
of Hose
−
L
10
5
For area out of Singapore please refer to P.i.
Hose Nipple
■Hot-Water Hose
d
D
MHW (Hot-Water Hose)
Tetronic
blade
L
Applicable for liquid-water
D
13.5
d
Part Number
Type
No.
8
18
12
22
15
L
(unit: m)
Soft vinyl chloride
U/Price 1∼9
L10
L20
Part
Number
L50
1
MHW
2
MHW1
10 20 50
MHW2
MHW3
3
Part Number −
MHW2
−
Allowable Pressure Destructive pressure Min. bend radius Allowable
kPa (kgf/cm2) kPa (kgf/cm2) (room temp.) Temperature Range
0∼1000(0∼10)
5500(55)
56
0∼800(0∼8)
4000(40)
84
6000(60)
105
0∼60℃
■Quantity discount rate
L
Quantity
Rate
10
1∼9
−
10∼19 20∼49 50∼100
5%
10%
15%
T
A
5
For area out of Singapore please refer to P.i.
■Hose Band
External hose (mm) Max. tightening torque
MHBT
Diameter
N・cm {kgf・cm}
φ13∼20
350{35}
φ18∼25
1∼9
−
■Features
10∼19
5%
1∼9
1
MHBT
2
For area out of Singapore please refer to P.i.
■Quantity discount rate
Quantity
Rate
U/Price
No.
¡ Printed in Red
Part Number
MHBT1
SUS430
Safety cap: PE
Bolt : SWCH10K
Part Number
Type
20∼49
10%
50∼100
15%
MHBT has a safety cap and you are free from concerns to hurt yourself.
Stocks Availability Subjected to Prior Sales.